Nitoprime Zincrich TDS Reinforcement Primer
Nitoprime Zincrich TDS Reinforcement Primer
Nitoprime Zincrich TDS Reinforcement Primer
Data
Sheet
Uses
Nitoprime Zincrich is the recommended anti-corrosion primer
for exposed steel reinforcement for use with Renderoc
concrete repair mortars. The product provides a barrier to
further corrosive elements such as chlorides attacking the
steel. Compatible with all Renderoc mortars and fluid
micro-concretes.
Properties
Advantages
Excellent protective barrier to the steel from further
corrosive attack
Formulated for use with Renderoc repair products
Recommended thickness
per coat:
50 microns (dry)
@ 20C
@ 35C
45 minutes
15 minutes
Fully dry/recoatable:
@ 20C
@ 35C
Standards Compliance
Water Byelaws Scheme - approved product.
50 minutes - 1 hour
20 - 45 minutes
Application Instructions
Description
Preparation
Design Criteria
One or two coats of Nitoprime Zincrich are generally
required, dependent largely on nature and profile of the steel
substrate. Nitoprime Zincrich is recoatable generally between
30 minutes and 1 hour after the initial application. Application
of concrete repair materials may also proceed at this time. At
elevated temperatures, the recoatable and overlay times will
be reduced. The minimum application temperature for
Nitoprime Zincrich is 5C. Consult the local Parchem sales
office for further information.
Specification Clause
Steel reinforcement primer
The steel reinforcement primer shall be Nitoprime Zincrich, a
single-component zinc epoxy primer. An unbroken 50
microns thick coating shall be capable of providing a
protective barrier to further corrosive elements attacking the
steel. It shall be a suitable viscosity to enable the coating to
December 2009
Page 1
Estimating
Supply
Nitoprime Zincrich:
1 litre can
Solvent 10:
Product Code
322100
Nitoprime Zincrich 1L
Coverage
Nitoprime Zincrich:
8 m/litre (approx.)
Storage
Cleaning
Shelf life
Limitations
Storage conditions
Important notice
A Safety Data Sheet (SDS) and Technical Data Sheet (TDS) are available from the Parchem website or upon request from the nearest Parchem sales office. Read the SDS and TDS carefully
prior to use as application or performance data may change from time to time. In emergency, contact any Poisons Information Centre (phone 13 11 26 within Australia) or a doctor for advice.
Product disclaimer
This Technical Data Sheet (TDS) summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. You should read
this TDS carefully and consider the information in the context of how the product will be used, including in conjunction with any other product and the type of surfaces to, and the manner in
which, the product will be applied. Our responsibility for products sold is subject to our standard terms and conditions of sale. Parchem does not accept any liability either directly or indirectly for
any losses suffered in connection with the use or application of the product whether or not in accordance with any advice, specification, recommendation or information given by it.
*Manufactured and sold under license from Fosroc International
Limited. Fosroc and the Fosroc logo are trade marks of Fosroc
International Limited, used under license. *Denotes a trade mark of
Fosroc International Limited.
Page 2