Launch X-431 V 8 Inch Lenovo Tablet PC User Manual
Launch X-431 V 8 Inch Lenovo Tablet PC User Manual
Launch X-431 V 8 Inch Lenovo Tablet PC User Manual
000
Revised date: 2016-03-10
LAUNCH X-431 V User Manual Safety Precautions
Copyright Information
Copyright 2016 by LAUNCH TECH. CO., LTD. All rights reserved. No part of
this publication may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording or
otherwise, without the prior written permission of LAUNCH. The information
contained herein is designed only for the use of this unit. LAUNCH is not
responsible for any use of this information as applied to other units.
Neither LAUNCH nor its affiliates shall be liable to the purchaser of this unit or
third parties for damages, losses, costs, or expenses incurred by purchaser or
third parties as a result of: accident, misuse, or abuse of this unit, or
unauthorized modifications, repairs, or alterations to this unit, or failure to strictly
comply with LAUNCH operating and maintenance instructions. LAUNCH shall
not be liable for any damages or problems arising from the use of any options or
any consumable products other than those designated as Original LAUNCH
Products or LAUNCH Approved Products by LAUNCH.
Trademark Information
LAUNCH is a registered trademark of LAUNCH TECH CO., LTD. (also called
LAUNCH for short) in China and other countries. All other LAUNCH trademarks,
service marks, domain names, logos, and company names referred to in this
manual are either trademarks, registered trademarks, service marks, domain
names, logos, company names of or are otherwise the property of LAUNCH or
its affiliates. In countries where any of the LAUNCH trademarks, service marks,
domain names, logos and company names are not registered, LAUNCH claims
other rights associated with unregistered trademarks, service marks, domain
names, logos, and company names. Other products or company names referred
to in this manual may be trademarks of their respective owners. You may not
use any trademark, service mark, domain name, logo, or company name of
LAUNCH or any third party without permission from the owner of the applicable
trademark, service mark, domain name, logo, or company name. You may
contact LAUNCH by visiting the website at www.cnlaunch.com, or writing to
LAUNCH TECH. CO., LTD.Launch Industrial Park, North of Wuhe Avenue,
Banxuegang, Bantian, Longgang, Shenzhen, Guangdong, P.R.China, to request
written permission to use Materials on this manual for purposes or for all other
questions relating to this manual.
i
LAUNCH X-431 V User Manual Safety Precautions
ii
LAUNCH X-431 V User Manual Safety Precautions
iii
LAUNCH X-431 V User Manual Table of Contents
TABLE OF CONTENTS
1 INTRODUCTIONS ............................................................................................. 1
1.1 PRODUCT PROFILE ................................................................................... 1
1.2 FEATURES ................................................................................................ 1
1.3 KNOWLEDGE OF X-431 V.......................................................................... 2
1.3.1 X-431 V whole set .............................................................................. 2
1.3.2 X-431 V handset ................................................................................. 2
1.3.3 Diagnostic connector (Only applies for 12V cars) .............................. 3
1.4 TECHNICAL PARAMETERS ......................................................................... 4
1.5 PACKAGE LIST .......................................................................................... 4
2 PREPARATIONS............................................................................................... 5
2.1 CHARGING X-431 V ..................................................................................... 5
2.2 USING YOUR BATTERY.................................................................................. 5
2.3 POWER ON/OFF............................................................................................ 5
2.3.1 Power on............................................................................................. 5
2.3.2 Power off ............................................................................................. 5
2.4 TIPS ON FINGER OPERATIONS ....................................................................... 6
2.5 LOCK & UNLOCK THE SCREEN ...................................................................... 6
2.5.1 Lock the screen .................................................................................. 6
2.5.2 Unlock the screen ............................................................................... 6
2.6 SCREEN LAYOUT .......................................................................................... 7
2.7 NOTIFICATION PANEL ................................................................................... 7
2.8 CUSTOMIZE YOUR DESKTOP ......................................................................... 7
2.8.1 Create a widget on the desktop.......................................................... 7
2.8.2 Move items on the desktop ................................................................ 7
2.8.3 Delete items from the desktop ............................................................ 7
2.8.4 Adjust brightness ................................................................................ 7
2.8.5 Set standby time ................................................................................. 8
2.9 SET SCREEN LOCK ....................................................................................... 8
3 WI-FI SETTING ................................................................................................. 9
3.1 CONNECT TO A WI-FI NETWORK ................................................................... 9
3.2 DISCONNECT FROM A WI-FI NETWORK ......................................................... 9
4 HOW TO DIAGNOSE ......................................................................................10
4.1 DIAGNOSIS FLOWCHART ............................................................................10
4.2 USER REGISTRATION & CONNECTOR ACTIVATION ......................................10
4.2.1 User registration ...............................................................................10
4.2.2 Diagnostic software layout................................................................14
iv
LAUNCH X-431 V User Manual Table of Contents
v
LAUNCH X-431 V User Manual Table of Contents
vi
LAUNCH X-431 V User Manual Knowledge of X-431 V
1 Introductions
1.1 Product Profile
X-431 V is a new Android-based vehicle trouble diagnostic device developed for
internet applications. It inherits from LAUNCHs advanced diagnosing
technology and is characterized by covering a wide range of vehicles, featuring
powerful functions, and providing precise test result.
Through the Bluetooth communication between vehicle diagnostic connector
and variant mobile intelligent terminals, it achieves X-431 series full car model
and full system vehicle trouble diagnosis, which includes Reading DTCs,
Clearing DTCs, Reading Data Stream, Actuation Test and Special Functions.
1.2 Features
1. Diagnostic Tool:
A. Diagnose
Diagnose the electronic control system of prevailing vehicle models
covering Asian, European, American and Chinese. Diagnosis functions
include: Read DTCs, Clear DTCs, Read data stream, Special functions
etc;
Specially designed for Android platform with clear and user-friendly
interface;
Via Bluetooth, it is simple for diagnostic connector to communicate with
X-431 V;
Equipped with an exclusive X-431 V protective sleeve to prevent it from
being damaged.
B. One-click Update: lets you update your diagnostic software more
efficiently.
C. Repair Data: provides abundant automotive handbook, repair case and
wiring diagrams for reference and retrieval.
2. Browser: built-in Wi-Fi module makes surfing on the internet freely;
3. Email: allows you to send and receive email.
4. Search: enables you to locate your target quickly and conveniently;
5. Settings: to configure your personalized X-431 V through it;
6. Applications: other android based applications can be customized to install
or uninstall.
1
LAUNCH X-431 V User Manual Knowledge of X-431 V
1 Front Camera
2 Speaker
3 VOLUME +/- Key To adjust the volume.
4 Rear Camera
5 USB/Charging Port
6 Earphone Jack
7 Speaker
8 POWER/Screen Lock In Off mode, press it to turn X-431 V on;
Key In On mode, turn X-431 V off with long press
or lock screen with short press.
9 Microphone
2
LAUNCH X-431 V User Manual Knowledge of X-431 V
3
LAUNCH X-431 V User Manual Knowledge of X-431 V
Diagnostic Connector:
Working voltage: 9 ~18V
Average working current: About 35mA
Standby current: About 25mA
Working temperature: -20 to 55
Storage temperature: -30 to 70
Storage humidity: <80%
Working humidity: <60%
4
LAUNCH X-431 V User Manual General Operations
2 Preparations
2.1 Charging X-431 V
There are two charging methods available:
Via Power adaptor:
1. Insert one end of the included USB cable into the power adaptor.
2. Connect the other end into the charging port of X-431 V.
3. Plug the adaptor into AC outlet.
Via PC:
1. Insert one end of the included USB cable into the USB port of PC.
2. Connect the other end into the charging port of X-431 V.
If appears on the screen, it indicates it is being charged. If the logo changes
into , it indicates that the battery is fully charged. Unplug the USB cable on the
charger from X-431 V.
5
LAUNCH X-431 V User Manual General Operations
Long press: Tap and hold on the current interface or area until a
contextual menu pops up on the screen, and then release it.
6
LAUNCH X-431 V User Manual General Operations
7
LAUNCH X-431 V User Manual General Operations
8
LAUNCH X-431 V User Manual Wi-Fi Setup
3 Wi-Fi Setting
Note: If you dont need to use Wi-Fi for a while, you can turn it off to conserve
battery life.
X-431 V has built-in Wi-Fi that can be used to get online. Once youre online,
you can register your X-431 V, browse the Internet, get apps, send email and
check for software updates.
9
LAUNCH X-431 V User Manual Vehicle Diagnosis
4 How to diagnose
4.1 Diagnosis Flowchart
For new users, please follow the operation chart shown in Fig. 4-1 to get familiar
with and start using X-431 V.
Fig. 4-1
4.2 User Registration & Connector Activation
During initial use, tap the X-431 V icon on the home screen and you will see
some illustrations that guide you through some of important operations of the
application. Scroll your screen to left to read it until the Start Now page appears.
Tap Start Now to enter the main menu screen.
4.2.1 User registration
Tap Login on the upper right corner of the main menu screen:
10
LAUNCH X-431 V User Manual Vehicle Diagnosis
Fig. 4-2
1. If you are a new user, tap New Registration. See Fig. 4-3.
Fig. 4-3
Note: To obtain better service, you need to provide real information.
In Fig. 4-3, fill in the information in each field (Items with * must be filled). After
inputting, tap Register, a screen similar to the following will appear:
11
LAUNCH X-431 V User Manual Vehicle Diagnosis
Fig. 4-4
In Fig. 4-4, input the Serial Number and Activation Code, which can be found in
the password envelope.
Product SN Product SN
Activation code
Fig. 4-5
Note: To exit and activate it later, tap Skip. In this case, you can activate your
connector by tapping Activate Connector in Profile. For details, please refer to
Chapter 4.7.2 Activate Connector.
Tap Activate to finish your registration. See Fig. 4-6.
12
LAUNCH X-431 V User Manual Vehicle Diagnosis
Fig. 4-6
To download the diagnostic software, tap Yes. See Fig. 4-7.
Tap No to download and install it later.
Fig. 4-7
In Fig. 4-7, tap Update to start downloading. It may take several minutes to
finish it, please be patient to wait. To pause downloading, tap Pause. To
resume it, tap Continue.
Once download is complete, the system will install the software package
automatically.
2. If you have registered to be a member, input your name and password, and
then tap the Login button to enter the main menu screen directly.
13
LAUNCH X-431 V User Manual Vehicle Diagnosis
Fig. 4-8
Name Description
14
LAUNCH X-431 V User Manual Vehicle Diagnosis
4.3 Connections
4.3.1 Preparation
Normal testing conditions
y Turn on the vehicle power supply.
y Vehicle battery voltage range should be 9-14 Volts.
y Throttle should be in a closed position.
Select the diagnostic connector
If X-431 V is testing vehicles equipped with universal OBD II 16 PIN diagnostic
socket, please use the included diagnostic connector. (For vehicles with
non-OBD II 16 PIN diagnostic socket, a non-16 PIN connector is required.)
4.3.2 DLC location
The DLC (Data Link Connector or Diagnostic Link Connector) is typically a
standard 16-pin connector where diagnostic tools interface with a vehicles
on-board control modules. The DLC is usually located 12 inches from the center
of the instrument panel, under or around the drivers side for most vehicles. If
Data Link Connector is not located under dashboard, a label should be there
telling location. For some Asian and European vehicles, the DLC is located
behind the ashtray and the ashtray must be removed to access the connector. If
the DLC cannot be found, refer to the vehicles service manual for the location.
Fig. 4-9
4.3.3 Vehicle connection
The method used to connect the diagnostic connector to a vehicles DLC
depends on the vehicles configuration as follows:
y A vehicle equipped with an OBD II management system supplies both
communication and 12V power through a standardized DLC.
y A vehicle not equipped with an OBD II management system supplies
15
LAUNCH X-431 V User Manual Vehicle Diagnosis
Fig. 4-10
3. Choose one of the two ways to obtain power from:
A. Power adaptor: Connect one end of the included power adaptor to DC IN
port of X-431 V tablet, and the other end to AC outlet.
B. Internal battery pack
For non-OBDII vehicle, proceed as follows:
1. Locate vehicles DLC socket.
2. Select the corresponding non-16pin connector.
3. Plug the non-16pin end of the connector into the DLC socket, then connect
the other end to the OBD I adaptor, and then tighten the captive screws.
4. Connect the other end of the adaptor to the included diagnostic connector.
5. To supply power to OBD I adaptor from:
A. Cigarette Lighter: Connect one end of the cigarette lighter cable to
vehicles cigarette lighter receptacle, and the other end to the power jack of
OBD I adaptor.
16
LAUNCH X-431 V User Manual Vehicle Diagnosis
Fig. 4-11
B. Battery Clamps Cable: Connect one end of the battery clamps cable to
vehicles battery, and the other end to the power jack of OBD I adaptor.
Fig. 4-12
17
LAUNCH X-431 V User Manual Vehicle Diagnosis
Fig. 4-13
2). Tap DEMO to ignore Bluetooth connection and jump to the DEMO system
selection screen. (Note: No Bluetooth connection is required for DEMO
program.)
Fig. 4-14
3). Tap Engine, the system will jump to the function menu. See Fig. 4-15.
Fig. 4-15
4.5.1 Read DTC
This function displays the detailed information of DTC records retrieved from the
18
LAUNCH X-431 V User Manual Vehicle Diagnosis
Fig. 4-16
On-screen Buttons:
New Session: Tap it to return to the home screen.
Search: Highlight a certain DTC item, and then tap it to search the definition
of the selected DTC online.
Report: To save the current diagnostic data. All reports are saved under the
tab Diagnostic Report in My Report from Profile menu. For details on report
operations, please refer to Chapter 4.7.4 My Report.
Freeze Frame: When an emission-related fault occurs, certain vehicle conditions
are recorded by the on-board computer. This information is referred to as freeze
frame data. Freeze frame data includes a snapshot of critical parameter
values at the time the DTC is set.
Help: Tap it to view the help information.
19
LAUNCH X-431 V User Manual Vehicle Diagnosis
Fig. 4-17
On-screen Buttons:
Select Page: Tap it to select all items of the current page.
Unselect: Tap it to deselect all data stream items.
New Session: Tap it to return to the home screen.
Print: Tap it to print the current screen. To perform printing, you need to
purchase a Wi-Fi printer manufactured by LAUNCH separately. For details on
printer setting, see Chapter 4.8.5 Launch wireless printer connection.
Confirm: Tap it to confirm and jump to the next step.
After selecting the desired items, tap Confirm to enter the data stream reading
page.
20
LAUNCH X-431 V User Manual Vehicle Diagnosis
Fig. 4-18
On-screen Buttons:
New Session: Tap to return to the home screen.
Graph: After selecting, tap it to view the waveform. There are 3 types of
display modes available for data viewing, allowing you to view various types
of parameters in the most suitable way.
9 Graph displays the parameters in waveform graphs.
9 Value this is the default mode which displays the parameters in texts
and shows in list format.
9 Combine this option is mostly used in graph merge status for data
comparison. In this case, different items are marked in different colors.
Record: Tap to start recording diagnostic data for future playback and
analysis. The saved file follows the naming rule: It begins with vehicle type,
and ends with the record starting time (To differentiate between files, please
configure the accurate system time). The file is stored in My Report under
Profile menu. For details on playback operations, please refer to Chapter
4.7.4 My Report.
To stop reading the data stream, tap before the recording progress bar.
Print: Tap it to print the current screen. To perform printing, you need to
purchase a Wi-Fi printer manufactured by LAUNCH separately. For details on
printer setting, see Chapter 4.8.5 Launch wireless printer connection.
Help: Tap to view the help information.
If more than one page of data stream items is displayed, an icon similar to 1/X
appears. Swipe the screen from right to left to switch to the next page.
Tap to return to the function selection screen.
21
LAUNCH X-431 V User Manual Vehicle Diagnosis
22
LAUNCH X-431 V User Manual Vehicle Diagnosis
23
LAUNCH X-431 V User Manual Vehicle Diagnosis
ABS Bleeding
This function allows you to perform various bi-directional tests to check the
operating conditions of Anti-lock Braking System (ABS).
1. When the ABS contains air, the ABS bleeding function must be performed to
bleed the brake system to restore ABS brake sensitivity.
2. If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake
line, or brake fluid is replaced, the ABS bleeding function must be performed
to bleed the ABS.
Tire Pressure Monitor System Reset
1. After the tire pressure MIL turns on and maintenance is performed, the tire
pressure resetting function must be performed to reset tire pressure and turn
off the tire pressure MIL.
2. Tire pressure resetting must be performed after maintenance is performed in
the following cases: tire pressure is too low, tire leaks, tire pressure
monitoring device is replaced or installed, tire is replaced, tire pressure sensor
is damaged, and tire is replaced for the car with tire pressure monitoring
function.
Diesel Particulate Filter (DPF) Regeneration
DPF regeneration is used to clear PM (Particulate Matter) from the DPF filter
through continuous combustion oxidation mode (such as high temperature
heating combustion, fuel additive or catalyst reduce PM ignition combustion) to
stabilize the filter performance.
DPF regeneration may be performed in the following cases:
a) The exhaust back pressure sensor is replaced.
b) The PM trap is removed or replaced.
c) The fuel additive nozzle is removed or replaced.
d) The catalytic oxidizer is removed or replaced.
e) The DPF regeneration MIL is on and maintenance is performed.
f) The DPF regeneration control module is replaced.
4.7 Profile
This function allows users to manage your personal information.
24
LAUNCH X-431 V User Manual Vehicle Diagnosis
4.7.1 My Connector
This option is used to manage all your activated connectors.
If several diagnostic connectors are activated on this tool, a list of connectors will
be displayed on the screen. Once you choose the connector that belongs to
other account, you have to log out, and then input the right account to continue.
4.7.2 Activate Connector
It is used to activate your diagnostic connector.
Input the Serial Number and Activation Code, and then tap Activate to activate
the connector.
For details on how to obtain Serial Number and Activation Code, tap the link
below to get help.
4.7.3 Firmware fix
Use this item to upgrade and fix diagnostic firmware. During fixing, please do not
cut power or switch to other interfaces.
4.7.4 My Report
This option is used to view the diagnostic report generated in process of vehicle
diagnosis. Additionally, delete and share operations are also supported.
Tap My Report, there are total 2 options available.
If user records the running parameters while reading data stream, it will be
saved as .x431 file and appear under Diagnostic Record tab.
In case the DTC result is saved on Read Trouble Code page, .txt files will be
listed under Diagnostic Report tab.
4.7.5 Profile
Use this item to view and configure personal information.
4.7.7 Help
Function Notes, FAQ, Quick Start Guide and User Manual are included.
25
LAUNCH X-431 V User Manual Vehicle Diagnosis
4.8 Settings
It enables you to make some application settings and view software version
information etc.
4.8.1 Units of Measurement
It is designed to set the measurement unit. Metric System and English System
are available.
4.8.2 Orientation
This option is used to set the display orientation of the application.
Fig. 4-19
A. If it is the first time you have operated this printer, please proceed the
26
LAUNCH X-431 V User Manual Vehicle Diagnosis
following:
2. For initial use, you are suggested to reset the printer: Press and hold [MODE]
& [FEED] for 8 seconds, the following resetting command will be printed out:
at + default = 1
ok
at + reboot = 1
rebooting...
3. Tap Reset to configure Wi-Fi printer.
Step 1: Connect the printer:
Tap Scan to select the desired printer hotspot named with
X-431PRINTER-XXXX (XXXX stands for 4 characters), and then tap
Connect to enter Step 2.
Fig. 4-20
Step 2: Join the Wi-Fi printer into LAN:
Tap Scan to select the desired local Wi-Fi network from the list, and type in
the security password (If it is an open network, password is not required), and
then tap Confirm.
27
LAUNCH X-431 V User Manual Vehicle Diagnosis
Fig. 4-21
4. Once the Wi-Fi network of the printer is connected and the printer is found,
tap Printing test to test the printing.
Now you can use the Wi-Fi printer to print!
If the printer is not found, please reset the printer to default factory settings (refer
to Step 2 for details) and check whether the current device and the printer are on
the same LAN.
B. If you have configured the Wi-Fi printer to the LAN:
2. Tap Connect to Printer:
a). If the local network remains as it is, tap Test Print directly to test the
printing.
b). If the local network changes, you have to reset the Wi-Fi printer.
4.8.6 Diagnostic Feedback
This item allows you to feedback your diagnostic problems to us for analysis and
troubleshooting.
4.8.8 About
The software version information and disclaimer are included.
28
LAUNCH X-431 V User Manual Others
5 Others
5.1 Email
The function allows you to send and receive email.
5.1.1 Configure an email account
Note: Before sending or receiving email, you have to set up an email account. In
addition, this function required a stable network connection.
1. On the home screen, tap Email.
2. Choose the desired email account type.
3. Input email address and password, tap Next.
Note: If Manual setup is selected, please consult your email service provider for
detailed parameter setting.
4. Follow the on-screen instructions to proceed until the system prompts you
that the account setup has been finished.
5.1.2 Add an email account
1. Tap Settings --> Accounts.
2. Tap Add account.
3. Choose the desired account type.
5.2 Browser
5.2.1 Open browser
On the home screen, tap Browser to launch the browser. You can choose the
desired homepage or input the website address to browse.
Fig. 5-1
29
LAUNCH X-431 V User Manual Others
5.3 Synchronization
You can transfer media files and APK between the PC and X-431 V.
5.3.1 Connect to PC
1. Use the USB cable to connect the X-431 V to your PC.
2. Swipe from the top, a message Connected as a media device appears.
5.3.2 Run on PC
Perform the following steps:
y Locate the new disc.
y Copy the files.
5.3.3 Install an application
Do the following steps:
1. Tap Settings > Security, and set the Unknown sources to ON, which
allows you to install apps from unknown sources.
2. A dialog box appears on the screen, tap OK to confirm.
3. Set the tool as Connected as a media device, and copy the APK file from
the PC to the tool.
30
LAUNCH X-431 V User Manual Others
31
LAUNCH X-431 V User Manual FAQ
7 FAQ
1. How to save power?
Please turn off the screen while X-431 V keeps idle.
Set a shorter standby time.
Decrease the brightness of the screen.
If WLAN connection is not required, please turn it off.
Disable GPS function if GPS service is not in use.
2. What should I do in case I forgot the screen lock?
You can set screen lock as pattern or password. If you forgot the password,
please consult your device provider or reset your device.
Warning: Resetting may cause data loss. Before use, please make sure important
data has been backed up.
3. How to do if the system runs slow?
In this case, please do the followings:
> Check all running applications and stop the unnecessary applications (Steps:
Settings --> Apps --> Running --> Tap the desired application and then tap
Stop).
> Check all installed applications, remove the unnecessary applications (Steps:
Settings --> Apps --> Downloaded --> Tap the desired application and then tap
Uninstall).
If all steps mentioned above are finished and the system still works slowly.
Please try to close the system and reboot your X-431 V.
4. How to handle when you encounter Insufficient storage space?
If this happens while downloading the diagnostic software, please proceed as
follows:
1. Get your X-431 V username and password ready. If you forgot the password,
please dial our hotline to retrieve it with the product serial number
98549*******.
2. Reset the X-431 V to the default factory settings (For details, please refer to
Item 5 in this Chapter).
3. Tap Settings --> WLAN, choose the desired WLAN network to connect.
4. Open the browser and visit www.dbscar.com to download and install the
latest App.
5. After the installation is complete, launch the application and login with your
32
LAUNCH X-431 V User Manual FAQ
33
LAUNCH X-431 V User Manual Warranty
Warranty
THIS WARRANTY IS EXPRESSLY LIMITED TO PERSONS WHO PURCHASE
LAUNCH PRODUCTS FOR PURPOSES OF RESALE OR USE IN THE
ORDINARY COURSE OF THE BUYERS BUSINESS.
LAUNCH electronic product is warranted against defects in materials and
workmanship for one year from date of delivery to the user.
This warranty does not cover any part that has been abused, altered, used for a
purpose other than for which it was intended, or used in a manner inconsistent
with instructions regarding use. The exclusive remedy for any automotive meter
found to be defective is repair or replacement, and LAUNCH shall not be liable
for any consequential or incidental damages.
Final determination of defects shall be made by LAUNCH in accordance with
procedures established by LAUNCH. No agent, employee, or representative of
LAUNCH has any authority to bind LAUNCH to any affirmation, representation,
or warranty concerning LAUNCH automotive meters, except as stated herein.
Disclaimer
The above warranty is in lieu of any other warranty, expressed or implied,
including any warranty of merchantability or fitness for a particular purpose.
Purchase Order
Replaceable and optional parts can be ordered directly from your LAUNCH
authorized tool supplier. Your order should include the following information:
Order quantity
Part number
Part name
Customer Service
Any question during the operation, please call 86-755-84528722.
If your unit requires repair service, return it to the manufacturer with a copy of
the sales receipt and a note describing the problem. If the unit is determined to
be in warranty, it will be repaired or replaced at no charge. If the unit is
determined to be out of warranty, it will be repaired for a nominal service charge
plus return freight. Send the unit pre-paid to:
Attn: Customer Service Department
LAUNCH TECH. CO., LTD.
Launch Industrial Park,
North of Wuhe Avenue,
Banxuegang, Bantian,
34
LAUNCH X-431 V User Manual Warranty
Statement:
LAUNCH reserves the rights to make any change to product designs and
specifications without notice. The actual object may differ a little from the
descriptions in the manual in physical appearance, color and configuration. We
have tried our best to make the descriptions and illustrations in the manual as
accurate as possible, and defects are inevitable, if you have any question,
please contact local dealer or after-sale service center of LAUNCH, LAUNCH
does not bear any responsibility arising from misunderstandings.
35