Sdg1000x Datasheet Ds0201x E01a
Sdg1000x Datasheet Ds0201x E01a
Sdg1000x Datasheet Ds0201x E01a
Series
Function/Arbitrary
Waveform Generator
DataSheet-2016.05
SDG1000X Series Function/Arbitrary Waveform Generator
Key Features
Dual-channel, with bandwidth up to 60 MHz, and amplitude up
to 20 Vpp
SDG1062X 150 MSa/s sampling rate, 14-bit vertical resolution, and 16 kpts
waveform length
SDG1032X Innovative EasyPulse technology, capable of generating lower-
jitter Pulse waveforms, brings a wide range and extremely high
precision in pulse width and rise/fall times adjustment
WWW.SIGLENT.COM
SDG1000X Series Function/Arbitrary Waveform Generator
Characteristics
WWW.SIGLENT.COM
SDG1000X Series Function/Arbitrary Waveform Generator
When a Pulse waveform is generated by a common DDS generator, there will be a one-clock-jitter if the sampling rate is not an integer-related multiple of the output
frequency. SDG1000X EasyPulse technology successfully overcomes this weakness in DDS designs and helps to produce low jitter Pulse waveforms.
The rise/fall times can be set independently to the minimum of 16.8 ns at any frequency and to the maximum of 22.4 s. The adjustment step is as small as 100 ps.
The Pulse width can be fine-tuned to the minimum of 32.6 ns with the adjustment step as small as 100ps.
Benefitting from a special square-wave generating circuitry, the Square from the SDG1000X breaks the 60 MHz bandwidth barrier, reaching rise/fall times of less than
4.2 ns, and frequencies up to 60 MHz.
WWW.SIGLENT.COM
SDG1000X Series Function/Arbitrary Waveform Generator
Characteristics
Modulation Burst
Multiple modulation types: AM, DSB-AM, FM, PM, FSK, ASK, PSK and Two Burst modes, N cycle and Gated. The Burst source can be
PWM. The modulation source can be configured as Internal or External. configured as Internal, External or Manual.
Two Sweep modes, Linear and Log. Two Sweep directions, Up and High precision Frequency Counter with an input frequency range of
Down and three Sweep sources, Internal, External and Manual. 0.1 Hz~200 MHz.
Up to 10 harmonics may be generated. Amplitude and phase of each Capable of combining the waveforms of 2 channels from internal,
harmonic can be set independently providing more flexible tools to generate complex waveforms.
WWW.SIGLENT.COM
SDG1000X Series Function/Arbitrary Waveform Generator
EasyWave is a powerful arbitrary waveform editing software program that supports several ways to generate arbitrary waveform such as manual drawing, line-
drawing, equation-drawing, coordinate-drawing, etc. It is quite convenient for users to edit their own arbitrary waveforms through EasyWave.
WWW.SIGLENT.COM
SDG1000X Series Function/Arbitrary Waveform Generator
Specifications
All specifications apply to both channels. Unless otherwise stated, all specifications are not guaranteed unless the following conditions are met:
The generator is within calibration period of validity
The generator has been working continuously for at least 30 minutes at a specified temperature (18 ~ 28 ).
Frequency Characteristics
Parameter Min. Typ. Max. Unit Condition
Resolution 1 Hz
Initial accuracy -25 +1 ppm 1st year, 0~40
Sine Characteristics
Parameter Min. Typ. Max. Unit Condition
Frequency 1 60 M Hz SDG1062X
30 M SDG1032X
-60 dBc 0 dBm, 0~10 MHz ( included )
Harmonic distortion -50 dBc 0 dBm, 10~30 MHz ( included )
-40 dBc 0 dBm, 30~60 MHz
Total Harmonic Distortion 0.075 0 dBm, 10 Hz ~ 20 kHz
-65 dBc 0 dBm, 0~10 MHz ( included )
Non-harmonic spurious
-55 dBc 0 dBm, 10~30 MHz ( included )
-40 dBc 0 dBm, 30~60 MHz
Square Characteristics
Parameter Min. Typ. Max. Unit Condition
Frequency 1 60 M Hz SDG1062X
30 M SDG1032X
Rise/fall times 4.2 ns 10% ~ 90%, 1 Vpp, 50 load
3.8 ns 10% ~ 90%, 2.5 Vpp, 50 load
Overshoot 3 % 100 kHz, 1 Vpp, 50 load
Duty cycle 0.001 99.999 % Limited by frequency setting
300 ps +
Jitter (rms), Cycle to cycle 0.05 ppm of 1 Vpp, 50 load
period
Pulse Characteristics
Parameter Min. Typ. Max. Unit Condition
Frequency 1 12.5 M Hz
Pulse width 32.6 ns
Pulse width accuracy (0.01%+1 ns)
10% ~ 90%, 1 Vpp, 50 load , Subject to pulse
Rise/fall times 16.8 n 22.4 s
width limits
Overshoot 3 % 100 kHz, 1 Vpp
Duty cycle 0.001 99.999 % Limited by frequency setting
Duty cycle resolution 0.001 %
300 ps +
Jitter (rms) cycle to cycle 0.05 ppm of ps 1 Vpp, 50 load
period
WWW.SIGLENT.COM
SDG1000X Series Function/Arbitrary Waveform Generator
Noise Characteristics
Parameter Min. Typ. Max. Unit Condition
-3 dB bandwidth 60 MHz
Ramp Characteristics
Parameter Min. Typ. Max. Unit Condition
Frequency 1 500 k Hz
Symmetry 0 100 %
Percentage of peak-peak output, 1 kHz, 1 Vpp,
Linearity 1 %
100%
DC Characteristics
Parameter Min. Typ. Max. Unit Condition
-10 10 V HiZ load
Range
-5 5 V 50 load
Accuracy (1%+3 mV) HiZ load
Output Characterisics
Parameter Min. Typ. Max. Unit Condition
Range 4m 20 Vpp 10 MHz, HiZ load
(Note 1)
4m 10 Vpp >10 MHz, HiZ load
Accuracy (1%+1 mVpp) 10 kHz sine, 0 V offset
Amplitude flatness -0.3 +0.3 dB 50 load , 2.5 Vpp, compare to 10 kHz sine,
WWW.SIGLENT.COM
SDG1000X Series Function/Arbitrary Waveform Generator
Modulation Characteristics
AM
Parameter Min. Typ. Max. Unit Condition
Carrier Sine, Square, Ramp, Arb
Modulation Source Internal/External
Modulating wave Sine, Square, Ramp, Noise, Arb
Modulation depth 0 120 %
Modulation frequency 1m 20 k Hz While modulation source is Internal
FM
Parameter Min. Typ. Max. Unit Condition
Carrier Sine, Square, Ramp, Arb
Modulation Source Internal/External
Modulating wave Sine, Square, Ramp, Noise, Arb
BW is the max. output frequency limited by
Frequency deviation 0 0.5*BW
frequency setting
Modulation frequency 1m 20 k Hz While modulation source is Internal
Modulation Characteristics
PM
Parameter Min. Typ. Max. Unit Condition
Carrier Sine, Square, Ramp, Arb
Modulation Source Internal/External
Modulating wave Sine, Square, Ramp, Noise, Arb
Phase deviation 0 360
Modulation frequency 1m 20 k Hz While modulation source is Internal
ASK
Parameter Min. Typ. Max. Unit Condition
Carrier Sine, Square, Ramp, Arb
Modulation Source Internal/External
Modulating wave Square with 50% duty cycle
Limited by frequency setting while modulation
Keying frequency 1m 50 k Hz
source is Internal
FSK
Parameter Min. Typ. Max. Unit Condition
Carrier Sine, Square, Ramp, Arb
Modulation Source Internal/External
Modulating wave Square with 50% duty cycle
Modulation frequency 1m 50 k Hz While modulation source is Internal
PWM
Parameter Min. Typ. Max. Unit Condition
Carrier Pulse
Modulation Source Internal/External
Modulating wave Sine, Square, Ramp, Noise, Arb
Modulation frequency 1m 1M Hz While modulation source is Internal
Pulse width deviation resolution 6.67 ns
Burst Characteristics
Parameter Min. Typ. Max. Unit Condition
Carrier Sine, Square, Ramp, Pulse, Noise, Arb
Type Count(1-1000000cycles), Infinite, Gated
Carrier frequency 2m BW Hz BW is the max. output frequency
Start/Stop phase 0 360
Internal period 1 1000 s
Trigger source Internal, External, Manual
Gated source Internal/External
Trigger delay 100 s
WWW.SIGLENT.COM
SDG1000X Series Function/Arbitrary Waveform Generator
Sweep Characteristics
Parameter Min. Typ. Max. Unit Condition
Carrier Sine, Square, Ramp, Arb
Type Linear, Log
Direction Up, Down
Carrier frequency 1 BW Hz BW is the max. output frequency
Sweep time 1m 500 s
Trigger source Internal, External, Manual
WWW.SIGLENT.COM
SDG1000X Series Function/Arbitrary Waveform Generator
General Characteristics
Power
Parameter Min. Typ. Max. Unit Condition
Voltage 100 - 240 Vrms ( 10%), 50 / 60 Hz
100 - 120 Vrms ( 10%), 400 Hz
Power consumption 21 50 W Dual channels, Sine, 1kHz, 10Vpp, 50 load
Display
Parameter Min. Typ. Max. Unit Condition
Color depth 24 bit
Contrast ratio 350:1
Luminance 300 cd/m2
Environment
Parameter Min. Typ. Max. Unit Condition
Operating temperature 0 40
Storage temperature -20 60
Operating humidity 5 90 % 30
5 50 % 40
Non-operating humidity 5 95 %
Operating altitude 3048 m 30
Non-operating altitude 15000 m
Calibration
Parameter Min. Typ. Max. Unit Condition
Calibration interval 1 year
Mechanical
Parameter Min. Typ. Max. Unit Condition
Dimensions WHD = 260.3 mm107.2 mm295.7 mm
Net weight 3.43 kg
Gross weight 4.35 kg
Compliance
LVD IEC 61010-1:2010
EMC EN61326-1:2013
Ordering Information
Product Description
60 MHz, 2 CH, 150 MSa/s, 14 bit SDG1062X
30 MHz, 2 CH, 150 MSa/s, 14 bit SDG1032X
Standard configurations
Quick Start -1
Product Certification -1
Power Cord-1
Calibration Certificate -1
USB Cable -1
CD (Includes Quick Start guide, data sheet, and Application Software Package-1
Optional configurations
BNC Coaxial Cable SDG-BNC
20 dB Attenuator ATT-20dB
USB-GPIB Adapter USB-GPIB
WWW.SIGLENT.COM
SDG1000X
Series
Function/Arbitrary
Waveform Generator
About SIGLENT
Headquarter:
SIGLENT TECHNOLOGIES CO., LTD.
Add: Bldg No.4 & No.5, Antongda Industrial
Zone, 3rd Liuxian Road, Bao'an District,
Shenzhen, 518101, China.
Tel: + 86 755 3661 5186
Fax: + 86 755 3359 1582
Email: sales@siglent.com;
Website: http://www.siglent.com/ens/
USA:
SIGLENT Technologies America, Inc
6557 Cochran Rd Solon, Ohio 44139
Tel: 440-398-5800
Toll Free: 877-515-5551
Fax: 440-399-1211 Follow us on
Email: info@siglent.com Facebook: SiglentTech
Website: www.siglentamerica.com
Europe:
SIGLENT TECHNOLOGIES EUROPE GmbH
ADD: Liebigstrasse 2-20, Gebaeude 14,
22113 Hamburg Germany
Tel: +49(0)-819-95946
Fax: +49(0)-819-95947
Email: info-eu@siglent.com
Website: www.siglenteu.com