Quick Start Guide
Quick Start Guide
Quick Start Guide
Version 1.01
Welcome
Thank you for purchasing our DVR!
This quick start guide will help you become familiar with our DVR in a very short time.
Before installation and operation, please read the following safeguard and warning carefully!
Note: All the installation and operations here should conform to your local
electric safety rules.
3. HDD Installation
This series DVR has only one SATA HDD. Please use HDD of 7200rpm or higher.
You can refer to the Users Manual for recommended HDD brand.
Please follow the instructions below to install hard disk.
1. Loosen the screws of the 2. Fix four screws in the HDD 3. Place the HDD in accordance with
upper cover and side panel. (Turn just three rounds). the four holes in the bottom.
2
4. Turn the device upside down 5. Fix the HDD firmly. 6. Connect the HDD cable and
and then turn the screws in power cable.
firmly.
in the chassis.
Note:
You can connect the HDD data cable and the power cable first and then fix the HDD in the
device.
Please pay attention to the front cover. It adopts the vertical sliding design. You need to
push the clip first and then put down.
3
4. Specification
Parameters CP-UVR-0401K1
System Main Processor Industrial embedded micro controller
OS Embedded LINUX
Video Video Encode H.264
Parameters Standard
Encode 1080P(1~15fps) /720P/960H/D1/HD1/2CIF/CIF/QCIF
Resolution
Video Frame HDCVI125f/sPAL1~30f/sNTSC
Rate CVBS1~25f/sPAL1~30f/sNTSC
Video Frame 2048Kbps-4096Kbps
Rate For 1080P/720P: default setup is 2Mbpsmax supports 4Mbps.
For 960H: default setup is 1Mbpsmax supports 3Mbps.
Bit Stream Type Video stream/composite stream
Dual-Stream Support
Audio Encode G.711A/G.711U/PCM
Parameters Standard
Audio Sampling 8KHz16Bit
Rate
Audio Bit Rate 64Kbps
Video Port Analog Video 4-channelBNC port
Input
Network Video Max 2-channel IPC connections (8M)
Input
Video Output 1-channel VGA output
1-channel HDMI output (of the same video source)
HDMI/ VGA video output at the same time.
Loop Output N/A
Matrix Output N/A
Audio Port Audio Input 1-channel RCA port.
Audio Output 1-channel RCA port.
Bidirectional Reuse the audio input/output port.
Talk Input
Record Record Mode Schedule record/manual record/MD record/Alarm record
Record Max 4-channel playback
Playback
Backup Mode HDD, burner, USB device, network backup
Alarm Alarm Input N/A
Alarm Output N/A
HDD HDD Port 1 SATA portdoes not support eSATA port
One HDD 4T
Space
Coomunication Network 1 RJ45 port, 100Mbps Ethernet port
Port Communication N/A
USB 2 USB ports
Others Power DC12V
Power 15WWith power adapeter, no HDD
Consuption
Working -1055
Temperature
4
Parameters CP-UVR-0401K1
Working 10%~90%
Humidity
Dimensions SMART 1U case270mmW205mmD41mmH
Weight 1.25KGNo HDD
Installation Desk
Mode
5. Front Panel
The front panel is shown as in Figure 1.
Figure 1
Please refer to the following sheet for front panel button information.
Name Icon Function
Power button, press this button for three seconds to boot up
Power button or shut down DVR.
5
Backspace function: in numeral control or text control, press
it for 1.5seconds to delete the previous character before the
cursor.
In motion detection setup, working with Fn and direction
keys to realize setup.
Network
abnormal Network error occurs or there is no network connection, the
Net
indication light becomes red to alert you.
light
HDD
abnormal HDD error occurs or HDD capacity is below specified
HDD
indication threshold value, the light becomes red to alert you.
light
It is to receive the signal from the remote control.
IR Receiver IR
6
6. Rear Panel
Here we take the 4-channel series product rear panel as an example. See Figure 2.
Figure 2
Please refer to the following sheet for detailed information.
SN Icon Name Note
1
Power on-off button Power on/off button.
5
Power input port Input 12V DC.
7
7. Connection Diagram
Please refer the below diagram for CP-UVR-0401K1
8
8. Local Login
After system booted up, default video display is in multiple-window mode.
Click Enter or left click mouse, you can see the login interface. See Figure 3.
System consists of four accounts:
Username: admin. Password: admin. (administrator, local and network)
Username: 888888. Password: 888888. (administrator, local only)
Username: 666666. Password: 666666(Lower authority user who can only monitor, playback,
backup and etc.)
Username: default. Password: default(hidden user)
Note:
For security reason, please modify password after you first login.
Within 30 minutes, three times login failure will result in system alarm and five times login failure
will result in account lock!
Figure 3
9
9. Web
Open IE and input DVR address in the address column. For example, if your DVR IP is
192.168.1.240, then please input http:// 192.168.1.240 in IE address column.
System pops up warning information to ask you whether install webrec.cab control or not. Please
click yes button.
If you cant download the ActiveX file, please modify your IE security setup.
After installation, the interface is shown as below. See Figure 4.
Please input your user name and password.
Default factory name is admin and password is admin.
Note: For security reasons, please modify your password after you first login.
Figure 4
For detailed operation information, please refer to the Users Manual included in the resources
CD.
10
Appendix Toxic or Hazardous Materials or Elements
Toxic or Hazardous Materials or Elements
Component
Name
Pb Hg Cd Cr VI PBB PBDE
Sheet
Metal(Case)
Plastic Parts
Panel
Circuit Board
Fastener
Wire and
Cable/AC
Adapter
Packing
Material
Accessories
Note
O: Indicates that the concentration of the hazardous substance in all homogeneous materials in
the parts is below the relevant threshold of the SJ/T11363-2006 standard.
X: Indicates that the concentration of the hazardous substance of at least one of all
homogeneous materials in the parts is above the relevant threshold of the SJ/T11363-2006
standard. During the environmental-friendly use period (EFUP) period, the toxic or hazardous
substance or elements contained in products will not leak or mutate so that the use of these
(substances or elements) will not result in any severe environmental pollution, any bodily injury or
damage to any assets. The consumer is not authorized to process such kind of substances or
elements, please return to the corresponding local authorities to process according to your local
government statutes.
Note
For detailed operation introduction, please refer to our resource CD included in your
package for electronic version of the Users Manual.
This quick start guide is for reference only. Slight difference may be found in the user
interface.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks mentioned are the properties of their
respective owners.
If there is any uncertainty or controversy, please refer to the final explanation of us.
Please visit our website or contact your local service engineer for more information.
11
Website: - www.cpplusworld.com
Email id: - sales@cpplusworld.com; support@cpplusworld.com
12