Projector Spec 6969
Projector Spec 6969
Projector Spec 6969
PT-CW230
PT-CX200
TM
New ultra-short throw projectors can project images onto a large 80-inch screen
with a short projection distance of 0.32 m. These projectors can be installed either
horizontally or vertically to meet various installation requirements.
The 3D projections make classes, seminars, events and exhibitions more
impressive and effective, providing a wider range of uses.
3D Projection
Ensuring powerful images
Ultra-short throw projectors can be wall-mounted with a wall mount bracket (ET-PKC100W).
There is no need to worry about glare of the projection light and the presenters shadow on the screen.
The projectors can be installed either horizontally or vertically on a table, wall, ceiling or floor, to enable
new uses and meet new installation requirements.
0.32 m(1.05)
PT-CW230
Table mounted
Ceiling mounted
wide
80
screen
Wall mounted
Floor mounted
(for oor projection)
* The above is an image only for explanation.The screens and photos illustrating
the functions look different from the real things.
DLP Link
You can build the 3D system by using the configuration shown below. Enjoy vivid
3D worlds such as powerful high-definition games, digital photos, 3D Blu-ray
Discs, streaming movies and videos.
As synchronized signals are contained in 3D images that you view, you can build
the 3D system without connecting the emitter.
Configuration: 3D Contents + 3D Reproduction apparatus + 3D Glasses (DLP Link system)
IR system
Microsoft
Windows Vista-/
Windows 7based computer
Compatible
NVIDIA
graphic card
NVIDIA
3D Vision kit
PT-CW230/CX200
3D SYNC OUT terminal (of PT-CW230/CX200) and the IR emitter are connected
to build the 3D system.
Configuration: 3D Contents + 3D Reproduction apparatus + 3D Glasses (IR system) + IR Emitter
[Viewing 3D images]
View 3D images at a distance at least three times further than the height of the screen. Each person views and feels the 3D images differently. In some cases, the effects may cause viewers to feel sick.
If you see double 3D images or do not see stereoscopic images, you may feel fatigue or discomfort If you feel sick, immediately stop viewing 3D images. Children under the age of six should not view 3D images.
Eco-friendly
No halogenated flame retardants are used in the cabinet.
Lead-free glass is used for the lens.
Low standby power of 0.45 W*9
Switchable lamp mode
Specifications
Projection distance
Model
PT-CW230
PT-CX200
Power supply
Power consumption
Display method
DLP system
Lens
Lamp
Color reproducibility
2500 lm
2000 lm
Center-to-corner uniformity*
80%
Contrast*
HDMI
(Horizontal) 1593 kHz; (Vertical) 50120 Hz; (Dot clock) 150 MHz or lower
RGB (analog)
(Horizontal) 1593 kHz; (Vertical) 50120 Hz; (Dot clock) 150 MHz or lower
(Signals exceeding the dot clock rate of 150MHz are downsampled.)
fH: 15.75 kHz, fV: 60 Hz [480i(525i)]
fH: 31.50 kHz, fV: 60 Hz [480p(525p)]
fH: 45.00 kHz, fV: 60 Hz [720(750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i]
YPBPR (YCBCR)
Video/S-Video
B
A
screen (A)
1.52 [60"]
1.78 [70"]
2.03 [80"]
2.29 [90"]
2.54 [100"]
2.79 [110"]
Vertical: 5
Installation
Built-in speaker
HDMI IN
COMPUTER IN 1
COMPUTER IN 2 /
MONITOR OUT
VIDEO IN
AUDIO OUT
M3 x 1 (L-R x 1)
SERIAL IN
1.40
1.52
1.78
2.03
2.29
(RJ-45) 1 (for network connection, 100BASE-TX/10BASE-T, compliant with PJLink (class 1))
3D SYNC OUT
Cord length
3.0 m (9'10")
Cabinet materials
-0.07 (-0.23')
-0.02 (-0.07')
0.02 (0.07')
0.07 (0.23')
0.11 (0.36')
0.16 (0.52')
screen (A)
LAN
(0.75')
(0.92')
(1.05')
(1.21')
(1.35')
(1.51')
Distance from
M3 x 2 (L-R x 1)
AUDIO IN
0.23
0.28
0.32
0.37
0.41
0.46
projector (E)
projector (F)
0.05
0.07
0.09
0.11
0.13
0.15
(0.16')
(0.23')
(0.30')
(0.36')
(0.43')
(0.49')
0.23
0.25
0.27
0.29
0.31
0.33
(0.75')
(0.82')
(0.89')
(0.95')
(1.02')
(1.08')
Height from
Height from
projector (E)
projector (F)
COMPUTER AUDIO IN
Height from
RCA pin 1
Terminals S-VIDEO IN
Height from
[55"]
[60"]
[70"]
[80"]
[90"]
0.25
0.28
0.33
0.38
0.44
(0.82')
(0.92')
(1.08')
(1.25')
(1.44')
-0.05 (-0.16')
-0.02 (-0.07')
0.04 (0.13')
0.09 (0.30')
0.14 (0.46')
0.07
0.09
0.11
0.14
0.17
(0.23')
(0.30')
(0.36')
(0.46')
(0.56')
0.25
0.27
0.29
0.32
0.35
(0.82')
(0.89')
(0.95')
(1.05')
(1.15')
Dimensions (W H D)
Dimensions
321 x 178 x 386 mm (12-5/8" 7" 15-3/16") (with legs at shortest position)
Weight
Noise level
unit: mm (inch)
Operating environment
178(7)
Scanning
frequency
Projected image
Brightness*
Resolution
DLP chip x 1
Pixels
350 W (0.45 W when STANDBY MODE set to ECO,*1 11.0 W when STANDBY MODE set to NETWORK.)
Panel size
DLP
chip
Supplied accessories
321(12-5/8)
Optional accessories
Ceiling mount
bracket
for high ceilings*5
Ceiling mount
bracket
for low ceilings*5
ET-PKV100H
ET-PKV100S
ET-PKC100W
ET-LAC100
ET-RFC100
Bracket assembly
ET-PKC100B
386(15-3/16)
Caution
Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.
NOTE ON USE
1 The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping
sound, or fail to illuminate, due to impact or extended use.
2 The high-wattage lamp becomes very hot during operation. Please observe the following precautions:
Never place objects on top of the projector while it is in operation.
Make sure there is an unobstructed space of 500 mm (19-11/16 in) or more around the projectors exhaust openings.
If stacking projector units, care must be taken to provide the recommended space between units. These space
requirements also apply to installation where only one projector unit is operating at one time and the other unit is used
as a backup.
If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the
operating temperature listed in the specifications table during use. Also, make sure the projectors intake and exhaust
openings are not blocked. Ensure there is sufficient ventilation to prevent hot air from the exhaust openings being
recirculated into the intake opening.
3 The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.
The brightness of the lamp will gradually decrease with use.
4 Due to natural characteristics of lamps, screen brightness may fluctuate. This is not an indication of faulty lamp performance.
http://panasonic.net/avc/projector
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability differs depending on region and country. This product may be subject to export control regulations.
The projection distances and throw ratios given in this brochure are for use only as guidelines. For more detailed information, please
consult the dealer from whom you are purchasing the product. The PJLink trademark is an application trademark in Japan, the
United States, and other countries and regions or registered trademarks.
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries. DLP (Digital Light Processing), DLP Chip, DLP Medallion Logo and DLPTM Link are trademarks
or registered trademarks of Texas Instruments. NVIDIA, NVIDIA Logo and 3D Vision are trademarks or registered trademarks
of NVIDIA Corporation in the United States and/or other countries. All other trademarks are the property of their respective
trademark owners. Projection images simulated.
2012 Panasonic Corporation. All rights reserved.