Waterproofing Approved HK 20120202
Waterproofing Approved HK 20120202
Waterproofing Approved HK 20120202
UNDERGROUND STRUCTURES
Underground structures level: the parts of a building which are most often in
contact with water and aggressive elements in the ground.
All structures below ground level come into contact with the humidity in the
ground or with the water table and must be protected to guarantee the life-span of
buildings. If no suitable protection is applied, there are no construction materials
with the capacity of resisting the various factors which are present below ground
level. MAPEI offers a wide array of repair and protection solutions which guarantee
an efficient solution for any construction element.
01
UNDERGROUND STRUCTURES
Mapeproof Mapeproof LW
Bentonite waterproofing sheets for structures Bentonite waterproofing sheets for underground
below ground level. structures.
Suitable for both horizontal and vertical surfaces. For use on horizontal and vertical structures below
ground level with a maximum water table of 5
For both post-cast and pre-cast walls. metres.
For both post-cast walls and pre-cast walls.
EN 1504-2 (C)
PRINCIPLES
MC-IR
Idrosilex Pronto
EN 1504-2 SURFACE PROTECTION
SYSTEMS FOR CONCRETE
PVC waterstop for sealing structural joints. Osmotic cementitious mortar suitable for contact
with drinking water.
For waterproofing structural joints in civil,
industrial and hydraulic constructions. For waterproofing foundations, walls, cellars,
basements, lift-rooms, swimming pools, canals and
reservoirs. Also safe for use on containers holding
drinking water.
To be applied by brush, trowel or spray.
Idrosilex
Waterproofer for cementitious mortars.
For waterproofing basements, swimming pools,
reservoirs, tunnels etc.
Available in powder and liquid form.
02
UNDERGROUND STRUCTURES
IN COMPLIANCE WITH
EUROPEAN STANDARD
EN 1504-2 (C)
Mapelastic Lamposilex
Foundation
PRINCIPLES
PI-MC-IR
EN 1504-2 SURFACE PROTECTION
SYSTEMS FOR CONCRETE
Two-component, flexible cementitious mortar for Ultra-fast setting and drying hydraulic binder for
waterproofing. plugging water leaks.
For concrete surfaces subject to negative and Use Lamposilex to plug any source of water, even
positive hydrostatic pressure. under pressure, in basements, tunnels, subways etc.
For foundation walls, car-parks, environments For sealing watertight rigid joints in hydraulic
below ground level, water channels and concrete structures, sewers, tanks and canals.
swimming pools.
To be applied by roller or spray.
For horizontal and vertical surfaces at a thickness of
at least 2 cm.
Foamjet T Plastimul
High viscosity ultra rapid setting two-component Solvent-free, bitumen waterproofing emulsion for
polyurethane resin to be injected. general purpose use.
For consolidating and waterproofing structural For horizontal and vertical surfaces.
elements subject to high pressure water ingress.
Ultra quick setting. For foundations, retaining walls, layers beneath
tiles, etc.
For waterproofing cracked concrete and masonry
structures such as tunnels, shafts, dams, canals,
bulkheads, flooring or beds subject to strong water
ingress.
It penetrates several hundred micron thick cracks.
For sealing even in presence of water infiltrations.
03
UNDERGROUND STRUCTURES
SELECTION CHART
Construction joint
Brick walls with
Through bodies
Post-cast walls
Structural joint
Pre-cast walls
negative lift
Pile heads
Lift shaft
Plateau
UNDERGROUND STRUCTURES
Mapeproof
Mapeproof LW
Mapeproof Mastic
Mapeproof Swell
Idrostop
Idrostop B25
Mapeband
Mapeband TPE
Idrostop PVC BI-BE
Idrosilex
Idrosilex Pronto
Mapelastic Foundation
Lamposilex
Resfoam 1KM
Foamjet F - Foamjet T
Plastimul
Plastimul 1K Super Plus
Plastimul 2K Plus
Plastimul 2K Super
Mapeplan TU S
Mapeplastic TU
After carrying out the render with Planitop HDM Maxi.
04
MAPEI China Limited
9th Floor Linkchart Centre,
2 Tai Yip Street, Kwun Tong,
Kowloon, Hong Kong
Tel. +852-2148 6816
(HK) 02/12