Instructions For Qualatex Birthday Tower: Labor: Materials
Instructions For Qualatex Birthday Tower: Labor: Materials
Instructions For Qualatex Birthday Tower: Labor: Materials
Birthday Tower
Instructions:
1. Inflate two Dark Blue Quick Links to 10" (25cm) and tie into a
pair. Repeat to make a second pair. Tie the two pairs together to
make a chain, then tie the first and the last Quick Links together
to make a square (see Figure A). Make three more squares, and
set aside.
2. Inflate two 12" Lime Green Quick Links to 10" (25cm) and tie into
a pair. Inflate a third Quick Link and tie it onto the pair to make a
chain of three. Repeat to make three more chains. Set aside.
3. Inflate two 5" Onyx Black latex to 3.5" (9cm) and tie into a pair.
Repeat to make 15 more pairs.
4. Inflate a 5" Onyx Black latex to 3.5" and tie it onto one of the pairs
from Step 3 to make a 3-balloon cluster. Repeat to add another 3.5"
latex to seven more of the pairs. Set aside.
5. Tie one end of a Quick Link chain from Step 2 onto the
corner of a square from Step 1 (see Figure B). Repeat to tie the
remaining Quick Link chains to the other corners of the square.
6. Tie a sand weight onto one corner of the square from Step
5, and tie another sand weight to the opposite corner. Wrap a
3-balloon cluster from Step 4 onto all four corners to provide
stability and hide your mechanics.
Figure A
Figure B
Page 1 of 2
4-Balloon Cluster
TIPS
the cluster. Push the Microfoil gently into the top of the tower. Tie
each end of the monofilament into a corner of the top square to
help secure the Microfoil.
11. Inflate two 5" Lime Green latex to 2" (5cm) and tie into a loose
pair. Pull this pair below the foil and position it on the front and
back to hide the gaps.
Find more design ideas with Qualatex Quick Link Balloons
at QualatexQuickLinks.com. Other ideas and instructions
are available to professionals at Instruction Sheets and
Balloon Ideas on qualatex.com.
WARNING:
CHOKING HAZARD
SK-PBC1308037
Page 2 of 2