Flam BICC For Web PDF
Flam BICC For Web PDF
Flam BICC For Web PDF
Page
Introduction ........................................................................................................................... 1
FlamBICC 1 ..........................................................................................................................10
FlamBICC 2 ..........................................................................................................................12
FlamBICC 3 ..........................................................................................................................14
FlamBICC 4 ..........................................................................................................................16
FlamBICC 6 ..........................................................................................................................21
2
INTRODUCTION
Established in 1979, Ducab is the leading cable manufacturing company in the region and is equally owned by
the Governments of Dubai and Abu Dhabi. Ducab has 3 manufacturing sites and 6 independent manufacturing
facilities that support it's continuous growth, one in Jebel Ali and two in Abu Dhabi Industrial City. Ducab-HV,
inaugurated in November 2011, is a joint venture between Ducab, ADWEA and DEWA offering High Voltage
cable systems up to 400 kV. Ducab-HV will sell cable systems in the voltage range 66kV (66,000 Volts) to 400
kV (400,000 Volts) covering the highest voltage currently used in the GCC.
To meet the growing demand of customers around the region and the world, Ducab continues to expand its
world-class facilities across the Middle East, North Africa, Europe, Australia and India. Ducab prides itself on
setting and maintaining the highest quality standards of power cables. Experienced and highly skilled employees
operate state-of-the-art equipment, and conduct extensive testing at every phase of production.
When it comes to advanced cable solutions, Ducab continues its status as the superbrand across the world in
40 countries. Ducab product range covers High Voltage cables up to 400 kV, Ducab Powerplus Medium Voltage
cables up to 33 kV, Low Voltage power cables, Control & Auxiliary, Wiring and Lead-Sheathed cables, Ducab
Smokemaster - Low Smoke Zero Halogen (LSZH) Cables, THHN/THWN cables, Instrumentation and Pilot
cables, Cable components and cable accessories, Installation of cables, as well as Copper rod manufactured
in Ducabs own Copper rod plant.
This catalogue provides working information on FlamBICC (Fire Resistant Cables) . Separate catalogues are
available for the remaining range of Ducab Cables.
ORDERING ADVICE
Due to the wide range of cables in the catalogue, it is advisable, when ordering, to provide as much information
as possible. Please use the following table as a guide:
2. Voltage designation.
3. Number of cores.
4. Conductor size.
8. Any other special requirement, any additional requirement, drum weight limitation, etc.
* Cables are normally supplied in lengths of 100 metres, 500 metres and 1000 metres depending on
conductor size. Other lengths can be supplied if required.
For any specialist advice and assistance on the entire Ducab product range contact the Technical Department,
Dubai Cable Company (Private) Limited, P. O. Box 11529, Dubai, U. A. E., Tel: 971 4 815 8888, Fax: 971 4 815 8111.
1
CUSTOMER SERVICE
Ducab is the premier cable manufacturer in the United Arab Emirates and, since 1979, has been meeting the
requirements of customers throughout the GCC, Middle East and Asian markets. Ducab cables are preferred
for the following reasons:
PRODUCT QUALITY
Ducab is committed to supplying its customers with the highest quality of product and of
service. Ducabs cables have been type approved by recognized certifying bodies such
as BASEC UK (British Approval Service for Cables), Lloyds Register of the UK, KEMA
Netherland, LPCB UK ( Loss Prevention Certification Board), ESMA (Emirates Authority
for standardization and Metrology). They fully conform to BS, IEC other international and
national specifications.
In addition, Ducab was presented with the Dubai Quality Award 1994, for the best local industrial company of
the year. Ducab won Dubai Quality Gold Category award twice, in 1998 and in 2004. The Gold Award rewards
the most distinguished companies which are judged to be world class and Ducab is the only manufacturing
company in the region to win such acclaim.
Ducab has won the Sheikh Mohammed Bin Rashid Al Maktoum (MRM) Business Excellence Award in
manufacturing category in 2009. Recognizing quality products and services, Ducab has also won the
Superbrand award for 4 years consecutively from 2009.
RELIABILITY
Specifying the right cable for a particular application is the first step. The key to reliability however, is in the
manufacturing process. The cable must be free from material and manufacturing defects, and weaknesses that
will be revealed in service.
Ducab constantly monitors its manufacturing processes and operates stringent quality assurance procedures
to give long term reliability. This is of vital significance where cables are to be installed in locations where future
access would be difficult and this is where Ducabs reputation and resources give peace of mind.
PERFORMANCE
Optimum cable performance can be provided only by a company such as Ducab, with access to the latest
developments in materials technology. In addition, Ducabs knowledge of application requirements throughout
the Middle and Far East is an assurance of high performance.
Our experienced Technical Staff can provide guidance on cable selection and installation and can ensure that
you get the right cable for the job.
2
HEALTH & SAFETY MANAGEMENT SYSTEM CERTIFIED TO OHSAS 18001
Ducab uses only tried and tested materials and processes in full compliance
with all relevant British and International Standards. Our cables are therefore manufactured
for safe use without risk to health on the understanding that users will exercise the same degree of care in their
selection and application.
Safety is an important issue for Ducab, and the strictest standards are adhered to throughout the company.
Ducab is proud of its safety record and has been awarded RoSPA (Royal Society for the Prevention of Accidents)
Gold Awards for safety from 1991 to 1999. From 2000 onward, Ducab was awarded the prestigious Presidents
Award for Health and Safety which is a recognition of Ducab winning 10 consecutive annual Gold awards and
acknowledges Ducabs total commitment to health and safety. In 2002, Ducab was declared the joint winner of
the Manufacturing Industry Sector Award from RoSPA.
Ducab is the first organisation in the Middle East to receive accreditation to OHSAS 18001 by BASEC (British
Approvals Service for Cables). Certification to OHSAS 18001 provides a recognisable Occupational Health and
Safety Management standard against which an organisations management systems can be assessed and
certified. Based on the structure of OHSAS 18001, the standard requires continual improvement in health and
safety related activities.
Ducabs Quality Management System conforms to the ISO 9001 International Quality
System Standard and is certified by BASEC (British Approvals Service for Cables),
a specialist certifying body for cables who are an internationally recognised quality
authority accredited in the UK and throughout the world.
Certification to the ISO 9001 International standard demonstrates that Ducab has
drawn up written procedures to ensure full compliance with all requirements of the standard and that these
procedures are followed by every department in the company, thus ensuring that goods leaving Ducabs factory
are of the highest quality and meet each customers requirements in every respect.
Ducab is particularly proud to have achieved certification to the stringent ISO 9001 standard as it is an
independent conformation that the company designs, manufactures and tests cables consistently to accepted
standards. ISO 9001 is widely used throughout Europe, and is therefore a reassurance to Ducabs customers
that the products and service supplied by the company are equal to the best in the world.
3
ENVIRONMENTAL MANAGEMENT SYSTEM CERTIFIED TO ISO 14001
Certification to the ISO 14001 International standard shows that Ducab has a well defined structure and
established working practices aimed at limiting its impact on the environment. Measurement and monitoring of
effects, issuing work instructions, training of personnel and taking corrective actions are all essential elements
to limiting the impact on the environment. Ducab has set improvement targets to reduce the significant
environmental impacts associated with its activities.
Ducab is proud to be the first cable manufacturer in the region to achieve certification to ISO 14001 and this
certification along with its quality, business success and safety record demonstrates that Ducab is a world class
organisation and can hold its head up to any business community throughout the world.
BASEC CERTIFICATION
Ducab is also proud to hold a Process capability certification issued by BASEC (British Approvals Service for
Cables) for several cables in its product range.
DUCAB SHAREEK
Ducabs customer satisfaction programme is designed to ensure that customers
receive a consistently high level of service from Ducabs dedicated staff.
APPROVAL CERTIFICATES
4
Complete Fire Safety Solutions
In the standard BS 8519, cables are classied suitable for LS (Life Safety) and FF (Fire Fighting) system. It separates
cables in three categories.
All Fire Fighting systems are required to function for 120 minutes. Cables for these systems would aid re ghters in
carrying their role and shall include SHEVS (Smoke & Heat Exhaust Ventilation System), smoke curtains, sprinkler
system and re-ghting lift.
Power Supplies
Cable selection
Inverters
Junction boxes
5
As can be noted, BS 8519 contains mainly six different categories of cables, three each for power and control
cables depending upon escape / survival times of 30, 60 or 120 minutes . The table below will simplify the task of
cable selection from DUCAB range of products.
LS 60 mins
BS EN 50200 PH60 & 120 mins
Category 2 Control FlamBICC 4
to BS 8434-2
Fire Fighting (FF) FF 120 mins Category 3 Power BS 8491 120 mins FlamBICC 6
6
Fire Performance Cable Selection Guide
FlamBICC 2
FlamBICC 1
FlamBICC 3
FlamBICC 4
FlamBICC 6
Codes of Practice
BS 5266 Emergency Lighting
cable
BS5266 Enhanced
Emergency Lighting cable
Emergency Lighting
BS 5266 Emergency Lighting
cable system
BS 5266 Enhanced
Emergency Lighting cable system
BS 5839 Standard Grade
Fire Alarm
BS 5839 Enhanced Grade
Smoke, Heat & Exhaust
BS 8519
Ventilation System (SHEVS)
BS 8519 Catagory 1 Control
BS 8519 Catagory 2 Control
BS 8519 Catagory 3 Control
Power and Control
BS 8519 Catagory 1 Power
BS 8519 Catagory 2 Power
BS 8519 Catagory 3 Power
General BS 9999
Manufacturing Standards
BS 7629
BS 7846
Fire Resistance Tests
BS 6387 C W & Z
BS EN 50200 PH30
BS EN 50200 PH60
BS EN 50200 PH120
BS 8434-2
BS 7846 F2
BS 7846 F30, F60, F120
BS 8491
IEC 60331
Fire Reaction Tests
Low Smoke Zero Halogen BS EN 50267, (IEC 60754)
(LSZH) BS EN 50268, (IEC 61034)
7
INTRODUCTION
Ducab FlamBICC cables are special fire resistant cables designed to survive and operate during fire conditions.
In order to suit different application requirements Ducab offers FlamBICC cables in the following range,
FlamBICC 1: These are single core Fire Resistant cables with XL-LSZH insulation to meet C-W-Z test as per BS
6387 for small sizes and IEC 60331 for large sizes.
FlamBICC 2: These are screened cables designed as per BS 7629 and are mainly used in fire detection, voice
alarm, emergency lighting etc.
FlamBICC 3: These are single and multicore Fire Resistant cables with insulation and sheath to meet C-W-Z
test as per BS 6387 for small sizes and IEC 60331 for large sizes.
FlamBICC 4: These are multi-core armoured cables designed as per BS 7846 with steel wire armour
construction to meet category F2 fire test (C-W-Z test as per BS 6387)
FlamBICC 6: These are multi-core armoured cables designed as per BS 7846 with steel wire armour
construction to meet category F120 fire test as per BS 8491. During F120 fire test direct mechanical impact and
water jet is provided on the cable during fire test.
8
Ducab range of FlamBICC cable is a highly sophisticated product for use in special application. There are various
areas of application for Fire Resistant cables, which include:
Areas where people will remain in occupation for short time eg. schools, shopping malls, mass transit
systems like metro stations etc.
Services where circuit integrity is very important under fire conditions eg. special equipment in hospital
Essential safety circuit eg. fire detection, fire alarm, voice alarm etc.
In large buildings where fire strategy involves evacuation of occupants in phased manner.
9
1
FLAMBICC 1
These are single core re resistant cables with approval from Loss Prevention Certication Board (LPCB), UK for
use in emergency safety circuits to maintain circuit integrity under re conditions.
CONSTRUCTION
Copper conductor: Plain annealed stranded class 2 conductor to BS EN 60228
CHARACTERISTICS
General: Ducab FlamBICC 1 cables are designed for laying in
conduit or in cable trunking where re resistance is of
paramount importance.
Approvals: LPCB approved
Voltage grade: 600 / 1000 V
Fire resistance: C-W-Z test as per BS 6387 for small sizes and IEC
60331-21 for large sizes which cannot t in a conduit.
Cables comply IEC 60331-21 re test at increased
temperature of 950C which is higher than that speci-
ed by the standard.
Acid gas emission: Less than 0.5% when tested to IEC 60754 & BS EN
50267
Low smoke emission: As per IEC 61034 & BS EN 50268
CORE IDENTIFICATIONS
Greey/Yellow Black
Blue Gray
Red White
Brown
10
1
TECHNICAL DATA
Technical data for Ducab Fire Resistant Single Core Cables with stranded copper conductors 600 / 1000 V
Maximum
Nominal Approximate Approximate conductor Current rating Current rating Voltage drop Voltage drop
conductor area overall diameter cable weight resistance at (1 AC) (3 AC) (1 AC) (3 AC)
20C
mm2 mm kg/km Ohm/km Amp Amp mV/A/m mV/A/m
4 6.4 75 4.61 42 37 12 10
Current rating based on installation "enclosed in conduit on a wall or in trunking" in line with BS 7671 (IEE Wiring Regulations)
Laying condition: 30C ambient temperature & 90C operating temperature. For other ambient temperatures
appropriate rating factors should be applied.
Rating factor 0.8 0.7 0.65 0.6 0.57 0.54 0.52 0.5
11
2
FLAMBICC 2
These are pliable Fire Resistant screened cables having low emission of smoke and corrosive
gases when affected by re which are designed to meet re resistance test of BSEN 50200 : 2000
Class PH30.
CONSTRUCTION
Conductor: Plain annealed copper conductor complying with BS EN 60228, class 1 or class 2
Screen: Laminated Aluminium tape screen in contact with full size tinned annealed copper
circuit protective conductor
CHARACTERISTICS
General: Ducab FlamBICC 2 are screened cables designed as per BS
7629 for applications requiring standard re resistance.
Approval: LPCB Approval to BS 7629-1, BS 5839-1 and BS EN 50200
Class PH30
Acid gas emission: Less than 0.5% when tested to IEC 60754 & BS EN 50267
Packaging 100 meter reels: Other packaging and lengths available on re-
quest
We can offer the cables with new as well as old core colour code as mentioned in next page.
12
2
Max Max
Nom Di- Approx Approx
Nom Min Approx Conductor Conductor
ameter of Capacitance Capaci-
No. of Conductor No. of Insulation Nom O.D. Bending Cable Resist- Resist-
Conductor (Adjacent tance (Core
Cores Area (mm) Wires Thickness (mm) Radius Weight ance 20 ance 70
/ wire Cores) (pF/ to Screen)
(mm) (mm) (kg/km) C (ohm/ C (ohm/
(mm) km) (pF/km)
km) km)
CORE IDENTIFICATIONS
CORE IDENTIFICATIONS NEW CORE IDENTIFICATIONS OLD
2 CORE 2 CORE
Brown Blue Red Black
3 CORE 3 CORE
Brown Black Grey Red Yellow Blue
4 CORE 4 CORE
Blue Brown Black Grey Red Yellow Blue Black
13
3
DUCAB FLAMBICC 3
Ducab FlamBICC 3 cables are single and multicore Fire Resistant cables with insulation and sheath to meet
C-W-Z test as per BS 6387 for small sizes and IEC 60331 for large sizes
The single core cables are approved by Loss Prevention Certication Board (LPCB), UK for use in emergency
safety circuits to maintain circuit integrity under re conditions.
CONSTRUCTION
Copper Conductor: Plain annealed stranded class 2 conductor to BS EN 60228
CHARACTERISTICS
General: Ducab FlamBICC 3 cables are designed for laying
in conduit or on trays where re resistance is of
paramount importance.
Approvals: LPCB approved for single core cables
Voltage grade: 600 / 1000 V
Fire resistance: C-W-Z test as per BS 6387 for small sizes and
IEC 60331-21 for large sizes which cannot t in a
conduit. Cables comply IEC 60331-21 re test at
increased temperature of 950C which is higher
than that specied by the standard.
Acid gas emission: Less than 0.5% when tested to IEC 60754 & BS
EN 50267
Low smoke emission: As per IEC 61034 & BS EN 50268
CORE IDENTIFICATIONS
STANDARD: SHEATH COLOUR:
Black Black
(Other colours as per request) (Other colours as per request)
14
3
TECHNICAL DATA
Technical data for DUCAB fire resistant Single Core Sheathed Cables with stranded copper conductors 600/1000 V
Current rating based on installation "enclosed in conduit on a wall or in trunking" in line with BS 7671 (IEE Wiring
Regulations)
Laying condition:
30C ambient temperature & 90C operating temperature.
For other ambient temperatures appropriate rating factors should be applied.
Rating factor 1.02 1.00 0.96 0.91 0.87 0.82 0.76 0.71
15
4
DUCAB FLAMBICC 4
Ducab FlamBICC 4 cables are multi-core armoured cables designed as per BS 7846
with steel wire armour construction to meet category F2 re test (C-W-Z test as per
BS 6387).
CONSTRUCTION
Conductor: Plain annealed Copper, stranded class 2
conductor to BS EN 60228
Bedding: LSZH
CHARACTERISTICS
General: Ducab FlamBICC 4 are armoured cables designed as per BS
7846 to meet C-W-Z re test as per BS 6387.
Approvals: LPCB and BASEC approved for 2, 3 and 4 core cable designs
Voltage grade: 600 / 1000 V
Fire resistance: C-W-Z test as per BS 6387
CORE IDENTIFICATIONS
STANDARD ALTERNATIVE*
16
4
2 Core Cables
Fire resistant cables. Two Core Armoured Cables 600/1000 V Grade with stranded copper conductors (BS 7846)
Approximate Diameter Current
Maximum Maximum rating on
Nominal
Approximate conductor armour perforated Voltage drop
conductor Under Overall
Over armour cable weight resistance resistance cable (1 C)
area armour diameter at 20C at 20C trays / free
air
mm2 mm mm mm kg/km Ohm/km Ohm/km Amp mV/A/m
17
4
3 Core Cables
Fire resistant cables. Three Core Armoured Cables 600/1000 V Grade with stranded copper conductors (BS 7846)
18
4
4 Core Cables
Fire resistant cables. Four Core Armoured Cables 600/1000 V Grade with stranded copper conductors (BS 7846)
Approximate Diameter Current
Maximum Maximum rating on
Nominal
Approximate conductor armour perforated Voltage drop
conductor Under Overall
Over armour cable weight resistance resistance cable (3 C)
area armour diameter at 20C at 20C trays / free
air
mm2 mm mm mm kg/km Ohm/km Ohm/km Amp mV/A/m
19
4
Multicore Cables
Fire resistant cables. Armoured Auxiliary Cables 600/1000 V Grade with stranded copper conductors (BS 7846)
* Multi circuit means all conductors are loaded equally and operating in close vicinity
Installation conditions for above rating:
Ambient Air Temperature 30C
Conductor operating temperature 90C
20
6
DUCAB FLAMBICC 6
Ducab FlamBICC 6 (BS8519 Category 3 Power Cables) are special re resistant cables designed to survive
and operate during highly onerous re conditions. These are designed as per BS 7846 standard and are LPCB
approved for F120 re test as per BS 8491 standard. These cables have received the BASEC approval too.
As described in BS 8519, re resistant cables are classied for Life Safety and Fire Fighting system with different
re survival time of 30 minutes, 60 minutes or 120 minutes. The FlamBICC 6 cables meet 120 minutes re survival
test. During the F120 re survival test as per BS 8491 the same cable sample is subjected to re + mechanical
shock with direct impact on the cable + water jet hitting the cable which is applied through a nozzle. All Fire
Fighting systems are required to function for 120 minutes.
CONSTRUCTION
Conductor: Plain annealed Copper, stranded class 2 conductor to BS EN 60228
Outer sheath: Robust LSZH sheath with Black colour as standard, other colours
upon request
CHARACTERISTICS
General: Ducab FlamBICC 6 are armoured cables designed as per BS 7846 to meet
F120 re test as per BS 8491.
Approvals: LPCB and BASEC approved for 3 and 4 core cable designs
Acid gas emission: Less than 0.5% when tested to IEC 60754 & BS EN 50267
CORE IDENTIFICATIONS
STANDARD ALTERNATIVE*
21
6
Fire resistant cables. Three Core Armoured Cable 600/1000 V Grade with stranded copper
conductors (BS 7846)
22
6
INSTALLATION GUIDELINE
FOR FLAMBICC 4 AND FLAMBICC 6 CABLES
23
Areas of application for Fire Resistant Cables:
Hospitals Hotels
Malls
24