Components Catalouge

04/2007 e 04/2005
Build on formwork expertise
Products, know-how, service
www.doka.com
Contents
Brochure, 2007 edition

Copyright by Doka Industrie GmbH
A-3300 Amstetten
We reserve the right to make modifications in
the interests of technical progress.
Important notes:
Always observe all relevant safety regulations
applying to the use of our products in the country in which the products are used.
Many of the illustrations in this brochure show
situations during formwork assembly and so
may not always be complete from the safety
point of view.
Combinations of our formwork systems with
those of other manufacturers can entail risks
and this point should be checked with extreme
care.
Doka - The Formwork Experts

Doka. Always close at hand.
Doka. Forming the future!
4
6
Doka. Formwork expertise for

your construction projects.
Doka. The name for quality
and reliability.
Doka. Your requirements.

Our driving force.
Doka services.
The key to success.
Doka Formwork planning

Doka Ready-to-Use service
8
9
10
11
Doka advisors and site foremen

Doka on-site final inspection.
Doka Reconditioning service
Doka training
12
13
14
15
Doka Wall System

Framed formwork
Framax Xlife
Alu-Framax Xlife
Dokaset
Frami
Frami 270 I Frami 300
Timber-beam Formwork
18
38
48
62
72
Large-area formwork Top 50

Wall formwork FF 20
Circular formwork H 20
Faade formwork Top 50
Column Formwork
82
96
106
114
Column Formwork
Framax Xlife / Alu-Framax Xlife
Column Formwork KS
Column Formwork Top 50
Column Formwork RS
122
128
134
140
Doka Floor System

Dokamatic table
Doka Xtra
Dokaflex 1-2-4
Doka Load-bearing towers
148
172
182
192
Doka Climbing System

Platform SCP
Automatic climbing formwork SKE
Climbing formwork Xclimb 60
Climbing formwork GCS
Climbing formwork MF 240
Climbing formwork 150 F
196
198
202
204
206
214
Climbing formwork K
218
Dam formwork
224
Cooling-tower formwork SK 175 230
Doka Load-bearing Towers

Load-bearing towers Staxo
Load-bearing tower d2
Load-bearing tower SL-1
Composite forming carriage
Bridge edge beam formwork
Supporting construction frames
234
246
256
264
266
274
Working and Protection Platforms

Bracket platform M
Folding platform K
Guard rails
Ladder system XS
286
294
302
306
Doka System Components

Formwork beams
Formwork sheets
Dokadur panels
Floor props
Form ties / Suspension cones
Multi-trip packaging
312
314
318
320
322
334
Addresses
List of articles
336
338
Doka.
Always close at hand. All over
the world.
With more than 100 branches and dispatching locations all over
the world, Doka offers a close-meshed
network for products and services to cover every aspect of
formwork technology. That means fast,
on-time availability of all the formwork equipment you need,
combined with first-class consulting and formwork engineering
expertise.
Burj Dubai,
United Arab Emirates
The international network which cross-links all our locations, is

a network of our formwork know-how as well. So you benefit
from the global availability of proven hands-on solutions that
are both innovative and economical.
Ltschberg Tunnel,
Switzerland
Sutong Chang Jiang Bridge,

China
Palazzo Tower,
USA
4
Al Faisaliah Center,
Saudi Arabia
Ontario Tower,
Great Britain
Eleven Towers at Business Bay,

Krshegy Viaduct,
Hungary
Hilton Hotel Manchester,

Great Britain
Reichenbach Viaduct,
Germany
Waldo-Hancock Bridge,
USA
Bridge over the Lavant Valley,

Austria
Vienna Skylink,
Austria
Doka. Forming the future!
Doka. Formwork expertise

for your construction projects.
With more than 130 years experience in formwork technology, Doka is
one of the world's leading singlesource suppliers of innovative formwork and related services. This
means safety, expertise and reliability during the realisation of all your
construction projects.
Our customers preferences and requirements have always been at the
top of our list of priorities. Every
single Doka employee is committed
to ensuring that on your building
sites forming with highly productive
components, systems and services
can be quick, on time and costsaving. We rigorously direct all our
activities toward your requirements
and offer attractive formwork packages to ensure your competitive advantages. All around the world,
more and more construction companies build on the long-time experience of the Doka formwork experts
Doka. The name for quality

and reliability.
Ever quicker work cycles on the construction sites demand first-class quality in formwork equipment to keep
your construction projects moving
ahead on time and in line with a high
standard of quality. We meet your requirements by high-grade and qualityassured products and manufacturing
methods. The highly motivated Doka
workforce manufacture all system
components in modern production facilities. Very short delivery times and
end-to-end quality management make
sure that our customers get consistently high-quality formwork.
Also our in-depth knowledge of the
adequate material and its economical
processing with minimal environmental impact no matter if steel, aluminium, wood, and plastic or surface finishes is an important basis for
formwork systems meeting the practical needs of the sites. Using Doka
formwork rules out the unknown.
Doka works continuously to optimise
on-site handling and product durability and to minimise follow-up costs.
Doka. Your requirements

are our driving force
Innovations help you to complete challenging construction projects faster, with more safety and therefore more
economically. Our expert advisers, application engineers
and site foremen from all over the world integrate their
suggestions into the Doka innovation process.
Simultaneously, our development engineers study and

analyse construction methods, construction working
procedures and the utilisation of the latest results of research and contribute to keeping you right at the leading
edge with Doka products and services.
Doka services.
The key to success.
Choosing the right formwork system is a decisive step in ensuring the success
of a construction project. Doka supports the selection, planning and application
of its formwork systems with a range of services that prevent cost overruns for
formwork utilised on site and thus effectively ease the work of site managers
and foremen.
Doka formwork planning. We accompany

you at every step through the construction
process.
The process of finding the optimum formwork concept
for a structure starts in the tender phase. Often it is
here that the real decisions on the cost-effectiveness
of a construction project are made. Doka specialists
contribute at an early stage their comprehensive
knowledge and their vast experience from innumerable projects. That's how we accompany you right
through the entire construction project.
The intelligent formwork-planning software TiposDoka 6.0 is a made-to-measure tool for automatic
formwork planning. Some 20,000 proven solutions for
all Doka framed formwork, beam formwork and floor
formwork systems and for platforms can be clicked up
on screen. The programme also supports the design of
special formwork by AutoCAD and extensive structural analyses and the preparation of bills of materials
for working out offers.
Some fields of civil engineering call for highly specialised formwork solutions and unique know-how. This is
where the Doka Centres of Expertise come into their
own, because they handle projects of this nature at locations all over the world and are constantly adding to
their enormous stock of practical experience: The
Centres of Expertise for Automatic Climbing, Tunnels,
Cantilever Bridges, Composite Bridges and Project Management ensure reliability end to end, particularly in
projects that demand the highest level of scheduling,
commercial and engineering expertise.
Your benefits
Optimised formwork engineering based on

technical and time requirements of your
construction project
Site-oriented planning and engineering expertise,
including customised solutions
Computer-aided first-use planning and equipment
requirements calculation
Doka Ready-to-Use service.

On site and ready to go.
Your benefits
Our specialists in the Ready-to-Use service build every

formwork you need, perfectly dimensioned and in high
quality, for on-time delivery to the site of your construction project. You benefit from reduced assembly work
on site, so you save costs.
Avoidance of delays and unplanned extra costs

when work on site commences, because the formwork is preassembled
Precision-built, custom formwork produces better
results
Our consulting expertise optimises your formwork solutions
11
Doka expert advisers and site foremen.

Consulting and training are proximity to customers.
Your benefits
At Doka, co-operation starts with an awareness for and understanding of

the project. Our Doka expert advisers have their background in the construction industry. Internal and external training programmes keep their
knowledge and skills right up to date: with regard to rationalised use of
formwork resources and the latest in concrete construction techniques. The
Doka site foremen are the people who provide the support you need directly on site. They are experienced men and bring with them the know-how
amassed on many sites all over the world. They know all about our formwork systems on the one hand, and they are equally familiar with your requirements and situations on the other.
12
We understand the manifold

customer needs thanks to our
work on your site alongside
you
We brief your workers on site
Prompt solutions, even for
out-of-the-ordinary formwork
projects
Doka on-site final inspection.

Controlled return of rented formwork on the construction
site.
Your benefits
Doka on-site final inspection complies with many site managers need to
know on time if their formwork budget expectations are met. And they want
to end their project without diputes about rented formwork. Its simple: Depending on the degree of completion of construction work you arrange one
or more dates on your site to have the rented formwork inspected for return.
A specially trained Doka inspector will come to your site and, accompanied
by your appointed representative, check the rented formwork and record both
condition and quantity. Doka can also organise return transport on request.
Transparency and immediate

assessment of damaged material
no disputes later
Return as soon as the formwork
is no longer needed saves rental
fees
Coordinated return transport
reduces costs
Specially trained assessors
check the formwork immediate
decisions
13
Doka Reconditioning service.

Cleaning and reconditioning of Doka formwork.
Formwork has to be kept in good condition and well looked after if it is to produce the perfect concrete surfaces it should, and be used safely and quickly.
Specialists in the Doka Reconditioning Service Centres check the Doka formwork equipment for damage and dimensional accuracy and perform all the
requisite cleaning and repair work.
14
Your benefits
Professional formwork
cleaning and reconditioning
protects against cost overruns
Reconditioning of your own
formwork, too
Doka training
Your benefits
Construction sites all over the world mean experience
from all over the world. The specialist knowledge we
have amassed from many projects is something we pass
on to our customers. The Doka training programme
offers numerous seminars focusing on formwork application. We also deal regularly with special topics of the
construction industry.
Practical tips for the most efficient use of formwork

Latest information on innovative formwork systems
Save costs with safe and quick work by your
professionally trained crews
Seminars tailored to the needs specific to your
company
15
Doka Wall System
The Doka Wall System

Framed formwork
Doka offers a
wide range of
tried-and-tested wall
formwork for all
construction-site
situations, areas of
application, and
requirements relating
to the finished
concrete surface.
16
Framax Xlife
Alu-Framax Xlife
Dokaset
For large-area forming using

the crane
The crane-independent
version of Framax
The complete wall formwork

system for quick and easy
handling
Perm. fresh-concrete
pressure [kN/m2]
80 (with anchor system 20,0)
60
80
Panel heights [cm]
135/270/330
90/270
277
Panel widths [cm]
30/45/60/90/135/240
30/45/60/75/90
135/270
Heights, universal
panels [cm]
90/135/270/330
90/135/270
Widths, universal panels [cm]
90/120
75
System grid [cm]
15
15
Large panel [cm]
240x270/240x330
270x277
Frame material
Steel
Aluminium
Steel
Hot-dip galvanisation
Yes
Yes
Powder coating
Yes
Yes
Weight max./min.
[kg]
485/32
69/10
1003/460
Frame impressions
Yes
Yes
Yes
Join pattern
In grid
In grid
In grid
Form tie pattern
In grid
In grid
In grid
Sheeting
Xlife
Xlife
Xlife
Fixed panel sizes
Yes
Yes
Yes
Repositioning by hand
Yes
Area of application
[typical]
Large construction sites

Structural engineering
Residential buildings
Basements
Basements
High-rise structures
with regular floor plans
Timber-beam formwork
*
**
Frami
Frami 270 | 300
Top 50
FF 20
The handy
small-panel formwork
for foundations and
small areas
Crane-independent
wall formwork for
storey heights of 2.70
or 3.00 m
The large-area formwork for all shapes

and loads
The ready-to-go wall

formwork for highgrade fair-faced
concrete
40
67,5 (40*) | 60 (40*)
Any
50
120/150
120/150/270 | 150/300
Up to 1200
100/275/375**/650**
30/45/60/75/90
30/45/60/75/90
Up to 600
50/75/100/200
120/150
120/150/270 | 150/300
75
75
15
15
Stepless
25
200x650
Steel
Steel
Wood/steel
Wood/steel
Yes
Yes
43/19
75/19 | 85/23
692/58
Yes
Yes
No
No
In grid
In grid
Freely selectable
In grid
In grid
In grid
Freely selectable
In grid
Multi-ply sheet
Multi-ply sheet
Freely selectable
Three-ply sheet
Yes
Yes
Yes
Yes
Yes
Foundations
Small areas
Basements


stacked
not available with 27 mm
panel
17
Doka Wall System
Framed formwork
Framax Xlife
Maximised number of re-use cycles for cost effectiveness

The logical system grid means that Framax
framed formwork panels can be combined
at any time, upright or on their sides. The
units to be shifted are always compact, the
join pattern in the concrete is neat and tidy
without special stacking or corner panels.
New building at the Fachhochschule Steyr,
Austria
Construction work by:
Waizenauer & Ing. Schummer GmbH & Co KG
Framed formwork Framax Xlife
For large-area forming

using the crane
Framax is the framed formwork system that achieves a continuous
15 cm grid with no more than a small number of panels, upright or
on their sides. All connectors and all accessories fit seamlessly into
the grid for short forming times and high cost efficiency.
The new Framax Xlife formwork system ...

sets new standards for concrete quality and cost efficiency
prevents cost overruns as cleaning and reconditioning are easier and
service life longer
simplifies forming work in shafts, large-area forming, and the pouring
of self-compacting concrete
fresh
sible ssure
s
i
m
r
re
Pe
rete p
2
conc
m
/
80 kN
Plastic-coated Xlife panel and galvanised,

powder-coated steel frame ...
ensure high load-bearing capacity, excellent durability and easy cleaning
offer unparalleled cost-efficiency and extremely low follow-up costs
Logical system grid ...

means matching panel formats for best possible utilisation of the
formwork
reduces quantities in stock and costs for rental, because of effortless
adaptation to any floorplan
makes for compact lifting units for fast positioning and short crane times
produces a clear join pattern in the high-grade concrete surfaces
Form-tie distances as wide as 1.35 m ...

mean fewer anchors have to be set, so forming work is faster
reduces labour costs for post-casting work on the tie holes
15 cm grid with only 5 panel widths ...

simplifies planning, forming and logistics on the construction site
reduces the number of cost-intensive closures
Safe ladders and safe places to work ...

reduce the risk of accident and provide working conditions compliant with
the applicable health and safety regulations
19
Doka Wall System
The Framax Xlife system

450
600
900
1350
Framax Xlife
Matching panel formats ensure
best possible utilisation of
formwork
15 cm grid with only 5 panel
widths and 3 panel heights
simplifies planning, shuttering
and logistics on the construction
site
Practical cross-tie holes in the
frames ensure firm end
forming, dependable solutions
for corners and column
formwork
The sturdy, galvanised steel
frames produce smooth concrete
surfaces
1350
2700
3300
300
Framax Xlife panel

Maximised re-use cycles with
excellent concrete results for
unparalleled economy and fewer
changes of the sheeting
No flaking and less water
penetration through nail-holes
for longer usable lifecycle
Special surface structure for fewer
repair points and reduced
post-use costs
Wood/plastic layered panel that
can be cleaned with a high-pressure cleaner
2700
3300
2400
20
Framax large panels

240 cm x 270 cm
240 cm x 330 cm
For large-area formwork units,
fewer connectors, and short
repositioning times
The two panels can be used
upright and facing each other
The large panels are ideal for
fair-faced concrete.
Shaft formwork with stripping corner I

The Framax stripping corner I is
designed specifically for shafts. No
need to use the crane for formwork
erection and stripping in accordance
with accident prevention regulations
- cranking spindles makes the job
easy and all that is needed is a hammer, a length of rebar, or the convenient ratchet handle. The unit repositions in a single lift to save crane
time. The Framax stripping corner I
is also suitable for pilasters and as
an inside corner for wall formwork.
Universal panel SCC*

Self-compacting concrete (SCC) deaerates by itself and finds its own
level.
Ideal for complex geometries and
very highly reinforced structural
elements. No manual compacting
necessary.
The universal panel SCC permits SCC

to be pumped into the formwork from
below:
The universal panel SCC has a special

adapter with gate for connecting
the concrete pump.
Perfect de-aeration even for thin,

high and heavily reinforced walls
Walls are easily cast against
existing floors
Can be used for walls and for
casting into end shuttering
2700
1550
Large, conical anchor sleeves enable

the panels to be tilted on one or both
sides, and offset to different heights.
575
On account of its system grid,

Framax has a particularly large
distance between anchors of up to
1.35 m. This means up to 12% fewer
anchorages by comparison with
conventional framed formwork, and
correspondingly shorter shuttering
times. Labour costs for post-casting
work on anchor holes, too, are
diminished.
575
Anchors
1350
Closures
The multi-function clamp has a
clamping range of 15 cm and matches exactly the panel grid. In many
instances, a single closure per wall
is all that is necessary.
21
Doka Wall System
Working with Framax Xlife

Integrated waling system
Connecting rails over the

entire width of the panels
ensure speedy installation
of accessories such as
panel struts, universal
clamping railings and
pouring platforms quick
as a flash and without
mandatory points of
attachment.
Stacking without universal waling
The Framax multi function clamp ensures speedy stacking

up to panel heights of 5.40 m without universal waling.
The multi function clamp engages the frame section and
provides a joint of sufficient strength between the panels.
22
Connectors
Joining the panels takes a single

blow with the hammer for rapid
progress without additional tools.
Stacking with universal waling
Particularly when panels

are stacked high, universal
waling reinforces the
assembly, making it more
rigid. This allows large
assemblies to be lifted into
position and lowered with
the crane. The integrated
waling system makes
installation of the universal
waling quick and easy.
Corners and connections
Universal panel
3300
2700
1350
900
900
1200
Corners of any angle, end forming and T-joins can be made up quickly and reliably with the inside corners and hinged inside corners
and the versatile universal panels from the modular Framax system.
That means avoiding the high cost of improvisations built on site.
Framax universal panels come in 90 cm and 120 cm

widths and 90 cm, 135 cm, 270 cm and 330 cm heights.
The special pattern of holes makes these panels ideal
for the economical forming of outside corners, wall
connections, end shuttering and column formwork.
The safe way to pour concrete
Wide working platforms make

work faster and safer. Framax
pouring platforms fold out
quickly and drop into position
ready for pouring to commence.
See the user information

for more details.
23
Doka Wall System
References
The sophisticated logic of the
system grid means that Framax
framed formwork panels can be
combined upright or on their
sides. The result is a clear join
pattern, ideal for concrete surfaces that have to meet particularly
high requirements.
Installing the new platform system Xsafe is simplicity itself. For safety from the word go.
24
Framax is the right choice for

casting high walls in a very
short time. Shown here used
in combination with climbing
formwork MF 240 for this on
construction of this logistics
centre.
Anchor pitch is 1.35 m and

the formwork repositions in
large units, so forming times
for large areas are reduced
to an absolute minimum.
25
Doka Wall System
Platform system Xsafe
The platform system Xsafe has folding working platforms, telescopic ladders and side
railings to meet extra-high requirements for
safety at work.
The unbeatably fast safety system

The platform system Xsafe offers maximised safety for Doka wall
formwork. The preassembled folding working platforms with integral
side railings, telescopic ladders and self-closing access hatches are
immediately ready for use and make a decisive contribution to safety
on site.
Safety on a high level ...

with integrated ladders and secured passages
with reliably secured working platforms
for ergonomic working conditions compliant with the applicable health and
safety regulations
The folding working platforms are pre-assembled ...

for straightforward and speedy attachment to the formwork
for easy stacking and transportation
perfect in combination with framed formwork Framax Xlife
hot-dip galvanised components for excellent durability and cost efficiency
The platform system Xsafe ensures that working conditions are compliant with health and safety regulations and speeds up work on the
construction site. The fully preassembled platforms have only to be unfolded and fixed to the formwork. The side and back railings integrated into the platform, the telescopic ladders and the self-closing access hatches add up to maximised safety.
27
Doka Wall System

[kg]
Article n
210.0
126.5
91.5
77.7
61.5
106.3
68.5
50.5
41.0
31.8
259.3
154.5
114.7
97.9
78.5
588100500
588102500
588104500
588106500
588108500
588110500
588112500
588114500
588116500
588118500
588221500
588222500
588223500
588224500
588225500
[kg]
Article n
Doka Wall
Framed
formwork
SystemFramax Xlife
Framax Xlife panel 1.35x2.70m

Framax Xlife-Element

Framax Xlife-Element 2,70x2,70m
365.3 588109500
Galvanised
Overall depth: 12 cm
Galvanised, powder-coated

514.2 588608500
Galvanised

Framax Xlife-Element
87.0 588105500
46.5 588115500
107.5 588131500
Corners marked in grey

370.0 588103500
Framax Xlife special panels
Galvanised
Framax Xlife-Sonderelemente
On enquiry!
Available panel widths: 0.30 to 1.35m
Available panel heights: 1.35 to
2.70m
Framax Xlife universal panel 0.90x2.70m

Framax Xlife-Uni-Element
148.0
79.3
63.0
182.6
588122500
588124500
588120500
588228500
225.8
116.7
91.5
280.0
588601500
588603500
588604500
588671500
Corners marked in blue

484.9 588606500
Galvanised

28

[kg]
Framax Xlife universal panel SCC 0.90x2.70m
Framax Xlife-Uni-Element SCC 0,90x2,70m

Framax hose to panel coupler SCC

Framax-Spindelaufsatz SCC
Article n
170.3 588119500
Sperrschieber D125 SCC
Framax hinged outside corner A 2.70m

Framax-Scharnierecke A
Article n
52.8 588134000
27.4 588135000
Powder-coated, blue
10.0 588121000
Galvanised
Length: 48 cm
Diameter: 27 cm
Panel closure tool D125 SCC
[kg]
Framax closure plate R30 2.70m

Framax-Ausgleichsblech R30
43.0 588140000
21.4 588142000
14.4 588144000
Powder-coated, blue
Width: 38 cm
18.0 588127000
Galvanised
Length: 18 cm
Width: 33 cm
Height: 27 cm
Framax Xlife inside corner 2.70m

Framax Xlife-Innenecke
97.0 588130500
51.2 588132500
117.9 588229500
Framax circular forming plate 0.20x2.70m

Framax-Bogenblech
56.5
63.5
67.4
30.3
32.3
34.8
588235000
588236000
588237000
588238000
588239000
588240000
Framax outside corner 2.70m

Framax-Auenecke
47.0 588126000
23.5 588128000
58.0 588227000
Galvanised
Framax steel waling RD 0.40m
Framax-Stahlwandriegel RD 0,40m
Painted blue
Framax stripping corner I 2.70m

Framax-Ausschalecke I
8.7 588189000
171.5 588634000
90.0 588614000
211.8 588612000
Framax hinged inside corner I 2.70m

Framax-Scharnierecke I
102.3 588136000
55.4 588137000
125.5 588610000
Powder-coated, blue
Framax stripping spindle I
3.2 588618000
Framax-Ausschalspindel I
Galvanised
Height: 25 cm
29
Doka Wall System

[kg]
Framax quick acting clamp RU
Framax-Schnellspanner RU
Article n
3.3 588153400
[kg]
Framax tensioning wedge R
Framax multi function clamp

Framax-Uni-Spanner
Galvanised
Height: 11 cm
Packed in units of 120
5.2 588169000
Framax wedge bolt RA 7.5

Galvanised
Length: 15 cm
5.3 588168000
Framax-Ausgleichsspanner
Galvanised
Length: 48 cm
Never weld or heat tie-rods - risk
of fracture!
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementsttze 340
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe

Framax universal fixing bolt 10-16cm
Framax-Universalverbinder 10-16cm
Galvanised
Length: 26 cm
Galvanised
Length: 36 cm
Framax stop-end tie
0.34 588159000
Framax-Keilbolzen RA 7,5
Galvanised
Length: 40 cm
Framax adjustable clamp
0.20 588155000
Framax-Spannkeil R
Galvanised
Length: 20 cm
Article n
0.60 588158000
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
(C) Plumbing strut 340
14.2 588247000
Galvanised
Length: 190 - 341 cm
0.69 583002000
(D) Adjusting strut 120
7.2 588248000
Length: 80 - 130 cm
Galvanised
Delivery condition: folded closed
Observe all applicable safety regulations.
1.5 588143000
Framax-Stirnanker
Galvanised
Length: 29 cm
Perm. capacity: 15 kN
Framax pressure plate 6/15
0.80 588183000
Framax-Druckplatte 6/15
Galvanised
Framax universal waling 0.90m

Framax-Klemmschiene
Panel strut 540
49.0 588249000
(A) Prop head
3.5 588244000
Elementsttze 540
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
10.6 588150000
16.8 588148000
Painted blue
(B) Prop shoe
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
29.6 588250000
Galvanised

Framax universal corner waling
Framax-Eckklemmschiene
12.8 588151000
Galvanised
Painted blue
Leg length: 60 cm
Framax wedge clamp
1.5 588152000
Framax-Spannklemme
Galvanised
Length: 21 cm
30
10.6 588251000

[kg]
Article n
[kg]
Panel strut 340 without prop head
24.0 580365000
Eurex 60 550
(A) Plumbing strut 340
14.2 588247000
(A) Plumbing strut Eurex 60 550
Elementsttze 340 ohne Sttzenkopf

consisting of:
Galvanised
(B) Adjusting strut 120
7.2 588248000
Eurex 60 550
depending on length, comprising:
(C) Prop shoe
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
18.0 582651000
Powder-coated, blue
Aluminium
Length: 250 cm
(C) Prop head

Galvanised
42.5 582658000
Powder-coated, blue
Aluminium
(B) Extension Eurex 60 2.00m
Length: 80 - 130 cm
Article n
3.5 588244000
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(D) Coupler Eurex 60
8.6 582652000
Aluminium
Length: 100 cm
Diameter: 12.8 cm
(E) Plumbing strut shoe Eurex 60

consisting of:
42.2 580366000
29.6 588250000
Galvanised
10.6 588251000
(C) Prop shoe
2.1 588245000
8.5 582660000
Galvanised
Length: 31 cm
Width: 12 cm
Height: 33 cm
(F) Adjusting strut 540 Eurex 60
29.0 582659000
Galvanised
(G) Connector Eurex 60
3.9 582657000
Galvanised
Length: 15 cm
Width: 15 cm
Height: 30 cm
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
Delivery condition: separate parts

Galvanised
A
Universal dismantling tool
3.7 582768000
Universal-Lsewerkzeug
Galvanised
Length: 75.5 cm
Doka express anchor 16x125mm

Doka-Expressanker 16x125mm
0.31 588631000
Galvanised
Length: 18 cm
Follow fitting instructions!
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised
Diameter: 1.6 cm
31
Doka Wall System

[kg]
Framax bracket 90
Article n
12.5 588167000
Framax-Konsole 90
[kg]
Handrail clamp S
11.5 580470000
Schutzgelnderzwinge S
Galvanised
Width: 103 cm
Height: 185 cm
Delivery condition: railing included
Galvanised
Height: 123 - 171 cm
Handrail post 1.10m

Scaffold tube connection
Gerstrohranschluss
Gerstrohr 48,3mm
5.6 584384000
0.27 584375000
Schutzgelnder 1,10m
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
Side handrail clamping unit T
Galvanised
Height: 134 cm
Galvanised
Height: 7 cm
Scaffold tube 48.3mm 1.00m

Scaffold tube 48.3mm .....m
Article n
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Seitenschutzgelnder T
29.1 580488000
Galvanised
Height: 112 cm
Galvanised
Framax lifting hook

Screw-on coupler 48mm 50
0.84 682002000
Anschraubkupplung 48mm 50
Framax-Umsetzbgel
Galvanised
Height: 22 cm
Max. load: 1000 kg
Follow the directions in the "Operating Instructions"!
Galvanised
Width-across: 22 mm
Framax pouring platform O 1.25/2.70m
117.0 588360000
Framax-Betonierbhne O 1,25/2,70m
Timber parts varnished yellow
Steel parts galvanised
Framax stacking cone

Framax-Stapelkonus
0.02 588234000
Blue
Diameter: 2 cm
It is strictly forbidden to move
stacks of panels without any safeguard (e. g. stacking cones)
against slippage.
Doka 4-part chain 3.20m

Doka-Vierstrangkette 3,20m
Framax pouring platform U 1.25/2.70m
10.6 588149000
15.0 588620000
Max. load: With angle of inclination
30: 2400 kg (with 2 cables) or
3600 kg (with 4 cables)
127.5 588377000
Framax-Betonierbhne U 1,25/2,70m
Framax transport bolt 5kN

Framax-Transportbolzen 5kN
1.9 588621000
Max. load: 500 kg
32

[kg]
Framax transport gear
Article n
13.3 588232000
Framax-Transportgehnge
Galvanised
Max. load: 2000 kg with all 4 slinging
hooks and an angle of inclination of
max. 45.
Dokamatic lifting strap 13.00m

Dokamatic-Umsetzgurt 13,00m
[kg]
Framax steel closure plate 5cm 2.70m
Framax-Stahlausgleich
Article n
14.0 588273000
7.9 588272000
17.2 588274000
Powder-coated, blue
10.5 586231000
Green
Max. load: 2000 kg
The GS safety mark only applies to
the strap itself!
Framax fitting timber 2x12cm 2.70m

Framax-Passholz
3.1
4.7
7.8
15.5
3.8
5.7
9.5
19.0
176020000
176022000
176024000
176026000
176021000
176023000
176025000
176027000
Connecting timber
0.70 176030000
Anklemmholz
Varnished yellow
Width: 10 cm
Varnished yellow
Framax triangular ledge 2.70m

Framax-Dreikantleiste 2,70m
0.38 588170000
Framax moulded timber 27mm 2.70m

Framax-Profilholz
7.6
8.0
8.4
9.3
9.8
10.2
176012000
176010000
176119000
176013000
176011000
176120000
Varnished yellow
Framax frontal triangular ledge 2.70m

Framax-Stirndreikantleiste 2,70m
1.9 588129000
Grey
Framax anchoring bracket
1.4 588188000
Framax-Ankerhaltewinkel
Painted blue
Width: 9 cm
Height: 13 cm
Framax formwork stripping timb. 10x12cm 2.85m

Framax-Ausschalholz
Varnished yellow
16.4 176008000
19.9 176014000
Framax foundation clamp 0.90m
Framax-Fundamentspanner 0,90m
Galvanised
Framax clamping bolt 4-8cm

Framax-Klemmschraube 4-8cm
4.9 588141000
0.39 588107000
Galvanised
Length: 19 cm
33
Doka Wall System

[kg]
Doka perforated tape 50x2.0mm 25m
Doka-Lochband 50x2,0mm 25m
Article n
17.0 588206000
Perm. capacity: will depend on the

foundation clamp of the formwork
system used.
Universal plug R20/25
[kg]
Article n
Access system XS
Connector XS Wall formwork
Anschluss XS Wandschalung
20.8 588662000
Galvanised
Width: 89 cm
Height: 63 cm
0.003 588180000
Kombi Ankerstopfen R20/25

Blue
Diameter: 3 cm
Framax plug R24.5
Connector XS Framax/Alu-Framax
0.003 588181000
Framax-Abdeckstopfen R24,5
Anschluss XS Framax/Alu-Framax
Galvanised
Length: 115 cm
Yellow
Diameter: 2 cm
Plug for closure plate R25
0.003 588187000
Ausgleichsblechstopfen R25
Doka stacking pallet 1.55x0.85m

Doka-Stapelpalette 1,55x0,85m
System ladder XS 4.40m
33.2 588640000
System-Leiter XS 4,40m
Black
Diameter: 3 cm
11.2 588639000
Galvanised
42.0 586151000
Galvanised
Height: 77 cm
Max. load: 1100 kg

39.5 583016000
Galvanised
Height: 77 cm
Max. load: 1000 kg
Doka accessory box

Length: 154 cm
Width: 83 cm
Height: 77 cm
Max. load: 1000 kg
Bolt-on castor set
Galvanised
Securing barrier XS
4.9 588669000
Sicherungsschranke XS
Galvanised
Length: 80 cm
33.5 586154000
Anklemm-Radsatz
consisting of:
(A) Bolt-on castors, complete

2 pcs.
Height: 23 cm
Ladder cage XS 1.00m

16.5 588643000
10.5 588670000
Rckenschutz XS
(B) Heavy-duty wheels, complete

2 pcs.
Height: 32 cm
34
19.1 588641000
Leiterverlngerung XS 2,30m
106.4 583010000
Doka-Kleinteilebox
Ladder extension XS 2.30m
Painted blue
Max. load: 1100 kg
Fit onto the Doka stacking pallet and
the Doka accessory box.
Galvanised

[kg]
Ladder cage exit XS
Article n
17.0 588666000
Rckenschutz-Ausstieg XS
[kg]
Xsafe handrail lengthening piece
Xsafe-Gelnderverlngerung
Galvanised
Height: 132 cm
Article n
5.6 587736000
Galvanised
Length: 74 cm
Height: 61 cm
Xsafe platform transition
21.0 587735000
Xsafe-Bhnenbergang
Galvanised
Length: 85 cm
Width: 50 cm

Xsafe platform 2.65m
Xsafe platform 1.30m
202.6 587732000
161.0 587733000
Xsafe-Bhne
19.3 587742000
Xsafe-Teleskopleiter

Xsafe front railing 2.45m

Xsafe front railing 1.10m
Xsafe telescopic ladder

Galvanised
Width: 37 cm
20.3 587737000
15.6 587738000
Xsafe-Stirngelnder
Galvanised
Height: 195 cm
Xsafe ladder extension 125cm

Xsafe-Leiternverlngerung 1,25m
8.1 587743000
Galvanised
Width: 37 cm
Xsafe front railing holder
5.2 587739000
Xsafe-Stirngelnderhalter
Galvanised
Height: 62 cm
Xsafe ladder holder
6.6 587744000
Xsafe-Leiternhalter
Galvanised
Length: 80 cm
Xsafe platform extension 0.55m

Xsafe-Bhnenverlngerung 0,55m
41.0 587734000

Xsafe ladder support
1.1 587745000
Xsafe-Leiternsttze
Galvanised
Length: 19 cm
35
Doka Wall System

[kg]
Xsafe support adaptor
21.5 587741000
Xsafe-Sttzenadapter
Galvanised
Height: 105 cm
36
Article n
[kg]
Article n
You will find more details on our formwork systems

in our User Information brochures.
Doka Wall System
Framed formwork
Alu-Framax Xlife
The Alu-Framax Xlife framed formwork

is a complete system with high-end safety
and working accessories. The lightweight
panels can be set up by hand and fit the
logical grid of the Framax system.
Dwelling house in Weyregg, Austria
Construction work by: Fa. Redl, Linz
Framed formwork Alu-Framax Xlife
The crane-independent version of

Framax
The lightweight Alu-Framax Xlife brings all the advantages of Framax
framed formwork to sites where crane assistance is not an option.
And of course these panels combine seamlessly with Framax Xlife.
The handy Alu-Framax Xlife formwork system ...

is specifically designed for use on sites where crane assistance is not available
is fully compatible with Framax Xlife. All accessories fit both systems for
straightforward on-site logistics.
has lightweight but sturdy aluminium frames to produce smooth concrete
surfaces
eshble fr ure
i
s
s
i
Perm ete press
r
2
conc
/m
60 kN
Superb product quality

with the plastic-coated Xlife panel ...
high load-bearing capacity, excellent durability and easy cleaning
unparalleled cost-efficiency and extremely low follow-up costs
Logical system grid ...

means matching panel formats for best possible utilisation of formwork
resources
makes for compact lifting units for fast positioning and short crane times
produces a clear join pattern in the high-grade concrete surfaces

reduces the number of expensive closures
Alu-Framax Xlife and Framax Xlife are compatible ...

the same accessories can be used
the site can be divided into zones for manual work and crane-assisted work
Safe ladders and safe places to work ...

reduce the risk of accident and provide working conditions compliant with
the applicable health and safety regulations
39
Doka Wall System
The Alu-Framax Xlife system
900
2700
300
450
600
750
900
Alu-Framax Xlife
Matching panel formats for best
possible utilisation of formwork
resources
widths and 2 panel heights
simplifies planning, shuttering
and logistics on the construction
site
The high-grade powder coating
reliably prevents the concrete
from sticking to the frames of the
Alu-Framax panels
Integrated waling system:
Connecting rails across the
entire width of the panels for
easy installation of accessories
without mandatory points
of attachment
Stacked on the practical Alu-Framax

pallets, the panels are easy to unload
at the site.
Framax Xlife panel

excellent concreting results for
No flaking and less water penetration through nail-holes for longer
usable lifecycle
repair points and reduced
post-use costs
40
Working with Alu-Framax Xlife
The combination of Framax Xlife with Alu-Framax Xlife means that

the site can be divided into crane-assisted and manual forming zones for more flexible logistics and faster construction progress.
The Framax circular forming plate and the Alu-Framax Xlife panels
can be used to shape the formwork for polygonal curves.
The panels combine effortlessly upright and turned flat so it s easy to set up the formwork
for foundations even where crane support is unavailable.
The Alu-Framax Xlife system, too, includes

universal panels: 75 cm wide and ideal
for columns, end formwork and corners.
41
Doka Wall System

[kg]
Article n
68.8
55.7
47.8
40.1
30.0
25.6
21.6
17.8
15.4
11.5
588301500
588302500
588304500
588306500
588308500
588310500
588312500
588314500
588316500
588318500
[kg]
Article n
Doka Wall
Framed
formwork
SystemAlu-Framax Xlife
Alu-Framax Xlife panel 0.90x2.70m

Alu-Framax Xlife-Element

Framax-Scharnierecke I
102.3 588136000
38.8 588352000
Powder-coated, blue
Powder-coated

Framax-Scharnierecke A
52.8 588134000
17.6 588350000
Powder-coated, blue

Alu-Framax Xlife-Element
44.4 588305500
17.1 588315500
Powder-coated
Alu-Framax Xlife universal panel 0.75x2.70m

Alu-Framax Xlife-Uni-Element
64.2 588322500
33.8 588324500
27.0 588326500
Framax-Ausgleichsblech R20
Powder-coated
Alu-Framax Xlife inside corner 2.70m

Alu-Framax Xlife inside corner 0.90m
Alu-Framax Xlife-Innenecke

27.5 588340000
9.0 588344000
Powder-coated, blue
Width: 26 cm
50.3 588330500
18.5 588332500
Powder-coated

Framax-Bogenblech
56.5
63.5
67.4
21.6
23.5
24.6
588235000
588236000
588237000
588241000
588242000
588243000

Framax-Auenecke
Galvanised
47.0 588126000
16.0 588336000
Framax steel waling RD 0.40m
8.7 588189000
3.3 588153400
Framax-Stahlwandriegel RD 0,40m
Painted blue
Galvanised
Length: 20 cm
42

[kg]
Framax-Uni-Spanner
Article n
5.2 588169000
Galvanised
Length: 40 cm
Framax adjustable clamp
5.3 588168000
Framax-Ausgleichsspanner
Galvanised
Length: 48 cm
of fracture!
[kg]
Article n
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementsttze 340
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
14.2 588247000
Galvanised
Galvanised
Length: 26 cm
Galvanised
Length: 36 cm
Framax stop-end tie
0.60 588158000
0.69 583002000
Galvanised
Length: 29 cm
0.80 588183000
7.2 588248000
Length: 80 - 130 cm
Galvanised
1.5 588143000
Framax-Stirnanker
Panel strut 540
49.0 588249000
(A) Prop head
3.5 588244000
Elementsttze 540
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
Galvanised

Framax-Klemmschiene
10.6 588150000
16.8 588148000
29.6 588250000
Galvanised
10.6 588251000

Painted blue

Galvanised
12.8 588151000
Painted blue
Leg length: 60 cm
Framax wedge clamp
1.5 588152000
Framax-Spannklemme
Galvanised
Length: 21 cm
3.7 582768000
Galvanised
Length: 75.5 cm
43
Doka Wall System

[kg]
Article n
0.31 588631000
Galvanised
Length: 18 cm
Doka coil 16mm
[kg]
Article n
127.5 588377000
0.009 588633000
Doka-Coil 16mm
Galvanised
Diameter: 1.6 cm
Framax bracket 90
Handrail clamp S
11.5 580470000
Galvanised
12.5 588167000
Framax-Konsole 90
Galvanised
Width: 103 cm
Height: 185 cm

29.1 580488000
Galvanised
Height: 112 cm

Gerstrohr 48,3mm
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Framax lifting hook

Framax-Umsetzbgel
Galvanised
Height: 22 cm
Max. load: 1000 kg
Galvanised
Framax stacking cone

Framax-Stapelkonus

Galvanised
Height: 7 cm
0.84 682002000
117.0 588360000
Framax-Betonierbhne O 1,25/2,70m
44

15.0 588620000
Galvanised
Width-across: 22 mm
Framax pouring platform O 1.25/2.70m
0.02 588234000
Blue
Diameter: 2 cm
It is strictly forbidden to move
stacks of panels without any safeguard (e. g. stacking cones)
against slippage.
0.27 584375000
Gerstrohranschluss
10.6 588149000

[kg]
Framax transport gear
Article n
13.3 588232000
Framax-Transportgehnge

Framax-Stahlausgleich
Galvanised
Max. load: 2000 kg with all 4 slinging
hooks and an angle of inclination of
max. 45.
[kg]
Article n
14.0 588273000
6.0 588271000
Powder-coated, blue
10.5 586231000
Green
Max. load: 2000 kg
the strap itself!

Framax-Passholz
3.1
4.7
7.8
15.5
176020000
176022000
176024000
176026000
Connecting timber
0.70 176030000
Anklemmholz
Varnished yellow
Varnished yellow
Width: 10 cm

0.38 588170000

Framax-Profilholz
7.6 176012000
8.0 176010000
8.4 176119000

Grey
Varnished yellow
Framax anchoring bracket
1.4 588188000
Framax-Ankerhaltewinkel

Framax-Ausschalholz 10x12cm 2,85m
Varnished yellow
1.9 588129000
Painted blue
Width: 9 cm
Height: 13 cm
16.4 176008000
Framax foundation clamp 0.90m
Framax-Fundamentspanner 0,90m
Galvanised

4.9 588141000
17.0 588206000

system used.
45
Doka Wall System

[kg]
Article n
0.003 588180000

Blue
Diameter: 3 cm
Framax plug R24.5
[kg]
Access system XS
20.8 588662000
Galvanised
Width: 89 cm
Height: 63 cm
0.003 588181000
Article n
Yellow
Diameter: 2 cm
Plug for closure plate R25
0.003 588187000
Ausgleichsblechstopfen R25
Black
Diameter: 3 cm
Alu-Framax pallet
11.2 588639000
Galvanised
Length: 115 cm
126.7 588396000
Alu-Framax-Palette
Galvanised
Length: 280 cm
Width: 110 cm
Height: 107 cm
Max. load: 1200 kg

33.2 588640000
Galvanised
42.0 586151000
Galvanised
Height: 77 cm
Max. load: 1100 kg
Doka accessory box
106.4 583010000
Doka-Kleinteilebox

Galvanised

Length: 154 cm
Width: 83 cm
Height: 77 cm
Max. load: 1000 kg
Bolt-on castor set
19.1 588641000
33.5 586154000
Anklemm-Radsatz
consisting of:
Securing barrier XS
4.9 588669000
Galvanised
Length: 80 cm
2 pcs.
Height: 23 cm

2 pcs.
Height: 32 cm
46
Painted blue
Max. load: 1100 kg

16.5 588643000
10.5 588670000
Rckenschutz XS
Galvanised

[kg]
Ladder cage exit XS
Article n
[kg]
Article n
17.0 588666000
Galvanised
Height: 132 cm
47
Doka Wall System
Dokaset
The individual Dokaset components are designed for

speedy, straightforward use. So this formwork is
extremely cost-efficient, combining economy with
outstanding on-site safety for users.
Spindelbaumweg, Linz, Austria
Construction work by: Gebrder Lang & Co
Dokaset
The complete wall-formwork

system for quick and easy handling
Dokaset is the fast and economical wall formwork for high-rise structures. All the tasks involved in preparing the formwork, including attaching
slings and installing anchors, can be handled quickly and easily on the
ground. Fully preassembled working platforms, the revolutionary Xlife
formwork panel and the wide anchor pitch are characteristic of this allinclusive system.
The fastest formwork system for walls ...

up to 50 % fewer anchor points than conventional framed formwork systems
work on the anchors is from one side only, so forming proceeds all the faster
easy handling for installation
reshible f sure
s
s
i
m
Per ete pres
r
2
conc
m
/
80 kN
Maximum safety for forming operations and concreting ...

Installing anchors and attaching slings are operations handled on the ground
integrated ladders, working platforms and guard rails
Extremely economical ...

the number of anchors needed is small, and the anchors themselves install quickly
and easily
steel frames hot-dip galvanised inside and outside
Xlife panel, durable and easy to clean
wide pitch of the anchors allows for short forming times
Maximum versatility ...

easily combined with Framax Xlife and Alu-Framax Xlife
height is increased quickly by combining elements from the Framax Xlife modular
system
system-integrated corner solution with no additional anchoring
49
Doka Wall System
The Dokaset system

30-135
Dokaset
277
Sturdy, large-area panels minimise

the number of anchors required
Integrated platforms and ladders
for optimised safety
Sturdy steel frames, galvanised
inside and out, for smooth concrete
surfaces
stacking panels from the Framax
Xlife modular system for formwork
heights up to 412 cm
270
135
30
40
60
Framax Xlife panel

excellent concreting results for
No flaking and less water penetration through nail-holes for longer
usable lifecycle
repair points and reduced postuse costs
Galvanised
steel frame
The sturdy steel frames of the
Dokaset panels are hot-dip galvanised inside and out.
For outstanding durability and for
smooth concrete surfaces.
50
Dokaset
The anchors are few in number and quick to install
Wide anchor pitch
Pressure anchors at the top

edge automatically hold the
two faces of the formwork
exactly the right distance
apart. These anchors do not
have to be handled.
57,5
155
57,5
98 cm
270
A wide anchor pitch means fewer anchors. That translates into savings on
materials, labour and costs and adds
up to maximised cost effectiveness.
Tension anchors can be worked

ergonomically and speedily from
only one side of the formwork.
Maximum safety for

forming and concreting
Safe repositioning
The crane attachment can be

reached directly from the
ground. For the highest standard of operational safety.
The complete formwork units

are moved quickly and directly
into position for the next pour.
The access to the working platform has optimised safeguards. A

ladder can be integrated for speedy and safe ascent and descent.
The working platform with back rails and side rails offers allround protection when casting the concrete.
51
Doka Wall System
Working with Dokaset

Compact for transport
Speedy assembly
Connecting panels
Dokaset folds flat, so the compact units

can be stacked to save space for storage
and for transport.
Dokaset is soon ready to go; no more than

minimal preparation is necessary. Just
open out the platform and the rails.
Connect panels by a single blow with

the hammer for rapid progress
without additional tools.
Combination
with framed formwork
Forming corners without

anchors
Easy height adjustment
Dokaset combines with framed formwork

Framax Xlife panels or with the lightweight
manual formwork Alu-Framax Xlife to adapt
to any floor plan.
The special Dokaset corner solution is for

corners up to wall thicknesses of 25 cm
without additional anchors. Integrated
crane attachment points make for fast lifts.
Whenever adjustments have to be made

for differences in height, panels from the
Framax Xlife system can be used to make
up heights up to 4.12 m.
52
Dokaset
References
Dokaset is the complete system formwork for professional wall forming. Ease of use saves time and makes this system a highly economical
alternative in high-rise construction work.
Dokaset incorporates a full range of safety components and is quickly ready for use.
The anchors can be worked from one side

for ergonomic and time-saving work
routines.
53
Doka Wall System
Dokaset F
135
277
Dokaset F is optimised for the requirements specific to the French construction market. It has integrated safety, is immediately ready for use, and
combines easily with Framax Xlife. The complete
formwork with the non-rusting Framax Xlife panel
is ideal for good concrete surfaces and is both
maintenance-friendly and durable.
30-135
for the special requirements of the French construction market
270
135
Dokaset supporting elements and units from the Framax Xlife

modular system for formwork heights up to 8.10 m.
The access to the working platform has optimised safeguards. Integrated ladders and hatches in the platform floor ensure speedy
and safe ascent and descent.
54
The working platform has back and side guard rails as standard. A
telescopic guard rail for the open side ensures all-round protection.
Dokaset F
The Framax Xlife panel leaves no rust

marks and ensures clean and smooth
concrete faces.
Dokaset F has all the safety features (platform, guard rails, ladders, props) pre-installed
and ready for immediate use.
Dokaset F complies with the high safety requirements fixed by French health and safety
legislation.
55
Doka Wall System

[kg]
Article n
[kg]
Article n
Doka Wall System

Dokaset
Dokaset panel 2.70x2.70m
810.0 588900000
Dokaset-Element 2,70x2,70m
Dokaset counter railing 2.70m

Dokaset counter railing 1.35m
Dokaset-Gegengelnder
Galvanised
Height: 282 cm
Height: 183 cm
Dokaset outside corner 3.30m

Dokaset-Auenecke 3,30m
Dokaset panel 2.70x2.70m with platform
20.0 588741000
15.0 588742000
278.0 588914000
1065.0 588901000
Dokaset-Element 2,70x2,70m mit Bhne

Galvanised
Height: 282 cm
Dokaset bottom angle for inside corner
Dokaset-Bodenwinkel fr Innenecke
Height: 7.5 cm
Dokaset ladder 2.70m
19.0 588904000
Dokaset-Leiter 2,70m
Dokaset panel 1.35x2.70m
Galvanised
Length: 212 cm
Width: 37 cm
440.0 588902000
Dokaset-Element 1,35x2,70m
7.0 588913000
Height: 282 cm
Dokaset panel 1.35x2.70m with platform
540.0 588903000
Dokaset-Element 1,35x2,70m mit Bhne

Height: 282 cm
Dokaset railing holder 30 degree

Dokaset railing holder 15 degree
Dokaset-Gelnderhalter
2.0 588915000
2.0 588916000
Galvanised
Height: 18 cm
Handrail post 1.00m
3.8 584335000
Gelnder 1,00m
Galvanised
Length: 124 cm
Dokaset counter railing holder

Dokaset-Gegengelnderhalter
4.0 588912000
Length: 31 cm
Xsafe platform extension 0.55m

Xsafe-Bhnenverlngerung 0,55m

56
41.0 587734000
Dokaset head anchor 12-36cm

Dokaset-Kopfanker 12-36cm
Galvanised
Length: 47 - 71 cm
5.0 588905000
Dokaset
[kg]
Dokaset tension tie 10-30cm
Article n
13.3 588910000
Dokaset-Zuganker 10-30cm
[kg]
Dokaset tie hole reduction 20.0

Dokaset-Ankerlochreduktion 20,0
0.60 588911000
Framax-Uni-Spanner
Framax-Klemmschiene
0.31 588631000
3.3 588153400
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised
Diameter: 1.6 cm
5.2 588169000
Dokaset 2-part chain 1.50m
Galvanised
Length: 40 cm


Galvanised
Length: 18 cm
Galvanised
Length: 20 cm
Galvanised
Length: 75.5 cm
Galvanised
Length: 20 cm
3.7 582768000
Galvanised
Length: 115 cm
Perm. capacity with safety factor of
1.6: 220 kN
Perm. capacity to DIN 18216: 150 kN
Article n
6.0 588917000
Dokaset-Zweistrangkette 1,50m
Dacromete coated
45: 2650 kg (with 2 cables)
10.6 588150000
16.8 588148000
Painted blue
Fibre concrete plug 35mm

0.11 588923000
0.14 588924000
Faserbetonstopfen
Grey
Framax wedge clamp
1.5 588152000
Framax-Spannklemme
Galvanised
Length: 21 cm
Dokaset closure cone 20cm
0.60 588925000
Dokaset-Verschlusskonus 20cm
Length: 19.2 cm
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementsttze 340
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe
Dokaset F panel 2.70x2.70m with platform

2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
Dokaset F
984.0 588721000
Dokaset F-Element 2,70x2,70m m. Bhne

Galvanised
Length: 284 cm
Width: 270 cm
Height: 40 cm
14.2 588247000
Galvanised
7.2 588248000
Length: 80 - 130 cm
Galvanised
57
Doka Wall System

[kg]
Dokaset F panel 2.70x2.70m
Article n
810.0 588720000
Dokaset F-Element 2,70x2,70m
[kg]
Dokaset F spindle 10cm
4.6 588732000
Dokaset F-Spindel 10cm
Galvanised
Length: 284 cm
Width: 270 cm
Height: 33 cm
Article n
Galvanised
Height: 27 cm
Dokaset F platform decking 2.70m

Dokaset F platform decking 1.35m
Dokaset F-Bhnenbelag
112.0 588726000
72.0 588727000
Galvanised
Painted blue
Dokaset F panel 1.35x2.70m with platform
575.0 588723000
Dokaset F-Element 1,35x2,70m m. Bhne

Length: 284 cm
Width: 135 cm
Height: 48 cm
Dokaset F panel 1.35x2.70m
Dokaset F-Rckengelnder
68.0 588735000
57.0 588736000
Galvanised
412.0 588722000
Dokaset F-Element 1,35x2,70m
Length: 284 cm
Width: 135 cm
Height: 38 cm
Dokaset F sub panel 2.70x1.35m
Dokaset F-Unterstockelement 2,70x1,35m

Length: 141 cm
Width: 270 cm
Height: 33 cm
Dokaset F sub panel 1.35x1.35m
Dokaset F-Unterstockelement 1,35x1,35m

Length: 141 cm
Width: 135 cm
Height: 33 cm
58
Dokaset F back railing 2.70m

Dokaset F back railing 1.35m
352.0 588724000
Dokaset F handrail lengthening piece 1.35m

Dokaset F-Gelnderverlngerung 1,35m
Galvanised
Length: 140 cm
Dokaset F ladder 2.70m
13.0 588737000
Dokaset F-Leiter 2,70m
Galvanised
Length: 204 cm
Width: 37 cm
181.0 588725000
5.5 588733000
Dokaset
[kg]
Dokaset F ladder extension 1.35m
Dokaset F-Leiternverlngerung 1,35m

Galvanised
Length: 141 cm
Width: 37 cm
Article n
8.6 588728000
[kg]
Article n
42.2 580366000
29.6 588250000

consisting of:
Galvanised
10.6 588251000
(C) Prop shoe
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
Dokaset F ladder step board

Dokaset F-Leiterntrittbrett
Galvanised
5.0 588738000
Galvanised
Length: 68 cm
Width: 31 cm
Xsafe ladder support
1.1 587745000
Xsafe-Leiternsttze
Galvanised
Length: 19 cm
Dokaset F stacking plate
11.5 588729000
Dokaset F-Aufstocklasche
Dokaset F supporting strut
Painted blue
Length: 58 cm
7.0 588730000
Dokaset F-Sttzenstrebe
Galvanised
Length: 108 cm
3.7 582768000

Galvanised
Length: 75.5 cm
3.3 588153400
Galvanised
Length: 20 cm

Dokaset box 30x26cm
6.4 588734000
Dokaset-Box 30x26cm
Galvanised
Length: 18 cm
Galvanised
Doka coil 16mm

Prop head
3.5 588244000
Sttzenkopf
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
0.31 588631000
0.009 588633000
Doka-Coil 16mm
Galvanised
Diameter: 1.6 cm
0.003 588180000

Blue
Diameter: 3 cm
Dokaset 2-part chain 1.50m

Dokaset-Zweistrangkette 1,50m
6.0 588917000
Dacromete coated
45: 2650 kg (with 2 cables)
59
Doka Wall System

[kg]
Lifting chain 100cm 15kN
Article n
1.8 587548000
Anschlagkette 100cm 15kN
Length: 103 cm
Max. load: 1500 kg

42.0 586151000
Galvanised
Height: 77 cm
Max. load: 1100 kg

39.5 583016000
Galvanised
Height: 77 cm
Max. load: 1000 kg
Doka accessory box
106.4 583010000
Doka-Kleinteilebox

Length: 154 cm
Width: 83 cm
Height: 77 cm
Max. load: 1000 kg
Bolt-on castor set
33.5 586154000
Anklemm-Radsatz
consisting of:

2 pcs.
Height: 23 cm

2 pcs.
Height: 32 cm
Painted blue
Max. load: 1100 kg
Dokaset F anchoring nut 20.0

Dokaset F-Ankermutter 20,0
Galvanised
Length: 13 cm
60
2.0 588731000
[kg]
Article n

Doka Wall System
Framed formwork Frami
The handy small-panel Frami formwork is

purpose-designed for foundations,
basement walls, drainage shafts, low
retaining walls, parapets and other,
similar small structures. Entire panel
assemblies can also be hoisted easily
into position by crane.
Joint venture FCP Lot 2 Grohadern, Germany
Construction work by: Fa. Fuchs, Fa. Bilfinger Berger
The handy small-panel formwork

for foundations and small areas
Frami is a well-designed small-panel formwork system with a
logical system grid that is intended specially for fast, economical
forming of foundations and small areas.
Extremely stable design ...

with torsion-resistant hollow steel sections
for speedy forming without extra bracing
with high-grade hot-dip galvanisation for durability
produces smooth concrete faces on account of the stable formwork panels
shle fre re
b
i
s
s
i
Perm ete pressu
r
2
conc
m
/
40 kN

reduces the number of expensive closures
permits forming of walls, columns and foundations
Practical accessories save forming time ...

with self-aligning, quick-action panel connectors
with wide choice of anchor options
Adaptation to any floor plan ...

with stepless height adaptation
ideal for foundations and small surfaces of all kinds
also for end shuttering and wall joins
63
Doka Wall System
The Frami system

Frami
450
600
750
900
Logical system grid with heights

of 1.20 m and 1.50 m and widths
from 30 to 90 cm for optimum
adaptation to the planned
structure
Universal panel 75 cm wide with
perforations rail for outside
corners and columns
Large panel assemblies can be
braced with aligning clamps or
universal waling for quick
repositioning by crane
1200
1500
300
The panel frames are made of resistant

hollow-section steel sections and are
inherently torsionally rigid without
additional bracing. The high-grade hot-dip
galvanisation ensures extra durability.
Stepless height offset

The all-round bead in the frame means that the Frami clamps can be set
wherever they are needed. This means that the panels can be vertically offset
relative to each other by any distance, without a predefined grid in other
words. No additional work is necessary to allow for steps, gradients and surface irregularities.
A single blow with a hammer and the

Frami clamp pulls the panels together and
holds them firmly, flush and in correct
alignment.
64
Working with Frami

Corners
Closures
max. 15 cm
The Frami universal panel is ideal

for forming right-angled corners
with wall thicknesses up to 45 cm
in a 5 cm grid.
The Frami hinged corners are for all

off-90 corners, oblique or obtuse.
Anchors
Foundation anchors
The Frami anchoring bracket raises

the top anchor above the panel,
so the concrete can be floated up
easily.
Foundation-anchor system consisting of flat tie-rod and foundation

clamp for wall thicknesses from
10 to 80 cm in a 5 cm grid without
anchoring through the concrete and no wooden spreaders needed.
T-joins
The Frami adjustable clamp has a

clamping range of 15 cm and is a
precision fit in the panel grid.
In many instances, a single closure
per wall is all that is necessary.
Foundation clamp and perforated

strip with a 5 cm grid locate the
bottom edge of the panel.
Joins for wall thicknesses of 20 and

30 cm are easy to form with the
Frami inside corner.
The Frami panels combine effortlessly, both upright and on their sides. The panel connectors
fit anywhere - no mandatory points of attachment..
65
Doka Wall System

[kg]
Article n
37.0
31.9
28.4
22.8
18.8
43.3
39.7
35.0
28.2
23.0
588401000
588447000
588463000
588404000
588405000
588406000
588448000
588464000
588409000
588410000
[kg]
Article n
Doka Wall
Framed
formwork
SystemFrami
Frami panel 0.90x1.20m

Frami-Rahmenelement
Frami outside corner 1.20m

11.0 588459000
12.9 588460000
Frami-Auenecke
Galvanised
Galvanised
Overall depth: 9 cm
Frami hinged inside corner I 1.20m

Frami-Scharnierecke I
33.5 588425000
40.0 588426000
Powder-coated, blue
Frami universal panel 0.75x1.20m

Frami-Universalelement
36.8 588402000
46.6 588407000
Galvanised
Overall depth: 9 cm
Frami hinged outside corner A 1.20m

Frami-Scharnierecke A
12.8 588429000
15.9 588430000
Powder-coated, blue
Frami anchoring panel 0.60x1.50m

Frami anchoring panel 0.60x1.20m
Frami-Ankerelement
37.8 588408000
32.1 588403000
Galvanised
Corners marked in green
Overall depth: 9 cm
Frami circular forming plate 0.20x1.50m

Frami-Bogenblech
21.5 588486000
22.5 588487000
23.5 588488000
Powder-coated, blue
Frami inside corner 1.20m 20cm

Frami-Innenecke
Galvanised
25.3 588471000
30.7 588472000
Frami anchor waling 0.40m
4.4 588489000
Frami-Ankerriegel 0,40m
Painted blue
66

[kg]
Frami closure plate 15 1.20m
Frami-Ausgleichsblech
Article n
9.7 588467000
12.1 588468000
[kg]
Frami wedge clamp
Article n
1.1 588441000
Frami-Klemme
Galvanised
Length: 16 cm
Powder-coated, blue
Width: 21 cm
Frami universal fixing bolt 5-12cm

Frami-Universalverbinder 5-12cm
0.43 588479000
Galvanised
Length: 23 cm
Frami fitting timber 2x9cm 1.50m

Frami-Passholz
1.2
1.9
3.0
6.0
176032000
176033000
176034000
176035000
Frami profile connector 5-18cm

Frami-Profilverbinder 5-18cm
0.80 588493000
Galvanised
Length: 33 cm
Varnished yellow
Height: 150 cm
Frami corner connector
0.40 588446000
Frami-Eckverbinder
Galvanised
Length: 19 cm
Frami plywood support 21mm

Frami-Schalhautwinkel
2.1 588474000
2.0 588473000
Frami clamp
Frami plumbing strut 260
13.9 588437000
Frami-Justiersttze 260
Galvanised
Length: 11 cm
Frami aligning clamp
7.5 588438000
Galvanised
Width: 15 cm
Height: 21 cm
Max. load: 500 kg
1.2 588433000
Frami-Spanner
Frami lifting hook

Frami-Umsetzbgel
Galvanised
Height: 56 cm
Galvanised
3.2 588435000
Frami-Richtspanner
Galvanised
Length: 62 cm
24.0 580365000
14.2 588247000

consisting of:
Frami adjustable clamp
3.6 588436000
Frami-Ausgleichsspanner
Galvanised
Length: 40 cm
of fracture!
Frami universal waling 0.70m

Frami-Klemmschiene
3.7 588439000
6.4 588440000
Galvanised
7.2 588248000
Length: 80 - 130 cm
(C) Prop shoe
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
Galvanised
Painted blue
A
67
Doka Wall System

[kg]
Strut head for Frami plumbing strut 260
Strebenkopf f. Frami-Justiersttze 260

Galvanised
Width: 9 cm
Height: 14 cm
Article n
1.4 508437002
[kg]
Handrail post 1.00m
Article n
3.8 584335000
Gelnder 1,00m
Galvanised
Length: 124 cm
3.7 582768000
Galvanised
Length: 75.5 cm

0.31 588631000
Galvanised
Length: 18 cm

Gerstrohr 48,3mm
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Galvanised
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised
Diameter: 1.6 cm
Frami bracket 60

Galvanised
Height: 7 cm
7.7 588442000
Frami-Konsole 60
0.27 584375000
Gerstrohranschluss
Galvanised
Length: 98 cm
Height: 157 cm
0.84 682002000
Galvanised
Width-across: 22 mm
Frami frame hole plug
0.002 588444000
Frami-Ankerstopfen
Handrail clamp S
Brown
Diameter: 2.5 cm
11.5 580470000
Galvanised
Frami plug
0.003 588445000
Frami-Abdeckstopfen
Brown
Diameter: 2 cm

0.38 588170000
Frami adjustment frame

Frami-Standkonsole
14.3 588451000
Galvanised
Length: 103 cm
Height: 94 - 143 cm
68
Frami anchoring bracket
0.58 588453000
Frami-Ankerhaltewinkel
Galvanised

[kg]
Frami flat tie-rod 10-80cm
Article n
2.1 588475000
Frami-Flachanker 10-80cm
[kg]
Frami pallet 1.50m
74.0 588476000
Frami-Palette 1,50m
Galvanised
Length: 97 cm
Frami clip
Article n
Galvanised
Length: 168 cm
Width: 100 cm
Height: 114 cm
Max. load: 800 kg
0.26 588434000
Frami-Stecker
Galvanised
Width: 3 cm
Height: 12 cm
Frami foundation clamp
Doka accessory box
106.4 583010000
Doka-Kleinteilebox

Length: 154 cm
Width: 83 cm
Height: 77 cm
Max. load: 1000 kg
1.6 588452000
Frami-Fundamentspanner
Galvanised
Height: 9 cm

17.0 588206000

system used.
Bolt-on castor set
33.5 586154000
Anklemm-Radsatz
consisting of:

2 pcs.
Height: 23 cm

Supporting construction
10.7 588477000
Absttzwinkel
Galvanised
Length: 66 cm
Width: 37 cm
Height: 91 cm
2 pcs.
Height: 32 cm
Painted blue
Max. load: 1100 kg
Access system XS
15.0 588620000
20.8 588662000
Galvanised
Width: 89 cm
Height: 63 cm

33.2 588640000
Galvanised
Frami pallet 1.20m

Frami-Palette 1,20m
68.0 588478000
Galvanised
Length: 138 cm
Width: 100 cm
Height: 114 cm
Max. load: 800 kg
69
Doka Wall System

[kg]
Article n
19.1 588641000
Galvanised
Securing barrier XS
4.9 588669000
Galvanised
Length: 80 cm

16.5 588643000
10.5 588670000
Rckenschutz XS
Galvanised
Ladder cage exit XS
17.0 588666000
Galvanised
Height: 132 cm
70
[kg]
Article n

Doka Wall System
Framed formwork
Frami 270 | Frami 300
Frami 270 I Frami 300 is a complete system
for full floor-to-ceiling-height formwork:
walls, columns and foundations. Easily
managed by hand, it is strong enough to
be used as crane-lift formwork.
Residential project 42 Laksos
Trsashz/rs, Hungary
Construction work by: Tarna Invest Kft.,
Budapest
Framed formwork Frami 270 | Frami 300
The crane-independent wall formwork

for storey heights of 2.70 or 3.00 m
The Doka framed formwork Frami 270 I Frami 300 is a full-height,
complete system with high-end safety and working accessories for
foundations, walls and columns.
Extremely stable design ...

with torsion-resistant hollow steel sections
for speedy forming without extra bracing
with high-grade hot-dip galvanisation for durability
produces smooth concrete faces on account of the strong formwork panels
i 270shm
a
r
F ible fre
re
iss
Perm te pressu
e
r
g
c
n
n
i
co
pour
up to of 2.70 m
s
t
2
heigh
/m
N
67,5 k
light, handy panels are easy to install by hand ...

for economical formwork installation and removal even without crane
assistance
light, handy panels are easy to install by hand

reduces the number of cost-intensive closures
i 300
Frasmsible freshr-e
i
Perm ete pressu
r
c
ng
n
co
pouri
up to of 3.00 m
ts
2
heigh
/m
60 kN
Practical accessories save forming time ...

with self-aligning, quick-action panel connectors
with wide choice of anchor options
73
Doka Wall System
The Frami 270 I Frami 300 system

450
600
750
900
2700
Anchors
2700
The robust design and asymmetric

arrangement of the anchors enable
Frami 270 to take the full hydrostatic
pressure of the concrete up to a
pouring height of 2.70 m.
74
385
1115
1300
450
The circular forming plate extends

the usability of the panels to include
polygonal curves: An economical
way of rounding things off.
3000
1115
920
385
Circular formwork
Frami 270 | Frami 300

270 and Frami 300 are separate
systems, one optimised for wall
heights of 2.70 m and the other for
heights of 3.00 m. Each system
has a system grid of 15 cm for
optimum adaptation to the
planned structure.
Universal panel 75 cm wide with
perforations rail for outside
corners and columns.
Low weight for speedy
repositioning, even without a
heavy-duty crane
3000
300
Frami 300 needs only 3 anchors over

the entire vertical reach to make up
a pouring height of 3.00 m.
Working with Frami 270 | Frami 300

Corners
End formwork
Closures
max. 15 cm
The Frami universal panel is ideal

for forming right-angled corners
with wall thicknesses up to 45 cm
in a 5 cm grid.
The 5 cm hole grid of the extremely

versatile universal panels is the key
to economical end formwork for
walls up to 55 cm thick.
The Frami adjustable clamp has a

clamping range of 15 cm and is a
precision fit in the panel grid. In
many instances, a single closure
per wall is all that is necessary.
Walls
Columns
Foundations
Casting walls in full floor-to-ceiling height

of 2.70 m or 3.00 m in one piece - that's
economy. The extensive range of
accessories also ensures safety when the
concrete is being poured.
The special hole grid means that the 75 cm

wide Frami 270 I Frami 300 universal panels
are ideal for economical forming of
columns up to 65 x 65 cm in a 5 cm grid.
Frami 270 and Frami 300 are both

particularly good for casting strip
foundations.
75
Doka Wall System

[kg]
Article n
75.0
66.4
57.8
48.0
39.0
43.3
39.7
35.0
28.2
23.0
37.0
31.9
28.4
22.8
18.8
588481000
588449000
588465000
588482000
588483000
588406000
588448000
588464000
588409000
588410000
588401000
588447000
588463000
588404000
588405000
[kg]
Article n
Doka Wall
Framed
formwork
SystemFrami 270 | Frami 300

Frami-Rahmenelement

Frami-Innenecke
51.6 588485000
30.7 588472000
25.3 588471000
Galvanised
Galvanised
Overall depth: 9 cm

23.8 588461000
12.9 588460000
11.0 588459000
Frami-Auenecke
Galvanised

80.8 588484000
46.6 588407000
36.8 588402000
Galvanised
Overall depth: 9 cm

Frami-Scharnierecke I
33.5 588425000
40.0 588426000
Powder-coated, blue

Frami-Scharnierecke A
Powder-coated, blue
76
12.8 588429000
15.9 588430000

[kg]
Frami-Bogenblech
Article n
21.5 588486000
22.5 588487000
23.5 588488000
Powder-coated, blue
[kg]
Frami profile adaptor for Stripping corner I
Frami-Profiladapter fr Ausschalecke I
Galvanised
Height: 8 cm
Frami panel shoe
Article n
0.60 588491000
1.3 588490000
Frami-Elementschuh
Galvanised
Length: 16 cm
Frami anchor waling 0.40m
4.4 588489000
Frami-Ankerriegel 0,40m

Frami-Ausgleichsblech
Frami clamp
1.2 588433000
Frami-Spanner
Painted blue
Galvanised
Length: 11 cm
9.7 588467000
12.1 588468000
Frami aligning clamp
3.2 588435000
Frami-Richtspanner
Galvanised
Length: 62 cm
Powder-coated, blue
Width: 21 cm
Frami adjustable clamp
3.6 588436000
Frami-Ausgleichsspanner

Frami-Passholz
12.3
6.1
3.7
2.5
6.0
3.0
1.9
1.2
176083000
176082000
176081000
176080000
176035000
176034000
176033000
176032000
Galvanised
Length: 40 cm
of fracture!

Frami-Klemmschiene
3.7 588439000
6.4 588440000
Painted blue
Varnished yellow
Frami wedge clamp
1.1 588441000
Frami-Klemme
Galvanised
Length: 16 cm

Frami-Schalhautwinkel
2.1 588474000
2.0 588473000
Frami universal fixing bolt 5-12cm
Galvanised
Height: 56 cm
Frami-Universalverbinder 5-12cm
Galvanised
Length: 23 cm
Frami profile connector 5-18cm

Frami-Profilverbinder 5-18cm
Frami tie-adapter for Stripping corner I
Frami-Ankeradapter fr Ausschalecke I
Galvanised
Height: 11 cm
0.43 588479000
0.80 588493000
Galvanised
Length: 33 cm
0.47 588492000
Frami corner connector
0.40 588446000
Frami-Eckverbinder
Galvanised
Length: 19 cm
77
Doka Wall System

[kg]
Frami lifting hook
Article n
7.5 588438000
Frami-Umsetzbgel
Galvanised
Width: 15 cm
Height: 21 cm
Max. load: 500 kg
Frami plumbing strut 260
13.9 588437000
Frami-Justiersttze 260
Galvanised
[kg]
Article n
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementsttze 340
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
14.2 588247000
Galvanised
7.2 588248000
Length: 80 - 130 cm
Galvanised
24.0 580365000
14.2 588247000

consisting of:
Galvanised
7.2 588248000
Length: 80 - 130 cm
(C) Prop shoe
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
3.7 582768000
Galvanised
Length: 75.5 cm
Galvanised
Galvanised
Length: 18 cm
Strut head for Frami plumbing strut 260
Strebenkopf f. Frami-Justiersttze 260

Galvanised
Width: 9 cm
Height: 14 cm
0.31 588631000
1.4 508437002
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised
Diameter: 1.6 cm
Frami bracket 60
Frami-Konsole 60
7.7 588442000
Galvanised
Length: 98 cm
Height: 157 cm
78

[kg]
Handrail clamp S
Article n
11.5 580470000
[kg]
Frami plug
0.003 588445000
Frami-Abdeckstopfen
Galvanised
Article n
Brown
Diameter: 2 cm

0.38 588170000
Frami anchoring bracket

Frami adjustment frame
14.3 588451000
Frami-Standkonsole
Galvanised
Length: 103 cm
Height: 94 - 143 cm
Handrail post 1.00m
Galvanised
Frami flat tie-rod 10-80cm
2.1 588475000
Frami-Flachanker 10-80cm
Galvanised
Length: 97 cm
3.8 584335000
Gelnder 1,00m
0.58 588453000
Frami-Ankerhaltewinkel
Galvanised
Length: 124 cm
Frami clip
0.26 588434000
Frami-Stecker
Galvanised
Width: 3 cm
Height: 12 cm

Gerstrohr 48,3mm
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Frami foundation clamp
1.6 588452000
Frami-Fundamentspanner
Galvanised
Height: 9 cm


system used.
Galvanised
0.27 584375000
Gerstrohranschluss
10.7 588477000
Absttzwinkel
Galvanised
Length: 66 cm
Width: 37 cm
Height: 91 cm
Galvanised
Height: 7 cm
17.0 588206000
0.84 682002000
Galvanised
Width-across: 22 mm
Frami frame hole plug

0.002 588444000
Frami-Ankerstopfen
15.0 588620000
Brown
Diameter: 2.5 cm
79
Doka Wall System

[kg]
Article n
10.5 586231000
Green
Max. load: 2000 kg
the strap itself!
Frami pallet 1.20m
[kg]
Article n
Access system XS
20.8 588662000
Galvanised
Width: 89 cm
Height: 63 cm
68.0 588478000
Frami-Palette 1,20m
Galvanised
Length: 138 cm
Width: 100 cm
Height: 114 cm
Max. load: 800 kg
Frami pallet 1.50m
33.2 588640000
Galvanised
74.0 588476000
Frami-Palette 1,50m
Galvanised
Length: 168 cm
Width: 100 cm
Height: 114 cm
Max. load: 800 kg
19.1 588641000
Alu-Framax pallet
126.7 588396000
Alu-Framax-Palette
Galvanised
Galvanised
Length: 280 cm
Width: 110 cm
Height: 107 cm
Max. load: 1200 kg
Doka accessory box
106.4 583010000
Doka-Kleinteilebox

Length: 154 cm
Width: 83 cm
Height: 77 cm
Max. load: 1000 kg
Securing barrier XS
4.9 588669000
Galvanised
Length: 80 cm

16.5 588643000
10.5 588670000
Rckenschutz XS
Galvanised
Bolt-on castor set
33.5 586154000
Anklemm-Radsatz
consisting of:

2 pcs.
Height: 23 cm

2 pcs.
Height: 32 cm
80
Painted blue
Max. load: 1100 kg

[kg]
Ladder cage exit XS
Article n
17.0 588666000
[kg]
Frami-Innenecke
Galvanised
Height: 132 cm
Article n
57.4 588417000
30.7 588472000
Galvanised
Framed formwork Frami 300

84.7
74.6
64.2
52.8
43.5
43.3
39.7
35.0
28.2
23.0
Frami-Rahmenelement
588411000
588412000
588413000
588414000
588415000
588406000
588448000
588464000
588409000
588410000

25.0 588418000
12.9 588460000
Frami-Auenecke
Galvanised
Galvanised
Overall depth: 9 cm

90.9 588416000
46.6 588407000

Galvanised
Overall depth: 9 cm
81
Doka Wall System
Large-area formwork
Top 50
Requirements come in all shapes and
sizes, and Top 50 meets them all.
Even conical, rounded and irregular
structures in fair-faced concrete
quality are no problem. This photo, for
example, shows the Phaeno Science
Center, Wolfsburg.
Phaeno Science Center
Wolfsburg, Germany
E. Heitkamp GmbH, Hamburg office
Architects: Architects' joint venture
Science Center Wolfsburg, Zaha Hadid
Ltd., London & Mayer Bhrle Freie
Architekten BDA, Lrrach
The large-area formwork

for all shapes and sizes
The large-area formwork Top 50 is made-to-measure formwork from
a modular system for an astonishingly wide range of applications.
Shape, size, anchor pattern and sheeting of the panels adapt to suit
any set of requirements.
Only three system components ...

combine to shape even the most unusual geometries
can produce any concrete surface finish
can be dimensioned to any concrete pressure
Optimum adaptation to any set of requirements ...

simple, speedy and therefore economical building
freely selectable anchor pattern and panel grid to meet any architectural
requirements
Preassembly by the Doka Ready-to-use service ...

ensures outstanding quality of the panels
ensures precision joins between the panels and a first-class join
pattern in the finished concrete
ensures that time and space will be saved on your site
ensures perfect fit of the panels without rework
special solutions for bridges, tunnels and industrial construction projects
Safeguarded walkways for maximum safety ...

straightforward combination with the ladder system XS and pouring
platform U
Whenever fair-faced concrete has to meet

the highest requirements, the large-area
formwork Top 50 is always the way to
achieve best results.
83
Doka Wall System
The Top 50 system

Top 50 in detail
The planners place the Doka formwork beams H 20 (1) and the bracing, which
consists of steel waling (2) to suit the anticipated load. The sheeting (3) is
freely selectable your choice of smooth fair-faced concrete, wood-textured
surface, and so on.
1
2
Formwork by our Ready-to-use service

The individual components of the Top 50 join quickly with easy-to-handle
connectors to form finished assemblies: You save on the costs of on-site
assembly. Preassembly by our Ready-to-use service ensures the outstanding quality of the assemblies, with precision joins and a first-class
join pattern in the finished concrete.
No matter how complicated the geometry.
The large-area formwork Top 50 is particularly suitable for high usage
cycles.
84
Taking versatility into new dimensions:

Top 50 panels can be planned up to 6 m
wide and an enormous 12 m high.
Fair-faced concrete
Large-area formwork Top 50 offers a free choice of sheeting plus
adaptability to any structural geometry, so it is ideal for all projects
in which the surface of the concrete must comply with particularly
high requirements (fair-faced concrete).
Science Center, Germany
Hajos Swimming Pool, Hungary
Lakeside Pool, Kaltern/Caldaro, Italy
Hungerburgbahn funicular railway, Austria
85
Doka Wall System
References
And even when the finished concrete surfaces have to meet

exceptional requirements, the large-area formwork Top 50 is the
first choice.
The large-area formwork Top 50 is just as economical for conventional structures and high numbers of re-uses. The extensive range of
accessories also ensures safety when the concrete is being poured.
The modular system of the large-area formwork Top 50 opens up all possible areas of application, including cantilever formwork for bridge
supporting structures with changing cross-sections.
86
High degree of adaptability: Even undulating decks can be cast economically with Doka large-area formwork Top 50.
Even complex structures can be formed with no more than a small

number of standard components. The combination with climbing
formwork MF or SKE is an integral part of the system - ideal for
highly economical solutions.
Made-to-measure solutions with gang-forms enhance materials
utilisation, reduce repositioning and setup times, and, in the final
analysis, help minimise overall formwork costs.
87
Doka Wall System

[kg]
Article n
[kg]
10.2
14.9
19.6
24.7
29.7
35.0
38.9
44.2
48.7
54.2
60.2
68.4
79.4
89.1
102.0
112.4
118.0
580001000
580002000
580003000
580004000
580005000
580006000
580007000
580008000
580009000
580010000
580011000
580012000
580013000
580014000
580015000
580016000
580017000
Corner waling 20
580018000
580019000
580020000
580021000
580022000
580023000
580024000
580025000
580026000
Angular waling WS10 Top50 .....m
Article n
Doka Wall System

Large-area
formwork Top 50
Multi-purpose waling WS10 Top50 0.50m

Mehrzweckriegel WS10 Top50
Painted blue
Leg length: 52 cm
Shaft corner waling WS10 Top50 .....m

Eckwandriegel WS10 Top50 .....m
Mehrzweckriegel WU12 Top50
25.3
32.0
37.5
44.2
50.0
63.1
75.7
90.7
103.4
Painted blue
Space between flange profiles: 5.3
cm
Moment of inertia: 728.0 cm4
Section modulus: 121.4 cm3
Steel waling WS10 Top50 0.50m

Stahlwandriegel WS10 Top50
10.4
15.4
20.2
25.0
30.3
35.8
40.2
46.1
51.0
56.1
60.4
71.5
82.1
92.2
102.0
112.4
122.2
Stahlwandriegel WU12 Top50
25.3
31.6
37.9
44.2
50.5
63.1
75.7
88.4
Painted blue
cm
88
21.5 580068000
Painted blue
cm
Project-specific!
Also available in profiles of thickness
U120 (Order designation: WU12).
1.0 580135000
Flanschklammer H20
Galvanised
Width: 13 cm
Width-across: 19 mm
Flange clamp G
1.1 580120000
Flanschklammer G
Galvanised
Width: 13 cm
Width-across: 19 mm
Flange claw
Painted blue
cm
Steel waling WU12 Top50 1.00m

Winkelriegel WS10 Top50 .....m
Flange clamp H20
580038000
580039000
580040000
580041000
580042000
580043000
580044000
580045000
580046000
580047000
580048000
580050000
580052000
580054000
580056000
580058000
580060000
20.5 580069000
Painted blue
cm
Project-specific!
Also available in profiles of thickness
U120 (Order designation: WU12).
Painted blue
cm
Multi-purpose waling WU12 Top50 1.00m

23.5 580031000
Eckriegel 20
1.0 580137000
Flanschkralle
Galvanised
Width: 17 cm
Width-across: 19 mm
580085000
580086000
580087000
580088000
580089000
580091000
580092000
580093000
Waling clamp H20
0.22 580114000
Riegelklammer H20
Galvanised
Width: 8 cm
Width-across: 13 mm
Beam screw S 8/60
0.06 580116000
Riegelverschraubung S 8/60
Galvanised
Length: 7 cm
Width-across: 13 mm

[kg]
Beam screw H 8/70
Article n
0.06 580117000
Riegelverschraubung H 8/70
[kg]
Beam clamp Top50
Fastening plate
1.2 580081000
Trgerklammer Top50
Galvanised
Length: 8 cm
Width-across: 13 mm
Article n
Painted blue
Height: 15 cm
2.7 580110000
Anschraublasche
Anchoring plate FF20/50
Painted blue
Width: 13 cm
Height: 15 cm
Protective cap H20
6.6 587531000
Ankerungslasche FF20/50
Painted blue
Length: 55 cm
0.36 587248000
Stirnschuh H20
Half splice plate
Galvanised
Length: 20 cm
Width: 7 cm
Lifting bracket
5.5 580267000
Halblasche
Painted blue
Length: 78 cm
6.2 580460000
Kranse
Galvanised
Height: 59 cm
Max. load: 1300 kg
Angle of inclination for slinging
chains: min. 30. Pressure bracing,
with a plank, is essential.
Splice plate Top50 Z
Splice plate with join adjustment
Verbindungslasche mit Fugenjustierung

Painted blue
Length: 76 cm
13.8 580215000
9.0 580074000
Verbindungslasche Top50 Z
Offset plate FF20
Painted blue
Length: 76 cm
Formwork element connector FF20/50

Elementverbinder FF20/50
Painted blue
Length: 35 cm
Width: 18 cm
Height: 4 cm
6.3 587530000
Internal angle plate H20 Top50

Innenecklasche H20 Top50
Elementverbinder FF20/50 Z
6.0 587533000
Shaft waling squaring plate
Painted blue
Length: 55 cm
Adjustable waling extension 1.40m Top50

Ausgleichslasche 1,40m Top50
11.3 580035000
Painted blue
Length: 80 cm
Width: 38 cm
Painted blue
Length: 55 cm
Formwork element connector FF20/50 Z
6.2 587534000
Versatzlasche FF20
9.6 580262000
Verschiebelasche
Painted blue
Leg length: 60 cm
15.0 580075000
Painted blue
Transition plate 18mm

Transition plate 21mm
16.0 588654000
15.8 588656000
bergangslasche
Painted blue
Length: 54 cm
Width: 30 cm
Height: 51 cm
Adjustable waling extension FF20/50

Ausgleichslasche FF20/50
9.1 587532000
Painted blue
Length: 87 cm
89
Doka Wall System

[kg]
Corner spindle
Article n
17.5 580264000
Eckspindel
[kg]
Connecting pin 25cm
Corner connecting plate 90/50

Winkellasche 90/50
0.58 580202000
Verbindungsbolzen 25cm
Galvanised
Length: 65 cm
Height: 31 cm
Galvanised
Length: 25 cm
13.8 580603000
Spring cotter 6mm
0.06 580204000
Federvorstecker 6mm
Painted blue
Length: 51 cm
Width: 40 cm
Galvanised
Length: 13 cm
Stacking plate H20
8.3 580310000
Aufstocklasche H20
Universal angle tie bracket
Galvanised
Length: 68.8 cm
4.4 580604000
Universal-Winkelspanner
Article n
Painted blue
Length: 20 cm
Inside corner plate 3.00m

Inside corner plate 4.00m
53.0 580282000
69.0 580284000
Eckschiene
Angle tie bracket 20,0 SL-1 WU16

Winkelspanner 20,0 SL-1 WU16
Powder-coated, blue
of fracture!
8.5 587543000
Painted blue
Length: 24 cm
Lifting bracket for column formwork

Kranse fr Sttzenschalung
65.0 580607000
Length: 85 cm
Width: 85 cm
Max. load: 2500 kg
Joint plate 3.00m

Joint plate 4.00m
Articulated conn. plate A Top50 ..... degrees
Gelenklasche A Top50 ..... Grad
20.0 580208000
Ausgleichsschiene
Powder-coated, blue
of fracture!
Galvanised
Leg length: 36 cm
Swivel joint plate
36.8 580332000
51.2 580334000
20.0 587542000
Drehgelenklasche
Galvanised
Length: 155 cm
Connecting pin 10cm
0.34 580201000
Galvanised
Length: 14 cm
90
T ledge 21/42 2.00m
0.34 580196000
T-Leiste 21/42 2,00m
Grey

[kg]
Article n
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementsttze 340
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe
Eurex 60 550
Eurex 60 550

2.1 588245000
42.5 582658000
14.2 588247000
7.2 588248000
Length: 80 - 130 cm
Galvanised
18.0 582651000
Powder-coated, blue
Aluminium
Length: 250 cm
(C) Prop head
Galvanised
Article n
Powder-coated, blue
Aluminium
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
[kg]
3.5 588244000
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
8.6 582652000
Aluminium
Length: 100 cm
Diameter: 12.8 cm
8.5 582660000
Galvanised
Length: 31 cm
Width: 12 cm
Height: 33 cm
29.0 582659000
Galvanised

Panel strut 540
49.0 588249000
(A) Prop head
3.5 588244000
Elementsttze 540
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe
3.9 582657000
Galvanised
Length: 15 cm
Width: 15 cm
Height: 30 cm
C

2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
29.6 588250000
Galvanised
10.6 588251000

Galvanised
C
Prop head Eurex 60 Top50
7.1 582665000
Sttzenkopf Eurex 60 Top50
Galvanised
Height: 50 cm
3.7 582768000
Galvanised
Length: 75.5 cm
91
Doka Wall System

[kg]
Article n
0.31 588631000
Galvanised
Length: 18 cm
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm

Gerstrohr 48,3mm
Article n
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Galvanised
Galvanised
Diameter: 1.6 cm
Top scaffold bracket L
[kg]
12.0 587153000
Betonierkonsole L
Painted blue
Length: 101 cm
Height: 159 cm
0.84 682002000
Galvanised
Width-across: 22 mm
127.5 588377000
Universal bracket 60
14.0 580477000
Universal-Konsole 60
Galvanised
Length: 86 cm
Height: 181 cm
Top50 adapter for Framax pouring platform U
18.5 588384000
Xsafe adapter WS10 Top50
15.5 587740000
Top50-Adapter fr Framax-Betonierbhne U
Galvanised
Width: 75 cm
Height: 134 cm
30.4 580476000
Galvanised
Length: 121 cm
Height: 235 cm
Xsafe-Adapter WS10 Top50
Galvanised
Height: 138 cm
Universal railing shackle
3.0 580478000
Universal-Gelnderbgel
Galvanised
Height: 20 cm
0.27 584375000
Gerstrohranschluss
Galvanised
Height: 7 cm
92

[kg]
Handrail clamp S
Article n
11.5 580470000
[kg]
Spindle strut T6 100/150cm

12.5 584323000
Spindelstrebe T6 100/150cm
Galvanised
Article n
Galvanised
29.1 580488000
Galvanised
Height: 112 cm
21.6
26.2
29.4
35.0
Spindelstrebe T7
584324000
584325000
584326000
584327000
Powder-coated, blue
Handrail post T 1.80m
17.7 584373000
Einschubgelnder T 1,80m
Galvanised

Spindle strut T10 .....mm
57.5 584328000
16.9 584391000
Spindelstrebe T10
Handrail post 1.50m
Powder-coated, blue
Special struts T10 (over 355 to max.
540 cm) on inquiry.
12.4 582754000
Gelnder 1,50m
Galvanised
Handrail post DF
15.0 586076000
Steckgelnder DF
Galvanised
Height: 142 cm

15.0 588620000
Universal strut T5/5 .....mm
6.5 584311000
Strebe T5/5 .....mm
Painted blue
Weight per linear metre
93
Doka Wall System

[kg]
Universal spindle foot T8
Article n
8.6 584314000
Universal-Spindelfu T8
[kg]
Filler neck GF SCC
Height adjuster for formwork beams
Hhenjustierung fr Schalungstrger
Galvanised
Height: 46 cm
Max. load: 1000 kg
39.0 580217000
GF-Fllstutzen SCC
Painted blue
Galvanised
Height: 30 cm
Galvanised
Length: 66 cm
11.9 580218000

18.0 588127000
Galvanised
Length: 18 cm
Width: 33 cm
Height: 27 cm
Assembly angle Top50
7.4 580082000
Montagelasche Top50
Height adjuster for multi-purpose walings
Hhenjustierung fr Mehrzweckriegel
Galvanised
Height: 45 cm
Max. load: 3000 kg
Article n
Painted blue
Length: 55 cm
Width: 48 cm
10.3 580206000
Strip tensioner B 5.00m
3.5 580394000
Bandzwinge B 5,00m
Galvanised
Suspension head WS10
8.1 580449000
Aufhngekopf WS10
Galvanised
Length: 21 cm
Width: 18 cm
Height: 23 cm
Universal support Top50 .....mm

Tragwerklasche Top50 .....mm
Positioning rail .....m
1.8 580079000
Fhrungsschiene .....m
Painted blue
11.1 584312000
Painted blue
Hole gauge Top50
2.9 580080000
Bohrplatte Top50
Tool box GF
GF-Werkzeugbox
included in scope of supply:
(A) Reversible ratchet 1/2"
Painted blue
Length: 17 cm
Width: 15 cm
Tool: Drill bit (diameter 10 mm)
6.5 580390000
0.73 580580000
Galvanised
Length: 30 cm
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)
(L)
Fork wrench 13/17

Fork wrench 22/24
Fork wrench 30/32
Ring spanner 17/19
Extension 11cm
Extension 22cm
Universal joint coupling
Nut for box spanner 19
Box nut 13
Box nut 24
Box nut 30 1/2"
0.08
0.22
0.80
0.27
0.20
0.31
0.16
0.16
0.06
0.12
0.20
580577000
580587000
580897000
580590000
580581000
580582000
580583000
580598000
580576000
580584000
580575000
Angle connector 9x5cm
0.22 580381000
Winkelverbinder 9x5cm
Galvanised
Rafter plate right
0.09 582521000
Rafter plate left
0.09 582522000

Sparrenpfettenanker
Galvanised
Length: 17 cm
94

[kg]
Doka accessory box
Article n
106.4 583010000
Doka-Kleinteilebox
[kg]
Bolt-on castor set
19.1 588641000

Length: 154 cm
Width: 83 cm
Height: 77 cm
Max. load: 1000 kg
Article n
Galvanised
33.5 586154000
Anklemm-Radsatz
consisting of:
Securing barrier XS
4.9 588669000
Galvanised
Length: 80 cm
2 pcs.
Height: 23 cm

2 pcs.
Height: 32 cm
Painted blue
Max. load: 1100 kg

16.5 588643000
10.5 588670000
Rckenschutz XS
Galvanised
Access system XS
20.8 588662000
Galvanised
Width: 89 cm
Height: 63 cm
Ladder cage exit XS
17.0 588666000
Galvanised
Height: 132 cm
Fixing clamp XS Top50
2.1 588664000
Befestigungsklemme XS Top50
Galvanised
Length: 41 cm
33.2 588640000
Galvanised
95
Doka Wall System
Wall formwork FF 20
The fully assembled standard panels of the FF 20 are

available as special versions with any sheeting - for
a very wide range of fair-faced concrete finishes.
FH (Polytechnic) Hagenberg
Leyrer+Graf, Gmnd
Architects: Berger+Parkkinen
Wall formwork FF 20
The ready-to-go wall formwork for

high-grade fair-faced concrete
The fully assembled standard panels of the Doka wall formwork FF 20
combine the biggest benefit of wooden-beam formwork the absence
of frame impressions in the concrete for example with the grid advantages of framed formwork.
Fully assembled standard panels ...

ensure speedy progress, even when the formwork has to meet high
requirements for fair-faced concrete finish
have a height grid to meet the requirements of building sites
have stacking rails for easy stacking without extra parts
are rentable, so they are economical even for a low number of use cycles
can be combined with any sheeting to satisfy any requirement for
fair-faced concrete
reshible f ure
s
s
i
m
ss
Per
te pre
e
r
c
n
2
co
/m
50 kN
25 cm grid with only a few panel widths ...

ensures most efficient utilisation of the formwork
reduces quantities in stock and costs for rental, because adaptation to any
structure is straightforward
Practical panel joining ...

with integrated, self-centring stacking rails for fast, dependable stacking
with special FF 20 formwork connectors for high-tensile-strength,
slip-proof joins
Safeguarded walkways for maximum safety ...

Straightforward combination with the ladder system XS and pouring
platform U
The practical panel grid, speedy stacking,

and slip-proof formwork connectors make
the FF 20 the right choice for many projects
that call for first-class fair-faced concreting.
97
Doka Wall System
The FF 20 system
FF 20
1000
2750
3750
Matching panel formats for best

possible utilisation of formwork
widths and 3 panel heights simplifies planning, shuttering and logistics on the construction site
Transverse waling across the
entire width of the panels for easy
installation of accessories
without mandatory points of
attachment
Standard sheeting with three-ply
sheets, special sheeting can be
fitted at any time
500
750
1000
2000
650 cm
(375 cm + 275 cm)
Height grid
FF 20 basic panels used in combination
with stacking elements permit practical
formwork heights up to 5.50 m.
Panels 2.75 m high are symmetrical
and can also be used on the flat.
550 cm
(275 cm + 275 cm)
425 cm
(275 cm + 100 cm + 50 cm)
375 cm
325 cm
(275 cm + 50 cm)
275 cm
The new FF20 large panels are 6.50

m high and ensure speedy progress
when high walls have to be cast, for
example for bridge abutments.
100 cm
98

for more details.
Wall formwork FF 20
Working with FF 20
Fastening bolts FF20 with star grip

nuts centre and join the panels for
non-slip stacking. A catch makes
the star grip nuts easy to tighten.
Stacking / joining panels
The formwork element connector FF20/50Z

effortlessly pulls the formwork elements
FF20 tight, making a high-tensile-strength,
no-slip join.
Corners
Right-angle corners can be set up

easily with the modular elements,
even with different wall thicknesses
up to 60 cm.
FF 20 swivelling corners make

excellent solutions for all off-90
corners.
FF 20 can also be dimensioned for horizontal

use - for casting high-grade fair-faced slabs
and walls in a single operation.
99
Doka Wall System

[kg]
Article n
335.0
166.0
131.0
92.0
190.0
95.0
79.5
58.0
440.0
224.0
172.0
120.0
692.0
346.0
587512000
587508000
587504000
587500000
587523000
587522000
587521000
587520000
587564000
587562000
587561000
587560000
587563000
587565000
[kg]
Article n
Dokaformwork
Wall
Wall System
FF 20
Formwork element FF20 2.00x2.75m 21mm

Fertigelement FF20 21mm
Inside corner FF20 2.75m 21mm

Innenecke FF20 21mm
214.0 587516000
117.0 587525000
Replacement sheathing available on

enquiry
enquiry

Innenecke FF20 27mm
220.0 587608000
120.0 587618000
33.5 587628000

enquiry

Fertigelement FF20 27mm
348.0
173.0
136.0
96.0
195.0
97.5
81.5
59.5
587606000
587604000
587602000
587600000
587616000
587614000
587612000
587610000
Swivelling inside corner FF20 2.75m 21mm

Gelenkinnenecke FF20 21mm
246.5 587577000
103.0 587575000
53.7 587573000

enquiry
enquiry

Gelenkinnenecke FF20 27mm
Stacking element FF20 2.00x0.50m 21mm

Aufstockelement FF20 21mm
90.5
45.4
36.4
27.5
587529000
587528000
587527000
587526000
67.5
33.4
28.8
21.0
587626000
587624000
587622000
587620000
55.0 587647000
108.8 587649000
255.0 587651000

enquiry

Aufstockelement FF20 27mm
100
Swivelling outside corner FF20 2.75m 21mm

Gelenkauenecke FF20 21mm
Painted blue
102.7 587579000
46.2 587578000
Wall formwork FF 20
[kg]
Gelenkauenecke FF20 27mm
Article n
102.7 587654000
46.2 587653000
[kg]
Article n
6.0 587533000
Painted blue
Length: 55 cm
Painted blue

9.1 587532000
Painted blue
Length: 87 cm
Swivelling outside corner FF20 0.50m

Gelenkauenecke FF20 0,50m
16.1 587652000
Painted blue
Beam clamp Top50
1.2 580081000
Trgerklammer Top50
Painted blue
Height: 15 cm
Filler neck GF SCC
39.0 580217000
GF-Fllstutzen SCC
Galvanised
Length: 66 cm
Anchoring plate FF20/50
6.6 587531000
Ankerungslasche FF20/50
Painted blue
Length: 55 cm

18.0 588127000
Galvanised
Length: 18 cm
Width: 33 cm
Height: 27 cm
Corner plate FF20 G
Splice plate with join adjustment
7.2 587571000
Ecklasche FF20 G
Verbindungslasche mit Fugenjustierung

Painted blue
Length: 76 cm
13.8 580215000
Painted blue
Length: 49 cm
Width: 24 cm
Distribution plate FF20
1.7 580216000
Verteilerplatte FF20
Galvanised
Swivel joint plate
20.0 587542000
Drehgelenklasche
Galvanised
Length: 155 cm
Form tie load dispatcher FF20

Ankerlastverteiler FF20
2.7 587541000
Galvanised
Height: 17 cm
Fastening bolt FF20
0.30 587545000
Spannbolzen FF20
Galvanised
Length: 17 cm
Width-across: 30 mm
Star grip nut 15.0 G
Offset plate FF20

Painted blue
Length: 35 cm
Width: 18 cm
Height: 4 cm
0.47 587544000
Sternmutter 15,0 G
Galvanised
Width: 10 cm
Height: 5 cm
Width-across: 30 mm
Formwork element connector FF20/50

Elementverbinder FF20/50
Painted blue
Length: 55 cm
6.2 587534000
Versatzlasche FF20
Outside angle plate FF20 21mm

Outside angle plate FF20 27mm
6.3 587530000
Auenecklasche FF20
18.6 587535000
18.6 587634000
Painted blue
Leg length: 60 cm
101
Doka Wall System

[kg]
Article n
4.4 580604000
Painted blue
Length: 20 cm
[kg]
Article n
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementsttze 340
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe

Connecting pin 10cm
0.34 580201000
Galvanised
Length: 14 cm
Spring cotter 6mm

7.2 588248000
Length: 80 - 130 cm
Galvanised
Galvanised
Length: 13 cm
Flange clamp H20
14.2 588247000
Galvanised
0.06 580204000
Federvorstecker 6mm
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
1.0 580135000
Flanschklammer H20
Galvanised
Width: 13 cm
Width-across: 19 mm
Stacking angle FF20
7.8 587547000
Aufstockwinkel FF20
Panel strut 540
49.0 588249000
(A) Prop head
3.5 588244000
Elementsttze 540
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
Painted blue
Height: 46 cm
(B) Prop shoe
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm

10.2
14.9
19.6
24.7
29.7
35.0
38.9
44.2
48.7
54.2
60.2
68.4
79.4
89.1
102.0
112.4
118.0
Painted blue
cm
102
580001000
580002000
580003000
580004000
580005000
580006000
580007000
580008000
580009000
580010000
580011000
580012000
580013000
580014000
580015000
580016000
580017000
29.6 588250000
Galvanised
10.6 588251000

Galvanised
Wall formwork FF 20
[kg]
Article n
Eurex 60 550
[kg]
Doka coil 16mm
Eurex 60 550
0.009 588633000
Doka-Coil 16mm
Galvanised
Diameter: 1.6 cm
42.5 582658000
Powder-coated, blue
Aluminium
18.0 582651000
Powder-coated, blue
Aluminium
Length: 250 cm
12.0 587153000
Betonierkonsole L
(C) Prop head
Painted blue
Length: 101 cm
Height: 159 cm
3.5 588244000
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
Article n
8.6 582652000
Aluminium
Length: 100 cm
Diameter: 12.8 cm
8.5 582660000
Galvanised
Length: 31 cm
Width: 12 cm
Height: 33 cm
14.0 580477000
Galvanised
Length: 86 cm
Height: 181 cm
29.0 582659000
Galvanised
3.9 582657000
Galvanised
Length: 15 cm
Width: 15 cm
Height: 30 cm
C

30.4 580476000
Galvanised
Length: 121 cm
Height: 235 cm
3.0 580478000
C
Galvanised
Height: 20 cm
3.7 582768000
Galvanised
Length: 75.5 cm

Gerstrohr 48,3mm

0.31 588631000
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Galvanised
Galvanised
Length: 18 cm
103
Doka Wall System

[kg]
Article n
0.27 584375000
Gerstrohranschluss
[kg]
Handrail post 1.10m
5.6 584384000
Schutzgelnder 1,10m
Galvanised
Height: 7 cm
Article n
Galvanised
Height: 134 cm
0.84 682002000
Galvanised
Width-across: 22 mm

127.5 588377000
Galvanised
Height: 112 cm
17.7 584373000
FF20 adapter for Framax pouring platform U
6.8 588381000
Top50 adapter for Framax pouring platform U
18.5 588384000
FF20-Adapter f. Framax-Betonierbhne U
Galvanised
Length: 34 cm
Top50-Adapter fr Framax-Betonierbhne U
Galvanised
Width: 75 cm
Height: 134 cm
29.1 580488000
Galvanised
15.0 588620000

Handrail clamp S
11.5 580470000
Galvanised
Lifting chain 100cm 15kN
1.8 587548000
Anschlagkette 100cm 15kN
Length: 103 cm
Max. load: 1500 kg
Handrail clamp T
12.3 584381000
Schutzgelnderzwinge T
Galvanised
104

10.5 586231000
Green
Max. load: 2000 kg
the strap itself!
Wall formwork FF 20
[kg]
Lifting bracket
Article n
6.2 580460000
Kranse
[kg]
Height adjuster for multi-purpose walings
Hhenjustierung fr Mehrzweckriegel
Galvanised
Height: 45 cm
Max. load: 3000 kg
Straightening clamp FF20
Galvanised
10.3 580206000
Securing barrier XS
4.9 588669000
Galvanised
Length: 80 cm
22.8 587546000
Richtzwinge FF20
19.1 588641000
Galvanised
Height: 59 cm
Max. load: 1300 kg

16.5 588643000
10.5 588670000
Rckenschutz XS
Galvanised
Width: 43 cm
Height: 69 cm
Galvanised
Access system XS
Ladder cage exit XS

20.8 588662000
Galvanised
Width: 89 cm
Height: 63 cm
Article n
17.0 588666000
Galvanised
Height: 132 cm
2.1 588664000
Galvanised
Length: 41 cm
33.2 588640000
Galvanised
105
Doka Wall System
Circular formwork H 20 produces the perfectly

round walls needed for wastewater treatment
plants, circular ramps in multi-storey car parks,
round containers, and so on. All the
elements are brought fully assembled to the
site and are immediately ready for use as soon as
the spindles have been set for the desired radius.
Sewage treatment plant, Niederselters, Germany
Construction work by: Willi Laube
The circular formwork

for perfect curves
The circular formwork H 20 is the practical choice for smooth,
circular walls and radii of any size greater than 3.50 m universally
adaptable.
Perfectly smooth curves ...

because the formwork sheeting is uniformly supported
because the specially designed spindles enable curvature to be set for any
radius
because the Dokaplex 21mm formwork sheeting is flexible and can
withstand high loads
because special end sections close off the ends of the panels
Preassembled panels with only 2 widths and 5 heights ...

means matching panel formats for best possible utilisation of formwork
are immediately ready for use and can be butt-joined using the adjustable
clamp 10 cm
can be connected with Framax Xlife and Alu-Framax Xlife, and the column
formwork RS
reduce rental costs and labour costs on your construction site
Only 1 anchor every 1.5 m2 ...

means fewer anchors have to be set, so forming work is faster
reduces labour costs for post-casting work with the anchorages
eshble fr ure
i
s
s
i
Perm ete press
r
2
conc
/m
60 kN
Tried-and-tested basic components

from the Doka large-area formwork
Top 50 make the circular formwork
H 20 robust and adaptable.
107
Doka Wall System
The circular formwork H 20 system

2400
2400
700
1200
2400
3000
3600
Only 2 panel widths (inside panel

2.40 m, outside panel 2.50 m) for all
radii down to 3.50 m
Practical height grid with 5 panel
heights
Supplied complete with bending
templates for easy setup
2400
2400
2400
The special end sections effortlessly

combine the system with Framax Xlife and
Alu-Framax Xlife and column formwork RS.
108
Specially designed spindles allow the

circular formwork elements to be precisionradiused to match the bending template.
Working with circular formwork H 20

Radii down to 3.50 m
Each fully preassembled element for inside and outside
formwork can be precision-shaped for any radius down
to 3.50 to match the bending template.
Radii down to 2.50 m

Even tight radii in the range from 3.50 down to 2.50 m
are possible with separate planning.
The circular formwork H 20 adjusts

simply to different radii by means
of the spindles for smooth progress on the construction site.
The practical height grid of the

panels and the systematic
anchor spacing make it
possible to set up formwork
for many different height
combinations.
109
Doka Wall System

[kg]
Article n
195.0
244.0
472.0
523.0
699.0
934.0
587820000
587821000
587822000
587813000
587823000
587824000
[kg]
Article n
Doka Wall
Circular
formwork
SystemH 20
Circular formwork element H20 2.40x0.70m

Rundschalungselement H20 2,40m

Used as inside element
24.0 580365000
14.2 588247000

consisting of:
Galvanised
7.2 588248000
Length: 80 - 130 cm
(C) Prop shoe
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
Galvanised
A

Rundschalungselement H20 2,50m

Used as outside element
197.0
249.0
480.0
534.0
716.0
942.0
587825000
587826000
587827000
587814000
587828000
587829000
42.2 580366000
29.6 588250000

consisting of:
Galvanised

(C) Prop shoe
Stacking plate for circular formwork H20

Aufstocklasche fr Rundschalung H20
Galvanised
Height: 62 cm
10.6 588251000
7.0 587830000
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
Galvanised
A
Adjustable clamp 10cm
3.7 587808000
Ausgleichsspanner 10cm
Galvanised
Length: 30 cm
B
Wrench for circular formwork H20

Schlssel fr Rundschalung H20
0.70 587807000
C
Galvanised
Length: 27 cm
Template f. circular formw. H20 ...../.....mm

Schablone fr Rundschalung H20 ...../.....mm
Weight per m2
Project-specific!
110
6.5 177020000
[kg]
Article n
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementsttze 340
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
[kg]
Article n
Eurex 60 550
Eurex 60 550
42.5 582658000
Powder-coated, blue
Aluminium
(B) Prop shoe
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
(C) Coupler Eurex 60
14.2 588247000
8.6 582652000
Aluminium
Length: 100 cm
Diameter: 12.8 cm
(D) Connector Eurex 60
Galvanised
7.2 588248000
Length: 80 - 130 cm
Galvanised
18.0 582651000
Powder-coated, blue
Aluminium
Length: 250 cm
3.9 582657000
Galvanised
Length: 15 cm
Width: 15 cm
Height: 30 cm
8.5 582660000
Galvanised
Length: 31 cm
Width: 12 cm
Height: 33 cm
29.0 582659000
Galvanised
(G) Fixing unit RD
Panel strut 540
49.0 588249000
(A) Prop head
3.5 588244000
Elementsttze 540
consisting of:
(H) Bolt for prop head D25 110

(I) Linch pin 6x40 galv. DIN 11023
0.45 508244050
0.03
020401

2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe
1.9 587806000
Galvanised
Length: 19 cm
Width: 8 cm
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
29.6 588250000
Galvanised
10.6 588251000

Galvanised
3.7 582768000
Galvanised
Length: 75.5 cm
Fixing unit RD
1.9 587806000
Befestigungseinheit RD
Galvanised
Length: 19 cm
Width: 8 cm

0.31 588631000
Galvanised
Length: 18 cm
111
Doka Wall System

[kg]
Doka coil 16mm
Article n
0.009 588633000
Doka-Coil 16mm
Galvanised
Diameter: 1.6 cm

Framax-Passholz 2,70m
[kg]
Article n
3.1
4.7
7.8
15.5
176020000
176022000
176024000
176026000
Varnished yellow
30.4 580476000
Galvanised
Length: 121 cm
Height: 235 cm
Reversible ratchet 1/2"
0.73 580580000
Umschaltknarre 1/2"
Galvanised
Length: 30 cm
12.0 587153000
Betonierkonsole L
Box nut 24
Painted blue
Length: 101 cm
Height: 159 cm
0.12 580584000
Stecknuss 24
Access system XS

Gerstrohr 48,3mm
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Galvanised
0.27 584375000
Gerstrohranschluss
Galvanised
Height: 7 cm
0.84 682002000
Galvanised
Width-across: 22 mm
112
20.8 588662000
Galvanised
Width: 89 cm
Height: 63 cm
33.2 588640000
Galvanised
[kg]
Article n
[kg]
Article n
19.1 588641000
Galvanised
Securing barrier XS
4.9 588669000
Galvanised
Length: 80 cm

16.5 588643000
10.5 588670000
Rckenschutz XS
Galvanised
Ladder cage exit XS
17.0 588666000
Galvanised
Height: 132 cm
113
Doka Wall System

When the faade formwork Top 50 is used, the slab
edge complete with columns and precast parapet
sections go up first. This makes the follow-up
process of setting up the formwork for the
intermediate floors all the easier and all the faster.
Munich City Tower, Munich, Germany
Joint venture Munich City Tower, Munich
For the safe and economical

forming of precast faades
Faade formwork Top 50 speeds up construction projects with precast
faade elements, regardless of whether the cast-in-place columns are
integrated or recessed.
The faade formwork Top 50 ...

permits structured construction workflows with minimised material input
speeds up progress, particularly with faade-integrated cast-in-place columns
utilises the precasting as end formwork
consists largely of standard components from the large-area formwork Top 50
Maximised safety without additional working and protection

platforms ...
because of the integrable fall barriers with scaffold tube or safety net
because of working in the safety of the floor

because there is no need for additional working platforms and slab-edge
closures
because the precast component is simply inserted into the formwork and
set in concrete with the cast-in-place column
because of preassembly by the Doka Ready-to-Use Service
115
Doka Wall System
The faade formwork system Top 50

Taking the slab edging out of the slab-pouring
cycle and casting it separately in advance
speeds the process up enormously and brings
huge cost savings.
Casting with faade

formwork
The faade formwork Top 50 has a
great deal to offer in the field of
construction with precast faade
elements:

for more details.
Lower material costs, because

only a small number of rentable
faade formwork units are
needed, working in advance of
the floor-formwork crew
Lower labour costs, because
faade and intermediate floors
are separated and the even slab
is easy to form
Less time needed, because
routines are repeated and the
crew soon becomes familiarised
with the workflow
Enhanced safety because of the
integrable fall barriers and
because the crew works from the
safety of the slab
The traditional way:

Casting with tableforms
Complex slab edges mean more
time has to be invested in preparing
and casting the entire slab as a unit.
If precast faades are a prospect, the
faade formwork Top 50 should be
considered as an alternative to
floor-edge tables.
116
Parapet elements integrated into cast-in-place columns
The faade formwork is seated on

the finished precast section and
precision-adjusted by means of
the panel struts.
When the rebars are in place and

with the column formwork closed,
the precasting is lowered into
position, adjusted, and cast along
with the column.
Once the concrete has set the faade

and column formwork is lifted to the
next location, and the level floor is
cast.
Parapet elements integrated into floor slabs
The faade formwork is seated on

the lower-level precast parapet section and precision-adjusted by
means of the panel struts. The recessed columns are cast separately.
Then the formwork is set up and the

concrete poured so that slab and
precasting part are integrated.
Once the concrete has set the faade

formwork is released and lifted to
the next location.
117
Doka Wall System

[kg]
Article n
[kg]
Article n
Doka Wall
Faade
formwork
SystemTop 50
Facade waling WS10 2.50m

Facade waling WU14 6.00m
50.0 580692000
189.2 580691000
Fassadenriegel
Painted blue
cm
Facade precast member clamp H

Fassaden-Fertigteilklemme H
26.2 580693000
Galvanised
Length: 70 cm
Height: 41 cm
Width-across: 50 mm
Facade precast member clamp V

Fassaden-Fertigteilklemme V
Fassaden-Fertigteilklemme O
37.5 580020000

10.4
15.4
20.2
25.0
Mehrzweckriegel WU12 Top50 1,50m

Painted blue
cm
580038000
580039000
580040000
580041000
Painted blue
cm
8.1 580694000
37.9 580087000
Stahlwandriegel WU12 Top50 1,50m

Painted blue
cm
Galvanised
Length: 70 cm
Height: 41 cm
Width-across: 50 mm
Facade precast member clamp O
4.9 580698000
Galvanised
Length: 59 cm
Height: 22 cm
Flange clamp H20
1.0 580135000
Flanschklammer H20
Galvanised
Width: 13 cm
Width-across: 19 mm
Facade waling connector
4.7 580695000
Fassaden-Riegelverbinder
Galvanised
Length: 26 cm
Height: 25 cm
Protective cap H20
0.36 587248000
Stirnschuh H20
Galvanised
Length: 20 cm
Width: 7 cm
Facade anchor socket 15.0
3.5 580696000
Fassaden-Ankermuffe 15,0
Galvanised
Length: 33 cm
Width: 12 cm
Eye-lug tie rod 15.0 w/o tie rod

senanker 15,0 ohne Ankerstab
Lifting bracket
Galvanised
Height: 59 cm
Max. load: 1300 kg
1.3 580649000
Galvanised
Length: 11 cm

10.2
14.9
19.6
24.7
48.7
Painted blue
cm
118
6.2 580460000
Kranse
580001000
580002000
580003000
580004000
580009000

Winkellasche 90/50
Painted blue
Length: 51 cm
Width: 40 cm
13.8 580603000

[kg]
Article n
4.4 580604000
Painted blue
Length: 20 cm
[kg]
Article n
Panel strut 540
49.0 588249000
(A) Prop head
3.5 588244000
Elementsttze 540
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe

Connecting pin 10cm
0.34 580201000
Galvanised
Length: 14 cm
Spring cotter 6mm

10.6 588251000

Galvanised
Galvanised
Length: 13 cm
Facade waling holder
29.6 588250000
Galvanised
0.06 580204000
Federvorstecker 6mm
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
2.3 580674000
Fassaden-Riegelhalter
Galvanised
Length: 31 cm
Facade strut holder
2.0 580675000
Fassaden-Sttzenhalter
Galvanised
Length: 30 cm
Plumbing strut 340 for precast members

Justiersttze 340 fr Fertigteile
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementsttze 340
consisting of:
18.2 588296000
Galvanised
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm

14.2 588247000
Galvanised
7.2 588248000
Length: 80 - 130 cm
33.3 588297000
Galvanised
Galvanised
119
Doka Wall System

[kg]
Plumbing strut 340 with prop head
Justiersttze 340 mit Sttzenkopf
Article n
28.0 580671000
[kg]
14.0 580477000
Galvanised
Galvanised
Length: 86 cm
Height: 181 cm
35.2 580673000
Article n
30.4 580476000
Galvanised
Length: 121 cm
Height: 235 cm
Galvanised
3.0 580478000
Galvanised
Height: 20 cm
3.7 582768000
Galvanised
Length: 75.5 cm

0.31 588631000
Galvanised
Length: 18 cm
Doka coil 16mm
Gerstrohr 48,3mm
0.27 584375000
Gerstrohranschluss
Galvanised
Height: 7 cm
12.0 587153000
Painted blue
Length: 101 cm
Height: 159 cm
120
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Galvanised
Galvanised
Diameter: 1.6 cm
Betonierkonsole L
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
0.009 588633000
Doka-Coil 16mm

Handrail clamp S
11.5 580470000
Galvanised

[kg]
Handrail post 1.10m
Article n
5.6 584384000
Schutzgelnder 1,10m
Galvanised
Height: 134 cm
[kg]
Tool box GF
Article n
6.5 580390000
GF-Werkzeugbox
0.73 580580000
Galvanised
Length: 30 cm
Attachable sleeve 24mm
0.03 584385000
Steckhlse 24mm
Grey
Length: 16.5 cm
Diameter: 2.7 cm
Screw sleeve 20.0
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)
(L)
Fork wrench 13/17

Fork wrench 22/24
Fork wrench 30/32
Ring spanner 17/19
Extension 11cm
Extension 22cm
Box nut 13
Box nut 24
Box nut 30 1/2"
0.08
0.22
0.80
0.27
0.20
0.31
0.16
0.16
0.06
0.12
0.20
580577000
580587000
580897000
580590000
580581000
580582000
580583000
580598000
580576000
580584000
580575000
0.03 584386000
Schraubhlse 20,0
Yellow
Length: 20 cm
Diameter: 3.1 cm

0.84 682002000
0.71 586013000
Anschraubkupplung

Galvanised
Length: 50 cm
Galvanised
Width-across: 22 mm
Box nut 50
Stecknuss 50
Swivel coupler 48mm
1.5 580894000
Umschaltknarre 3/4"
0.81 581449000
1.5 582560000
Drehkupplung 48mm
Galvanised
Width-across: 22 mm
Normal coupler 48mm
1.2 682004000
Normalkupplung 48mm
Galvanised
Width-across: 22 mm
121
Doka Wall System
Column formwork Framax

Xlife, Alu-Framax Xlife
Universal panels from the framed formwork Framax

Xlife are ideal for forming changing column crosssections in a 5 cm grid without extra column
formwork on the construction site.The ladder
system XS affords safe access, the columns platform offers a safe place of work, and the platform
remains installed even when the formwork is repositioned.
BV Europay Headquarters
Swietelsky
Column formwork Framax Xlife, Alu-Framax Xlife
Forming columns with components from the Framax

Xlife modular system
Universal panels from the framed formwork systems
are ideal for forming changing column cross-sections
in a 5 cm grid without extra column formwork on the
construction site.
Universal panels from the framed

formwork systems Framax Xlife ...
permit column cross-sections up to 75 x 75 cm or 105 x 105
cm (Alu-Framax Xlife) in a 5 cm grid without extra column
formwork
are ideal for corners and end formwork - for optimum utilisation of the formwork
reduces quantities in stock and costs for rental, because they
are universally adaptable
can be lifted complete with the column formwork platform
are designed with the strength to withstand extra-high
requirements
consist of hot-dip galvanised and powder-coated frames
and the revolutionary Framax Xlife panel
Doka ladder system XS

Safe ladders with integrated cages are available for
all Doka column formwork. The column formwork
can be fully assembled on the ground, complete
with all safety gear - to ensure safety right from the
beginning. If necessary, the pouring platforms with
ladders and cages can also be retrofitted to column
formwork after it has been erected. The cage modules stack easily for transportation so they take up
less space.
3300
2700
fresh
sible sure
s
i
m
r
res
Pe
rete p
2
conc
/m
90 kN
1350
900
900
1200
Framax universal panels come

in 90 cm and 120 cm widths
and 90 cm, 135 cm, 270 cm
and 330 cm heights.
For more details see the user

information and the section
entitled Working and Protection Platforms.
Pluggable holes in a 5 cm grid in the sheeting make

the universal panels so versatile. The universal fixing
bolts mean that the panels can be set up effortlessly
for column cross-sections up to 105 x 105 cm.
123
Doka Wall System

[kg]
Article n
148.0
79.3
63.0
182.6
588122500
588124500
588120500
588228500
[kg]
Article n
Doka Wall
Column
formwork
SystemFramax Xlife, Alu-Framax Xlife

0.60 588158000
Super plate 15.0
0.91 581966000
Galvanised
Length: 26 cm
Superplatte 15,0

225.8
116.7
91.5
280.0
588601500
588603500
588604500
588671500
Galvanised
Height: 6 cm
Diameter: 12 cm
Width-across: 27 mm
1.6: 120 kN
Breaking load: > rod breaking load (>
195 kN)
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementsttze 340
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
14.2 588247000
Galvanised

Framax-Auenecke
47.0
16.0
23.5
58.0
588126000
588336000
588128000
588227000
Galvanised

Alu-Framax Xlife-Uni-Element
64.2 588322500
33.8 588324500
27.0 588326500
Powder-coated

Galvanised
Length: 20 cm
124
3.3 588153400
7.2 588248000
Length: 80 - 130 cm
Galvanised

[kg]
Article n
Panel strut 540
49.0 588249000
(A) Prop head
3.5 588244000
Elementsttze 540
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe
Eurex 60 550
Eurex 60 550

2.1 588245000
42.5 582658000
3.5 588244000
29.6 588250000
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
10.6 588251000

Galvanised
18.0 582651000
Powder-coated, blue
Aluminium
Length: 250 cm
(C) Prop head
Galvanised
Article n
Powder-coated, blue
Aluminium
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
[kg]
8.6 582652000
Aluminium
Length: 100 cm
Diameter: 12.8 cm
8.5 582660000
Galvanised
Length: 31 cm
Width: 12 cm
Height: 33 cm
29.0 582659000
Galvanised
3.9 582657000
Galvanised
Length: 15 cm
Width: 15 cm
Height: 30 cm
C

3.7 582768000
Galvanised
Length: 75.5 cm

0.31 588631000
Galvanised
Length: 18 cm
125
Doka Wall System

[kg]
Doka coil 16mm
Article n
0.009 588633000
Doka-Coil 16mm
[kg]
Framax lifting chain 4-part 3.20m
Framax-Vierergehnge 3,20m
Galvanised
Diameter: 1.6 cm
Framax bracket 90
Article n
17.0 588230000
Dacromete coated
Max. load: 2360 kg angle of inclination = max. 45
12.5 588167000
Framax-Konsole 90
Galvanised
Width: 103 cm
Height: 185 cm
Framax transport bolt 5kN
1.9 588621000
Framax-Transportbolzen 5kN
Max. load: 500 kg

Framax lifting hook
10.6 588149000
Framax-Umsetzbgel

Gerstrohr 48,3mm
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Galvanised
Height: 22 cm
Max. load: 1000 kg

0.38 588170000
Galvanised

1.9 588129000
Grey
0.27 584375000
Gerstrohranschluss
Galvanised
Height: 7 cm
0.003 588180000
Doka column formwork platform 150/90cm

Doka-Sttzenbhne 150/90cm
Blue
Diameter: 3 cm
211.8 588382000
Galvanised
Length: 173 cm
Width: 173 cm
Height: 130 cm
Framax plug R24.5
0.003 588181000
Yellow
Diameter: 2 cm
Access system XS
Handrail clamp S
11.5 580470000
Galvanised
Length: 115 cm
Galvanised
Connector XS column formwork platform

Anschluss XS Sttzenbhne
Galvanised
Length: 123 cm
126
11.2 588639000
10.0 588637000

[kg]
Article n
[kg]
Article n
33.2 588640000
Galvanised
19.1 588641000
Leiternverlngerung XS 2,30m
Galvanised
Securing barrier XS
4.9 588669000
Galvanised
Length: 80 cm
16.5 588643000
Rckenschutz XS 1,00m
Galvanised
Ladder cage exit XS
17.0 588666000
Galvanised
Height: 132 cm
127
Doka Wall System
Column formwork KS
The KS formwork is the ideal choice when
a large number of columns have to be cast.
The formwork lifts complete with the
pouring platform, and the panels simply
fold closed for erection and open for
stripping to keep forming times and
crane time down to a minimum.
KIKA furniture store, Vienna, Austria
Joint ventureKIKA Wien West
Column formwork KS
The high-speed column formwork

with folding mechanism
The ideal choice when large numbers of columns with varying
cross-sections have to be formed on schedule and economically.
Form square-section and rectangular-section

columns quickly and easily ...
eshble fr ure
i
s
s
i
Perm te press
re
2
conc
/m
90 kN
Repositioning
with the wide range of adjustment from 20 to 60 cm in a 5 cm grid

with fair-faced concrete quality - without changing the sheeting when
cross-sections change and without anchor and frame indentations marking
the finished concrete
by simple assembly on site and shifting wheels for manual shifts to save
on crane time
for column heights up to 6.60 m with a height grid of 30 cm
by simply folding the panels open and closed
with a quick-insertion front triangular ledge - no nailing
The sheeting is fixed from behind,

so it leaves no indentations in the
fair-faced concrete.
The shifting wheel can be used to

move column formwork KS up to
heights of 3.60 m on the flat. Four
shifting wheels KS per column
clamp easily into position and
make for considerable savings
on crane time for horizontal repositioning.
The front triangular ledge slots

easily into position for tight, clean
corners - dispensing completely
with time-consuming nailed fixings.
The new ladder system XS

is available for enhanced site safety with the column
formwork KS. For more information, see Working and
Protection Platforms.
The positioning aid makes the formwork easy to manoeuvre into position with a crowbar for quick,
straightforward positioning.
129
Doka Wall System

[kg]
Article n
[kg]
Article n
Doka Wall
Column
formwork
SystemKS
Panel KS 3.30m
182.0 580346000
Element KS 3,30m
Super plate 15.0
0.91 581966000
Superplatte 15,0
Galvanised
Width: 80 cm
Galvanised
Height: 6 cm
Diameter: 12 cm
Width-across: 27 mm
1.6: 120 kN
195 kN)
Lifting ring
1.4 580340000
Umsetzring
Galvanised
Height: 20 cm
Max. load: 600 kg
Panel KS 2.70m
139.0 580337000
Element KS 2,70m
Galvanised
Width: 80 cm
Stacking screw KS
0.77 580345000
Aufstockschraube KS
Galvanised
Height: 20 cm
Frontal triangular ledge KS 20 4.00m

Frontal triangular ledge KS 15 4.00m
Stirndreikantleiste KS
0.93 580347000
0.71 580359000
Grey
Panel KS 1.20m
64.7 580338000
Element KS 1,20m

Galvanised
Width: 80 cm
24.0 580365000
14.2 588247000

consisting of:
Panel KS 0.90m
56.3 580339000
Element KS 0,90m
Galvanised
Width: 80 cm
Protective plate KS
Galvanised
Galvanised
Length: 70 cm
Width: 9 cm
(C) Prop shoe
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
Galvanised
A
Locking hook KS
0.83 580344000
Verschlusshaken KS
Galvanised
Length: 31 cm
130
7.2 588248000
Length: 80 - 130 cm
3.3 580343000
Schutzleiste KS
0.38 588170000
Column formwork KS
[kg]
Article n
[kg]
Article n
42.2 580366000
Panel strut 540
49.0 588249000
29.6 588250000
(A) Prop head
3.5 588244000

consisting of:
Galvanised
10.6 588251000
(C) Prop shoe
2.1 588245000
Elementsttze 540
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
Galvanised
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
29.6 588250000
Galvanised
10.6 588251000
Galvanised
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementsttze 340
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe

Galvanised
Length: 75.5 cm
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
14.2 588247000
Galvanised
3.7 582768000
Prop head KS
7.2 588248000
Galvanised
Length: 14 cm
Width: 11 cm
Height: 14 cm
Length: 80 - 130 cm
Galvanised
0.85 580342000
Sttzenkopf KS

0.31 588631000
Galvanised
Length: 18 cm
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Galvanised
Diameter: 1.6 cm
Shifting wheel KS
Umsetzrad KS
15.8 580358000
Galvanised
Max. load: 300 kg
131
Doka Wall System

[kg]
Article n
211.8 588382000
Galvanised
Length: 173 cm
Width: 173 cm
Height: 130 cm
[kg]
Access system XS
Connector XS KS
13.2 580367000
Anschluss XS KS
Galvanised
Length: 115 cm

Platform adapter KS
11.4 580341000
Bhnenanschluss KS
Article n
10.0 588637000
Galvanised
Length: 123 cm
Galvanised
Length: 74 cm
Width: 12 cm
Height: 20 cm
33.2 588640000
Galvanised
Platform planking KS
32.3 580360000
Fertigbelag KS

Length: 90 cm
Width: 85 cm
Railing KS 1.00x0.85m
12.4 580363000
Fertiggelnder KS 1,00x0,85m
Galvanised
19.1 588641000
Galvanised
Side railing KS 0.30m
2.6 580364000
Seitengelnder KS 0,30m
Galvanised
Length: 38 cm
Width: 30 cm
Height: 53 cm
15.0 588620000
Securing barrier XS
4.9 588669000
Galvanised
Length: 80 cm

16.5 588643000
Galvanised
Connecting pin 10cm
0.34 580201000
Galvanised
Length: 14 cm
132
Column formwork KS
[kg]
Ladder cage exit XS
Article n
[kg]
Article n
17.0 588666000
Galvanised
Height: 132 cm
133
Doka Wall System
Column formwork Top 50

Fair-faced concrete columns with complex geometry: The column formwork Top 50 is ideal for
the job. Only a few individual components, and
virtually any shape can be formed.
HLAG Asten, Austria
Construction work by: Joint venture bridges:
Held & Francke Alpine-Mayreder-Porr
Efficient forming of any shape and size

eshble fr ure
i
s
s
i
Perm te press
re
2
conc
Complicated cross-sections, high columns, multiple formwork

re-uses, high requirements for the quality of the finished facework:
The column formwork Top 50 becomes more and more economical
as the number of special requirements increases.
/m
90 kN
Any column size, straight from the modular

system ...
for speedy forming of any column cross-section with standard parts
for optimum adaptation to any special geometry up to 5 m in diameter
for column cross-sections up to 120 x 120 cm with only one splice plate
for first-class concrete surfaces with any sheeting

consulting, planning and preassembly from a single-source supplier
end-to-end formwork beams for maximum rigidity
flexibility to adapt to widely differing sets of requirements
Enhanced safety throughout the use cycle ...

safe work practices with the ladder system XS and the Doka column
formwork platform 150/90 cm
Free choice of anchorages inside or

outside the concrete
Any cross-section is possible by

using the standard components
from the modular system
The column formwork Top 50 can be combined with any sheeting. Our Ready-to-use service
supplies even unusual shapes on time, straight to the site.
The new ladder system XS is available for

enhanced site safety with the column
formwork Top 50. For more information, see
Working and Protection Platforms.
135
Doka Wall System

[kg]
Article n
[kg]
Article n
Doka Wall
Column
formwork
SystemTop 50

19.6 580003000
24.7 580004000
Lifting bracket for column formwork

Kranse fr Sttzenschalung
Length: 85 cm
Width: 85 cm
Max. load: 2500 kg
Painted blue
cm

20.2 580040000
25.0 580041000
Painted blue
cm

Stahlwandriegel WU12 Top50
37.9 580087000
44.2 580088000
Painted blue
cm
Flange clamp H20

Galvanised
Width: 13 cm
Width-across: 19 mm
Flange clamp G
13.8 580603000
Painted blue
Length: 51 cm
Width: 40 cm
Column connecting plate 6/8

Sttzenlasche 6/8
15.0 580072000
Painted blue
Length: 58 cm
4.4 580604000
Painted blue
Length: 20 cm
Tie rod 15.0mm galvanised 1.00m

Tie rod 15.0mm non-treated 1.00m
Ankerstab 15,0mm 1,0m
Galvanised
Width: 13 cm
Width-across: 19 mm
Wing nut 15.0
0.31 581961000
Flgelmutter 15,0
Galvanised
Length: 10 cm
Height: 5 cm
Width-across: 27 mm
1.6: 120 kN
195 kN)
6.2 580460000
Galvanised
Height: 59 cm
Max. load: 1300 kg
1.4 581823000
1.4 581874000

1.6: 120 kN
Breaking load: 195 kN
of fracture!
1.1 580120000
Flanschklammer G
Kranse
Winkellasche 90/50
1.0 580135000
Flanschklammer H20
Lifting bracket
37.5 580020000
44.2 580021000
Painted blue
cm

65.0 580607000
Connecting pin 10cm
0.34 580201000
Galvanised
Length: 14 cm
Spring cotter 6mm
0.06 580204000
Federvorstecker 6mm
Galvanised
Length: 13 cm
136

[kg]
Article n
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementsttze 340
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe
Eurex 60 550
Eurex 60 550

2.1 588245000
42.5 582658000
14.2 588247000
7.2 588248000
Length: 80 - 130 cm
Galvanised
18.0 582651000
Powder-coated, blue
Aluminium
Length: 250 cm
(C) Prop head
Galvanised
Article n
Powder-coated, blue
Aluminium
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
[kg]
3.5 588244000
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
8.6 582652000
Aluminium
Length: 100 cm
Diameter: 12.8 cm
8.5 582660000
Galvanised
Length: 31 cm
Width: 12 cm
Height: 33 cm
29.0 582659000
Galvanised

Panel strut 540
49.0 588249000
(A) Prop head
3.5 588244000
Elementsttze 540
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe
3.9 582657000
Galvanised
Length: 15 cm
Width: 15 cm
Height: 30 cm
C

2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
29.6 588250000
Galvanised
10.6 588251000

Galvanised
C
3.7 582768000
Galvanised
Length: 75.5 cm

0.31 588631000
Galvanised
Length: 18 cm
137
Doka Wall System

[kg]
Doka coil 16mm
Article n
0.009 588633000
Doka-Coil 16mm
[kg]
Galvanised
Height: 7 cm
12.0 587153000
Betonierkonsole L
0.27 584375000
Gerstrohranschluss
Galvanised
Diameter: 1.6 cm
Article n
0.84 682002000
Painted blue
Length: 101 cm
Height: 159 cm
Galvanised
Width-across: 22 mm
Handrail clamp S
11.5 580470000
Galvanised
14.0 580477000
Galvanised
Length: 86 cm
Height: 181 cm
Tool box GF
6.5 580390000
GF-Werkzeugbox

30.4 580476000
Galvanised
Length: 121 cm
Height: 235 cm
0.73 580580000
Galvanised
Length: 30 cm
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)
(L)
Fork wrench 13/17

Fork wrench 22/24
Fork wrench 30/32
Ring spanner 17/19
Extension 11cm
Extension 22cm
Box nut 13
Box nut 24
Box nut 30 1/2"
0.08
0.22
0.80
0.27
0.20
0.31
0.16
0.16
0.06
0.12
0.20
580577000
580587000
580897000
580590000
580581000
580582000
580583000
580598000
580576000
580584000
580575000
3.0 580478000
Galvanised
Height: 20 cm

Gerstrohr 48,3mm
Galvanised
138
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Assembly angle Top50
7.4 580082000
Montagelasche Top50
Painted blue
Length: 55 cm
Width: 48 cm
3.5 580394000
Bandzwinge B 5,00m
Galvanised

[kg]
Hole gauge Top50
Article n
2.9 580080000
Bohrplatte Top50
[kg]
Positioning rail .....m
33.2 588640000
Painted blue
Length: 17 cm
Width: 15 cm
Tool: Drill bit (diameter 10 mm)
Article n
Galvanised
1.8 580079000
Fhrungsschiene .....m
Painted blue
Angle connector 9x5cm
0.22 580381000
Winkelverbinder 9x5cm
Galvanised
19.1 588641000
Galvanised
Rafter plate right
0.09 582521000
Rafter plate left
0.09 582522000

Sparrenpfettenanker
Galvanised
Length: 17 cm
15.0 588620000

Securing barrier XS
4.9 588669000
Galvanised
Length: 80 cm
16.5 588643000
Galvanised
Access system XS
20.8 588662000
Galvanised
Width: 89 cm
Height: 63 cm
Ladder cage exit XS
17.0 588666000
Galvanised
Height: 132 cm
2.1 588664000
Galvanised
Length: 41 cm
139
Doka Wall System
Column formwork RS
Perfectly circular columns in superb fair-faced
concrete quality can be formed with the column
formwork RS. The column formwork platform
150/90cm ensures that work can proceed in safety.
Europark Salzburg, Austria
Construction work by: Joint venture Europark
Salzburg Alpine-Dywidag-Strabag
Column formwork RS
The steel formwork for high-grade

reinforced-concrete round columns
eshble fr ure
i
s
s
i
Perm te press
re
2
conc
N/m
150 k
The column formwork RS produces finished surfaces to meet

extra-high requirements (fair-faced concrete). Precision-manufactured half-shells ensure that the column cross-section is perfectly circular, even at the shell joins.
Circular-section columns, straight from the

modular system ...
Transport
RS elements can be lifted and
carried singly or in stacks. Integrated
stacking lugs keep the elements
from slipping.
3000
with integrated quick-action latch for speedy, zero-play joins between

panels
with diameters from 30 to 60 cm and a height grid of 0.50 m
with perfect butt joins because the panels have an integral centring
function
For curved formwork or oval-section columns, mating directly without
adapters to:
Doka framed formwork Framax Xlife and Alu-Framax Xlife
Doka circular formwork H 20
Simple to combine with Doka column formwork platforms and ladder
system XS
500
250
1000
The column formwork RS can be combined with panels from the framed formwork Framax
Xlife system.
Panel heights
Element heights are 25, 50, 100 and 300 cm, giving a height grid of 0.50 m.
The new ladder system XS is available for

enhanced site safety with the column
formwork RS. For more information, see
Working and Protection Platforms
141
Doka Wall System

[kg]
Article n
149.0
65.0
36.0
22.5
166.0
76.0
42.0
26.0
175.0
80.7
44.9
27.7
188.0
85.0
48.0
29.0
195.0
88.0
49.0
31.5
217.0
96.5
53.0
34.2
587909000
587908000
587907000
587944000
587912000
587911000
587910000
587945000
587915000
587914000
587913000
587946000
587918000
587917000
587916000
587947000
587921000
587920000
587919000
587948000
587927000
587926000
587925000
587950000
[kg]
Article n
Doka Wall
Column
formwork
SystemRS
Column element RS D30 3.00m

Sttzenelement RS
42.2 580366000
29.6 588250000

consisting of:
Galvanised
10.6 588251000
(C) Prop shoe
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
Galvanised
A
Painted blue
24 cm, 25 cm, 55 cm, 65 cm,
70 cm, 75 cm and 80 cm on inquiry!
B
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementsttze 340
consisting of:
24.0 580365000
14.2 588247000

consisting of:
Galvanised
(B) Prop shoe

7.2 588248000
Length: 80 - 130 cm
(C) Prop shoe
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
14.2 588247000
Galvanised
Galvanised
A
142
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
7.2 588248000
Length: 80 - 130 cm
Galvanised
Column formwork RS
[kg]
Article n
Panel strut 540
49.0 588249000
(A) Prop head
3.5 588244000
Elementsttze 540
consisting of:
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe
Eurex 60 550
Eurex 60 550

2.1 588245000
42.5 582658000
3.5 588244000
29.6 588250000
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
10.6 588251000

Galvanised
18.0 582651000
Powder-coated, blue
Aluminium
Length: 250 cm
(C) Prop head
Galvanised
Article n
Powder-coated, blue
Aluminium
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
[kg]
8.6 582652000
Aluminium
Length: 100 cm
Diameter: 12.8 cm
8.5 582660000
Galvanised
Length: 31 cm
Width: 12 cm
Height: 33 cm
29.0 582659000
Galvanised
3.9 582657000
Galvanised
Length: 15 cm
Width: 15 cm
Height: 30 cm
C

3.7 582768000
Galvanised
Length: 75.5 cm

0.31 588631000
Galvanised
Length: 18 cm
143
Doka Wall System

[kg]
Doka coil 16mm
Article n
0.009 588633000
Doka-Coil 16mm
Galvanised
Diameter: 1.6 cm

211.8 588382000

17.5 587940000
Bhnenanschluss RS
Galvanised
Length: 78 cm
Width: 78 cm
Height: 19 cm
Bracket connection RS

Galvanised
Height: 61 cm
Super plate 15.0
Galvanised
Width: 103 cm
Height: 185 cm
0.69 583002000
Connecting pin 10cm
0.34 580201000
15.0 588620000

Galvanised
Length: 14 cm
Spring cotter 6mm
0.06 580204000
Federvorstecker 6mm
Screw set strut SL-1
Galvanised
Length: 13 cm
0.56 582831000
Schraubensatz Sttze SL-1

Galvanised
Sealing tape KS 20x5mm 10m

Dichtungsband KS 20x5mm 10m
Weight per roll
144
580046000
580048000
580050000
580052000
580054000
580056000
580058000
580060000
Galvanised
Length: 36 cm
51.0
60.4
71.5
82.1
92.2
102.0
112.4
122.2
Galvanised
Height: 6 cm
Diameter: 12 cm
Width-across: 27 mm
1.6: 120 kN
195 kN)
12.5 588167000
Framax-Konsole 90
580009000
580010000
580011000
580012000
580013000
580014000
580015000
580016000
580017000
0.91 581966000
Superplatte 15,0
Framax bracket 90
48.7
54.2
60.2
68.4
79.4
89.1
102.0
112.4
118.0
Painted blue
cm
5.2 587941000
Konsolenanschluss RS
Article n
Painted blue
cm
Galvanised
Length: 173 cm
Width: 173 cm
Height: 130 cm
Platform adapter RS
[kg]
0.17 580348000
Column formwork RS
[kg]
Article n
Access system XS
[kg]
Ladder cage exit XS
17.0 588666000
Connector XS RS
22.2 587955000
Anschluss XS RS
Article n
Galvanised
Height: 132 cm
Galvanised
Length: 115 cm

10.0 588637000
Galvanised
Length: 123 cm
33.2 588640000
Galvanised
19.1 588641000
Galvanised
Securing barrier XS
4.9 588669000
Galvanised
Length: 80 cm
16.5 588643000
Galvanised
145
Doka Floor System
The Doka Floor System
Floor formwork
Doka floor-formwork
systems are ideal for all
areas of application and
for the toughest
requirements.
Dokamatic table
Doka Xtra
Dokaflex 1-2-4
The unbeatably fast tableform with the perfect fit
The manual system with

integrated removal logic
The versatile manual

system for floor slabs
Formwork type
Tableform
Manual formwork
Manual formwork
Max. shoring
heights [m]****
5,80*/7,30**
and higher***
5,90*
5,90 and higher***
Grids [cm]
400x200/400x250
500x200/500x250
Flexible
Flexible
Xtra head for early

formwork removal
No
Yes
No
Applications
[typical]
Structural engineering, office blocks, basement carparks, skeleton structures
Structural engineering,
residential buildings
Structural engineering,
residential buildings
*
with Eurex floor props
** with Dokamatic table frames
*** in combination with load-bearing towers Staxo
**** precise dimensions as per user information brochure
146
Load-bearing towers
The combination with
Doka load-bearing
towers means that the
floor slabs of very high
rooms and buildings can
be safely supported.
Staxo 100
d2
The ultra-heavy-duty,
easy-to-use load-bearing
tower made of steel,
complete with built-in
safety
The proven load-bearing

tower made of steel
Max. loads per leg****
100 kN (with basic frame

0.90 and 1.20 m)
60 kN
Integral
connectors
Yes
Bracing
(standard use)
Diagonal cross
Horizontal braces and

diagonal braces
Material
Steel
Steel
Yes
Yes
Areas of application
and industrial engineering
No
147
Doka Floor System
Dokamatic table
The Dokamatic table helps save on labour and on
crane time: One man using the shifting trolley
with attachable drive unit can move the tables to
the next casting location on the same level. The
system is optimised for minimal forming times on
large-area projects and deals easily with varying
requirements in terms of statics and geometry.
Dokamatic table
The unbeatably fast tableform

with the perfect fit
The innovative design of the Dokamatic table makes for even faster
formwork handling whenever large floor slabs have to be cast. Standard
functional components can be installed for straightforward, speedy and
safe adaptation to changing requirements on the construction site.
Fast repositioning reduces labour costs ...

because fully assembled units are manoeuvred quickly into place no laborious carrying of individual components from one location to the next
because practical shifting devices make for virtually fatigue-free operations
with the new table lifting system TLS for vertical lifts without crane
because easier to handle and safer than hand-operated formwork, particularly
as room heights increase
Highly versatile and safe at the edge of the floor slab ...
because the integrated table platforms mean fewer working and protection
platforms
because the props can be set effortlessly for table overhangs up to 1.50 m
because of the straightforward system solutions for edge beams and end
formwork
because of the pivoting and lockable props for unobstructed removal
across parapets
Perfect adjustment in all three dimensions ...

with insertion beams and system connection to the table waling for speedy
with direct connection to the table frames and Staxo load-bearing towers for
high room heights
with easily adjustable swivel head for speedy adaptation to varying requirements
in terms of statics and geometry
with the option of using the formwork sheeting that best suits the architectural
requirements of the building
149
Doka Floor System
The Dokamatic table system

Dokamatic table
2000
2500
4000
5000
Comes in 4 rentable standard sizes

with grid logic:
4,0 x 2,0 m, 4,0 x 2,5 m, 5,0 x 2,0 m
and 5,0 x 2,5 m
Table supporting grilles available
for use with any required formwork sheet
Made up of high-grade system
components such as the sturdy
Dokamatic table waling 12 and
Doka beams H20 top for outstanding durability and minimum
post-use costs
Fully assembled Dokamatic tables
delivered to your site right on time
Dokamatic swivel head 40

The floor props install quickly and
easily; a formworker's claw
hammer is the only tool needed
The floor props pivot and lock in
one working position and two idle
positions, so it is easy to remove
the table over parapets and railings
Rigid positioning of the props and
optimum bracing between head
and cross beam for increased loadbearing capacity of the tables
The swivel head repositions easily
in the steel yoke for optimum
adaptation to the structure
Floor props Eurex

Floor props Eurex are type-tested to
EN 1065 and are the right choice for
every application. The high loadbearing strength of 20 kN (Eurex 20) and
30 kN (Eurex 30) is supplemented by
a raft of practical details for easy
handling
Consecutively numbered pegging
holes facilitate speedy height
adjustment
Curved peg ends reduce the risk
of injury and make the props
easier to use
A special thread geometry makes
the props easy to back off even
under high loads; a few blows
with a hammer suffice
150
The rigid connection with the superstructure increases load-bearing

capacity by 10 kN per prop:
Eurex 20-prop carries 30 kN
Eurex 30-prop carries 40 kN
You save time, because the crew
has fewer props to set and the
tables are quickly set up and
lowered
Widely spaced props make it
much easier to move materials
around underneath the shuttered
floor slab
Safe shoring of slab thicknesses
up to 85 cm
Dokamatic table
Working with the Dokamatic tables

Engaging the props
The hinge mechanism of the Dokamatic swivel head 40 is simplicity itself to operate and permits each prop of the Dokamatic
table to be locked reliably in a
working position or either in
two angled idle positions.
The props of the Dokamatic table can be locked at angles of

75 (see photo) and 90 for unobstructed manoeuvring over
parapets.
Repositioning the props

A few blows of a hammer on the
quick-action lock are all that is
necessary to locate, reposition
or remove a prop so the table
is easy to adapt to a very wide
range of tasks.
151
Doka Floor System
Integrated closures
Dokamatic insertion beams integrate
closures into the system.These
insertion beams are inserted or
moved out as necessary to form
supports for the formwork sheeting.
Closure and table can be moved as
a unit - so less crane time needed
No need for additional shoring
Dokamatic table platform

Mounts directly on the Dokamatic
table and offers maximum safety for
work close to the edge of the slab
Due to the hinged railing, the Dokamatic table platform can be repositioned together with the table. The
Doka shifting trolley manoeuvres the
combination smoothly into position
underneath the slab.
Dispenses with additional working
and protection platforms, so less
costs for labour and materials and
additional savings because of no lost
anchor components
Permits platform widths up to 1.50 m
152
Dokamatic table
Integrated closure at slab edges

Simplified, speedy forming of slab beams with Doka
end shuttering. Perfect for beams up to 60 cm in
height (the end shuttering adjusts in steps of 5 cm).
Height adjustment
The Dokamatic table frames 1.50 m expand the usability of the

Dokamatic table to room heights up to approximately 7.0 m.
If the room height is in excess of 7.0 m, the Dokamatic

table combines effortlessly with Staxo.
Logistics and transportation

The compact design means
that Dokamatic tables can
be stacked for transportation to save valuable space
on trucks for better logistics and minimised transportation costs.
153
Doka Floor System
Vertical lifting without crane

Doka table lifting system TLS
The new table lifting system from Doka sets new
standards for the vertical lifting of Dokamatic tables
without crane
Higher cost-efficiency from lifting Dokamatic tables

without crane
The Doka table lifting system TLS lifts Dokamatic tables
from one level to the next, freeing up the site crane for
other jobs. The cranes are available for other tasks, so
the project progresses all the faster.
More safety with optimum solutions
A comprehensive safety package ensures fast, safe work
procedures, both for operating the table lifting system
and for repositioning.
If there's no need for a crane, there's no danger from the
wind
Crane operations have to be shut down for safety reasons when the wind really starts to blow. The Doka table
lifting system TLS, on the other hand, can keep work progressing in safety, with speed and efficiency.
Working from firm ground

Normal practice is to make only the lift to level one from
the ground. In actual fact, however, it is possible to work
from the ground up to heights of up to 40 m.
Suspended on the slab

Conversion to a climbing device is quick and easy.
Suspend and secure, and then move straight on to repositioning the Dokamatic tables. In this position tables can
be repositioned over three levels.
154
Dokamatic table
Vertical lifting by crane

Dokamatic repositioning sling and extending platform
The Dokamatic 13.00 m repositioning slings lift the Dokamatic tables off the extending platform and up to the
next level.
The repositioning sling 13.00 m can be used to lift table

superstructures and complete tables. The sling is 13 m in
length and is easy to engage and disengage.
Doka transport fork DM 1.5t adjustable

The Doka transport fork DM 1.5t adjustable is rated for
loads up to 1500 kg, and it folds down for transport to
site. The forks adjust to four different pitch settings, so
they adapt perfectly to any table dimension or specific
application. The pawl lock facilitates fork positioning and
ensures maximum safety while repositioning is in progress.
Horizontal repositioning
Doka shifting trolley and attachable
drive unit
One man can shift up to 12.5 m2 of formwork complete
with all accessories to the next casting section, and
there is no need for a crane
By using the shifting trolley DF, Dokamatic tables can
be lowered and shifted hydraulically, quickly and safely, to the next section on the same level. The attachable
drive unit DF enables an easy repositioning of the Dokamatic tables.
155
Doka Floor System
References
Panoramahaus Dornbirn, Austria
Lenaupark Shopping City, Austria
156
Company premises in Bassano, Italy
Vienna Skylink, Vienna International Airport, Austria
Dokamatic table
Angertal Ski Centre, Austria
Library Tower in Linz, Austria
European Court of Justice, Luxemburg
157
Doka Floor System
Dokaflex table
The Dokaflex table is easy to use and practical, it can be moved
quickly and adjustment is easy, so it makes for economy on any
largescale floor-slab job. Of course, Dokaflex tables are fully
compatible with Dokamatic tables.
Vienna, Austria's, T-Center St. Marx complex has a 21,000 m2 floorplan, features inclinedplane slabs and walls, inter-nested structural components and uniquely styled concrete
supports. 8,350 m2 of Dokaflex tables kept things moving ahead rapidly throughout this construction project.
158
Dokaflex tables are definitely the right

choice for excellent large-area fair-faced
concreting projects.
Dokaflex table
The tried-and-tested, fast tableform

On the "Lindaupark" project in Lindau, Germany, the high floor-to-ceiling heights were
handled easily without additional work on
the superstructure. Mushroom-head formwork was used to integrate the column
heads into the slabs. The grid logic of the
various table formats meant that Dokaflex
tables were ideal, the most economical
formwork system for the project.
A mere 14 months were all the time needed

to complete the 27,500 m2 of office space in
the Campus M office and technology centre
in Munich, Germany with Dokaflex tables
of various sizes, up to and including special
made-to-measure trapezoidal formats.
Doka's Ready-to-Use service made sure
that the tailor-built special Dokaflex tables
for the various gradients of the ramp for the
multi-storey carpark were on the site precisely when needed.
159
Doka Floor System
References
Phoenix Center Shopping Mall, Germany
Marietta Quartier Magdeburg, Germany
160
Vienna Airport Control Center, Vienna,

Austria
Dokaflex table
Office Block in Dubai, United Arab Emirates
Techgate Tower Vienna, Austria
161
Doka Floor System

[kg]
Article n
515.0
656.0
480.0
600.0
586200000
586201000
586202000
586203000
[kg]
Article n
Doka Floor table

Dokamatic
System
Dokamatic table 2.50x4.00m 21mm

Dokamatic-Tisch
Doka floor prop Eurex 20 250
12.9 586086000
15.3 586087000
17.8 586088000
22.2 586089000
34.6 586090000
51.0 586139000


Doka-Deckensttze Eurex 20

Dokamatic-Tisch
Doka formwork sheet 3-S plus 21mm 9.7/200cm

Doka formwork sheet 3-S plus 21mm 20/200cm
560.0
685.0
522.0
625.0
586204000
586205000
586206000
586207000
2.0
2.5
4.2
5.3
186109000
186110000
186107000
186108000
Doka-Schalungsplatte 3-S plus 21mm

3-SO formwork sheet as per
NORM B3023
With boil-proof and weatherproof
bonding
Face side: High-quality MUF synthethic-resin surface plus PUR sealant and light corundum sanding
Rear side: High-quality MUF synthetic-resin surface

Dokamatic table grille 2.50x4.00m

Dokamatic-Tischrost
14.8 586092000
16.7 586093000
20.5 586094000
24.9 586095000
29.2 586119000


2.5
3.1
5.2
6.5
187052000
187053000
187050000
187051000
418.0
536.0
402.0
508.0
586208000
586209000
586210000
586211000

NORM B3023
bonding
Galvanised
Perm. capacity: 20 kN at any telescoping length to EN 1065
Galvanised
Removable folding tripod 1.20m

Sttzbein 1,20m
Galvanised
Height: 120 cm
3.7 582768000
Galvanised
Length: 75.5 cm
162
20.5 586145000
Dokamatic table
[kg]
Dokamatic table waling 12 4.00m
Dokamatic table waling 12 5.00m
Dokamatic-Tischriegel
Article n
122.5 586212000
154.0 586213000
[kg]
Universal end-shutter support 30cm
Universal-Abschalwinkel 30cm
Article n
1.0 586232000
Galvanised
Height: 21 cm
Painted blue
cm
Doka mobile scaffold tower Z

Doka-Fahrgerst Z
consisting of:
Dokamatic swivel head 40
17.1 586214000
Dokamatic-Schwenkkopf 40
Galvanised
Length: 60 cm
Dokamatic table platform 1.00/2.00m

Dokamatic table platform 1.00/2.50m
Dokamatic-Tischbhne
92.0 586218000
103.0 586217000

(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)
Attachable frame Z 1.00m

Railing frame Z 1.00m
Handrail post Z 1.80m
Platform Z with manhole flap 1.80m
Platform Z without manhole flap 1.80m
Cross board Z 1.35m
Longitudinal board Z 1.80m
Diagonal brace Z 2.00m
Horizontal brace Z 1.80m
Triangular bracket Z
10.0 586033000
(not illustrated)
Galvanised
Length: 112 cm
Height: 124 cm
Aluminium
Follow the directions in the "Instructions for assembly and use"!
19.5 586227000
7.1 586030000
2.5 586031000
2.5 586032000
(not illustrated)
(O) Ballast Z
Dokamatic-Bhnenkonsole 1,00m
586016000
586017000
586021000
586022000
586023000
586024000
586025000
586026000
586027000
586028000
586029000
(not illustrated)
(L) Guide roller Z D200mm

(M) Entrance step bow Z
(N) Platform diagonal strut Z
Dokamatic platform bracket 1.00m
6.7
11.3
4.1
6.5
17.5
17.0
4.0
5.1
3.0
2.8
5.3
J
M
L
Dokamatic strut connection
1.3 586215000
Dokamatic-Sttzenanschluss
Dokamatic platform extension 0.50/2.00m

Dokamatic platform extension 0.50/2.50m
Dokamatic-Bhnenverbreiterung
Galvanised
Height: 26 cm
32.5 586220000
37.0 586219000

Dokamatic scaffold connection

Dokamatic-Gerstanschluss
3.4 586216000
Galvanised
Height: 27 cm
Dokamatic extension profile 0.50m
Dokamatic-Verbreiterungsprofil 0,50m
Galvanised
Length: 49 cm
Dokamatic platform profile 1.00m

Dokamatic-Bhnenprofil 1,00m
6.0 586228000
11.0 586221000
Galvanised
163
Doka Floor System

[kg]
Dokamatic table frame 1.50m
Dokamatic-Tischrahmen 1,50m
Article n
59.8 586224000
Galvanised
[kg]
Shifting trolley DF
566.0 586080000
Umsetzwagen DF
(A) Positioning lever for shifting trolley DF

(B) Brace stirrup 8
Diagonal cross 9.150

5.2
6.6
8.0
5.7
6.9
6.1
9.1
Diagonalkreuz
582773000
582774000
582775000
582612000
582614000
582620000
582626000
Article n
6.0 586063000
2.7 582751000
4 pcs.
Galvanised
Width: 19 cm
Height: 46 cm
Width-across: 30 mm
Never weld or heat tie-rods - risk of fracture!
Galvanised
Length: 181 cm
Width: 130 cm
Max. load: 1500 kg
Electricity supply for hydraulic drive:
220 V / 50 Hz
Galvanised
Safety plate for brace stirrup 8

Sicherungsblech fr Spannbgel 8
0.05 582753000
Powder-coated, red
Length: 23 cm
Extension for shifting trolley DF

Ausleger fr Umsetzwagen DF
Dokamatic insertion beam 2.45m

Dokamatic-Einschubtrger 2,45m
40.0 586015000
Galvanised
Length: 128.4 cm
10.0 183045000
Varnished yellow
Stacking frame DF
82.0 586079000
Aufsatzrahmen DF
Supporting head H20 DF
Galvanised
Length: 134 cm
Width: 130 cm
Height: 75 cm
0.77 586179000
Haltekopf H20 DF
Galvanised
Length: 19 cm
Width: 11 cm
Height: 8 cm
Dokamatic front wood strip 4x8cm 2.60m

Dokamatic-Stirnholz 4x8cm 2,60m
4.2 183046000
Alu stacking frame DM 2.25m
Varnished yellow
Alu-Aufsatzrahmen DM 2,25m
Spring locked connecting pin 16mm

Federbolzen 16mm
0.25 582528000
Galvanised
Length: 15 cm
T ledge 21/42 2.00m
0.34 580196000
T-Leiste 21/42 2,00m
Grey
164
59.2 586238000
Aluminium
Length: 187 cm
Width: 128 cm
Height: 225 cm
Dokamatic table
[kg]
Attachable drive unit DF
Article n
512.0 586062000
Andockantrieb DF
[kg]
Lifting extension bracket DF 1.5t
Ausleger DF 1,5t
Painted blue
Length: 100 cm
Width: 100 cm
Height: 130 cm
Transport fork DM 1.5t adjustable

Umsetzgabel DM 1,5t verstellbar
1134.0 586233000
Galvanised
Length: 634 cm
Width: 245 cm
Height: 507 cm
Max. load: 1500 kg
Transport fork DF 1t 0.90m

220.0 586069000
245.0 586070000
274.0 586071000
Gabel DF 1t
Galvanised
Length: 411 cm
Height: 58 cm
Max. load: 1000 kg
Transport fork DF 1.5t 0.90m

Extension clamp H20 for fork 1.5t

Aufsatzklemme H20 fr Gabel 1,5t
Extension profile H20 for fork 1.5t

Aufsatzprofil H20 fr Gabel 1,5t
Ausleger DF 1t
9.1 587532000
Painted blue
Length: 87 cm

6.0 587533000
Painted blue
Length: 55 cm
34.1 586237000
Galvanised
Length: 83 cm
Height: 52 cm
Lifting extension bracket DF 1t
4.5 586236000
Galvanised
Height: 45 cm
480.0 586065000
520.0 586066000
540.0 586067000
Galvanised
Length: 638 cm
Height: 71 cm
Max. load: 1500 kg
240.0 586235000
Vertikalverlngerung DM 1,5t 3,30m

Galvanised
Height: 352 cm
475.0 586064000
Galvanised
Length: 456 cm
Width: 82 cm
Height: 386 cm
Max. load: 1500 kg
Gabel DF 1,5t
Vertical extension DM 1.5t 3.30m
Article n
Beam clamp Top50
1.2 580081000
Trgerklammer Top50
Painted blue
Height: 15 cm
263.0 586068000
Galvanised
Length: 336 cm
Width: 66 cm
Height: 309 cm
Max. load: 1000 kg
Connecting pin 10cm
0.34 580201000
Galvanised
Length: 14 cm
Spring cotter 6mm
0.06 580204000
Federvorstecker 6mm
Galvanised
Length: 13 cm
165
Doka Floor System

[kg]
Dokamatic floor beam plate 60cm
Dokamatic-Unterzugslasche 60cm
Article n
21.1 586226000
[kg]
Painted blue
Height: 68 cm
Dokamatic end-shutter unit 50cm

Dokamatic-Abschaleinheit 50cm
Article n
28.0 580671000
Galvanised
16.8 586223000
Galvanised
Length: 71 cm
Height: 57 cm

35.2 580673000
Galvanised

12.8 588151000
Painted blue
Leg length: 60 cm
Dokamatic edge clamp 0.70m

Dokamatic-Randklemme 0,70m
3.9 586222000
Galvanised
17.7 584373000
Galvanised
Lashing strap 5.00m
2.8 586018000
Zurrgurt 5,00m
Yellow
Max. tensile force: 10 kN

0.31 588631000
Handrail clamp S
Galvanised
Length: 18 cm
Doka coil 16mm
Galvanised
0.009 588633000
Doka-Coil 16mm
Galvanised
Diameter: 1.6 cm

Handrail post 1.10m

10.5 586231000
Green
Max. load: 2000 kg
the strap itself!
166
11.5 580470000
5.6 584384000
Schutzgelnder 1,10m
Galvanised
Height: 134 cm
Dokamatic table
[kg]
Article n
0.03 584385000
Steckhlse 24mm
[kg]
Screw sleeve 20.0
33.2 588640000
Grey
Length: 16.5 cm
Diameter: 2.7 cm
Article n
Galvanised
0.03 584386000
Schraubhlse 20,0
Yellow
Length: 20 cm
Diameter: 3.1 cm
3.5 580394000
Bandzwinge B 5,00m
Galvanised
19.1 588641000
Plastic mallet 4kg
Galvanised
4.5 586097000
Kunststoffhammer 4kg
Blue
Length: 110 cm
Securing barrier XS
4.9 588669000
Galvanised
Length: 80 cm
0.73 580580000
Umschaltknarre 1/2"
Galvanised
Length: 30 cm
16.5 588643000
Galvanised
Box nut 30 1/2"
0.20 580575000
Stecknuss 30 1/2"
Access system XS
Ladder cage exit XS
17.0 588666000
Connector XS DM/SL-1
12.0 588672000
Anschluss XS DM/SL-1
Galvanised
Height: 132 cm
Galvanised
Length: 100 cm
167
Doka Floor System

[kg]
Ladder adapter XS
Article n
5.0 588673000
Leiternfu XS
[kg]
Lifting mast TLS 1.50m
80.5 586328000
Hubmast TLS 1,50m
Galvanised
Height: 50 cm
Article n
Galvanised
Table-Lift system TLS

Basic unit TLS
2213.0 586301000
Basiseinheit TLS
Supporting profile TLS 5.15m

Absttzprofil TLS 5,15m
Galvanised
Length: 431 cm
Width: 242 cm
Height: 274 cm
Lifting platform TLS centre 3.00x1.60m

Hubbhne TLS mitte 3,00x1,60m
293.0 586307000
Hubbhne TLS hinten 3,00x1,60m
Pressure strut TLS 3.70m
63.0 586318000
Druckstrebe TLS 3,70m
Height: 139 cm
Lifting platform TLS back 3.00x1.60m
207.0 586317000
Galvanised
393.0 586308000
Height: 139 cm
Floor support TLS 0.40m
38.0 586315000
Deckenauflager TLS 0,40m
Protective grating TLS 1.80m

Schutzgitter TLS 1,80m
Galvanised
Length: 72.5 cm
Width: 32.1 cm
Height: 22.3 cm
19.0 586334000
Galvanised
Length: 141 cm
Height: 121 cm
Adjusting device TLS
13.0 586336000
Justiereinheit TLS
Galvanised
Length: 42 cm
Width: 16 cm
Height: 16 cm
Cable routing TLS
4.5 586333000
Kabelfhrung TLS
Galvanised
Length: 35 cm
Protecting metal sheet TLS right

Protecting metal sheet TLS left
Schutzblech TLS
Painted yellow
Length: 85 cm
Width: 32 cm
Height: 73 cm
168
5.5 586309000
5.5 586310000
Lifting mast anchoring TLS cross bar 0.40m

Hubmastverankerung TLS Traverse 0,40m
Galvanised
Length: 450 cm
104.0 586329000
Dokamatic table
[kg]
Lifting mast anchoring TLS strut
Hubmastverankerung TLS Strebe
Article n
16.0 586331000
Galvanised
Length: 153.5 cm
Width: 50 cm
Lifting mast anchoring TLS mast connection

Hubmastverankerung TLS Mastanschluss
Galvanised
Length: 72.6 cm
Width: 66 cm
Base profile TLS 2.14m
15.0 586332000
Article n
Switch box TLS ground control
4.0 586323000
Switch box TLS Storey door
4.0 586324000
Schaltkasten TLS Bodensteuerung

Height: 53 cm
Schaltkasten TLS Etagentre
Height: 53 cm
28.0 586312000
Bodenprofil TLS 2,14m
[kg]
Galvanised
Control cable TLS 20.0m blue

Control cable TLS 20.0m red
5.0 586303000
5.0 586304000
Bar for limit switch TLS
5.2 586325000
Steuerkabel TLS
Endschalterschiene TLS
Galvanised
Length: 186 cm
Strut for base profile TLS
10.0 586313000
Strebe fr Bodenprofil TLS
Galvanised
Length: 257.3 cm
Lifting cross bar TLS
35.2 586327000
Hebetraverse TLS
Galvanised
Length: 76.5 cm
Beam for storey door TLS 0.40m

Trger fr Etagentre TLS 0,40m
36.0 586319000
Galvanised
Length: 344 cm
Lifting beam TLS

Storey door TLS with handle
Etagentre TLS mit Griff
34.0 586321000
Length: 153 cm
Height: 126 cm
Storey door TLS with limit switch

Etagentre TLS mit Endschalter
60.0 586326000
Hebetrger TLS
Galvanised
Length: 325 cm
32.0 586322000
Length: 153 cm
Height: 126 cm
169
Doka Floor System

[kg]
Article n
Tool box TLS
16.5 586337000
(A) Combination wrench 8
0.03 586343000
Werkzeugbox TLS
consisting of:
[kg]

0.04 586342000
2 pcs.
(C) Combination wrench 13
15.0 588620000
2 pcs.
(B) Combination wrench 10
Article n
0.06 586341000
2 pcs.
(D) Combination wrench 17
0.16 586340000
2 pcs.
(E) Combination wrench 19
0.14 582837000
2 pcs.
(F) Combination wrench 22
0.20 582838000
2 pcs.
(G) Combination wrench 24
0.25 582839000
2 pcs.
(H) Combination wrench 30
0.43 582840000
2 pcs.
(I) Reversible ratchet 3/4"
1.5 580894000
Galvanised
Length: 50 cm
(J) Box nut 24

(K) Box nut 50
(L) Universal cone spanner 15.0/20.0
Dokaflex tables
Dokaflex table 2.50x4.00m 21mm
385.0
470.0
317.0
386.0
586052000
586053000
586050000
586051000

405.0
485.0
337.0
411.0
586054000
586055000
586056000
586057000
2.5
3.1
5.2
6.5
187052000
187053000
187050000
187051000
Dokaflex-Tisch
0.12 580584000
0.81 581449000
0.90 581448000
Galvanised
Length: 9 cm
Width-across: 50 mm
(M) Slot-screw screwdriver 3.5x0.6mm

(N) Box spanners 1/2" set of 29
(O) Allen key 5
0.20 586344000
2.0 586345000
0.02 586339000
2 pcs.
Dokaflex-Tisch
O
N

Torque wrench TLS 75-400Nm
1.8 586338000
Additional tools MF
4.1 580682000
1.5 580894000
Drehmomentschlssel TLS 75-400Nm

Length: 69 cm
Zusatzwerkzeuge MF
consisting of:
Galvanised
Length: 50 cm
(B)
(C)
(D)
(E)
(F)
Box nut 17 1/2"

Box nut 50
Extension 20cm 3/4"
Transition piece A 1/2"x3/4"
Universal cone spanner 15.0/20.0
0.07
0.81
0.68
0.18
0.90
580685000
581449000
580683000
580684000
581448000

NORM B3023
bonding
Table head 20
16.5 586085000
Tischkopf 20
Galvanised
Powder-coated, blue
Length: 41 cm
Width: 33 cm
Height: 30 cm
Galvanised
Length: 9 cm
Width-across: 50 mm
Table head 30
18.5 586078000
Tischkopf 30
Galvanised
Powder-coated, blue
Length: 44 cm
Width: 25 cm
Height: 30 cm
Connecting pin 10cm
0.34 580201000
Galvanised
Length: 14 cm
170
Dokamatic table
[kg]
Spring cotter 6mm
Article n
0.06 580204000
Federvorstecker 6mm
[kg]
Handrail post DF
Intermediate head DF
15.0 586076000
Steckgelnder DF
Galvanised
Length: 13 cm
Article n
Galvanised
Height: 142 cm
3.6 586058000
Zwischenkopf DF
Galvanised
Length: 25 cm
Width: 24 cm
Height: 34 cm
0.73 580580000
Umschaltknarre 1/2"
Connection unit DF 20/30
Galvanised
Length: 30 cm
0.93 586084000
Spanneinheit DF 20/30
Galvanised
Width: 15 cm
Height: 12 cm
Width-across: 19 mm
0.77 586179000
Haltekopf H20 DF
Beam screw S 8/60
0.16 580598000
Box nut 13
0.06 580576000
Hlsennuss 19
Galvanised
Length: 19 cm
Width: 11 cm
Height: 8 cm
0.06 580116000
Riegelverschraubung S 8/60
Galvanised
Length: 7 cm
Width-across: 13 mm
Stecknuss 13
Center bit DF 30
0.10 586081000
Lifting rod 15.0
1.9 586074000
Zentrumsbohrer DF 30
Umsetzstab 15,0
Painted blue
Height: 57 cm
Max. load: 300 kg for single beams;
1000 kg for double beams in conjunction with retaining plate 15.0.
of fracture!
Retaining plate 15.0
1.8 586073000
Jochplatte 15,0
Galvanised
Length: 17 cm
Width: 12 cm
Height: 11 cm
0.003 588180000

Blue
Diameter: 3 cm
Lifting hook DF
Umsetzbgel DF
5.9 586077000
Galvanised
Length: 42 cm
Width: 20 cm
Height: 36 cm
Max. load: 300 kg
171
Doka Floor System
Doka Xtra
The Doka Xtra floor system has integrated removal logic for straightforward, readily understandable work
procedures - significantly reducing
the quantity of materials, optimising
on-site logistics and providing maximum protection for the material used.
Doka Xtra
The hand-operated system with

integrated removal logic
Optimised cost-effectiveness deriving from the predefined removal
procedure is the characteristic of this low-cost, high-speed system,
with site staff on site occupied uniformly for maximum efficiency.
The free choice of sheeting leaves nothing to be desired when it
comes to the finished structure of the fair-face concrete.
Straightforward, readily understandable work

procedure ...
with three perfectly matched system components for optimised site logistics
with the 2.65 m Doka beam H20 top as longitudinal and cross beamr
with the Doka Xtra prop head with quick lowering device
with high-grade Eurex floor props with consecutively numbered pegging
holes and low release forces
to protect the material used
for prolonged usable life
for significantly lower post-use costs
for a high degree of flexibility: the formwork can be removed whenever
workers are available for the job
Reduced quantity of materials on site ...

because 75% of the formwork parts can be removed early
because quicker removal means that the formwork is ready for re-use all
the sooner
Safety and economy ...

with high-quality, durable system components
by combining the special Doka Xtra prop head with Eurex floor props for
complete stability during striking of the formwork
because the panels can be rented
with high-grade polyurethane surround for first-class concrete faces and
reduced investment costs
with non-slip surfaces for significantly enhanced safety at work
with the new Doka beam H20 top
173
Doka Floor System
The Doka Xtra system

Doka Xtra head
The new Doka Xtra head has a quicklowering function for smooth removal of the formwork and ensures
complete stability during striking.
Floor props Eurex
Floor props Eurex are type-tested to

EN 1065 and are the right choice for
every application. The high loadbearing strength of 20 kN (Eurex 20) and
30 kN (Eurex 30) is supplemented by
a raft of practical details for easy
handling.
holes facilitate speedy height
adjustment
Curved peg ends reduce the risk
of injury and make the props
easier to use
A special thread geometry makes
the props easy to back off even
under high loads; a few blows
with a hammer suffice
Doka beam H20 top
The Doka beam H20 top has unique

end reinforcements providing improved protection for the beam ends
to prolong usable life and minimise
post-use costs. The high level of
manufacturing quality with 100%
strength testing ensures uniformly
high product quality and load-bearing strength for safe utilisation in
the Doka Xtra system. The predefined positioning points facilitate
handling to a significant extent.
Certified by the Institut fr Bautechnik, Berlin.
174
Doka Xtra
Dokadur panels
Dokadur panels are the state of the
art for floor-slab formwork panels.
Special surface sealing with precision-metered corundum sanding
means maximised use cycles and
superb-quality concrete facing on
account of significantly better scuff
resistance, plus improved safety at
work, because the risk of slipping is
reduced. Easy surface cleaning and
surround protection made of highgrade polyurethane also contribute
to maximised cost savings.
Detail:
Surface
Working with Doka Xtra
The Doka Xtra floor system permits

early removal of the formwork.
Step 2:
Lower the floor slab formwork by the
new Doka Xtra heads.
Initial situation:
Slab cast with Doka Xtra formwork
Step 1:
Remove the removable folding
tripods and the intermediate props
Step 3:
Remove the transverse beams and
most of the formwork sheets.
Step 4:
Remove the longitudinal beams. As
the various system components are
removed, they are available for use
in the formwork for the next section
of the slab. The auxiliary shoring
remains in place until the concrete is
sufficiently strong.
175
Doka Floor System
References
Residential Home Schloss Pchlarn, Austria
Office Building of the Jahreszeitenverlag Publishing House, Germany
176
Allee Hotel Frankfurt, Germany
Doka Xtra
Residential Home Schloss

Pchlarn, Austria
Office Building in Hartberg,

Austria
177
Doka Floor System

[kg]
Article n
[kg]
Article n
Doka Xtra
Floor System
12.9 586086000
15.3 586087000
17.8 586088000
22.2 586089000
34.6 586090000


Galvanised
Doka Xtra head
9.7 586108000
Doka Xtra-Kopf
Galvanised
Height: 69 cm
0.77 586179000
Haltekopf H20 DF
Galvanised
Length: 19 cm
Width: 11 cm
Height: 8 cm

Federbolzen 16mm
0.25 582528000
Galvanised
Length: 15 cm

14.8 586092000
16.7 586093000
20.5 586094000
24.9 586095000
29.2 586119000


1.0 586232000
Galvanised
Height: 21 cm
Beam forming support 20
6.9 586148000
Balkenzwinge 20
Galvanised
Length: 30 cm
Height: 35 cm
Galvanised
Extension for beam forming support 60cm

Balkenaufsatz 60cm
4.4 586149000
Galvanised
Handrail clamp S
11.5 580470000
Galvanised
3.7 582768000
Galvanised
Length: 75.5 cm
Removable folding tripod
15.6 586155000
Sttzbein
Galvanised
Height: 100 cm
17.7 584373000
Galvanised
178
Doka Xtra
[kg]
Wheel-around scaffold DF
Article n
44.0 586157000
Mobilgerst DF
[kg]
Lever extension DF 1.20m
2.0 586159000
Hebelverlngerung DF 1,20m
Aluminium
Length: 195 cm
Width: 80 cm
Height: 290 cm
Powder-coated yellow
Doka beam H20 top N 2.65m
13.8 189013000
Doka-Trger H20 top N 2,65m
Varnished yellow
Permitted bending moment: 5.0 kNm
Perm. shear force: 11.0 kN
Approval by Institute of Building
Technology, Berlin. Values applicable only when formwork beams are
upright.

Doka-Fahrgerst Z
consisting of:
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)

Cross board Z 1.35m
6.7
11.3
4.1
6.5
17.5
17.0
4.0
5.1
3.0
2.8
5.3
586016000
586017000
586021000
586022000
586023000
586024000
586025000
586026000
586027000
586028000
586029000
(not illustrated)

7.1 586030000
2.5 586031000
2.5 586032000
(not illustrated)
(O) Ballast Z
Doka beam H20 top P 2.65m
Varnished yellow
upright.
Dokadur panel 21 200/50cm

Dokadur panel 21 200/50cm BS
Dokadur-Paneel 21
Aluminium

Dokadur-Paneel 27
11.0
13.8
11.0
13.8
186083000
186081000
186083100
186081100
High-grade floor-forming panels, 3ply, 21 mm, with impact-resistant

plastic surround.
For clean concrete faces with plain
surface appearance. Also available
for rental.
(not illustrated)
C
14.3 189703000
Doka-Trger H20 top P 2,65m
10.0 586033000
Article n
13.5
16.9
13.5
16.9
187170000
187168000
187170100
187168100

plastic surround.
for rental.

Galvanised
Height: 77 cm
Max. load: 1100 kg
M
L
Alu beam fork H20
2.4 586182000
Alu-Trgergabel H20
42.0 586151000
Aluminium
Length: 176 cm
Stripping lever DF 1.20m
2.7 586158000
Ausschalhebel DF 1,20m
Bolt-on castor set
33.5 586154000
Anklemm-Radsatz
consisting of:

2 pcs.
Height: 23 cm

2 pcs.
Height: 32 cm
Painted blue
Max. load: 1100 kg
179
Doka Floor System

[kg]
Stacking strap 50
3.1 586156000
Stapelgurt 50
Powder-coated, blue
Perm. strapping force: 40 kN
180
Article n
[kg]
Article n

Doka Floor System
Dokaflex 1-2-4
Wherever concrete slabs for a given

floorplan have to be cast quickly and
economically, Dokaflex 1-2-4 is the
right formwork system.
Hochdahl Arcaden, Germany
Dyckerhoff + Widmann, Dsseldorf
Dokaflex 1-2-4
The versatile hand-operated system

for floor slabs
Dokaflex 1-2-4 is the fast, versatile floor formwork for floorplans of
any shape, for beams, slab overhangs and semifinished floor elements and the ready reckoner is ideal for calculating the quantities
of materials, so there's no need for formwork planning. The free choice of formwork sheets leaves nothing to be desired when it comes to
the finished structure of the fair-face concrete.
Defined positioning grid with full flexibility in

floorplan geometry ...
for quick erection of the formwork, because the positioning points are clear
enables rapid adaptation to walls and columns by simply telescoping the
transverse and longitudinal beams
Speedy progress and simple logistics ...

because there is only a small number of matched individual components
with easily distinguishable longitudinal (3.90 m) and cross beams (2.65 m)
because the ready reckoner makes it easy to calculate the quantities needed
because dispensing with planning and preparatory operations cuts costs
by a significant margin
because the maximum spacing for longitudinal and transverse beams and
props are marked on the beams - for floor-slab thicknesses up to 30 cm
Safety and economy ...

with high-quality, durable system components
because the panels can be rented
with high-grade polyurethane surround for first-class concrete surfaces
and reduced investment costs
with non-slip surfaces for significantly enhanced safety at work
with the unique formwork beam Doka H20 top for up to three times more
durability
Every requirement for fair-faced concrete fulfilled ...

by free choice of formwork sheets
by the sealed surface of the rentable panels
183
Doka Floor System
Working with Dokaflex 1-2-4

Floor props Eurex
Floor props Eurex are type-tested to EN
1065 and are the right choice for every
application. The high load-bearing
strength is supplemented by a raft of
practical details for easy handling:
holes facilitate speedy height adjustment
Curved peg ends reduce the risk of
injury and make the props easier to
use
A special thread geometry makes the
props easy to back off even under
high loads; a few blows with a
hammer suffice
Doka beam H20 top

The Doka beam H20 top has unique end
reinforcements providing improved protection for the beam ends to prolong
useful life and minimise post-use costs.
The high level of manufacturing quality
with 100% material-strength testing ensures uniformly high product quality and
load-bearing strength for safe utilisation
in the Dokaflex system. The predefined
positioning points facilitate handling to a
significant extent. Certified by the Institut
fr Bautechnik, Berlin.
Detail:
Surface
Dokadur panels
Dokadur panels are the state of the art
for floor slab panels. Special surface
sealing with precision-metered corundum sanding means maximised use
cycles and superb-quality concrete
facing on account of significantly better
scuff resistance, plus improved safety at
work, because the risk of slipping is
reduced. Easy surface cleaning and
surround protections made of highgrade PU also contribute to maximised
cost savings.
184
Dokaflex 1-2-4
Beams
The beam forming support 20 enables the formwork for
slab beams to be set up quickly, with positioning accurate
to the millimetre. It's a simple matter of setting the beam
forming support on the transverse beam and hammering
it tight. The side formwork automatically pulls tight for
clean concrete surfaces and edges of the cast concrete
beam.
Working with Dokaflex 1-2-4
1
1
1-2-4 the numbers represent the maximum spacing for setting up Dokaflex 1-2-4. Triangular marks on the beams indicate the spacing. 1
mark represents the maximum spacing for transverse beams, 2 marks
are the maximum spacing for props, and 4 marks show the maximum
spacing for longitudinal beams.
185
Doka Floor System
References
Campus Emilie in Detmold, Germany
Vienna Skylink, Vienna International Airport, Austria
186
Red Bull World in Fuschl near Salzburg, Austria
Dokaflex 1-2-4
"Koloseo" Office Building, Slovakia
Bortolussi Pierres, France
Mosque in Duisburg, Germany
187
Doka Floor System

[kg]
Article n
[kg]
Article n
Doka Floor
Dokaflex
1-2-4
System
12.9 586086000
15.3 586087000
17.8 586088000
22.2 586089000
34.6 586090000


3.7 582768000
Galvanised
Length: 75.5 cm
Removable folding tripod

Galvanised
15.6 586155000
Sttzbein
Galvanised
Height: 100 cm
Lowering head H20
6.1 586174000
Absenkkopf H20
14.8 586092000
16.7 586093000
20.5 586094000
24.9 586095000
29.2 586119000


Galvanised
Length: 25 cm
Width: 20 cm
Height: 38 cm
4-way head H20
4.0 586170000
Vierwegkopf H20
Galvanised
Length: 25 cm
Width: 20 cm
Height: 33 cm
Galvanised

Federbolzen 16mm
0.25 582528000
Galvanised
Length: 15 cm
0.77 586179000
Haltekopf H20 DF
Galvanised
Length: 19 cm
Width: 11 cm
Height: 8 cm
Doka floor prop Eco 20 250

11.7 586134000
13.0 586135000
15.3 586136000
19.1 586137000

Height: 227 - 4010 cm

Doka-Deckensttze Eco 20
Galvanised
Perm. capacity: 20 kN at any telescoping length to NORM B 4009
U-head 12.5cm
1.2 586171000
Kopfgabel 12,5cm
Galvanised
Height: 23 cm
Bracing clamp B
1.4 586195000
Verschwertungsklammer B
Painted blue
Length: 36 cm

Galvanised
Height: 21 cm
188
1.0 586232000
Dokaflex 1-2-4
[kg]
Beam forming support 20
Article n
6.9 586148000
Balkenzwinge 20
[kg]
Galvanised
Length: 30 cm
Height: 35 cm
Extension for beam forming support 60cm

Balkenaufsatz 60cm
Article n
42.0 586151000
Galvanised
Height: 77 cm
Max. load: 1100 kg
4.4 586149000
Galvanised
Bolt-on castor set
33.5 586154000
Anklemm-Radsatz
consisting of:

Wheel-around scaffold DF
44.0 586157000
Mobilgerst DF
2 pcs.
Height: 23 cm

2 pcs.
Height: 32 cm
Aluminium
Length: 195 cm
Width: 80 cm
Height: 290 cm
Painted blue
Max. load: 1100 kg
Alu beam fork H20
2.4 586182000
Alu-Trgergabel H20
Aluminium
Length: 176 cm

Doka-Fahrgerst Z
consisting of:
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)

Cross board Z 1.35m
6.7
11.3
4.1
6.5
17.5
17.0
4.0
5.1
3.0
2.8
5.3
586016000
586017000
586021000
586022000
586023000
586024000
586025000
586026000
586027000
586028000
586029000
Stripping lever DF 1.20m
2.7 586158000
Ausschalhebel DF 1,20m
(not illustrated)

7.1 586030000
2.5 586031000
2.5 586032000
(not illustrated)
(O) Ballast Z
Lever extension DF 1.20m
2.0 586159000
Hebelverlngerung DF 1,20m
10.0 586033000
(not illustrated)
D
Aluminium

Doka-Trger H20 top N
Varnished yellow
upright.

Doka-Trger H20 top P
M
L
13.8 189013000
20.0 189017000
14.3 189703000
20.8 189707000
Varnished yellow
upright.
189
Doka Floor System

Dokadur-Paneel 21
[kg]
Article n
11.0
13.8
11.0
13.8
186083000
186081000
186083100
186081100

plastic surround.
for rental.

Dokadur-Paneel 27
13.5
16.9
13.5
16.9
3.1 586156000
Stapelgurt 50
Powder-coated, blue
Handrail clamp S
11.5 580470000
Galvanised
Handrail post 1.10m
5.6 584384000
Schutzgelnder 1,10m
Galvanised
Height: 134 cm
190
0.03 584386000
Yellow
Length: 20 cm
Diameter: 3.1 cm

Gerstrohr 48,3mm
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Galvanised
13.0 187009000
16.3 187011000
Doka-Schalungsplatte 3-SO 27mm

NORM B3023
bonding
High quality MUF synthetic-resin surface
A high quality formwork panel for all
purposes
Stacking strap 50
Grey
Length: 16.5 cm
Diameter: 2.7 cm
187170000
187168000
187170100
187168100
10.5 186009000
13.1 186011000
Article n
0.03 584385000
Steckhlse 24mm
Schraubhlse 20,0

NORM B3023
bonding
purposes
Doka formwork sheet 3-SO 27mm 200/50cm

Screw sleeve 20.0

plastic surround.
for rental.

[kg]
0.84 682002000
Galvanised
Width-across: 22 mm

Doka Floor System
Doka load-bearing
towers Staxo, d2
For high slabs and heavy loads, combinable with the superstructure
of the Doka floor systems
Staxo 100
The ultra-heavy-duty, easy-to-use load-bearing tower
made of steel, complete with built-in safety
Staxo 100 has all the tried-and-tested advantages of Staxo - robustness, ease
of use, versatility. Now a comprehensive safety package has been integrated
as well, and load-bearing strength significantly increased.
Staxo displays its strengths in combination with other formwork from the Doka
floor system: The unified superstructure
means that the same system components
can be used for a "seamless" forming
regardless of the height of the slab.
Horizontal loads have to be carried when

concrete is poured to form inclinedslabs. The load-bearing tower Staxo
dependably absorbs these loads see
documentation for dimensioning.
Load-bearing towers
The load-bearing tower d2 with a superstructure consisting of longitudinal

and transverse beams set up for casting
a slab a little over 10 m above the
existing level.
The proven load-bearing tower
The proven Doka load-bearing tower d2 also combines with all Doka floorsystem superstructures. The system is highly versatile for use in all areas of
structural engineering.
See the section entitled "Doka Load-bearing Towers" for more information on both these tower
systems.
193

Doka has put its decades of
experience on construction
projects spanning the entire
architectural spectrum into
designing a modular system
that offers the ideal climbingformwork solution.
Crane-lifted or crane-independent - the principle is invariably: ultra-high safety
standard combined with
maximised cost-effectiveness
and straightforward,
safe handling.
194
Platform SCP
The self-climbing forming and working
platform for high-rise building cores
Automatic climbing
formwork SKE
The crane-independent automatic
climbing formwork SKE - regular work
cycles and maximum efficiency for any
structure
Climbing formwork K
The tried-and-tested system for

crane-lifted climbing projects
The versatile climbing formwork made

up of folding platform and formwork
element
An innovative, modular system, with

the versatility to be used for all wall and
faade work, crane-lifted or raised by
hydraulic jacks
Guided directly by the structure, so

firmly secured to the structure in every
phase of every cycle
Regular work cycles and outstanding

versatility for all high structures
Dam formwork
Cooling-tower formwork
SK 175
The economical formwork system for

mass concrete structures
The automatic climbing formwork for

cooling towers
195
Platform SCP
RWE Gas Tower

Dortmund, Germany
Construction work by: Oevermann GmbH & Co. KG, Mnster
The platform SCP carries all the site equipment and is encased so that the crew is safe
and protected from the weather conditions,
no matter how high the structure rises
196
Platform SCP
The self-climbing forming and working platform

for high-rise building cores
The Doka platform SCP was developed specifically for the economical,
safe construction of high-rise building cores.
Once the freshly poured concrete has set, the formwork for an entire
storey is raised one lift by the powerful hydraulic cylinders.
Proven technology for professional

construction workflows ...
enables an optimised formwork concept for speedy cycles
optimises the infrastructure by integrating material containers, stair
towers and concrete-pump distributors
Working space enclosed on all sides ...

so the concrete can be poured faster, irrespective of weather conditions
for the highest standard of safety for the site personnel
Planning and engineering services by Doka experts ...

utilises the experience of Doka's centre of expertise for automatic climbing
formwork on your site
ensures an economical solution with practical project planning
The platform SCP: shown here on the

site of the Kista Science Tower in
Stockholm, Sweden.
The ideal SCP-concept for your high-rise building core

Core climbs ahead
Floor slab and walls cast in a single operation
In this method of construction, the core of the structure

(lift shafts, stairwells) climbs ahead of the other levels
this separation of the structure's components accelerates
progress and offers ideal protection against the weather
conditions.
The characteristic feature of this method of construction

is that slab and walls are cast in a single operation for
maximum speed and economy.
197
Automatic climbing
formwork SKE
Burj Dubai
Dubai, United Arab Emirates
Samsung / Besix / Arabtec J.V., Dubai
The automatic climbing formwork SKE
100 helping to drive construction work
on the world's highest building
The crane-independent climbing formwork for

structures of any shape and any height
On account of its modular design principle, the crane-independent
automatic climbing formwork SKE is an efficient solution for any
type of structure, for steady progress irrespective of weather
conditions and maximum safety for the entire construction crew.
Maximum safety in all phases of the operation ...

because the climbing scaffold is always anchored in the concrete
as hydraulic jacks lift the entire unit, there is no need for crane assistance
with wide working platforms closed on all sides
Independence from the weather conditions ...

because even large formwork assemblies can be lifted without the need for
a crane
work proceeds safely despite high winds

utilises the experience of Doka's centre of expertise for automatic climbing
formwork on your site
The angle of inclination can be adjusted

even on variable-radius structures. The
automatic climbing formwork SKE 50 on
site: Valley crossing in Crni Kal, Slovenia
199
Automatic climbing formwork SKE 50
Automatic climbing formwork SKE 100
The simplest and also the most versatile

automatic climbing system.
For high formwork scaffolds and heavy loads - so

it becomes possible to separate forming and reinforcement work. The high formwork scaffolds enable reinforcement work before forming operations.
Load-carrying capacity 5 metric tons per bracket

Ideal solution for a huge number of climbing tasks
Up to 40 automatic climbers can be lifted together
by each hydraulic unit
Primary areas of application

High-rise building cores
Building facades
Bridge piers
Bridge suspension towers
Load-carrying capacity 10 metric tons per bracket

Platform system for simultaneous work at different levels
Extremely strong brackets permit wide, variable spacing
Primary areas of application:

High-rise building cores
Bridge piers
Bridge suspension towers
Special tasks such as lifting
concrete-pump distributors
B
B
C
E
D
200
Pouring platform
Working platform
Wall formwork
Follow-up platforms D
Climbing profile
Reinforcement platform
The future looks good for the automatic climbing formwork SKE 50 plus
A brand-new, revolutionary system in the automatic climbing formwork sector ...
developed on the basis of 20 years' experience on more than 250 automatic climbing projects
all over the world
the degree of pre-assembly is high, so the formwork is quickly ready to go to work on your
construction site
offers maximum safety in combination with top-flight cost-efficiency
very easy to use , so even large-area assemblies reposition rapidly
Automatic climbing formwork at work ...
Eleven Towers at Business Bay

Dubai, United Arab Emirates
Sutong Chang Jiang Bridge, Shanghai, China
Hilton Hotel, Manchester, UK
201
Climbing formwork
Xclimb 60
Maximum cost-effectiveness in formwork for
simple geometries - the climbing formwork
Xclimb 60
An innovative, modular system for

universal use in high-rise construction
The climbing formwork Xclimb 60 can be either crane-lifted or self-climbing and
is designed for highly cost-effective, universal use in the wall-construction and
faade sector. Integrated safety as offered by the shield function, for example,
complements the enormous versatility of this system.
Intelligent modular system ...

enables universal use in wall construction and faade work as a shield,
or as a system with integrated extending platform
means that the system can be crane-lifted or used as an automatic climber
with hydraulic lifter jacks designed for manual repositioning
the high level of pre-assembly streamlines logistics and assembly on site
simplifies planning, application and handling
High safety standard ...

in every phase of every cycle, because the system is always anchored to the
structure
because lifts are guided and unaffected by weather conditions
and an encasement made of materials suited to prevailing local conditions can be
installed so that everyone working on the formwork is well protected against
adverse weather
because platforms are sized to the ideal width for practical working
Shield function and extending platform
Pouring platform
Wall formwork
Working platform
Guide profile
Follow-up platform E
203
Bridge over the Lavant valley

St. Paul im Lavanttal, Austria
Construction work by: Steiner Bau
With this climbing system, formwork and
scaffold always remain firmly attached to
the structure during the whole repositioning
by crane, which is effected in a single lift
for the entire unit
A structure-guided crane-lift climbing system

A
The climbing formwork GCS is an innovative system that

always performs very well when the situation in the field
calls for safe and speedy crane lifts. Guided directly by the
structure, so firmly secured to the structure in every phase
of every cycle.
B
C
Progress is fast ...

because a single crane lift safely repositions an entire formwork
unit on the structure
because only one positioning spot per bracket and section, so
less preparation and less work after the concrete is poured
High level of safety maintained throughout

each phase ...
because the system is continuously guided by and secured to
the structure during each successive lift
with an integrated, fully rentable ladder system enabling the
crew to move safely in the scaffold
even if wind velocities go as high as 70 km/h during the
repositioning process
High versatility ...

because bracket pitch adapts to suit the geometry of the
structure
enables reworking platforms to be secured wherever necessary
on the scaffold
in terms of pouring height: freely selectable up to 4 m
The full-size encasement round the top three levels of the building allows all
work to proceed under ideal safety conditions and unaffected by adverse
weather. The Doka extending platform enables straightforward and safe
repositioning of floor formwork, general gear and other materials.
Pouring platform
Guiding profile
Wall formwork
Ladder system
Working platform
Follow-up platform F
GCS screening system

more safety and speed for slab forming
205
Climbing formwork
MF 240
The formwork and the climbing scaffold are
interconnected and can be repositioned as a
unit in a single crane lift.
Tower luggage sorting hall
Munich International Airport, Germany
Construction work by: Walter Bau AG,
Ing. Bau, Aschheim
The crane-lifted climbing formwork for structures

of any shape and any angle of inclination
The climbing formwork MF 240 is the key to regular work cycles on
all high structures. Of straightforward design, this system can be
adapted to a very wide range of field requirements.

permits optimised adaptation to any construction project
with no more than a few individual components
easily extended to climbing formwork GCS or automatic
climbing formwork SKE 50
platforms 2.40 m wide, so plenty of space for working
quickly and in safety
Ease of operation ...
enables speedy formwork positioning and retraction

without crane
reduces crane time, because the entire unit repositions
quickly
offers speedy, precision alignment of the formwork in
all directions
On structures with vertical walls, the climbing formwork MF 240 permits

pouring sections up to 6 m high
Pouring platform
Climbing bracket MF C
Travelling unit MF
Suspended platform
207
Proven, practical adjustable inclination

The pressure spindle enables the climbing formwork MF 240 to adjust to
structures with an angle of inclination that changes for each lift
max 1
5
240,0
60,0
60,0
40,0
240,0
Vertical walls
Varying angles of wall inclination Walls with constant angle of inclination
On structures with vertical walls,

the climbing bracket MF 240 permits pouring sections up to 6 m
high.
The pressure spindle enables the

climbing formwork MF 240 to adjust to
structures with an angle of inclination
that changes for each lift
When the structure's angle of inclination is

constant, pressure struts keep the formwork
at exactly the right angle up to 15.
The climbing formwork for interior shafts

The shaft platform complete with shaft formwork
repositions quickly and easily in a single crane lift the
cost-effective system for forming interior shafts.

has telescopic shaft beams for simple adaptation to
any set of dimensions
makes assembly quick and easy
supports the installation of a follow-up platform

speedy formwork positioning and retraction
without crane
reduces crane time, because the entire unit
repositions quickly
Easy attachment ...

offers maximum safety
with platform head or pawl
208
The shaft platform repositions complete with the large-area formwork

Top 50 in a single lift.
The platform system is fully enclosed for maximum safety. The platform is
2.40 m wide, so there is plenty of space for working quickly and in safety.
Techgate Tower, Vienna, Austria
Krshegy Viaduct, Hungary
And here on the site of the Freeport LNG Terminal Project, Texas, USA, Doka climbing formwork MF 240 is again ensuring optimum
construction progress.
209

[kg]
Article n
[kg]
Article n
Doka Climbing
Climbing
formwork
System
MF 240
Climbing bracket MF240
172.1 580650000
Kletterkonsole MF240
consisting of:
Vertical waling MF 4.50m
123.8 580663000
Fahrriegel MF 4,50m
Galvanised
(A) Horizontal profile MF with handrail post
88.5 581618000
Length: 251 cm
Height: 155 cm
(B) Vertical profile MF80
44.0 580652000
Height: 213 cm
(C) Pressure strut MF long
24.7 580653000
Galvanised
Length: 252.9 cm
(D) Pressure strut MF short
Galvanised
Travelling unit MF
16.3 580654000
135.6 580655000
Fahreinheit MF
consisting of:
(A) Travelling gear MF
32.3 580656000
Galvanised
Length: 128 cm
Height: 22 cm
(B) Plumbing spindle MF 3.00m
23.0 580657000
Length: 166-229 cm
Vertical waling extension MF

Fahrriegelverlngerung MF
(C) Vertical waling MF 3.00m
76.8 580658000
41.5 580659000
Galvanised
Height: 144 cm
Galvanised
Galvanised
Vertical profile MF160
90.5 580660000
Vertikalprofil MF160
Galvanised
Height: 208 cm
Plumbing spindle MF 4.50m
46.0 580664000
Einrichtspindel MF 4,50m
Galvanised
Pressure spindle MF240
26.0 580680000
Druckspindel MF240
Galvanised
210

[kg]
Article n
Suspended platform MF75 5.00m
69.8 580667000
(A) Suspension profile MF
43.0 580668000
Hngebhne MF75 5,00m

consisting of:
[kg]
Waling-to-bracket holder
2.5 580526000
Keilriegelhalter
Galvanised
Length: 26 cm
Height: 31 cm
Height: 368 cm
(B) Screw-on access bracket MF75
Article n
19.0 580669000
Galvanised
Length: 113 cm
Height: 152 cm
(C) Distance profile MF
7.8 580670000
Length: 71 cm
Handrail clamp S
11.5 580470000
Galvanised
Galvanised
3.0 580478000
Galvanised
Height: 20 cm
Screw-on access bracket MF75

Anschraubbhne MF75
19.0 580669000
Galvanised
Length: 113 cm
Height: 152 cm
Passage
37.0 580832000
Durchstieg
Galvanised
Length: 134 cm
Width: 72 cm
Swivel plate MF
4.5 580672000
Schwenkplatte MF
Crane sling 3.50m
Galvanised
Length: 29 cm
Height: 20 cm
Starter block unit MF
8.8 580461000
Kranseilschlaufe 3,50m
Diameter: 16 cm
Max. load: 1950 kg
23.2 580678000
Grundblockriegel MF
Galvanised
Length: 143 cm
Width: 19 cm
Wind bracing MF/150F/K 6.00m
Windabspannung MF/150F/K 6,00m

Galvanised
4.7 580665000

Gerstrohr 48,3mm
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Galvanised
Wind bracing MF 6.00m
4.3 580677000
Windabspannung MF 6,00m
Galvanised
0.27 584375000
Gerstrohranschluss
Galvanised
Height: 7 cm
211

[kg]
Article n
0.84 682002000
0.71 586013000
Anschraubkupplung
Galvanised
Width-across: 22 mm
Swivel coupler 48mm
Teleskop-Schachttrger
Article n
6.5 580390000
GF-Werkzeugbox
0.73 580580000
Galvanised
Length: 30 cm
Galvanised
Width-across: 22 mm
Telescopic shaft beam 1.45-1.65m

Tool box GF
1.5 582560000
Drehkupplung 48mm
[kg]
56.0
65.0
107.5
156.5
261.0
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)
(L)
Fork wrench 13/17

Fork wrench 22/24
Fork wrench 30/32
Ring spanner 17/19
Extension 11cm
Extension 22cm
Box nut 13
Box nut 24
Box nut 30 1/2"
0.08
0.22
0.80
0.27
0.20
0.31
0.16
0.16
0.06
0.12
0.20
580577000
580587000
580897000
580590000
580581000
580582000
580583000
580598000
580576000
580584000
580575000
580686000
580687000
580688000
580689000
580690000
Galvanised
Additional tools MF
4.1 580682000
1.5 580894000
Zusatzwerkzeuge MF
consisting of:
Pawl for shaft platform
18.0 580466000
Klinke fr Schachtbhne
Galvanised
Length: 55 cm
Width-across: 19 mm
Galvanised
Length: 50 cm
(B)
(C)
(D)
(E)
(F)
Box nut 17 1/2"

Box nut 50
Extension 20cm 3/4"
0.07
0.81
0.68
0.18
0.90
580685000
581449000
580683000
580684000
581448000
Galvanised
Length: 9 cm
Width-across: 50 mm
Box for latch 20x20x15cm
2.6 580608000
Aussparungskasten 20x20x15cm
Powder-coated, blue
Plug 15.0
0.006 580609000
Verschlussstopfen 15,0
3.9 580679000
Antriebsknarre MF 3/4"
Colourless
Diameter: 1.9 cm
Main beam head
Galvanised
Length: 108 cm
14.9 580464000
Bhnenkopf
Painted blue
Length: 49 cm
212
Ratchet MF 3/4"

Jaber Al-Ahmed International Stadium, Kuwait

Construction work by: Mohammed Abdulmohsin
Al-Kharafi & Sons W.L.L., Philipp Holzmann
The Jaber Al-Ahmed International Stadium is under
construction close to the capital of Kuwait. Climbing
formwork 150 F is used in the construction of the
load-bearing "skeleton" of the stadium.
The tried-and-tested crane-lift climbing system

The climbing formwork 150 F is a proven, tried-and-tested
system, the particularly economical choice for crane-lift
climbing projects.
Sophisticated modular system with

only a few individual components ...
permits easy adaptation for all construction projects with
vertical walls
permits speedy positioning and safe anchoring at any height
offers working platforms 1.65 m wide, with 70 cm retract
distance for the formwork

reduces labour costs for formwork positioning and retraction
without crane
reduces crane time, because the entire unit repositions quickly
enables speedy erection of the formwork
D
C
Scissor-action spindles move the formwork elements quickly and easily

into position.
Pouring platform
Climbing bracket
Wall formwork
Ladder system
Scissor-action spindle C
Suspended platform F
215

[kg]
Article n
[kg]
Article n
Doka Climbing
Climbing
formwork
System
150 F
Climbing bracket 150 F
97.0 580401000
Kletterkonsole 150 F
Suspended platform 150 3.30m

Hngebhne 150 3,30m
Galvanised
Width: 173 cm
Height: 255 cm
Vertical waling 3.00m
Galvanised
84.5 580446000
Fahrriegel 3,00m
12.0 587153000
Betonierkonsole L
Painted blue
Length: 101 cm
Height: 159 cm
Galvanised
30.4 580476000
Scissor-action spindle
Galvanised
Length: 121 cm
Height: 235 cm
50.5 580455000
Scherenspindel
Galvanised
2.5 580526000
Keilriegelhalter
Handrail clamp S

Galvanised
11.5 580470000
Galvanised
Galvanised
Length: 26 cm
Height: 31 cm
49.5 580410000
4.7 580665000
3.0 580478000
Galvanised
Height: 20 cm
Crane sling 3.50m
8.8 580461000
Diameter: 16 cm
Max. load: 1950 kg
216

Gerstrohr 48,3mm
[kg]
Article n
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
[kg]
Box for latch 20x20x15cm
2.6 580608000
Aussparungskasten 20x20x15cm
Powder-coated, blue
Plug 15.0
0.006 580609000
Verschlussstopfen 15,0
Colourless
Diameter: 1.9 cm
Galvanised
Universal tool box 15.0
Universal-Werkzeugbox 15,0
0.27 584375000
Gerstrohranschluss
Galvanised
Height: 7 cm

0.84 682002000
0.71 586013000
Anschraubkupplung
Galvanised
Width-across: 22 mm
Swivel coupler 48mm
1.5 582560000
Drehkupplung 48mm
Article n
9.1 580392000
0.73 580580000
Galvanised
Length: 30 cm
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)
(L)
(M)
(N)
(O)
(P)
Fork wrench 13/17

Fork wrench 22/24
Fork wrench 30/32
Fork wrench 36/41
Ring spanner 17/19
Square nut 22
Box spanner 41
Extension 11cm
Extension 22cm
Box nut 13
Box nut 24
Box nut 30 1/2"
Positioning cone spanner 15.0 DK
0.08
0.22
0.80
1.0
0.27
0.31
0.99
0.20
0.31
0.16
0.16
0.06
0.12
0.20
0.30
580577000
580587000
580897000
580586000
580590000
580589000
580585000
580581000
580582000
580583000
580598000
580576000
580584000
580575000
580579000
Galvanised
Length: 8 cm
Width-across: 30 mm
Galvanised
Width-across: 22 mm

Teleskop-Schachttrger
56.0
65.0
107.5
156.5
261.0
580686000
580687000
580688000
580689000
580690000
Galvanised
Pawl for shaft platform
18.0 580466000
Klinke fr Schachtbhne
Galvanised
Length: 55 cm
Width-across: 19 mm
Main beam head
14.9 580464000
Bhnenkopf
Painted blue
Length: 49 cm
217
Climbing formwork K
Innsbruck Railway Station
Innsbruck, Austria
Construction work by: Alpine Mayreder,
Kematen
The climbing formwork K is an easily
assembled combination of folding
platform K and Doka beam formwork.
Climbing formwork K
The versatile climbing formwork made up

of folding platform and formwork element
The climbing formwork for low-rise buildings - totally easy
to assemble and designed for single-unit repositioning.
Climbing platform and formwork lift

together ...
dispensing with the time-consuming operation of setting down the
formwork for each lift
saving time by combining individual operations

reduces labour costs for formwork positioning and retraction
without crane
enables speedy erection of the formwork
tilting formwork for easy positioning and retraction without crane
Easy assembly ...
Only two accessories (suspended platform and adapter shoe) are

needed to combine the folding platform K with any Doka wall formwork to make the versatile climbing formwork K.
D
C
Even curved geometries can be handled with the climbing formwork K - shown
here in use during construction of the Siemens car parking facility in Dsseldorf, Germany.
Pouring platform A
Folding platform K
Wall formwork
Suspended platform E
Adapter shoe
219

[kg]
Article n
[kg]
Article n
Doka Climbing
Climbing
formwork
System
K
Doka folding platform K 3.00m

Doka-Faltbhne K
291.5 580442000
444.5 580443000
0.84 682002000
Galvanised
Width-across: 22 mm

Swivel coupler 48mm
1.5 582560000
Drehkupplung 48mm
Galvanised
Width-across: 22 mm
Folding bracket K
52.4 580441000
Faltkonsole K
Galvanised
Length: 224 cm
Height: 245 cm
Suspension head for use on suspension cone.
Connection shoe K
Hngebhne 120

Galvanised
Length: 25 cm
Width: 17 cm

60.2 580011000
68.4 580012000
79.4 580013000
Painted blue
cm
6.4 580451000
Anschlussschuh K

60.4 580048000
71.5 580050000
82.1 580052000
Painted blue
cm
44.0 580411000
52.6 580412000
Galvanised
Adjusting spindle M36
6.2 500663002
Hhenjustierspindel M36
Galvanised
Length: 31 cm
Height: 29.2 cm
Connecting pin 10cm
0.34 580201000
Galvanised
Length: 14 cm
Spring cotter 6mm

Gerstrohr 48,3mm
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
0.06 580204000
Federvorstecker 6mm
Galvanised
Length: 13 cm
2.5 580526000
Keilriegelhalter
Galvanised
Length: 26 cm
Height: 31 cm
Galvanised
Framax wedge clamp
1.5 588152000
Framax-Spannklemme
Galvanised
Length: 21 cm
220
Climbing formwork K
[kg]
Article n
Panel strut 340
30.2 588246000
(A) Prop head
3.5 588244000
Elementsttze 340
consisting of:
[kg]
30.4 580476000
Galvanised
Length: 121 cm
Height: 235 cm
2 pcs.
Galvanised
Length: 40.8 cm
Width: 11.8 cm
Height: 17.6 cm
(B) Prop shoe
Article n
2.1 588245000
Galvanised
Length: 20 cm
Width: 11 cm
Height: 10 cm
14.2 588247000
Galvanised
7.2 588248000
Length: 80 - 130 cm
Galvanised
Framax bracket 90
12.5 588167000
Framax-Konsole 90
Galvanised
Width: 103 cm
Height: 185 cm
3.7 582768000
Galvanised
Length: 75.5 cm
Handrail clamp S
11.5 580470000
Galvanised
Star screw
0.75 580425000
Sternschraube
Galvanised
Length: 17 cm

Galvanised
4.7 580665000
3.0 580478000
Galvanised
Height: 20 cm
0.27 584375000
Gerstrohranschluss
Pin for folding bracket A
Galvanised
Height: 7 cm
0.29 500403330
Steckbolzen fr Faltkonsole A
Galvanised
Length: 16 cm


Betonierkonsole L
12.0 587153000
Painted blue
Length: 101 cm
Height: 159 cm
15.0 588620000
221

[kg]
Passage
Article n
37.0 580832000
Durchstieg
Galvanised
Length: 134 cm
Width: 72 cm
9.1 580392000
0.73 580580000
Galvanised
Length: 30 cm
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)
(L)
(M)
(N)
(O)
(P)
Fork wrench 13/17

Fork wrench 22/24
Fork wrench 30/32
Fork wrench 36/41
Ring spanner 17/19
Square nut 22
Box spanner 41
Extension 11cm
Extension 22cm
Box nut 13
Box nut 24
Box nut 30 1/2"
Galvanised
Length: 8 cm
Width-across: 30 mm
222
0.08
0.22
0.80
1.0
0.27
0.31
0.99
0.20
0.31
0.16
0.16
0.06
0.12
0.20
0.30
580577000
580587000
580897000
580586000
580590000
580589000
580585000
580581000
580582000
580583000
580598000
580576000
580584000
580575000
580579000
[kg]
Article n

Dam formwork
Leibis/Lichte River dam, Germany

Construction work by: ARGE Talsperre
Leibis/Lichte
Dam formwork
The economical formwork system for

mass concrete structures
High loadability and safety are the chief characteristics of this
dam formwork. There is a choice of two systems with different
load-carrying capacity ratings to suit each mass concrete
structure.
A practical system ...

designed for compatibility with all Doka framed formwork and beam
formwork and steel formwork
in two versions with load capacities of 150 or 220 kN
both versions enable the formwork to tilt; with system D22 formwork is
even retractable for special requirements
makes for highly efficient work practices
Speed away from the first block ...

with parts of the dam formwork
reduces adaptation work, which always costs time and money
The dam formwork D15 can be used for
vertical or inclined walls - this photo
shows the construction of the Bostanj
hydroelectric dam in Slovenia
Working platforms 1.70 m or 2.40 m wide ...

offer a high level of safety and permit fast proceeding
can be quickly assembled and used as complete sets comprising pouring
and reworking platforms
D15
D22
The system D 15 is designed for block heights up to 3.00 m

and tensile forces of the anchor of up to 150 kN.
The working platform is 1.70 m in width.
The system D 22 is designed for block heights up to 4.00 m

and tensile forces of the anchor of up to 220 kN.
The working platform is 2.4 m in width.
B
B
C
Pouring platform
Wall formwork
Dam bracket
Follow-up platform D
225

[kg]
Article n
[kg]
Article n
87.6
119.7
115.5
154.5
580632000
580638000
580613000
580615000
Doka formwork
Dam
Climbing System
Cantilever bracket D15 K

Sperrenkonsole D15 K
136.4 580630000
Painted blue
Width: 166 cm
Cantilever bracket D15/3

Sperrenkonsole D15/3
Vertical waling D15 3.00m U120

Sperrenriegel D
Painted blue
170.0 580631000
Painted blue
Width: 215 cm
Spindle strut D15 3.00m
38.0 580633000
Spindelstrebe D15 3,00m
Painted blue
Cantilever bracket D22 K

Sperrenkonsole D22 K
190.0 580610000
52.6 580616000
Painted blue
Painted blue
Width: 189 cm
60.0 580617000
Painted blue
Cantilever bracket D22 F

Sperrenkonsole D22 F
209.6 580611000
Painted blue
Width: 237 cm
Swivel bearing plate D15
20.8 580634000
Gelenkaufsatz D15
Painted blue
Length: 43.5 cm
Height: 22.8 cm
Swivel bearing plate D15 S
18.5 580635000
Gelenkaufsatz D15 S
Painted blue
Length: 36.8 cm
Height: 22.4 cm
226
Dam formwork
[kg]
Swivel bearing plate D22
Article n
30.0 580618000
Gelenkaufsatz D22
[kg]
Starter block unit D22
Swivel bearing plate D22 S
80.0 580622000
Grundblockriegel D22
Painted blue
Length: 52 cm
Height: 27 cm
Article n
Painted blue
Length: 147 cm
26.0 580624000
Gelenkaufsatz D22 S
Painted blue
Length: 45 cm
Height: 27 cm
Anchor waling 1.95m

Anchor waling 2.95m
76.3 580545000
110.0 580546000
Ankerriegel
Painted blue
Suspended platform D15/D22
47.6 580620000
(A) Suspension profile D15/D22
28.6 580621000
Hngebhne D15/D22
consisting of:
Height: 260 cm
(B) Screw-on access bracket MF75
19.0 580669000
Galvanised
Length: 113 cm
Height: 152 cm
Travelling profile D22
20.0 580619000
Fahrprofil D22
Galvanised
Length: 114 cm
Galvanised
Retraction set D15
21.0 580637000
Rckfahrset D15
Galvanised
Length: 114 cm
Waling-to-bracket holder D22

Keilriegelhalter D22
2.7 580623000
Galvanised
Length: 31 cm
Height: 31 cm

Anschraubbhne MF75
19.0 580669000
Galvanised
Length: 113 cm
Height: 152 cm
Handrail clamp S
11.5 580470000
Galvanised
Swivel plate MF
4.5 580672000
Schwenkplatte MF
Galvanised
Length: 29 cm
Height: 20 cm
Passage
37.0 580832000
Durchstieg
Galvanised
Length: 134 cm
Width: 72 cm
Starter block unit D15
48.2 580636000
Grundblockriegel D15

Gerstrohr 48,3mm
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Galvanised
Painted blue
Length: 145 cm
227

[kg]
Article n
0.84 682002000
0.71 586013000
Anschraubkupplung
Galvanised
Width-across: 22 mm
Swivel coupler 48mm
1.5 582560000
Drehkupplung 48mm
Galvanised
Width-across: 22 mm
Ratchet MF 3/4"
3.9 580679000
Antriebsknarre MF 3/4"
Galvanised
Length: 108 cm
Tool box GF
GF-Werkzeugbox
6.5 580390000
0.73 580580000
Galvanised
Length: 30 cm
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)
(L)
Fork wrench 13/17

Fork wrench 22/24
Fork wrench 30/32
Ring spanner 17/19
Extension 11cm
Extension 22cm
Box nut 13
Box nut 24
Box nut 30 1/2"
0.08
0.22
0.80
0.27
0.20
0.31
0.16
0.16
0.06
0.12
0.20
580577000
580587000
580897000
580590000
580581000
580582000
580583000
580598000
580576000
580584000
580575000
Additional tools MF
4.1 580682000
1.5 580894000
Zusatzwerkzeuge MF
consisting of:
Galvanised
Length: 50 cm
(B)
(C)
(D)
(E)
(F)
Box nut 17 1/2"

Box nut 50
Extension 20cm 3/4"
Galvanised
Length: 9 cm
Width-across: 50 mm
228
0.07
0.81
0.68
0.18
0.90
580685000
581449000
580683000
580684000
581448000
[kg]
Article n

Cooling-tower formwork
SK 175
Herne Cooling Tower

Herne, Germany
The cooling-tower formwork SK 175
produces concrete structures with
clean, smooth surfaces: Extra-highprecision joins prolong the usable
lifespan of a cooling tower and facilitate the subsequent application of
protective coatings.
Cooling-tower formwork SK 175
The automatic climbing formwork for

cooling towers
The cooling-tower formwork is a fully mechanised, automatic-climbing
large-area formwork. It maximises rationalisation and minimises manual
labour - a short familiarisation period is all that is necessary to achieve a
one-day cycle for pouring sections
Proven, practical design ...

ensures that the units are repositioned without any crane assistance
simplifies cleaning of the formwork, with 60 cm retraction
enables the entire scaffold to be adapted to the angle of inclination by turning a single,
central spindle
expedites reinforcing work, because the scaffold has integrated reinforcement holders
High level of safety ...

even when the wind blows strongly well above ground level, because firmly anchored
to the structure in all phases
with telescopic working platforms - they are gapless even when climbing is in
progress, so the working environment remains safe
up to
Pours
iglhet
e
h
n
i
c
1.i5n amone-day cy

utilise the experience of Doka's centre of expertise for automatic climbing formwork
on your site
ensure an economical solution with practical project planning
Cooling-tower formwork in the field:

Kalinin Cooling Tower, Russia
Spindle for adjusting to angle of inclination A

Reinforcement holder
231
Doka Load-Bearing Towers

If your project entails
high shoring or heavyduty loads, or you need
shoring for tunnel
formwork, or forming
wagons for composite
steel-concrete
bridging, or singlesided wall formwork,
Doka load-bearing
towers will keep your
formwork costs down.
Staxo 100
Staxo
d2
The ultra-heavy-duty,
easy-to-use load-bearing
tower made of steel,
complete with built-in
safety
The robust, easy-to-use

load-bearing tower made
of steel
The proven load-bearing

tower made of steel
Max. loads per leg*
100 kN (with basic frame

0.90 and 1.20 m)
70 kN
60 kN
Integral
connectors
Yes
Yes
No
Bracing
(standard use)
Diagonal cross
Diagonal cross
Horizontal braces and

diagonal braces
Material
Steel
Steel
Steel
Yes
Yes
Yes
Areas of application
232
precise dimensions as per user information brochure
SL-1
Composite forming
carriage
Bridge edge beam

formwork
The heavy-duty system,

highly adaptable for
tunnelling
The high-efficiency solution for composite steelconcrete bridges
The quick, easily handled

or ready-to-use, movable
bridge edge beam formwork
For safety with singlesided formwork
233
Load-bearing tower Staxo

The high stability and versatility of the loadbearing tower Staxo ensure high equipment
utilisation on the construction site. For speedy
progress and minimal crane usage.
Nove Spojeni, Prague, Czech Republic
SS a.s. Prague
Load-bearing tower Staxo 100
Staxo 100
The ultra-heavy-duty, easy-to-use load-bearing tower
made of steel, complete with built-in safety
Staxo 100 has all the tried-and-tested

advantages of Staxo - robustness, ease
of use, versatility. Now a comprehensive
safety package has been integrated as
well, and load-bearing strength significantly increased.
ing
-bear
Load ty up to
ci
capa
N/leg
k
0
0
1
Maximum safety ...

from ladders with non-slip rungs integrated
into the frames
from drop-in assembly battens 60 cm wide,
with and without passage
from advancing guard rails for upright
installation and removal
from defined attachment points for
safety gear
Maximum versatility...
from the third leg
from two new diagonal braces
(0.60 m and 3.00 m)
from screw jack 70 top
from compatibility with Staxo
Maximum load-bearing capacity ...

up to 100 kN/leg
235
The Staxo 100 system

Staxo 100 frame
Extremely strong, galvanised
steel frame for straightforward
height adjustment in a 30 cm
grid; choice of three heights 0.90,
1.20 and 1.80 m
Frame pitch with diagonal braces
from 0.60 to 3.00 m adjustable in
steps of 50 cm
Reliably withstands horizontal
forces such as wind loads
Integrated next-lift frame adapters
for ergonomic handling even high
above the ground - no tools required
Integrated ladders with non-slip
rungs integrated into the frames
and drop-in assembly battens
support safe assembly and
disassembly
Defined attachment points for
safety gear
Diagonal cross
Timesaving integration of horizontal
and diagonal braces in a single
component
Different lengths for variable frame
spacing (0,60 to 3,00 m)
Colour clips and stamping for
clear marking of the lengths
Safe assembly with captive gravity
catches
Gravity catches
Gravity catches integrated into
the basic frames make the
diagonal crosses easy to secure.
Automatic latching to prevent
unintended release.
236
Load-bearing tower Staxo 100
Working with Staxo 100 and Staxo

Assembly
New locking spring
Height adjustment
Setting the next lift is

always quick and safe:
no time is lost looking
for parts, because the
locking springs (1), (3)
and connecting sleeves
(2) are captive, integrated into the frames.
The new plastic element integrated into the locking spring

is a highly practical feature
for ...
more durability, thanks to
the shock-absorbing
function
more protection against
accidental opening, even
though less pressure is
needed to operate the
mechanism
uniform actuating force,
remaining constant over
the entire life cycle
better seating in the
tubular upright
Screw-jack U-heads and

screw jack feet permit
precision height adjustment to the millimetre,
even under high loads.
When maximum versatility is needed the components of choice are the
screw jack 70 top and
heavy-duty screw jack feet
70 or 130 (70 and130 cm
extended length, respectively).
There are only a few individual parts, they are

all lightweight and easy
to handle, a major benefit for anyone working
high above the ground.
NEW
Repositioning
Stair tower
Staxo 100 or Staxo can be used to assemble ready-made formwork

tables for jobs that call for repositioning. The tower can be moved
quickly and easily to the next position using the shifting carriage
TG or shifting gear TG for forklifts or with a shifting winch and
wheels - no disassembly, so costs are saved.
The Staxo stair tower can be erected quickly using 1.20 m Staxo 100
or Staxo frames and pre-assembled aluminium stairway elements.
For speedy and safe access, even high above the ground.
237
Staxo
The robust, easy-to-use load-bearing tower made of steel
Staxo is a high-strength load-bearing tower made of robust steel
frames for high shoring and heavy loads. Integrated connectors for
rapid assembly. This modern load-bearing tower system comprises
only a few individual parts and is extremely versatile. A comprehensive range of safety accessories completes the system.
ing
-bear
Load ty up to
ci
capa
/leg
70 kN
Highly stable and highly versatile ...

with 1.52 m wide frame with non-buckling vertical sections
with 50 cm grid for setting the frame spacing
with the tower unit's large footprint
because horizontal loads are safely dissipated
Speedy assembly, even when the towers are high ...

because there are only a few individual parts, they are light and easy to
handle
because the vertical connectors are integrated, without loose parts
or add-ons
with drop-in assembly battens and integrated climbing rungs
Less crane time needed ...

because the towers can be pre-assembled on the flat, then hoisted
into position
with shifting carriages for horizontal repositioning
Large-area formwork tables constructed with Staxo can be freely combined with Doka tableforms for projects such as administrative
buildings and multi-storey parking lots. This combination affords unsurpassed versatility for speedy construction progress. The stair tower,
too, is from the Staxo system.
238
References
In the construction of industrial plants, tunnels and power plants,

Staxo is the ideal load-bearing tower for even the trickiest applications. The variable frame spacing means optimum adaptation to
floorplan and carrying capacity
Scaffold sections can be preassembled on the flat and easily

hoisted into position with a crane.
Staxo is ideal for high-shoring formwork and can be erected very

quickly. In addition to high vertical loads, these structures can also
withstand horizontal forces.
Staxo and elements of the large-area formwork Top 50 combine to

form large-area movable units that can be repositioned without
wasting time on disassembly.
239

[kg]
Article n
[kg]
Article n
Doka Load-bearing
Load-bearing
tower Towers
Staxo
Staxo 100 frame 1.80m

37.3 582300000
28.5 582301000
24.0 582302000
Staxo 100-Rahmen
Heavy duty screw jack 70 top

Lastspindel 70 oben
9.5 582327000
Height: 106 cm
Galvanised
Split nut B
2.0 582634000
Spannmutter B

3.4
4.1
5.2
5.7
6.6
8.0
4.2
10.0
4.6
5.7
6.1
6.9
8.3
10.2
6.1
6.9
7.3
7.8
9.1
11.1
Diagonalkreuz
582322000
582772000
582773000
582627000
582774000
582775000
582323000
582324000
582610000
582612000
582628000
582614000
582616000
582325000
582620000
582622000
582629000
582624000
582626000
582326000
Galvanised
The split nut B must not be opened
until the heavy-duty screw jack has
had the load taken off it.
Clamping plate for U-head
2.0 502709030
Klemmplatte fr Gabelkopf
Galvanised
Length: 24 cm
Width: 9 cm
Wing nut 15.0
0.31 581961000
Flgelmutter 15,0
Galvanised
Length: 10 cm
Height: 5 cm
Width-across: 27 mm
1.6: 120 kN
195 kN)
Galvanised
Locking rod 15.0 330mm
0.48 582641000
Quetschteil 15,0
Galvanised
Width-across: 24 mm
of fracture!
Staxo wedge support WS10

U-head D
6.7 582709000
Gabelkopf D
8.7 582796000
Staxo-Keilauflager WS10
Galvanised
Length: 31 cm
Width: 15 cm
Height: 23 cm
Galvanised
Length: 20 cm
Width: 22 cm
Height: 37 cm
Wedge for screw jack ..... %
0.46 176071000
Spindelkeil ..... %
4-way screw-jack head
Length: 20 cm
Width: 16 cm
10.4 582638000
Vierwegkopfspindel
Galvanised
Height: 86 cm
Screw jack foot
9.0 582637000
Fuspindel
Galvanised
Height: 69 cm
Screw jack U-head
9.2 582636000
Kopfspindel
Galvanised
Height: 74 cm
240

[kg]
Heavy duty screw jack 70
Article n
8.8 582639000
Lastspindel 70
[kg]
Extension Eurex 60 2.00m
18.0 582651000
Verlngerung Eurex 60 2,00m
Galvanised
Height: 101 cm
During shifting, this must be pushed
up into the frame and secured.
Article n
Powder-coated, blue
Aluminium
Length: 250 cm
13.0 582711000
Lastspindel 130
Galvanised
Height: 173 cm
Coupler Eurex 60
8.6 582652000
Kupplungsstck Eurex 60
Aluminium
Length: 100 cm
Diameter: 12.8 cm
U-head Eurex 60
2.9 582656000
Gabelkopf Eurex 60
Staxo 100-single leg 1.80m

22.7 582303000
19.5 582304000
18.0 582305000
Staxo 100-Einzelstiel
Galvanised
Length: 22 cm
Width: 20 cm
Height: 12 cm
4-way head Eurex 60
4.5 582655000
Vierwegkopf Eurex 60
Galvanised
Galvanised
Length: 25 cm
Width: 21 cm
Height: 21 cm
Plumbing strut Eurex 60 550
42.5 582658000
Justiersttze Eurex 60 550

Doka-Deckensttze Eurex 60 550
Powder-coated, blue
Aluminium
47.0 582650000
Aluminium
Perm. capacity: 60 kN at any telescoping length
7.1 582665000
Galvanised
Height: 50 cm
241

[kg]
Connector Eurex 60
Article n
3.9 582657000
Verbindungsstck Eurex 60
[kg]
Sttzbein 1,20m
Galvanised
Length: 15 cm
Width: 15 cm
Height: 30 cm
Plumbing strut shoe Eurex 60

Justiersttzenfu Eurex 60
Drehkupplung 48mm Eurex 60
20.5 586145000
Galvanised
Height: 120 cm
8.5 582660000
Galvanised
Length: 31 cm
Width: 12 cm
Height: 33 cm
Swivel coupler 48mm Eurex 60
Article n

0.31 588631000
Galvanised
Length: 18 cm
1.0 582654000
Galvanised
Width-across: 22 mm
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm

Galvanised
Diameter: 1.6 cm
18.2 588296000
Galvanised
Assembly batten 60/100cm

Montagebelag
10.0
12.0
14.5
18.5
23.0
582306000
582307000
582308000
582309000
582310000
10.0
12.0
14.5
18.5
23.0
582311000
582312000
582313000
582314000
582315000
Aluminium

33.3 588297000
Galvanised
Assembly batten 60/100cm with manhole

Montagebelag mit Durchstieg
Aluminium
Staxo 100 front railing
12.0 582316000
Staxo 100-Stirngelnder
Galvanised
Length: 140 cm
Height: 152 cm
3.7 582768000
Galvanised
Length: 75.5 cm
242
Staxo 100 side railing 100

Staxo 100-Seitengelnder
[kg]
Article n
13.0
14.5
16.0
17.5
19.0
582317000
582318000
582319000
582320000
582321000
[kg]
Article n
Rafter plate right
0.09 582521000
Rafter plate left
0.09 582522000

Sparrenpfettenanker
Galvanised
Length: 17 cm
Galvanised
Height: 152 cm
Handrail post 1.50m
12.4 582754000
Gelnder 1,50m
Galvanised

Gerstrohr 48,3mm
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Handrail clamp S
11.5 580470000
Galvanised
Galvanised
Transition swivel coupler 48/76mm
bergangsdrehkupplung 48/76mm
Galvanised
Width-across: 22 mm
Swivel coupler 48mm
1.9 582563000
Handrail post DF
15.0 586076000
Steckgelnder DF
Galvanised
Height: 142 cm
1.5 582560000
Drehkupplung 48mm
Galvanised
Width-across: 22 mm
17.7 584373000
Galvanised
Normal coupler 48mm
1.2 682004000
Normalkupplung 48mm
Galvanised
Width-across: 22 mm
Pin coupling 60mm
1.0 582546000
Zapfenkupplung 60mm

Galvanised
Height: 7 cm
Lifting rod 15.0

Brace stirrup 8
Spannbgel 8
0.27 584375000
Gerstrohranschluss
Galvanised
Width-across: 22 mm
2.7 582751000
Galvanised
Width: 19 cm
Height: 46 cm
Width-across: 30 mm
of fracture!
Umsetzstab 15,0
1.9 586074000
Painted blue
Height: 57 cm
of fracture!
243

[kg]
Article n
1.8 586073000
Jochplatte 15,0
[kg]
Heavy duty wheel 15kN
Abspannung fr Traggerste
33.0 582575000
Schwerlastrad 15kN
Painted blue
Height: 41 cm
Max. load: 1500 kg
Galvanised
Length: 17 cm
Width: 12 cm
Height: 11 cm
Bracing for load-bearing towers
11.6 582795000
Galvanised
Painted blue
Tie rod 15.0mm non-treated .....m
(art. no.: 581873000) not included
Double wheeled transporter
5.0 582558000
Zweirad-Transportroller
Painted blue
Width: 57 cm
Shifting carriage TG
168.0 582778000
Hubwagen TG
Spindle connecting plate T
Galvanised
Length: 99 cm
Width: 152 cm
Height: 148 cm
Max. load: 1000 kg
3.1 584371000
Spindellasche T
Galvanised
Width: 20 cm
Height: 25 cm
Article n
0.003 588180000

Blue
Diameter: 3 cm
Fork lift shifting device TG
81.0 582797000
Umsetzgert TG fr Stapler
Winch 70
Galvanised
Length: 60 cm
Width: 113 cm
Height: 52 cm
31.0 582779000
Zahnstangenwinde 70
Painted blue
Height: 126 cm
Max. load: 1000 kg
Only wheel tableforms when the
toothed rack has been retracted!
Winch 125
63.8 582780000
Zahnstangenwinde 125
Painted blue
Height: 189 cm
Max. load: 1500 kg
38.9 580007000
Connecting pin 10cm
0.34 580201000
Mehrzweckriegel WS10 Top50 2,00m

Painted blue
cm
Galvanised
Length: 14 cm
Spring cotter 6mm

Staxo/d2 adapter frame
14.1 582781000
Staxo/d2-Adapter
Painted blue
Length: 37 cm
Width: 36 cm
Height: 36 cm
Galvanised
Length: 13 cm
Pallet for Staxo/Aluxo

Doka-Traggerstpalette
Solid tire wheel
34.5 582573000
Vollelastikrad
Painted blue
Height: 45 cm
Max. load: 1000 kg
244
0.06 580204000
Federvorstecker 6mm
64.6 582783000
Galvanised
Length: 180 cm
Width: 120 cm
Height: 29 cm
Max. load: 700 kg

[kg]
Article n
42.0 586151000
[kg]
Access support 250
Bolt-on castor set
Galvanised
Height: 238 cm
33.5 586154000
Anklemm-Radsatz
consisting of:
Access railing 250

Galvanised
Length: 255 cm
Height: 117 cm

2 pcs.
Height: 32 cm
36.5 582675000
Einstiegsgelnder 250
2 pcs.
Height: 23 cm
12.6 582674000
Einstiegsadapter 250
Galvanised
Height: 77 cm
Max. load: 1100 kg
Article n
Painted blue
Max. load: 1100 kg
Stair tower-set
Anchoring shoe for stair tower
Alu stair bracket 250
33.2 582670000
Alu-Treppenlauf 250
Ankerschuh fr Treppenturm
3.4 582680000
Galvanised
Length: 22 cm
Width: 12 cm
Height: 22 cm
Aluminium
Length: 263 cm
Width: 80 cm
Height: 112 cm

Staxo frame 1.80m
Staxo frame 1.20m
Staxo frame 0.90m
Inner railing 250
7.0 582671000
Innengelnder 250
32.9 582769000
23.0 582770000
19.0 582771000
Staxo-Rahmen
Galvanised
Galvanised
Height: 155 cm
Outer railing 250
19.5 582672000
Auengelnder 250
Galvanised
Length: 255 cm
Height: 111 cm

4.2
5.9
7.5
9.7
Montagebelag
582630000
582631000
582632000
582633000
Aluminium
Landing railing 250
6.3 582673000
Podestgelnder 250
Galvanised
Length: 160 cm
Height: 48 cm
245
The load-bearing tower d2 is the
economical falsework solution for
bridge-building whenever high loads
have to be carried and extra stability
is a major requirement, for example
because of horizontal forces such as
wind loads.
Flyover at customs yard
N3/015 and 017, Switzerland
Meier und Jggi AG, Zofingen
The proven load-bearing tower

made of steel
The proven Doka load-bearing tower d2 combines with all Doka
floor-system superstructures. The system's characteristics include
easy erection and enormous versatility in building construction and
structural engineering.
Straightforward handling accelerates progress

because the parts are lightweight
because the basic frames stack easily
because assembly is easy, no tools required
ing
-bear to
d
a
o
L
p
city u
capa
/leg
60 kN
High versatility...
because the 1.52 m wide frames offer enormous stability
because the frame spacing is variable and can be matched to any set of
requirements
247
The d2 system
d2 frame
Solid, galvanised steel frame for
straightforward height adjustment
in a 30 cm grid; choice of three
heights 0.90, 1.20 and 1.80 m
Frame spacing with horizontal and
diagonal crosses from 1.00 to
2.50 m in 25 cm grid
Reliably withstands horizontal
forces such as wind loads
Height adjustment
Screw-jack U-spindles and screw-jack feet ensure fast height

adjustment accurate to the millimetre even under load.
Each screw jack has a handle, so it is easily secured to

the basic frame.
Erection / repositioning
Combination with floor props and Dokaflex
Load-bearing towers d2 are easy to erect and easy to reposition.

High towers are pre-assembled on the flat and hoisted in multi-lift
units into position by crane.
Load-bearing towers d2 combine readily with beam

forming supports and Dokaflex to make slab beams.
248
References
Falsework
Heavy slabs
Building falsework for bridges or profiled slabs is quick and economical with load-bearing towers d2.
High decks
Diagonal braces of different lengths allow the frames to be spaced

so that the structure is ideally dimensioned to carry the load.
d2 floor table
Frames connect easily with couplers and spring-locked connecting

pins, so safe load-bearing towers can be erected quickly and
easily to any height.
For multiple use load-bearing towers d2 can be combined to a

tableform.
249

[kg]
Article n
[kg]
Article n
3.4
4.1
5.2
5.7
6.6
8.0
4.2
10.0
4.6
5.7
6.1
6.9
8.3
10.2
6.1
6.9
7.3
7.8
9.1
11.1
582322000
582772000
582773000
582627000
582774000
582775000
582323000
582324000
582610000
582612000
582628000
582614000
582616000
582325000
582620000
582622000
582629000
582624000
582626000
582326000
Doka Load-bearing
Load-bearing
tower Towers
d2
Basic frame d2 0.90m

21.0 582703000
24.1 582701000
32.8 582702000
Grundrahmen d2
Galvanised
Coupler
0.57 582527000
Kupplungsstck

Diagonalkreuz
Galvanised
Galvanised
Height: 27 cm

Federbolzen 16mm
0.25 582528000
Galvanised
Length: 15 cm
Horizontal brace d2 100

1.6
1.9
2.3
2.7
3.0
3.4
3.8
Horizontalstrebe d2
582730000
582731000
582732000
582733000
582734000
582735000
582736000
4-way screw-jack head
10.4 582638000
Vierwegkopfspindel
Galvanised
Height: 86 cm
Galvanised
Screw jack U-head
9.2 582636000
Kopfspindel
Diagonal brace d2 9.100

2.0
2.2
2.6
3.0
3.3
5.9
6.8
2.2
2.5
2.9
3.1
3.5
6.0
6.7
3.0
3.3
5.8
6.1
6.4
6.9
7.4
Diagonalstrebe d2
Galvanised
582740000
582741000
582742000
582743000
582744000
582745000
582746000
582712000
582713000
582714000
582715000
582716000
582717000
582718000
582720000
582721000
582722000
582723000
582724000
582725000
582726000
Galvanised
Height: 74 cm
Heavy duty screw jack 70 top

Lastspindel 70 oben
9.5 582327000
Height: 106 cm
U-head D
6.7 582709000
Gabelkopf D
Galvanised
Length: 20 cm
Width: 22 cm
Height: 37 cm
Clamping plate for U-head
2.0 502709030
Klemmplatte fr Gabelkopf
Galvanised
Length: 24 cm
Width: 9 cm
250
[kg]
Wing nut 15.0
Article n
0.31 581961000
Flgelmutter 15,0
Galvanised
Length: 10 cm
Height: 5 cm
Width-across: 27 mm
1.6: 120 kN
195 kN)
Locking rod 15.0 330mm
0.48 582641000
Quetschteil 15,0
Galvanised
Width-across: 24 mm
of fracture!
Screw jack foot
[kg]
Wedge for screw jack ..... %
Article n
0.46 176071000
Spindelkeil ..... %
Length: 20 cm
Width: 16 cm
Staxo wedge support WS10
8.7 582796000
Staxo-Keilauflager WS10
Galvanised
Length: 31 cm
Width: 15 cm
Height: 23 cm

4.2 582630000
7.5 582632000
9.7 582633000
Montagebelag
Aluminium
9.0 582637000
Fuspindel
Galvanised
Height: 69 cm
8.8 582639000
Lastspindel 70
Galvanised
Height: 101 cm
13.0 582711000
Lastspindel 130
Galvanised
Height: 173 cm

Gerstrohr 48,3mm
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Galvanised

0.84 682002000
0.71 586013000
Anschraubkupplung
Galvanised
Width-across: 22 mm
Swivel coupler 48mm
1.5 582560000
Drehkupplung 48mm
Galvanised
Width-across: 22 mm
Split nut B
2.0 582634000
Spannmutter B
Galvanised
The split nut B must not be opened
until the heavy-duty screw jack has
had the load taken off it.
Normal coupler 48mm
1.2 682004000
Normalkupplung 48mm
Galvanised
Width-across: 22 mm
3.7 582768000
Galvanised
Length: 75.5 cm
Transition swivel coupler 48/60mm
bergangsdrehkupplung 48/60mm
Galvanised
Width-across: 22 mm
1.5 582561000
251

[kg]
Transition angle coupler 48/60mm
bergangsnormalkupplung 48/60mm
Galvanised
Width-across: 22 mm
Article n
1.6 582562000
[kg]
0.27 584375000
Gerstrohranschluss
Galvanised
Height: 7 cm
Lifting rod 15.0

Pin coupling 60mm
1.0 582546000
Zapfenkupplung 60mm
Painted blue
Height: 57 cm
of fracture!
2.7 582751000
Spannbgel 8
Galvanised
Width: 19 cm
Height: 46 cm
Width-across: 30 mm
of fracture!
Rafter plate right
0.09 582521000
Rafter plate left
0.09 582522000

Sparrenpfettenanker
1.8 586073000
Jochplatte 15,0
Galvanised
Length: 17 cm
Width: 12 cm
Height: 11 cm
Bracing for load-bearing towers

Abspannung fr Traggerste
11.6 582795000
Galvanised
Painted blue
(art. no.: 581873000) not included
Galvanised
Length: 17 cm
Handrail post 1.50m
1.9 586074000
Umsetzstab 15,0
Galvanised
Width-across: 22 mm
Brace stirrup 8
Article n
12.4 582754000
Gelnder 1,50m
Galvanised
0.003 588180000

Blue
Diameter: 3 cm
Winch 70
Handrail clamp S
11.5 580470000
Zahnstangenwinde 70
Painted blue
Height: 126 cm
Max. load: 1000 kg
Galvanised
Winch 125
Zahnstangenwinde 125
17.7 584373000
Galvanised
252
31.0 582779000
63.8 582780000
Painted blue
Height: 189 cm
Max. load: 1500 kg
[kg]
Staxo/d2 adapter frame
Article n
14.1 582781000
Staxo/d2-Adapter
[kg]
Spring cotter 6mm
0.06 580204000
Federvorstecker 6mm
Galvanised
Length: 13 cm
Painted blue
Length: 37 cm
Width: 36 cm
Height: 36 cm

Solid tire wheel
34.5 582573000
Vollelastikrad
47.0 582650000
Aluminium
Painted blue
Height: 45 cm
Max. load: 1000 kg
Heavy duty wheel 15kN
Article n
33.0 582575000
Schwerlastrad 15kN
Painted blue
Height: 41 cm
Max. load: 1500 kg
Double wheeled transporter
5.0 582558000
Zweirad-Transportroller
Painted blue
Width: 57 cm
18.0 582651000
Shifting carriage TG
168.0 582778000
Hubwagen TG
Powder-coated, blue
Aluminium
Length: 250 cm
Galvanised
Length: 99 cm
Width: 152 cm
Height: 148 cm
Max. load: 1000 kg
Fork lift shifting device TG
81.0 582797000
Umsetzgert TG fr Stapler
Galvanised
Length: 60 cm
Width: 113 cm
Height: 52 cm
Coupler Eurex 60
8.6 582652000
Aluminium
Length: 100 cm
Diameter: 12.8 cm
U-head Eurex 60
2.9 582656000
Gabelkopf Eurex 60
38.9 580007000

Painted blue
cm
Connecting pin 10cm
Galvanised
Length: 22 cm
Width: 20 cm
Height: 12 cm
4-way head Eurex 60
4.5 582655000
Vierwegkopf Eurex 60
Galvanised
Length: 25 cm
Width: 21 cm
Height: 21 cm
0.34 580201000
Galvanised
Length: 14 cm
253

[kg]
Plumbing strut Eurex 60 550
Article n
42.5 582658000
Justiersttze Eurex 60 550
[kg]
Powder-coated, blue
Aluminium
Article n
33.3 588297000
Galvanised

Sttzbein 1,20m
20.5 586145000
Galvanised
Height: 120 cm
7.1 582665000
Galvanised
Height: 50 cm
Lashing strap 5.00m
2.8 586018000
Zurrgurt 5,00m
Yellow
Connector Eurex 60
3.9 582657000
Verbindungsstck Eurex 60
Galvanised
Length: 15 cm
Width: 15 cm
Height: 30 cm
Plumbing strut shoe Eurex 60

Justiersttzenfu Eurex 60

Galvanised
Length: 18 cm
8.5 582660000
Galvanised
Length: 31 cm
Width: 12 cm
Height: 33 cm
Doka coil 16mm
0.009 588633000
Doka-Coil 16mm
Swivel coupler 48mm Eurex 60

Drehkupplung 48mm Eurex 60
1.0 582654000
Galvanised
Diameter: 1.6 cm
Galvanised
Width-across: 22 mm


18.2 588296000
Galvanised
254
0.31 588631000
42.0 586151000
Galvanised
Height: 77 cm
Max. load: 1100 kg
[kg]
Bolt-on castor set
Article n
33.5 586154000
Anklemm-Radsatz
consisting of:
[kg]
Railing board 15x160cm
Article n
4.0 183011000
Gelnderdiele 15x160cm
Varnished yellow

2 pcs.
Height: 23 cm

2 pcs.
Height: 32 cm
Painted blue
Max. load: 1100 kg
Tread board 35mm 30x60cm

Trittbrett 35mm 30x60cm
3.0 183010000
Varnished yellow
Stair tower d2-225

Stair bracket 225 right
Stair bracket 225 left
24.6 582681000
24.6 582682000
Treppenlauf 225
Anchoring shoe for stair tower
Galvanised
Length: 263 cm
Height: 111 cm
Pin 7x60mm
Ankerschuh fr Treppenturm
3.4 582680000
Galvanised
Length: 22 cm
Width: 12 cm
Height: 22 cm
0.02 582683000
Steckbolzen 7x60mm
Galvanised
Inner handrailing 225
5.7 582685000
Innenholm 225
Galvanised
Height: 111 cm
Intermediate railing 225
5.7 582686000
Zwischengelnder 225
Galvanised
Length: 87 cm
Height: 114 cm
Connection angle 225
6.0 582687000
Anschlusswinkel 225
Galvanised
Height: 116 cm
255

The enormous load-bearing capacity of the
system components permitted wide openings
for vehicular traffic here on the site of the
railway tunnel in Stans. Platform systems and
climbing rungs XS ensured maximum safety.
Tunnel Stans, Austria
Construction work by: Alpine Mayreder
The heavy-duty system,

highly adaptable for tunnelling
The load-bearing tower SL-1 was designed to boost cost-effectiveness in tunnelling operations. System beams, supports and struts
can be combined in different configurations. So the load-bearing
structure can be adapted to suit the shored cross-section and the
load.
The load-bearing tower SL-1 boosts costeffectiveness in tunnelling operations ...
The two side walls are cast at the same time in a day-by-day progress schedule.
This photo shows work on the Bindermichl
tunnel project in Austria.
because all the components in the modular system are rentable

because it is 100% compatible with the large-area formwork Top 50, so the
load-bearing tower SL-1 is the system of choice for demanding tunnel
cross-sectional geometries
because preassembled scaffolding segments make for speedy on-site
completion
because rentable ladder and platform systems are integrated
because the system is tried and tested and ideally sized
The versatile system for cut-and-cover and

drilled-tunnel projects ...
working on the forming wagon is easy, because of the wide pitch of the
scaffolding
fewer anchorages with the multipurpose support WU 16 and formwork
anchor 20
speedy retraction with 160 kN telescopic screw-jack system and lowering
shoes
rentable hydraulic components for safe repositioning without risk of
slippage even on steeply inclined tracks
Rentable hydraulic components make adjustment, retraction and repositioning

straightforward and fast.
The high-speed system for cut-and-cover tunnels ...

fully hydraulic forming wagons cope with all the difficulties of casting
liners in a day-by-day advance cycle
the formwork adjusts quickly and accurate to the very millimetre, with the
aid of optimised formwork attachments and supporting structures
systematised positioning systems facilitate automatic shifts to each casting
position in succession
There is a video of the

Doka load-bearing tower SL-1
in action.
Flexibility to adapt to widely differing geometries, aptly illustrated here in construction of the Adelrain division in the Ltschberg tunnel. Over a distance of 275 m, the
cross-section alters from 18.10 m to 7.60 m
across and from 9.95 m to 7.95 m high.
257

[kg]
Article n
598.0
496.7
371.0
148.0
113.0
582800000
582801000
582802000
582803000
582804000
[kg]
Article n
Doka Load-bearing
Heavy-duty
supporting
Towers
system SL-1
System beam SL-1 5.00m

Systemtrger SL-1
Painted blue
Moment of inertia: 14600 cm4
Section modulus: 1200 cm3
Screw set system beam SL-1

Schraubensatz Systemtrger SL-1
Screw set fixing bracket SL-1
Schraubensatz Spannkonsole SL-1

Galvanised
Kneebrace SL-1
0.003 582861000
79.2 582832000
Kopfband SL-1
Painted blue
Length: 156 cm
1.4 582829000
Galvanised
Screw set kneebrace SL-1

Connection splice plate SL-1
Stolasche SL-1
14.5 582805000
2.8 582856000
Schraubensatz Kopfband SL-1
Galvanised
Galvanised
Length: 43 cm
Width: 22 cm
Screw set connection splice plate SL-1

Schraubensatz Stosslasche SL-1
3.8 582850000
Galvanised
Bracket SL-1
25.7 582833000
Konsole SL-1
Galvanised
Length: 25 cm
Width: 22 cm
Height: 24 cm
Bracing bolt SL-1
15.6 582807000
Abspannbolzen SL-1
Screw set bracket SL-1
Galvanised
Length: 52 cm
Diameter: 7 cm
Distance piece SL-1
Galvanised
1.9 582809000
Distanzstck SL-1
Galvanised
Length: 16 cm
Width: 9.2 cm
Height: 8.2 cm
Split nut SL-1 15.0
Strut connection SL-1
Galvanised
Length: 9-11 cm
Width-across: 30/41 mm
Fixing bracket SL-1

Galvanised
Length: 22 cm
Width: 13 cm
Height: 12 cm
Galvanised
Length: 30 cm
Width: 20 cm
Height: 10 cm
Screw set strut connection SL-1
Schraubensatz Strebenanschluss SL-1

Galvanised
7.5 582849000
Spannkonsole SL-1
7.0 582806000
Strebenanschluss SL-1
0.70 582835000
Spannmutter SL-1 15,0
258
1.5 582857000
Schraubensatz Konsole SL-1
1.2 582851000
Heavy-duty supporting system SL-1

[kg]
Heavy duty roller gear SL-1 300kN
Wlzwagen SL-1 300kN
Article n
18.3 582818000
Painted blue
Length: 27 cm
Width: 21 cm
Height: 11 cm
Max. load: 30000 kg
Guidance for heavy duty roller gear SL-1

Wlzwagenfhrung SL-1
22.1 582834000
[kg]
Backing plate SL-1 2mm
0.69 582864000
1.1 582865000
1.4 582866000
Futterplatte SL-1
Galvanised
Length: 22 cm
Width: 22 cm
Brace stirrup SL-1
6.4 582862000
Abspannbgel SL-1
Galvanised
Height: 33.4 cm
Galvanised
Length: 39 cm
Width: 38 cm
Height: 16 cm
Screw set guid. f. heavy duty roller g. SL-1

Schraubensatz Wlzwagenfhrung SL-1
Galvanised
Inner plate SL-1
0.004 582858000
8.9 582830000
Zwischenplatte SL-1
Galvanised
Length: 27 cm
Width: 22 cm
Height: 2 cm
Screw set inner plate SL-1
Schraubensatz Zwischenplatte SL-1

Galvanised
Article n

Doka-Fahrgerst Z
consisting of:
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)

Cross board Z 1.35m
6.7
11.3
4.1
6.5
17.5
17.0
4.0
5.1
3.0
2.8
5.3
586016000
586017000
586021000
586022000
586023000
586024000
586025000
586026000
586027000
586028000
586029000
(not illustrated)
1.1 582855000

7.1 586030000
2.5 586031000
2.5 586032000
(not illustrated)
(O) Ballast Z
10.0 586033000
(not illustrated)
D
Travelling gear distance SL-1 330mm

Fahrwerkdistanz SL-1 330mm
53.0 582863000
Aluminium
Galvanised
Length: 33 cm
Width: 22 cm
Height: 24 cm
Lowering wedge SL-1 420kN

Absenkkeil SL-1 420kN
30.0 582821000
J
M
L
Galvanised
Height: 16.8 - 26.8 cm
Beam clamp SL-1
1.7 582824000
Trgerklemme SL-1
Galvanised
Height: 17 cm
Width-across: 24 mm
Roller SL-1 D 200x50
9.5 582823000
Rolle SL-1 D 200x50
Galvanised
Lowering zylinder SL-1 250kN

Absenkzylinder SL-1 250kN
27.2 582870000
Painted blue
Height: 28-56 cm
Max. load: 25000 kg
259
Multi-purpose waling SL-1 WU16 0.625m

Mehrzweckriegel SL-1
[kg]
Article n
24.0
29.0
40.0
48.0
58.0
67.0
72.1
86.0
89.9
107.0
582875000
582876000
582877000
582878000
582879000
582880000
582881000
582882000
582883000
582888000
Painted blue
cm
Spindle strut SL-1 T16 100/140cm

Spindelstrebe SL-1
54.1
87.8
78.2
126.0
582871000
582872000
582873000
582874000
[kg]
Article n
0.84 682002000
Galvanised
Width-across: 22 mm

Gerstrohr 48,3mm
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Galvanised
Galvanised
Chain travelling unit SL-1

Kettenfahrwerk SL-1
295.5 582825000
Galvanised
Length: 83 cm
Width: 37 cm
Height: 39 cm
Turning knob SL-1

Drehteller SL-1
Lowering shoe SL-1

Galvanised
Length: 28 cm
Height: 17 cm
Strut connection SL-1 T16
Hydraulic drive SL-1

Hydraulikantrieb SL-1
87.0 582828000
Painted blue
Length: 44 cm
10.4 582887000
Strebenanschluss SL-1 T16
Galvanised
Length: 26 cm
Width: 20 cm
Height: 13 cm
Connecting pin SL-1 D32 100

Verbindungsbolzen SL-1 D32 100
Driving hydraulic unit SL-1

Antriebs-Hydraulikaggregat SL-1
Waling connector SL-1 WU16 0.75m
Riegelverbinder SL-1 WU16 0,75m

Galvanised
Length: 75 cm
430.0 582848000
Length: 100 cm
Width: 74 cm
Height: 140 cm
1.0 582885000
Galvanised
Length: 17 cm
260
Galvanised
Length: 81 cm
Width: 50 cm
18.0 582884000
Absenkschuh SL-1
68.0 582827000
31.0 582886000
Heavy-duty supporting system SL-1

[kg]
Hydraulic distributor
Article n
23.0 580808000
Hydraulikverteiler
[kg]
Connection adapter SL-1
Article n
4.3 582810000
Anschlussadapter SL-1
Galvanised
Length: 35 cm
Width-across: 22 mm
Tool box SL-1
19.9 582836000
(A) Combination wrench 19
0.14 582837000
Werkzeugbox SL-1
Hydraulic unit for forming operations
742.0 580811000
Hydraulikaggregat fr Schalvorgnge
Painted blue
Length: 112 cm
Width: 80 cm
Height: 183 cm
Prop spindle SL-1
(B) Combination wrench 22

(C) Combination wrench 24
(D) Combination wrench 30
0.43 582840000
2 pcs.
(E)
(F)
(G)
(H)
(I)
(J)
(K)
(L)
(M)
(N)
Combination wrench 32
Ratcher-ring wrench 30/32
Extension 20cm 3/4"
Tie rod wrench 15.0/20.0
0.75
0.75
1.5
1.3
0.52
0.25
0.22
0.18
0.68
1.9
582859000
582860000
582841000
582843000
582846000
582845000
582844000
580684000
580683000
580594000
Galvanised
Length: 37 cm
Diameter: 8 cm
(O) Reversible ratchet 3/4"
1.5 580894000
Galvanised
Length: 50 cm
(P) Angular arbor SL-1

(Q) Ring spanner 46
(R) Fork wrench 46
A B
86.5
60.5
40.0
27.0
16.0
Sttze SL-1
0.25 582839000
2 pcs.
Galvanised
Length: 37 cm
Width: 37 cm
Height: 44.5-66.5 cm
Strut SL-1 2.50m

Strut SL-1 1.25m
Strut SL-1 0.625m
Strut SL-1 0.312m
Strut SL-1 0.156m
0.20 582838000
2 pcs.
81.0 582816000
Sttzenspindel SL-1
2 pcs.
582812000
582813000
582814000
582815000
582817000
1.4 582867000
0.96 582868000
0.87 582869000
H
I
J
L
M
Galvanised
Width: 37 cm
N
O
Access system XS
12.0 588672000
Screw set strut SL-1
0.56 582831000
Schraubensatz Sttze SL-1
Galvanised
Length: 100 cm
Galvanised
Basic plate SL-1
30.3 582808000
Grundplatte SL-1
Galvanised
Length: 37 cm
Width: 37 cm
Screw set basic plate SL-1
1.2 582852000
Schraubensatz Grundplatte SL-1

Galvanised
261

[kg]
Article n
33.2 588640000
19.1 588641000
Galvanised
Securing barrier XS
4.9 588669000
Galvanised
Length: 80 cm
16.5 588643000
Galvanised
Ladder cage exit XS
17.0 588666000
Galvanised
Height: 132 cm
262
Ladder adapter XS
Article n
5.0 588673000
Leiternfu XS
Galvanised
Height: 50 cm
Galvanised
[kg]

Composite forming
carriage
Whatver the composite superstructure, you have the right

Doka composite formwork system at your disposal: From costeffective standard solutions (composite forming carriage)
through combinations of composite forming carriage and Doka
heavy-duty props SL-1 to high-end custom solutions. Maximum
safety at work, moreover, is assured in every phase.
Bridge over the Auenbach Valley, Wolfsberg, Austria
Construction work by: Steiner-Bau, St. Paul im Lavanttal, Austria
Composite forming carriage
The highly efficient solution for

composite steel-concrete bridges
The Doka composite forming carriage enables speedy, safe construction of composite bridges comprising concrete carriageway
slabs on steel superstructures. Adaptation to variations in geometry,
rapid assembly using rentable standard components, and the high
safety standard are the keynote characteristics of the system.
Economical standard parts from the modular

system ...
Underhead composite forming carriage

ensures unobstructed access to the
entire carriageway.
for reliable adaptation to widely differing supporting-structure geometries

fully rentable as a custom "forming machine"
adaptable to any pouring steps in a 5 m grid
A complete forming wagon with integrated safety

systems, moving in one piece ...
the load-bearing tower is complete with all working platforms
the formwork elements of the Doka large-area formwork Top 50
afford versatility and high concreting quality.
Easy adaptation to different designs of bridge ...

with a very wide variety of cross-sectional shapes
with any radii of curvature
for special structural features such as raking struts
for any transverse and longitudinal constructs
Working without crane

for short bridges with versatile
adaptation to individual bridge
cross-sections.

utilises the experience of Doka's "Composite Bridges" competence
centre on your site
returns verifiable structural analyses for approvals procedures
takes each customer-specific requirement into account
Economical special solutions

with Doka standard components like
the load-bearing tower SL-1.
Overhead composite forming carriage

is ideal for week-by-week advances,
so on-time, in-budget progress is a
characteristic feature.
265
Bridge edge beam

formwork
15
15
10
22
The wide range of adjustment of the bridge edge

beam bracket and the stepless height adjustment
of the bridge edge beam support both contribute
to the enormous versatility of the bridge edge
beam formwork T.
The bridge edge beam brackets install

quickly, an important point when forming
is required along the full length of the
superstructures, or if bridges feature
tightradius curves.
Bridge over the Salzach Valley at Hollersbach, Austria
Construction work by: Alpine Hollersbach
Bridge edge beam formwork T

The quick, easily hand-operated
bridge edge beam formwork
The bridge edge beam formwork T installs manually for the quick
and easy casting of bridge-edge caps. The system consists of only a
small number of lightweight components, all of which are characterised by high load-bearing strength.
d
teste
Type-
Economical casting of bridge-edge caps for ...

short superstructures (full-length forming)
medium-length bridges with only a few repositioning cycles
Bridges with tight radii and complicated cross-sections
A wide range if adjustment is characteristic of the bridge end formwork T,
enabling it to adapt to widely differing geometries.
The bridge edge beam formwork T is type-tested and GS-marked.
Forming wagon T
The ready-to-roll bridge edge beam formwork
The movable, high-load forming wagon T carries a large-area preassembled bridge edge formwork that can be moved without having
to be disassembled. Maximised extent of preassembly for maximum
time savings.
Economical casting of bridge-edge caps for ...

long superstructures
high numbers of repositioning cycles
section-by-section repositioning
superstructures with no means of attachment to the underside of the
cantilevered slab
reconditioning of existing superstructures
bridges with wide radii
Together with straightforward handling,

the universality of the design for use as
forming wagon or demolition wagon and
for the horizontal repositioning of formwork ensures speedy progress day by day.
The galvanised, durable main

structure of the forming wagon T
is pre-assembled for speedy
installation and disassembly and
space-saving storage.
267

[kg]
Article n
[kg]
Article n
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Doka Load-bearing
Bridge
edge beam formwork
Towers
Bridge edge beam formwork T

Bridge edge beam bracket T 0.80m
Gesimskonsole T 0,80m
22.0 584330000
Galvanised
Length: 99 cm
Height: 80 cm

Gerstrohr 48,3mm
Bridge edge beam support T 1.40m

Gesimstrger T 1,40m
Galvanised
13.3 584331000
Galvanised
0.27 584375000
Gerstrohranschluss
Galvanised
Height: 7 cm
Bridge edge beam clamp T 0.40m

Gesimszwinge T 0,40m
10.1 584332000
Galvanised
Height: 104 cm
0.84 682002000
Galvanised
Width-across: 22 mm
Bracket support T
17.5 584372000
Konsoltrger T
Galvanised
Width: 44 cm
Height: 85 cm
Bridge edge beam support extension T 0.20m

Einschubtrger T 0,20m
2.9 584333000
Galvanised
Length: 45 cm
Waling connecting plate T

Bridge edge beam waling T 2.70m
Gesimsbhne T 2,70m
35.5 584334000
5.5 584370000
Riegellasche T
Galvanised
Width: 12 cm
Height: 37 cm
Galvanised
Length: 285 cm
Spindle connecting plate T
3.1 584371000
Spindellasche T
Handrail post 1.00m
Galvanised
Width: 20 cm
Height: 25 cm
3.8 584335000
Gelnder 1,00m
Galvanised
Length: 124 cm
17.7 584373000
Galvanised
268

[kg]
Handrail clamp S
Article n
11.5 580470000
[kg]
Hole plug 29mm
0.003 581891000
Gesimsankerstopfen 29mm
Galvanised
Article n
Grey
Diameter: 3 cm
Zinc plug 15.0
0.20 581889000
Zinkstpsel 15,0
Galvanised
Length: 9.9 cm
Diameter: 2.9 cm
Tool: Spanner for 1/2" square head
Handrail clamp T
12.3 584381000
Collar-mount 21
Collar-mount 25
0.39 584365000
0.36 584364000
Gesimshlse
Galvanised
Diameter: 6 cm
Galvanised
0.73 580580000
Umschaltknarre 1/2"
Galvanised
Length: 30 cm
Handrail post 1.10m
5.6 584384000
Schutzgelnder 1,10m
Galvanised
Height: 134 cm
Extension 11cm
0.20 580581000
Box nut 30 1/2"
0.20 580575000
Verlngerung 11cm
Stecknuss 30 1/2"
0.03 584385000
Steckhlse 24mm
Grey
Length: 16.5 cm
Diameter: 2.7 cm
Forming wagon T
Screw sleeve 20.0
0.03 584386000
Schraubhlse 20,0
Yellow
Length: 20 cm
Diameter: 3.1 cm
Bogie for forming wagon TS
936.0 584336000
(A) Horizontal frame for forming wagon T

(B) Vertical frame for forming wagon T
(C) Frame strut for forming wagon T
505.0 584337000
180.0 584338000
13.5 584339000
Grundgestell Schalwagen TS
consisting of:
2 pcs.
(D) Spindle strut GS T6 95/140cm
10.3 584340000
2 pcs.
Screw-in cone 30kN 15.0
0.74 581895000
Einschraubkonus 30kN 15,0
(E) Flanged wheel T
Galvanised
Length: 330 cm
Width: 229 cm
Height: 214 cm
Galvanised
Length: 15 cm
Observe the loading forces given in
the enclosed fitting instructions!
Bridge edge beam anchor 30kN 15.0
0.45 581896000
Bridge edge beam anchor 30kN 15.0 galv.
0.44 581890000
Gesimsanker 30kN 15,0
Length: 7 cm
Nailing cone 15.0
0.02 581897000
Nagelkonus 15,0
51.0 584341000
4 pcs.
Double jib for forming wagon T
357.0 584342000
(A) Jib frame for forming wagon T

(B) Jib slide for forming wagon T
294.0 584343000
63.0 584344000
Ausleger Schalwagen T
consisting of:
Galvanised
Length: 580 cm
Height: 127 cm
Black
Length: 7 cm
269

[kg]
Article n
10.2 584355000
[kg]
Suspension beam for forming wagon T
Hngetrger Schalwagen T
Galvanised
Article n
175.0 584346000
Galvanised
Height: 352 cm
12.5 584323000
Galvanised
Longitudinal beam for forming wagon T
36.0 584351000
Lngstrger Schalwagen T
Galvanised
Length: 301 cm
Ready-to-use platform for forming wagon T

21.6 584324000
Fertigbhne Schalwagen T
347.5 584347000

Length: 490 cm
Width: 170 cm
Painted blue
Railing strut for forming wagon T

Gelnderstreben Schalwagen T
18.0 584348000
Galvanised
Height: 300 cm
Spindle strut GS T7 109/166cm

Spindelstrebe GS T7 109/166cm
21.6 584345000
Galvanised
2.8 584353000
Gelnderholm T 0,70m
Galvanised
Pressure prop T
37.7 584349000
Drucksttze T
Galvanised
Height: 194 cm
Handrail clamp S
11.5 580470000
Galvanised
270

[kg]
Suspension beam extension T 1.00m
Hngetrgerverlngerung T 1,00m
Article n
89.5 584361000
[kg]
Railing T top
Platform extension plate T
86.0 584376000
Fertiggelnder T oben
Galvanised
Height: 143 cm
Article n

Length: 490 cm
Height: 156 cm
24.0 584362000
Bhnenverbreiterung T
Galvanised
Width: 95 cm
Height: 36 cm
Delivery condition: cable coiled
Turnbuckle included in scope of supply
Railing T bottom
98.0 584377000
Fertiggelnder T unten
Length: 490 cm
Height: 156 cm
Handrail clamp T
12.3 584381000
Handrail lengthening piece T 1.00m

Gelnderverlngerung T 1,00m
Galvanised
9.8 584363000
Galvanised
Handrail post 1.10m
5.6 584384000
Schutzgelnder 1,10m
Stabilising plate T
Galvanised
Height: 134 cm
2.5 584367000
Stabilisierungslasche T
Galvanised
Length: 13 cm
Width: 12 cm
Height: 8 cm
Slinging plate T
8.3 584368000
Anhngelasche T
Galvanised
Length: 28 cm
Width: 14 cm
Height: 8 cm
Attachable platform support T

Bhnenauflage T

Grey
Length: 16.5 cm
Diameter: 2.7 cm
2.5 584369000
Galvanised
Length: 12.6 cm
Width: 11 cm
Height: 29.6 cm
Connecting pin 10cm
0.03 584385000
Steckhlse 24mm
Screw sleeve 20.0
0.03 584386000
Schraubhlse 20,0
Yellow
Length: 20 cm
Diameter: 3.1 cm
0.34 580201000
Galvanised
Length: 14 cm
Spring cotter 6mm
Adjusting spindle T
17.1 584374000
Justierspindel T
Galvanised
Height: 96 cm
0.06 580204000
Federvorstecker 6mm
Galvanised
Length: 13 cm
271

[kg]
Vertical extension rail T
Article n
107.0 584378000
Aufsatzgelnder T

Length: 490 cm
Height: 120 cm
Article n
6.5 580390000
GF-Werkzeugbox
0.73 580580000
Galvanised
Length: 30 cm
22.9 584383000

4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
Gerstrohr 48,3mm
Tool box GF
Adjusting device for forming wagon T
Justiereinrichtung fr Schalwagen T
Painted blue
Height: 28.5-55.2 cm
Max. load: 12000 kg
[kg]
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)
(L)
Fork wrench 13/17

Fork wrench 22/24
Fork wrench 30/32
Ring spanner 17/19
Extension 11cm
Extension 22cm
Box nut 13
Box nut 24
Box nut 30 1/2"
0.08
0.22
0.80
0.27
0.20
0.31
0.16
0.16
0.06
0.12
0.20
580577000
580587000
580897000
580590000
580581000
580582000
580583000
580598000
580576000
580584000
580575000
1.5 580894000
Umschaltknarre 3/4"
Galvanised
Length: 50 cm
Galvanised
Extension 20cm 3/4"
0.68 580683000
Box nut 50
0.81 581449000
Verlngerung 20cm 3/4"
0.27 584375000
Gerstrohranschluss
Galvanised
Height: 7 cm
Stecknuss 50
Swivel coupler 48mm
1.5 582560000
Drehkupplung 48mm
Galvanised
Width-across: 22 mm

0.84 682002000
0.71 586013000
Anschraubkupplung
Galvanised
Width-across: 22 mm
Normal coupler 48mm
1.2 682004000
Normalkupplung 48mm
Galvanised
Width-across: 22 mm
272

frames
Whenever single-sided wall formwork up to 12.80 m

has to be erected, Doka supporting construction
frames reliably transfer concrete loads. Many integrated details facilitate and accelerate handling in
the rough and tough world of constructionsite work.
Museumsquartier, Vienna, Austria
Joint venture "Museumsquartier", Vienna
For safety with

single-sided wall formwork
Supporting construction frames reliably transfer the loads from the
concrete through inclined anchors where beam formwork or framed
formwork elements are not anchored through the concrete.
mum
Maxi height
ng
pouri
m
12.80
Supporting construction frame Universal F ...

strong single-sided wall formwork for pouring heights up to 12.80 m
flexible height adjustment
fast, easy repositioning and movement of high, heavy units
with easy and quick assembly by pre-assembled stacking plates on the
attachable frame.
spindles with pivoting baseplates to allow for uneven grounds
with prefitted couplers for bracing
comprehensive range of safety accessories with safe ladders and platform
solutions for all heights
Supporting construction frame

"Variabel" ...
Starter block for dam formwork with FF20

and supporting construction frame Universal.
mum
Maxi height
ng
pouri
4.00 m
comprising standard steel waling and additional

components
simple bracing with scaffold tubes
can be assembled and transported by hand
See the user information for

more details.
Spacing can be changed to adapt to the

loads exerted by the fresh concrete.
275
Variable stacking
Variable stacking utilising construction frames F 1.5 m and

2.0 m make for optimum flexibility in adapting to any height
up to 4.5 m.. One advantage, therefore, is adaptability for
working underneath existing structures, for example in
cut-and-cover tunnels.
Combination of standard
steel waling and additional
components to form the
supporting construction
frame up to a height of 4.00 m
Pouring height up to 4.50 m

with supporting construction
frame Universal F 4.50 m

by combination with attachable frame F 1.50 m

by combination with attachable
frame F 1.50 and attachable
frame F 2.00 m
NEW
Safe ladders and platform

solutions for any height
Safe access to workplaces with the ladder system XS or

the Doka stair tower
276
The construction frame F

2.40 m can be used underneath supporting construction frame F for casting
single-sided walls higher
than 10.40 m.
Two construction frames F

2.40 m take the pouring
height up to 12.80 m.
References
Al-Sheikh Jaber Al-Ahmad International Stadium, Kuwait
Special applications:
Supporting construction frames inserted horizontally and anchored
to the structure in combination with special floor tables formed the
sturdy supporting structure for the floor-slab formwork of the control tower at Vienna International Airport, Austria.
Doka universal supporting construction frames and Framax Xlife

large panels were used to cast the 8-m high walls in a single pour.
Alexa Shopping and Leisure Center in Berlin, Germany
277

[kg]
Article n
[kg]
Article n
20.2
35.8
40.2
60.4
580040000
580043000
580044000
580048000
Doka Load-bearing
Supporting
construction
Towers
frames
10.7 588477000
Absttzwinkel
Galvanised
Length: 66 cm
Width: 37 cm
Height: 91 cm
Framax clamping bolt 4-8cm

Framax-Klemmschraube 4-8cm
Painted blue
cm
0.39 588107000
Spindle strut 12 3.00m
Galvanised
Length: 19 cm
Frami wedge clamp

32.0 580521000
Spindelstrebe 12 3,00m
Painted blue
1.1 588441000
Frami-Klemme
Galvanised
Length: 16 cm
Waling WU14 for supporting construction frame
99.0 580510000
(A) Steel section WU14 f. supp. constr. frame
81.0 580509000
Absttzbockriegel WU14
consisting of:
Painted blue
Height: 250 cm
12.5 584323000
Galvanised
(B) Pressure shoe
6.2 580531000
Painted blue
Height: 32 cm
(C) Anchoring shoe
12.0 580533000
Painted blue
Height: 51 cm
Painted blue
Height: 252 cm
26.2 584325000
Galvanised
Supporting shoe
9.5 580532000
Sttzschuh
Painted blue
Length: 28 cm
Tension plate
2.5 580534000
Zuglasche
Painted blue
Length: 19 cm

19.6
35.0
38.9
48.7
60.2
79.4
Painted blue
cm
278
580003000
580006000
580007000
580009000
580011000
580013000

[kg]
Article n
29.4 584326000
Galvanised
[kg]
Article n
57.5 584328000
Galvanised
35.0 584327000
Galvanised
54.1 582871000
87.8 582872000
126.0 582874000
Spindelstrebe SL-1 T16 100/140cm

Galvanised

Galvanised

Galvanised
279

[kg]
Article n
6.0 587533000
[kg]
Attachable frame F 2.40m
1107.0 582901000
Anbaurahmen F 2,40m
Painted blue
Length: 576 cm
Painted blue
Length: 55 cm
Connecting pin 10cm
Article n
0.34 580201000
Galvanised
Length: 14 cm
Stacking plate F 2,40m

Spring cotter 6mm
0.06 580204000
Federvorstecker 6mm
Painted blue
Height: 63.5 cm
Galvanised
Length: 13 cm
Supporting construct. frame Universal F4.50m

Absttzbock-Universal F 4,50m
32.5 582902000
Aufstocklasche F 2,40m
306.0 580500000
Painted blue
Length: 196 cm
Supporting construction frames only
reach the required statical loadability
once they have been braced.
Spindle for attachable frame F 2.40m

Spindel fr Anbaurahmen F 2,40m
20.1 582903000
Galvanised
Height: 47.5 cm
Anchoring profile 0.55m
44.5 582904000
Ankerprofil 0,55m
Painted blue
236.0 580502000
Anbaurahmen F 1,50m
Lowering wedge 1000kN
53.5 582905000
Absenkkeil 1000kN
Painted blue
Length: 280 cm
Painted blue
Height: 18.2 - 27.2 cm
Ring spanner 80
7.5 582906000
Ringschlssel 80
Galvanised
Length: 62.4 cm
Bracing profile 2.95m

451.0 580501000
Anbaurahmen F 2,00m
34.5 582907000
Verschwertungsprofil 2,95m
Painted blue
Painted blue
Length: 394 cm
Platform profile 1,00m f. supp. constr. frame
11.0 582908000
Extension safety clamp for platform profile
1.7 582909000
Bhnenprofil 1,00m fr Absttzbock

Galvanised
Length: 147.5 cm
Auszugsicherung fr Bhnenprofil
Galvanised
Length: 38.4 cm
280

[kg]
Handrail post 1.00m
Article n
3.8 584335000
Gelnder 1,00m
[kg]
Mehrzweckriegel SL-1
Galvanised
Length: 124 cm
T-Lasche fr Absttzbock
40.0 582877000
107.0 582888000
Painted blue
cm
Waling connector SL-1 WU16 0.75m

T plate for supporting construction frame
Article n
29.8 582910000
Riegelverbinder SL-1 WU16 0,75m

Galvanised
Length: 75 cm
31.0 582886000
Painted blue
Length: 74.6 cm
Anchor waling 0.70m

Anchor waling 1.95m
Anchor waling 2.95m
27.0 580517000
76.3 580545000
110.0 580546000
Ankerriegel
Painted blue
Connecting pin SL-1 D32 100

Verbindungsbolzen SL-1 D32 100
1.0 582885000
Galvanised
Length: 17 cm
Anchor waling positioner
0.62 580539000
Ankerriegelhalter
Galvanised
Length: 31 cm
17.7 584373000
Galvanised

50.0 580022000
75.7 580024000
Painted blue
cm
Corner plate supporting constr. frame

Intermediate flange for supp. constr. frame
Zwischenflansch fr Absttzbock
16.2 582911000
Ecklasche Absttzbock
Painted blue
Length: 92 cm
Width: 92 cm
Painted blue
Length: 42.7 cm
Supporting shoe WU16
44.4 580518000
8.0 582912000
Sttzschuh WU16
Facade waling WS10 2.50m
Painted blue
Length: 26.5 cm
Pressure shoe T7/T16
50.0 580692000
Fassadenriegel WS10 2,50m
Painted blue
cm
18.5 582913000
Druckschuh T7/T16
Painted blue
Height: 72.5 cm
Supporting construction distancer 20cm

Bockdistanz 20cm
9.4 580519000
Galvanised
Length: 25 cm
Width: 19 cm
Height: 20 cm
2.5 580526000
Keilriegelhalter
Galvanised
Length: 26 cm
Height: 31 cm
281

[kg]
Galvanised
Length: 26 cm
Galvanised
Length: 36 cm
Framax wedge clamp
Article n
0.60 588158000
[kg]
Winch with transport device
Article n
37.0 580541000
Hubwinde mit Transportroller
Painted blue
Height: 127 cm
Max. load: 1400 kg
0.69 583002000
1.5 588152000
Framax-Spannklemme
Galvanised
Length: 21 cm
Framax supporting construct. frame connector

Framax-Bocklasche
Galvanised
Width-across: 22 mm
15.0 580506000
Swivel coupler 48mm
Painted blue
Height: 77 cm
Framax supporting construct. frame bolt 36cm

Framax-Bockschraube 36cm
Galvanised
Width-across: 22 mm
0.62 580505000
0.80 588183000
1.5 582560000
Drehkupplung 48mm
Galvanised
0.84 682002000

Gerstrohr 48,3mm
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Galvanised
Galvanised
Attachable roller 200

Ansteckrolle 200
19.3 580538000
Painted blue
Height: 38 cm
Max. load: 1000 kg
The attachable rollers are only suitable for use on hard, solid surfaces.
Attachable roller 250

Ansteckrolle 250
47.0 580537000
0.27 584375000
Gerstrohranschluss
Galvanised
Height: 7 cm

Anschraubbhne MF75
Galvanised
Length: 113 cm
Height: 152 cm
Painted blue
Height: 78 cm
Max. load: 1400 kg
The attachable rollers are only suitable for use on hard, solid surfaces.
Swivel plate MF
4.5 580672000
Schwenkplatte MF
Galvanised
Length: 29 cm
Height: 20 cm
282
19.0 580669000

[kg]
Handrail clamp S
Article n
11.5 580470000
[kg]
Article n
Hexagon spanner head 46 3/4"
0.70 580512000
Extension 20cm 3/4"
0.68 580683000
Sechskantnuss 46 3/4"
Galvanised
Verlngerung 20cm 3/4"
Cone spanner 20.0
3.5 581471000
Konusschlssel 20,0
Crane sling 3.50m
8.8 580461000
Galvanised
Length: 57 cm
Diameter: 16 cm
Max. load: 1950 kg
Testing truss for diagonal anchors 15.0/20.0

Prfbock fr Schrganker 15,0/20,0
Galvanised
Length: 32 cm
Width: 25 cm
Height: 19 cm
13.5 580514000
9.1 580392000
0.73 580580000
Galvanised
Length: 30 cm
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)
(L)
(M)
(N)
(O)
(P)
Fork wrench 13/17

Fork wrench 22/24
Fork wrench 30/32
Fork wrench 36/41
Ring spanner 17/19
Square nut 22
Box spanner 41
Extension 11cm
Extension 22cm
Box nut 13
Box nut 24
Box nut 30 1/2"
0.08
0.22
0.80
1.0
0.27
0.31
0.99
0.20
0.31
0.16
0.16
0.06
0.12
0.20
0.30
580577000
580587000
580897000
580586000
580590000
580589000
580585000
580581000
580582000
580583000
580598000
580576000
580584000
580575000
580579000
Galvanised
Length: 8 cm
Width-across: 30 mm
1.5 580894000
Umschaltknarre 3/4"
Galvanised
Length: 50 cm
283
Doka Working and Protection Platforms
Doka Safety System

Safety is a top-priority feature of all Doka systems. Doka formwork systems make a major contribution to
improved safety at work in the construction industry. Doka safety products are characterised by ease of
operation, ergonomically optimised handling, and fully integrated connection parts.
Safe place of work and safe access to it

Hazardous situations:
Concreting work
Roof work
Exposed edge
Ladders
Dokaset
Pouring platforms and

detachable brackets
Dokamatic table
platform
The complete wall formwork with integrated

working platforms and
ladders
Page 48
The safe and easy-to-use

platform system for Doka
framed formwork Framax
Xlife
Page 26
Safety for pouring

concrete - Doka pouring
platforms and brackets
Page 23
The easily installed platform for the Dokamatic

table: maximised safety
for slab forming
Page 152
Bracket platform M
Folding platform K
Ladder system XS
Stair tower
Certified safety in masonry

and precast construction
Page 286
The ready-to-go scaffold

platform for concreting
work
Page 294
The professional ladder

system for all Doka wall
and column formwork
Page 306
For speedy and safe

access, even high above
the ground
Page 237
Doka safety products:
284
Dependable side guards

Hazardous situations:
Exposed edge
Stairs
Exposed edge
Guard rail 1,10m
Handrail clamp S
Handrail clamp T
Quick and dependably safe

guard rail for cordoning off
slab edges, openings in the
slab and other exposed
places where falls could
occur
Page 302
Safe solution, easily installed anywhere along

the wooden formwork
beam
Page 303
Safety from start to finish:

From pouring of the slab
or the supporting structure to installation of the
permanent guard rail
Page 303
Slab aperture
Doka safety products:
285
Bracket platform M
Speedy, cost-effective installation and repositioning instead of time-consuming erection
jobs with single brackets and loose planks:
these are the advantages of the GS-marked
bracket platform M as a ready-to-use, lightweight working and protection platform.
Rehabilitation of the BB Viaduct, Mattersburg,
Austria
Bracket platform M
Certified safety
in masonry work and precast construction
The bracket platform M is a ready-to-use, lightweight working and protection platform that enhances safety in masonry work and precast construction work. The bracket platform M has won an EU award and complies with both EN 12811-1 for working platforms and DIN 4420 for
protection platforms.
Certified safety ...

means dependable protection on the construction site
reduces costs, because working progress is quicker
means recessing slinging eyes for a flat, safe platform surface
rrying
ad-ca
o
l
.
Perm apacity
c
2
g/m
300 k
Ease of handling ...

because the pre-assembled units have a working width of 1.55 m and the
system elements are practical
with quick-acting coupling for connecting bracket and planking
without loose planks and brackets
saves on labour costs and crane time
Fall barrier
Working platform
A second fixing opportunity means

that the bracket platform M can be
set 1.00 m higher, for example to
comply with the maximum height
requirement of fall barriers.
As a working platform for masonry

work, for example, the bracket
platform M offers the safety of a
wide platform and close-meshed
railing.
Roofwork fall barrier
* Symboldarstellung
In combination with protective nets

with a maximum mesh of 100 mm
and the universal handrail lengthening piece M the bracket platform M
can be used as a reliable roofwork
fall barrier.
287
Bracket platform M in detail

High loadability up to 300 kg/m2 in all applications
Quick-acting coupling for connecting bracket and planking
Brackets weigh only 32 kg
Sturdy design built for durability, scumbled yellow planking modules and
galvanised steel structural elements
Suspension
The Doka suspension

sling ES for suspended
attachment complies with
the stipulations of load
class 4 as laid down in EN
12811-1 and DIN 4420-1.
The bracket platform M installs easily

to cut costs: Lift the hinged railing engage the brackets - drop the platform into position - finished.
The precast member head

M converts the bracket
platform M quickly and
easily to a concreting
platform for cavity-wall
pre-casts.
The wide spacing of 2.50 m

between brackets reduces
the number of fixing points.
The platform plankings are
3.00 m long and can be
combined in any way with
the brackets and locked in
place with the quick-acting
couplings, or even used on
their own for bridging.
2,50 m
288
2,50 m
2,50 m
The bracket platform M
Handrail extension
The universal handrail lengthening piece M extends the
field of application of the bracket platform M with end-toend safety for roofwork.
Corner platform planking M
Handrail clamp S
The corner platform planking M is a modular unit for

bridging corners safely. The entire unit repositions easily
with a single crane lift.
The GS-marked handrail

clamp S is the universal
barrier for all platforms
and slab openings.
Logistics
Platform plankings and
brackets stack and ship
separately to minimise
space requirements and
use truck capacity to the
full: 200 running metres of
platform on one trailertruck.

[kg]
Article n
[kg]
Article n
Doka Working
Bracket
platform
and
M Protection Platforms
Platform bracket M
33.6 580547000
Bhnenkonsole M
Corner platform strut M
13.3 580552000
Eckbhnenstrebe M
Galvanised
Length: 136 cm
Height: 230 cm
Galvanised
Height: 232 cm
Support lengthening piece M

Absttzverlngerung M
Platform decking M 3.00m
Galvanised
Height: 338 cm
121.7 580548000
Bhnenbelag M 3,00m

Pallet for platform brackets M

Palette fr Bhnenkonsolen M
74.9 580549000
Galvanised
Length: 146 cm
Width: 115 cm
Height: 156 cm
Max. load: 600 kg
Corner transition M 1.80m
77.9 580556000
Eckbergang M 1,80m

Suspension beam M
17.6 580572000
Einhngetrger M
Galvanised
Height: 221 cm
Universal handrail lengthening piece M
Universal-Gelnderverlngerung M
Galvanised
Height: 113 cm
Bracket railing post M

Galvanised
Height: 232 cm
64.7 580550000
Eckbhnenbelag M
6.7 580560000
11.0 580554000
Konsolgelnderholm M
Corner platform decking M
33.7 580553000

Length: 160 cm
Width: 160 cm
Corner platform railing M
25.4 580551000
Eckbhnengelnder M
Galvanised
Length: 177 cm
Height: 123 cm
290
Handrail clamp S
11.5 580470000
Galvanised
Bracket platform M
[kg]
Article n
29.1 580488000
[kg]
Suspension profile ES
15.3 580596000
Aufhngeprofil ES
Galvanised
Height: 112 cm
Galvanised
Length: 109 cm
Suspension shoe M
4.3 580557000
Aufhngeschuh M
Handrail post 1.10m
Galvanised
Width: 15 cm
Height: 18 cm
5.6 584384000
Schutzgelnder 1,10m
Article n
Galvanised
Height: 134 cm
Anchor buckle M
1.2 580558000
Ankerbgel M
Galvanised
Width: 8 cm
Height: 16 cm
Screw sleeve 20.0
0.03 584386000
Schraubhlse 20,0
Wall anchor M
Galvanised
Length: 80 cm
Yellow
Length: 20 cm
Diameter: 3.1 cm
0.03 584385000
Steckhlse 24mm

Galvanised
Length: 37 cm
Diameter: 8 cm
12.3 584381000
1.9 580594000
Ankerstabschlssel 15,0/20,0
Grey
Length: 16.5 cm
Diameter: 2.7 cm
Handrail clamp T
1.5 580559000
Wandanker M
0.74 581895000
Galvanised
Galvanised
Length: 15 cm
0.45 581896000
0.44 581890000
Suspension loop ES
1.0 580458000
Einhngeschlaufe ES
Length: 7 cm
Non-treated
Length: 72 cm
Nailing cone 15.0

Suspension plate ES
9.2 580493000
Aufhngeblech ES
0.02 581897000
Nagelkonus 15,0
Black
Length: 7 cm
Galvanised
Length: 68 cm
Precast member head M
7.0 580573000
Fertigteilkopf M
Corner suspension plate M
19.0 580591000
Eckeinhngeblech M
Galvanised
Height: 55 cm
Galvanised
Length: 73 cm
291

[kg]
Mounting sleeve M
Article n
0.09 580574000
Einbauhlse M
Grey
Length: 29 cm

13.9 588480000
Galvanised

Gerstrohr 48,3mm
[kg]
Article n
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
Galvanised
Swivel coupler 48mm
1.5 582560000
Drehkupplung 48mm
Galvanised
Width-across: 22 mm

18.2 588296000
Galvanised
15.0 588620000


33.3 588297000
Galvanised
Platform transport fork K/M
194.0 580492000
Bhnen-Umsetzgabel K/M
Painted blue
Width: 210 cm
Max. load: 600 kg
Access system XS
0.31 588631000
Doka coil 16mm
20.8 588662000
Galvanised
Width: 89 cm
Height: 63 cm
0.009 588633000
Doka-Coil 16mm
Galvanised
Diameter: 1.6 cm
292

Galvanised
Length: 18 cm
12.0 588672000
Galvanised
Length: 100 cm
Bracket platform M
[kg]
Article n
[kg]
Article n
33.2 588640000
Galvanised
19.1 588641000
Galvanised
Securing barrier XS
4.9 588669000
Galvanised
Length: 80 cm
16.5 588643000
Galvanised
Ladder cage exit XS
17.0 588666000
Galvanised
Height: 132 cm
293
Folding platform K
The folding platform K is the quick working platform,
roofwork fall barrier, or overhead guard: It packs flat to
save space for transportation and is quickly opened on
site, ready to be lifted into position by the crane and
securely suspended on the prepared suspension point.
New campus building at the Fachhochschule Graz,
Austria
Construction work by:: Strobl BaugesmbH, Weiz
Folding platform K
The pre-assembled platform

for concreting work
Doka folding platforms K are pre-assembled, ready-to-use scaffold
platforms with standardised system components for all construction
jobs, compliant with both EN 12811-1 for working platforms and DIN
4420 for protection platforms.
Certified safety ...

means dependable protection on the construction site
reduces costs, because working progress is quicker
System grid for suspension points 1.50 m ...
rrying
ad-ca
o
l
.
Perm apacity
c
2
g/m
600 k
easy planning with the 3.00 or 4.50 m platforms

for dependable bridging of storey, wall and window apertures
Ease of handling ...

on account of pre-assembled units and practical system components
saves on labour costs and crane time
Flat, 1.80 m wide work-deck ...

permits use in combination with wall formwork up to 5.50 m high
features recessing slinging eyes to prevent trips
295
Folding platform K in detail
Suspension
The standard suspension is

the suspension cone that
screws into the casting
positioning point.
The Doka suspension loop ES

available for loop attachment
complies with the DIN and
NORM regulations.
Two types of suspension and a wide range of accessories for adapting to

the construction site
High loadability up to 600 kg/m2 - scaffolding group 6
Planking module can be raised 0.50 m or lowered 1.00 m
Sturdy design built for durability, scumbled yellow platform planking and
galvanised steel structural elements
Steel sections to protect the ends of the platform planking
Wallplugs can be used for

reliable attachment to the
concrete slab after casting.
Add-on components
The ready-to-use, hinged closure platform

3.00 m is for closing corners and safely
bridging differences in length up to 2.50 m
without loss of time and without loose
planks.
The side handrail clamping unit T is the

quick way to put up safe end railings.
Handrail lengthening piece K and protective

netting are the ideal add-ons for a roofwork
fall barrier.
296
Folding platform K
Logistics
Folding platforms K are pre-assembled and
fold flat for space-saving stacking and shipping without toppling and without slipping.
Packing density is high, so shipping volume
is correspondingly low and full use is made
of truck capacity.
See the user information for

more details.
Climbing formwork
The ample width of 1.80 m of the folding platform K offers more than enough space to safely
support wall formwork. This photo shows work in progress on the punctuated facade of the
new station in Innsbruck, Austria.
297

[kg]
Article n
[kg]
Article n
Doka Working
Folding
platform
and
K Protection Platforms

Doka-Faltbhne K
291.5 580442000
444.5 580443000

Hngebhne 120

Folding bracket K
44.0 580411000
52.6 580412000
Galvanised
52.4 580441000
Faltkonsole K
Galvanised
Length: 224 cm
Height: 245 cm
Suspension head for use on suspension cone.
Bow head K-ES
Support girder
28.5 580414000
Sttztrger
Galvanised
Height: 248 cm
3.9 580444000
Bgelkopf K-ES
Galvanised
Height: 35 cm
Bearing profile
4.9 580417000
Druckprofil
Galvanised
Length: 34 cm
Width: 19 cm
Doka corner folding platform A

Doka-Faltbhne A Eckausfhrung
461.5 580473000
Strut

Suspended using adapter A for suspension cone.
Closure platform 3.00m

Ausgleichsbhne 3,00m
153.5 580485000
32.9 580416000
Sttzstab
Galvanised
Length: 370 cm
2.7 582733000
Horizontalstrebe d2 175
Galvanised
Horizontal strut 1.35m
2.1 580422000
Horizontale 1,35m
Galvanised
298
Folding platform K

Gerstrohr 48,3mm
[kg]
Article n
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
20.0
22.0
24.0
4.0
682014000
682015000
682016000
682017000
682018000
682019000
682021000
682022000
682023000
682024000
682025000
682001000
[kg]
Handrail post 1.10m
Article n
5.6 584384000
Schutzgelnder 1,10m
Galvanised
Height: 134 cm
Galvanised
0.03 584385000
Steckhlse 24mm
Grey
Length: 16.5 cm
Diameter: 2.7 cm
0.84 682002000
Galvanised
Width-across: 22 mm
Screw sleeve 20.0
0.03 584386000
Schraubhlse 20,0
Yellow
Length: 20 cm
Diameter: 3.1 cm
Swivel coupler 48mm
1.5 582560000
Drehkupplung 48mm
Galvanised
Width-across: 22 mm
Handrail clamp T
12.3 584381000
Galvanised
68.4 580012000

Painted blue
cm

Galvanised
Height: 112 cm
71.5 580050000
Stahlwandriegel WS10 Top50 3,50m

Painted blue
cm

Handrail lengthening piece K
Gelnderverlngerung K
4.9 580447000
Galvanised
Height: 20 cm

11.5 580470000
3.0 580478000
Galvanised
Height: 87 cm
Handrail clamp S
29.1 580488000
15.0 588620000
Galvanised
299

[kg]
Platform transport fork K/M
Article n
194.0 580492000
Bhnen-Umsetzgabel K/M
[kg]
Suspension profile ES
15.3 580596000
Aufhngeprofil ES
Painted blue
Width: 210 cm
Max. load: 600 kg
Article n
Galvanised
Length: 109 cm
Suspension plate ES
9.2 580493000
Aufhngeblech ES
Galvanised
Length: 68 cm
Star screw
0.75 580425000
Sternschraube
9.1 580392000
Galvanised
Length: 17 cm
0.73 580580000
Galvanised
Length: 30 cm
Suspension beam K2
44.1 580463000
Einhngetrger K2
Galvanised
Height: 251 cm
Bow head ES
6.2 580459000
Bgelkopf ES
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)
(L)
(M)
(N)
(O)
(P)
Fork wrench 13/17

Fork wrench 22/24
Fork wrench 30/32
Fork wrench 36/41
Ring spanner 17/19
Square nut 22
Box spanner 41
Extension 11cm
Extension 22cm
Box nut 13
Box nut 24
Box nut 30 1/2"
0.08
0.22
0.80
1.0
0.27
0.31
0.99
0.20
0.31
0.16
0.16
0.06
0.12
0.20
0.30
580577000
580587000
580897000
580586000
580590000
580589000
580585000
580581000
580582000
580583000
580598000
580576000
580584000
580575000
580579000
Galvanised
Length: 8 cm
Width-across: 30 mm
Galvanised
Length: 21 cm
Width: 11 cm
Height: 29 cm
Suspension plate AK
8.3 580494000
Aufhngeblech AK
Galvanised
Length: 65 cm
Suspension loop ES
1.0 580458000
Einhngeschlaufe ES
Non-treated
Length: 72 cm
Suspension shoe A
Access system XS
Galvanised
Width: 89 cm
Height: 63 cm
10.0 580407000
Aufhngeschuh A
Galvanised
Length: 22 cm
Width: 13 cm
Height: 34 cm
12.0 588672000
Suspension profile AK
14.8 580595000
Aufhngeprofil AK
Galvanised
Length: 109 cm
300
20.8 588662000
Galvanised
Length: 100 cm
Folding platform K
[kg]
Article n
[kg]
Article n
33.2 588640000
Galvanised
19.1 588641000
Galvanised
Securing barrier XS
4.9 588669000
Galvanised
Length: 80 cm
16.5 588643000
Galvanised
Ladder cage exit XS
17.0 588666000
Galvanised
Height: 132 cm
301
Guard rails
Guard rail 1.10m
The guardrail 1.10m is the quick, easy way to erect a very dependable rail to cordon off
drops. The guard rail 1.10m can be used at the edges of slabs, around openings, to provide protection at other spots where a fall is possible, or as a back rail for wall formwork. The guard rail 1.10m is all-steel and hot-dip galvanised for enhanced durability.
Dependable side guards ...

along the edge of the slab, around openings or lift shafts
as a back rail for framed formwork
Easy to install ...

in soft concrete with the push-in or screw-in sleeve
by drilling into the post-set concrete
secured by a hex nut in the transverse hole of the framed panel
Safety around the edges of the slab during work on the Europark 2 shopping mall in Salzburg, Austria
302
Guard Rails
Handrail clamp S
The handrail clamp S attaches easily anywhere
along the timber formwork beam to provide safety
for the people working on the structure.
The clamp's range of adjustment is wide, so the
handrail clamp secures in a large variety of
situations on most building sites.
Versatility for use with ...

platforms
floor and wall formwork
concrete slabs
High flexibility ...

with the 45 holders, allowing the rails to be pushed in
from both directions
with a clamp range of adjustment from 2 to 45 cm
Easily attached ...

anywhere along the timber formwork beam
at the edge of finished concrete slabs
The handrail clamp S in use during

construction of the HZ Spar Shopping
Center in Salzburg, Austria
Handrail clamp T
The handrail clamp T offers safety from start to
finish: From pouring of the slab or the supporting
structure to installation of the permanent guard
rail. This clamp installs anywhere: On rebar hoops
or bridge end beam anchors- no adapters or other
add-ons needed!
Maximum safety ...

in bridge-building at the edge of the supporting
structure
as protection against falls for precast stairway flights
as a back rail for wall formwork
Practical fixing ...

to the rebar hoop of the supporting structure
with a bridge end beam anchor
directly to the sill, for example making use of the
anchors set for guide rails
Dependable as a rail to safeguard the edge
of the supporting structure. Gehannesboue
Bridge, Germany
303

[kg]
Article n
Doka Working
Guard
rails
and Protection Platforms
Handrail clamp S
11.5 580470000
Galvanised
Handrail clamp T
12.3 584381000
Galvanised
Handrail post 1.10m
5.6 584384000
Schutzgelnder 1,10m
Galvanised
Height: 134 cm
304
[kg]
Article n

Ladder system XS
Workers need safe routes and
ladders to reach their place of
work. Best practice is to have
ladders integrated into the
system.. That way the ladder
is always secure and always
ideally positioned. In terms of
safety, therefore, the approach
route to the pouring platform
or scaffold platform has optimised, integral safeguards.
Ladder System XS
The ladder system for safe working practices

in wall and column forming
System ladders with integral cages attach quickly and easily to Doka wall and
column formwork. These safety components can be secured to the formwork
elements while they are flat on the ground, before being lifted into position.
That means total safety right from the start of operations.
Maximum safety ...

for installing and stripping out the formwork
for working with rebars
for pouring the concrete and for all other tasks
Proven, practical design ...

makes installation easy
for compatibility with all Doka wall systems
facilitates straightforward, space-saving transportation
Use in combination with column formwork
Use in combination with wall formwork
307

[kg]
Article n
[kg]
Article n
Doka Working
Access
systemand
XS Protection Platforms
33.2 588640000

Galvanised
20.8 588662000
Galvanised
Width: 89 cm
Height: 63 cm
2.1 588664000
Galvanised
Length: 41 cm
Connector XS KS
19.1 588641000
13.2 580367000
Anschluss XS KS
Galvanised
Length: 115 cm
Galvanised
Connector XS RS
22.2 587955000
Anschluss XS RS
Galvanised
Length: 115 cm
Securing barrier XS
4.9 588669000
Galvanised
Length: 80 cm

Galvanised
Length: 100 cm
16.5 588643000
10.5 588670000
Rckenschutz XS
12.0 588672000

Galvanised
Galvanised
Length: 123 cm
Ladder adapter XS
5.0 588673000
Leiternfu XS
Ladder cage exit XS
17.0 588666000
Galvanised
Height: 132 cm
Galvanised
Length: 115 cm
308
10.0 588637000
11.2 588639000
Galvanised
Height: 50 cm


Components with a proven
on-site record are one
of the bases of our
formwork systems.
310
Formwork beams
Formwork sheets
Day in, day out, thousands of Doka's

solid-web formwork beams do reliable
service on building sites the world over.
For every site and every location.
Dokadur panels
Floor props
Eurex
Form ties
Suspension cones
Multi-trip
packaging
The high-grade, rentable

panel for floor-slab formwork
Dependable every time
For maximum safety without

compromises
For better on-site logistics
311
Formwork beams
Day in, day out, thousands of Doka's solid-web formwork beams do

sterling service on building sites the world over.
The innovative end reinforcement prevents

damage to the ends of the beams and significantly prolongs useful beam life
Doka beam H20 top

Built-in shock absorbers make these
beams up to three times more durable ...
Benefit from the advantages of this robust beam:
lower finishing costs
ends are sealed to protect against moisture and ultraviolet light
nailability
Positioning marks on the beam flanges for faster,

safer setup ...
The competitive edge by innovation

The optimum beam-end reinforcement was developed using new
computing models including
multiple-body simulation and
finite-element calculations.
The marks on all standard lengths ensure

rapidity, because the sizes are there to be seen
safety, because the installation is easily checked
Names and logos discourage theft and

encourage customer attention ...
Utilise the benefits of your own signage:
your company's material is readily identifiable
ideal means of discouraging potential thieves
ready-made advertising
Doka beam
H20 eco
High quality ...
from best care in production
from mechanical strength grading
Ends of beams bevelled and
secured by beam-rivets* for even
more strength
*Except beams of length 1.25m and
all special lengths
312
Formwork beams
[kg]
Article n
9.5
12.8
13.8
15.0
17.0
18.5
20.0
23.0
25.0
30.0
5.2
5.2
189011000
189012000
189013000
189014000
189015000
189016000
189017000
189018000
189019000
189020000
189010000
189021000
[kg]
Article n
8.6
10.2
12.6
13.7
17.2
20.7
189802000
189803000
189809000
189805000
189813000
189814000
Doka System
Formwork
beams
Components

Doka beam H20 top N .....m
Doka beam H20 top N .....m BS
Doka-Trger H20 top N
Varnished yellow
upright.

Doka beam H20 top P .....m
Doka beam H20 top P .....m BS
Doka-Trger H20 top P
9.9
13.2
14.3
15.6
17.7
19.2
20.8
23.9
26.0
31.2
5.4
5.4
Doka formwork beam H16 N 2.45m

Doka-Schalungstrger H16 N
Varnished yellow
upright.
Doka formwork beam H16 P 2.45m

Doka formwork beam H16 P .....m
Doka-Schalungstrger H16 P
189701000
189702000
189703000
189704000
189705000
189706000
189707000
189708000
189709000
189710000
189700000
189711000
10.4 189961000
4.3 189960000
Varnished yellow
upright.
Timber varnish yellow 5l

Holzlasur gelb 5l
5.0 176005000
Varnished yellow
upright.
Doka beam H20 eco N 1.25m

Doka beam H20 eco N .....m
Doka beam H20 eco N .....m BS
Doka-Trger H20 eco N
6.3
9.0
12.3
13.3
14.5
16.5
18.0
19.5
22.5
24.5
29.5
60.3
5.0
5.0
189282000
189283000
189271000
189272000
189273000
189284000
189285000
189276000
189286000
189277000
189287000
189288000
189299000
189289000
Varnished yellow
upright.
Doka beam H20 eco P 1.25m

Doka beam H20 eco P .....m
Doka beam H20 eco P .....m BS
Doka-Trger H20 eco P
6.5
9.4
12.7
13.8
15.1
17.2
18.7
20.3
23.4
25.5
30.7
46.8
5.2
5.2
189939000
189940000
189936000
189937000
189930000
189941000
189942000
189931000
189943000
189932000
189955000
189956000
189999000
189957000
Varnished yellow
upright.
313
Formwork sheets
For every site and every location
Doka has an extensive range of formwork sheets for the most varied
areas of application. All sheets are made of glue-bonded wood and
are extremely strong and dimensionally stable.
Strong top plies to help minimise cracking

Special middle ply to ensure maximised geometrical stability
Wood of consistently high quality with uniform coating for a
perfect result
ISO 9001 certification for invariably high
standard of quality
Your name and your logo

Announcing the name of your company and your logo, the Doka formwork
sheet 3-SO is the perfect advertising medium and at the same time it is
immediately identifiable as your property, so it is unlikely to become a target
for construction-site theft.
Formwork sheet 3-SO
Formwork sheet 3-S plus
Three-ply concrete-formwork sheet,

made of European spruce. Produces
a uniform concrete surface.
Three-ply concrete-formwork sheet,

made of European spruce (picea
abies), designed specially for building. Produces a uniform concrete
surface.
Surface:
Synthetic melamine resin glue
Bonding: Boilproof and weatherproof
Edges: Impregnating emulsion,
Doka yellow
Thicknesses: 21 and 27 mm
314
Technical specifications same as the

formwork sheet 3-SO, but PU-sealed
on one side with corundum sanding.
Other types of plywood and

coating are available on
request.
DokaplexMulti-ply sheet
High-grade multi-ply sheet made of
Finnish birch hardwood for use
again and again. Produces a highquality, smooth concrete surface.
Surface: Phenol-resin coating, 120 g/m2
Bonding: Boilproof and weatherproof
phenol-resin glue (BFU 100)
to DIN 68705-T3
Edges: Dispersion
Thickness: 21 mm
Formwork sheets
[kg]
Article n
5.3
7.9
10.5
13.1
15.8
18.4
21.0
23.6
26.3
28.9
31.5
10.5
15.8
21.0
26.3
31.5
36.8
42.0
47.3
52.5
57.8
63.0
7.9
10.5
13.1
15.8
186007000
186008000
186009000
186011000
186012000
186028000
186013000
186029000
186014000
186023000
186027000
186015000
186016000
186017000
186018000
186019000
186030000
186020000
186031000
186021000
186022000
186024000
186008100
186009100
186011100
186012100
[kg]
Article n
9.8
13.0
16.3
19.5
6.3
12.8
13.0
16.3
12.8
187140000
187141000
187142000
187143000
187144000
187145000
187141100
187142100
187145100

2.0
2.5
4.2
5.3
186109000
186110000
186107000
186108000

2.5
3.1
5.2
6.5
187052000
187053000
187050000
187051000
Doka System
Formwork
sheets
Components

Doka formwork sheet 3-SO 21mm 150/50cm BS

NORM B3023
bonding
purposes

6.5
9.8
13.0
16.3
19.5
22.8
26.0
29.3
32.5
35.8
39.0
13.0
19.5
26.0
32.5
39.0
45.5
52.0
58.5
65.0
71.5
78.0
9.8
13.0
16.3
19.5

NORM B3023
bonding
purposes
Doka formwork sheet 3-S eco 21mm 50/150cm

Doka formwork sheet 3-S eco 21mm 50/200cm BS
7.9
10.5
13.1
15.8
10.5
13.1
Doka-Schalungsplatte 3-S eco 21mm

NORM B3023
bonding
187007000
187008000
187009000
187011000
187012000
187028000
187013000
187029000
187014000
187023000
187027000
187015000
187016000
187017000
187018000
187019000
187030000
187020000
187031000
187021000
187022000
187024000
187008100
187009100
187011100
187012100

Doka-Schalungsplatte 3-S eco 27mm

NORM B3023
bonding

NORM B3023
bonding

NORM B3023
bonding
Dokaplex formwork sheet 9mm 250/150cm

Dokaplex-Schalungsplatte 9mm
24.4 185001000
29.3 185006000
Multi-ply formwork sheet

bonding (BFU 100) as per DIN
68705-P3)
High quality phenolic resin coating
Suitable as facing formwork for frequent use

47.3 185011000
56.7 185012000

68705-P3)
186090000
186091000
186092000
186093000
186091100
186092100

45.9 185007000
55.1 185002000
66.2 185003000

68705-P3)
Sealing agent for Dokaplex 1kg

Sealing agent for Dokaplex 3kg
Kantenlack fr Dokaplex
1.0 185020000
3.0 185021000
315

[kg]
Doka-Trenn in container of 1000l
Doka-Trenn in drum of 200l
Doka-Trenn in canisters of 25l
Doka-Trenn
Sprayer for Doka-Trenn

Doka-Trenn-Spritze
316
Article n
899.0 580911000
185.0 580912000
22.0 580913000
5.3 580914000
[kg]
Article n

Dokadur panels
The high-grade, rentable panel
for floor-slab formwork
Dokadur panels are the state-of-the-art for floor-slab panels.
All-round edge and surface sealing dependably protects the panel
against the wear and tear of everyday construction work.
Maximised number of reuses and

best-quality concrete surfaces ...
from special surface sealing by means of PUR varnish and melamine resin
coating with precision-metered corundum sanding
for maximum number of use cycles
for improved safety at work, because risk of slipping is reduced
from significantly reduced moisture absorption for much-reduced
discolouration, structuring and cracking
Big savings on costs ...

from easy cleaning of the surfaces, ready for the next use
from all-round edge protection made of high-grade PU
for exact edges with minimal cleaning
for low costs on account of easy and fast reconditioning of the edge
for speedy, straightforward cleaning with high-pressure cleaners
Your name and your logo...

Announcing the name of your company and your logo, the Dokadur panel is
the perfect advertising medium and at the same time it is immediately identifiable as your property, so it is unlikely to become a target for constructionsite theft.
The special polyurethane surround prevents

damage to the edges and ensures a long
working life.
Detail:
Surface
318
Dokadur panels
[kg]
Article n
11.0
13.8
11.0
13.8
186083000
186081000
186083100
186081100
[kg]
Article n
Doka System
Dokadur
panels
Components

Dokadur-Paneel 21

plastic surround.
for rental.

Dokadur-Paneel 27
13.5
16.9
13.5
16.9
187170000
187168000
187170100
187168100

plastic surround.
for rental.
Stacking strap 50
3.1 586156000
Stapelgurt 50
Powder-coated, blue
319
Floor props Eurex

Dependable every time
Doka floor props are the right choice for every application.
High load-bearing strength plus many practical details that help to
make handling easier.
Floor props Eurex 20 and Eurex 30 ...
d
teste
e
p
y
T
to
65
EN 10
for heights from 0.92 m to 7.00 m with uniform load-bearing strength

regardless of extended length
with carrying capacity rated to EN 1065 of 20 kN (Eurex 20)
and 30 kN (Eurex 30)
can be used immediately, without calculations and detailed planning
hot-dip galvanised for durability
Simplicity of handling ...

with forged nuts: the easy, dependable means of transferring high loads
with numbered pegging holes for setting quickly to the correct height
with special thread geometry for effortless height adjustment. Easy to
back off too: a few blows with a hammer are enough even when the
element is heavily loaded
because the pegs curve upward for less risk of injury
The aluminium floor

prop Eurex 60 ...
is the robust floor prop with 60 kN
carrying capacity up to 5.50 m
(heights up to 11.00 m with
reduced carrying force)
is the handy adjustable prop for
high wall formwork (extends to
over 13.00 m)
Floor props
[kg]
Article n
[kg]
Article n
Doka props
Floor
System Components
12.9 586086000
15.3 586087000
17.8 586088000
22.2 586089000
34.6 586090000
51.0 586139000



47.0 582650000
Aluminium
Galvanised

8.0 586096000
Powder-coated, blue
Aluminium
Length: 250 cm
Galvanised
Height: 92 - 150 cm
14.8 586092000
16.7 586093000
20.5 586094000
24.9 586095000
29.2 586119000


Galvanised
18.0 582651000
Coupler Eurex 60
8.6 582652000
Aluminium
Length: 100 cm
Diameter: 12.8 cm
11.7 586134000
13.0 586135000
15.3 586136000
19.1 586137000

Height: 227 - 4010 cm

Doka-Deckensttze Eco 20
Galvanised
Perm. capacity: 20 kN at any telescoping length to NORM B 4009
Floor prop extension 0.50m
Deckensttzenverlngerung 0,50m
Galvanised
5.5 586011000
321
Form ties
Suspension cones
Dependable ties and safe suspension points
are always crucial for the economical and
safe use of formwork.
For maximum safety

without compromises
Doka has a complete range of tried-and-tested form-tie solutions
and dependable suspension points for wall formwork, single-sided
formwork and climbing formwork in uncompromising quality for
maximum safety.
Doka tie rods and anchor accessories ...

provide safety through superb manufacturing quality
reduce labour costs for installing ties, because a hammer is all that is
needed for easy installation
are durable, robust and unaffected by dirt
Robustly dimensioned universal climbing cones...

ensure firm connections between structure and formwork
for safety on high structures
for all kinds of climbing formwork
For more information,

see Doka Climbing System
Safe suspension solutions for working and

protection platforms ...
with different attachments to suit the application
ideally matched to the carrying capacity of Doka working and protection
platforms
easy to install and reusable
For more information, see Working and

Protection Platforms
323
Doka form ties for walls
Anchoring accounts for a large proportion of the labour costs whenever formwork is set up for walls. This is where the easily installed
anchor systems from Doka show their strengths. They are durable
and unaffected by dirt. Fewer anchors have to be set, on account of
the high carrying capacity of the anchors in combination with Doka
wall formwork.
Anchoring wall formwork safely with only 2 system

components:
The Doka Super plate means that each anchor is easy to set and easy to
remove. A hammer is the only tool needed.
Doka tie rods are made of a special steel alloy for high tensile strength.
A self-cleaning thread facilitates speedy installation..
The Doka anchor systems

Anchor system
15.0
20.0
26.5
Perm. carrying capacity with

safety factor of 1.6 times
breaking load
Permissible carrying
capacity to DIN
90 kN
150 kN
250 kN
120 kN
220 kN
350 kN
Doka anchor accessories
Do not weld or heat anchors - risk of

fracture.
The Doka anchor range includes the ideal accessories, such as sleeves,
distance pieces and sealing plugs.
Plastic tube, universal cone, sealing plug
Fibre concrete tube, plug
Distance piece
324
Keeping a firm grip on single-sided formwork

Single-sided formwork has to transfer the high pressure of the concrete reliably to the
bottom slab. Doka supporting construction frames in combination with Doka stop anchors
or pigtail anchors absorb these forces reliably.
Anchorage with
stop anchor
Anchorage with
pigtail anchor
Stop anchor 15.0 or stop

anchor 20.0 can be used,
depending on the force
involved.
She-bolts 15.0 are used in

conjunction with pigtail
anchors 15.0 or she-bolts
20.0 with pigtail anchors
20.0, depending on the
load.
Examples for water-impermeable

anchorages
Anchorages are not waterproof unless the sleeves or anchor components that stay in
place are well keyed into the concrete. Doka supplies anchor components that form an
excellent key with the concrete.
Installed
Water stop G 15.0
Tie rod
Tie rod
Universal cone Fibre concrete tube
Tie rod
Anchor cone 15.0
Tie rod
Universal cone
Plug
Water stop 15.0
Water stop 15.0
Water stop G 15 0
Water stop 15.0
Anchor cone 15.0
Fibre concrete tube
Removed
Water stop 15.0
Plastic tube
325
Doka Express anchors

... The quick way of driving threaded fasteners with a hammer
The Express anchor is a Doka development, a fast, secure formwork
fastener designed for the practical needs of construction-site usage:
326
Bracing floor tables. Effortless, speedy installation.
Everything perfectly installed, and it's all done by hammers.

Ideal for securing props for wall formwork or for bracing floor tables
More safety, with optimised load-bearing strength for Doka formwork systems.
Highly economical - Express anchors are suitable for multiple use cycles.
The small coil is all that remains embedded in the concrete.
Perfect for securing props to

support wall formwork. Optimised load-bearing strength
for Doka systems.
Form ties / suspension cones

[kg]
Article n
[kg]
Article n
Doka System
Form
ties / suspension
Components
cones
Form tie system 15.0
Anchor plate 15/20

Tie rod 15.0mm galvanised .....m
Ankerstab 15,0mm
0.72
1.1
1.4
1.8
2.2
2.5
2.9
1.4
0.73
1.1
1.4
1.8
2.1
2.5
2.9
3.6
4.3
5.0
5.7
7.2
8.6
10.7
1.4
581821000
581822000
581823000
581826000
581827000
581828000
581829000
581824000
581870000
581871000
581874000
581886000
581876000
581887000
581875000
581877000
581878000
581888000
581879000
581880000
581881000
581882000
581873000

1.6: 120 kN
of fracture!
Wing nut 15.0
Flgelmutter 15,0
Superplatte 15,0
0.91 581966000
Galvanised
Height: 6 cm
Diameter: 12 cm
Width-across: 27 mm
1.6: 120 kN
195 kN)
Hexagon nut 15.0
Sechskantmutter 15,0
Ankerplatte 12/12
Angle anchor plate 12/18
1.3 581930000
Galvanised
1.6: 120 kN (mounted on steel),
45 kN (mounted on timber)
(mounted on steel), 30 kN (mounted
on timber)
1.3 581934000
Winkelplatte 12/18
Galvanised
1.6: 120 kN (mounted on steel)
on timber)
Fixing plate 15.0
0.15 581692000
Nagelblech 15,0
Galvanised
Diameter: 10 cm
Positioning cone 15.0 5cm
0.43 581969000
Vorlaufkonus 15,0 5cm
Galvanised
Length: 11 cm
Diameter: 3 cm
Tool: Positioning cone spanner 15.0
DK
Climbing cone 15.0 5cm
0.97 581980000
Kletterkonus 15,0 5cm
Galvanised
Length: 17 cm
Diameter: 6 cm
Width-across: 41 mm
Sealing sleeve 15.0 5cm
0.007 581990000
Dichtungshlse 15,0 5cm
Black
Length: 10 cm
Diameter: 3 cm
She-bolt 15.0 5cm

Ankerkopf 15,0 5cm
1.7 581972000
Galvanised
Length: 76 cm
Width-across: 24 mm
1.6: 120 kN
195 kN)
of fracture!
0.23 581964000
Galvanised
Length: 5 cm
Width-across: 30 mm
1.6: 120 kN
195 kN)
Anchor plate 12/12
Galvanised
1.6: 120 kN (mounted on steel),
45 kN (mounted on timber)
on timber)
0.31 581961000
Galvanised
Length: 10 cm
Height: 5 cm
Width-across: 27 mm
1.6: 120 kN
195 kN)
Super plate 15.0
1.8 581929000
Ankerplatte 15/20
She-bolt 15.0 5cm 1.20m

Ankerkopf 15,0 5cm 1,20m
2.5 581832000
Galvanised
Length: 131 cm
Width-across: 24 mm
1.6: 120 kN
195 kN)
of fracture!
327

[kg]
Cantilever positioning cone 15.0 5cm
Sperrenvorlauf 15,0 5cm
Article n
0.45 581699000
[kg]
Positioning disk M30
Sealing sleeve S 15.0 5cm
0.009 581697000
Dichtungshlse S 15,0 5cm
Galvanised
Diameter: 9 cm
Positioning clamp M30

Galvanised
Diameter: 4 cm
0.88 581971000
Aufhngekonus 15,0 5cm
Aufhngekonus 15,0 fr Isolierung bis 11cm

Galvanised
Length: 30 cm
Diameter: 5 cm
Sealing sleeve 15.0 f. insulation up to 11cm
Dichtungshlse 15,0 fr Isolierung bis 11cm

White
Length: 30 cm
Diameter: 6 cm
0.74 581895000
Galvanised
Length: 15 cm
Galvanised
Length: 16 cm
Diameter: 6 cm
Suspension cone 15.0 f. insulation up to 11cm
0.19 581833000
Vorlaufklemme M30
Black
Length: 11 cm
Diameter: 4.7 cm
Suspension cone 15.0 5cm
0.25 581975000
Vorlaufscheibe M30
Length: 11 cm
Diameter: 5 cm
DK
3.6 580495000
0.45 581896000
0.44 581890000
Length: 7 cm
0.05 580498000
Nailing cone 15.0
0.02 581897000
Nagelkonus 15,0
Black
Length: 7 cm
Hole plug 29mm

Cone screw RD 28
0.65 580496000
Konusschraube RD 28
Galvanised
Length: 9 cm
Diameter: 6 cm
Grey
Diameter: 3 cm
Zinc plug 15.0
Galvanised
Diameter: 9 cm
Stop anchor 15.0 11.5cm

Sperranker 15,0 11,5cm
Universal climbing cone 15.0

Universal-Kletterkonus 15,0
Cone screw B 7cm
Stop anchor 15.0 16cm

Sperranker 15,0 16cm
Dacromete coated
Length: 10 cm
Diameter: 7 cm
Width-across: 50 mm

Sealing sleeve K 15.0
0.03 581976000
Dichtungshlse K 15,0
Orange
Length: 12 cm
Diameter: 6 cm
328
1.0 581997000
Non-treated
of fracture!
Follow the fitting instructions!
Arrange extra reinforcement steel as
per statical requirement.
0.86 581444000
Konusschraube B 7cm
0.96 581868000
Non-treated
of fracture!
1.3 581977000
Galvanised
Length: 13 cm
Diameter: 5 cm
Tool: Spanner for universal climbing
cone 15.0/20.0
0.20 581889000
Galvanised
Length: 9.9 cm
Diameter: 2.9 cm
Tool: Spanner for 1/2" square head
0.25 580497000
Vorlaufscheibe RD 28
0.003 581891000
Gesimsankerstopfen 29mm
Zinkstpsel 15,0
Positioning disk RD 28
Article n
1.4 581999000
Non-treated
of fracture!

[kg]
Stop anchor double-ended 15.0 20cm
Sperranker beidseitig 15,0 20cm
Article n
1.1 581820000
Non-treated
of fracture!
Sonderlngen knnen unter der
Sonder-Art.-Nr. 580100000 unter
Angabe der Bezeichnung und der
gewnschten Lnge in mm bestellt
werden.
Pigtail anchor 15.0
[kg]
Water stop 15.0 33cm
Water stop S 15.0 33cm
Non-treated
Length: 67 cm
of fracture!
Wall anchor 15.0 15cm
Non-treated
Length: 33 cm
Diameter: 7 cm
Weight without tie rod
of fracture!
werden.
Water stop G 15.0 33cm
Non-treated
Length: 33 cm
Width: 12 cm
Height: 12 cm
of fracture!
werden.
Galvanised
Suspension cone 15.0 with collar

Bund-Aufhngekonus 15,0
1.4 580428000
Galvanised
Length: 16 cm
Diameter: 6 cm
Rock anchor spreader unit 15.0

Felsanker-Spreizeinheit 15,0
Felsanker-Einbaurohr
Fibre concrete plug 30.7mm

0.27 581120000
Concrete cone 52mm
Grey
Rod connector 15.0

Verbindungsmuffe 15,0
Water stop connector 15.0
0.52 581914000
Wasserstop 15,0
Non-treated
Length: 12 cm
0.49 581981000
Non-treated
Length: 11 cm
Diameter: 3 cm
1.6: 120 kN
195 kN)
of fracture!
0.85 581123000
Galvanised
Max. attainable tensioning force:
214 kN
0.19 581939000
Betonkonus 52mm
34.5 580570000
Vorspanngert B
581902000
581830000
581438000
581955000
Grey
Galvanised
Length: 50 cm
Diameter: 3 cm
Tensioning instrument B
0.03
0.02
0.10
0.16
Faserbetonstopfen
Non-treated
Length: 9 cm
Diameter: 4 cm
Before loading, check the loadability
of the anchoring points (different
types of rock or grades of concrete!)
Depth of borehole (3.7 or 3.8 cm) will
depend on the type of rock!
Rock anchor installation tube
1.0 581818000
Wassersperre G 15,0 33cm
1.5 581893000
Wandanker 15,0 15cm
1.3 581817000
1.2 581819000
Wassersperre 15,0
0.92 581984000
Wellenanker 15,0
Article n
Weldable coupler 15.0

Anschweimuffe 15,0
0.25 581691000
Non-treated
Length: 8 cm
Diameter: 3 cm
1.6: 120 kN
195 kN)
Safety instruction: Must not be welded with the tie-rod screwed in - risk of
rod breakage!
329

[kg]
Weldable coupler 15.0 for sheet wall
Article n
0.75 581693000
Anschweimuffe 15,0 fr Spundwand

Non-treated
Length: 10 cm
Height: 13 cm
Check on-site whether the wall thickness and quality of the steel walls are
sufficient for transferring the forces.
When welding work is performed on
the site, all applicable standards and
rules must be observed!
Anchor cone 15.0
[kg]
Anchor holder 15.0
Yellow
Length: 11 cm
Diameter: 6 cm
1.6: 120 kN
195 kN)
Plastic tube 22mm 2.50m
0.45 581951000
Kunststoffrohr 22mm 2,50m
0.43 581835000
Ankerhalter 15,0
Non-treated
Clearance cone 15.0
0.51 581865000
Freistellkonus 15,0
Black
Blue
Length: 20.6 cm
Diameter: 7 cm
0.46 581967000
Spannkonus 15,0

Vorlaufschlssel 15,0 DK
Universal-Konusschlssel 15,0/20,0
Galvanised
Length: 9 cm
Width-across: 50 mm
0.005 581995000
Galvanised
Length: 37 cm
Diameter: 8 cm
Grey
Diameter: 4 cm
Plug 22mm
0.003 581953000
Verschlussstopfen 22mm
Distance piece 20cm

Distance piece 25cm
Distance piece 30cm
Form tie load measuring device 300kN

Ankerlastmessgert 300kN
Grey
0.90 581448000
1.9 580594000
Universal-Konus 22mm
0.30 580579000
Galvanised
Length: 8 cm
Width-across: 30 mm

Universal cone 22mm
Article n
11.5 581834000
Galvanised
0.05 581907000
0.09 581908000
0.10 581909000
Distanzhalter
Grey
Fibre concrete tube 22mm 0.18m
0.28 581904000
0.36 581905000
0.44 581906000
0.61 581903000
1.9 581991000
Faserbetonrohr 22mm

Tie rod 20.0mm galvanised .....m
Ankerstab 20,0mm
0.02 581992000
Verschlussstpsel 22mm

REPOXAL two component adhesive
1.2 581993000
REPOXAL-Zweikomponenten Kleber
Sufficient for 350 plugs for fibre concrete tube 22mm.
330
1.3
1.9
2.5
3.2
3.8
5.0
2.5
1.3
1.9
2.5
3.8
5.0
2.5

1.6: 220 kN
of fracture!
581411000
581417000
581412000
581418000
581413000
581414000
581410000
581405000
581416000
581406000
581407000
581408000
581403000

[kg]
Hexagon nut 20.0
Article n
0.60 581420000
Galvanised
Length: 7 cm
Width-across: 41 mm
1.6: 220 kN
354 kN)
Anchor plate 20.0 12/12
[kg]
Galvanised
1.6: 220 kN
Super plate 20.0 B
Cone screw B 7cm
Galvanised
Height: 7 cm
Diameter: 14 cm
Width-across: 34 mm
1.6: 220 kN
354 kN)
She-bolt 20.0
5.6 581435000
Ankerkopf 20,0
Galvanised
Length: 140 cm
Diameter: 5 cm
Width-across: 41 mm
1.6: 220 kN
354 kN)
of fracture!
Anchoring cone 20.0
1.0 581437000
Ankerkonus 20,0
Galvanised
Length: 15 cm
Diameter: 5 cm
Tool: Key for positioning cone 20.0
Sealing sleeve 20.0
0.03 581441000
Dichtungshlse 20,0
Dacromete coated
Length: 10 cm
Diameter: 7 cm
Width-across: 50 mm
Wassersperre 20,0 33cm
1.7 581426000
Non-treated
Length: 33 cm
Diameter: 8 cm
of fracture!
werden.
0.03 581443000
Green
Length: 12 cm
Diameter: 6 cm

0.11 588923000
0.14 588924000
Faserbetonstopfen
Grey
Concrete cone 52mm
0.19 581939000
Betonkonus 52mm
Grey
Positioning disk M30
0.25 581975000
Vorlaufscheibe M30
Galvanised
Diameter: 9 cm
Positioning clamp M30
0.19 581833000
Vorlaufklemme M30
Galvanised
Diameter: 4 cm
Pigtail anchor 20.0

Wellenanker 20,0
2.0 581450000
Non-treated
Length: 76 cm
of fracture!
Grey
Length: 16 cm
Diameter: 5 cm
Water stop 20.0 33cm
0.86 581444000
Konusschraube B 7cm
2.0 581424000
Superplatte 20,0 B
1.2 581442000
Galvanised
Length: 13 cm
Diameter: 5 cm
cone 15.0/20.0
1.7 581425000
Ankerplatte 20,0 12/12
Article n

1.9 581452000
Non-treated
of fracture!

2.3 581453000
Non-treated
of fracture!
331

[kg]
Article n
0.59 581463000
[kg]
Form tie load measuring device 300kN
Ankerlastmessgert 300kN
Article n
11.5 581834000
Galvanised
Universal cone 26mm
0.008 581464000
Grey
Diameter: 5 cm

Plug 26mm
0.006 581465000
Verschlussstopfen 26mm
Grey
0.80 581460000
4.5 581883000
Ankerstab 26,5mm unbehandelt .....m

1.6: 350 kN
of fracture!
Diameter: 4 cm
Hexagon nut 26.5
0.73 581985000
Universal cone 32mm
Galvanised
Length: 8 cm
Width-across: 46 mm
0.008 581461000
Anchor plate 26.5
Grey
Diameter: 5 cm
Cone spanner 20.0
3.4 581986000
Ankerplatte 26,5
Galvanised
Length: 15 cm
Width: 12 cm
3.5 581471000
Konusschlssel 20,0
Galvanised
Length: 57 cm
Galvanised
Length: 9 cm
Width-across: 50 mm

Galvanised
Length: 12.6 cm
Diameter: 5 cm
cone 15.0/20.0
0.90 581448000
0.03 581998000
Violet
Length: 12 cm
Diameter: 6 cm
1.9 580594000
Galvanised
Length: 37 cm
Diameter: 8 cm
1.1 581987000
Rod connector 26.5
1.4 581988000
Verbindungsmuffe 26,5
Non-treated
Length: 15 cm
Width-across: 46 mm
Anchor holder 20.0
0.43 581427000
Ankerhalter 20,0
Pigtail anchor 26.5
Non-treated
3.6 581900000
Wellenanker 26,5
Non-treated
Length: 80 cm
of fracture!
Clearance cone 20.0
0.49 581866000
Freistellkonus 20,0
Black
Yellow
Length: 20.6 cm
Diameter: 7 cm
332
Galvanised
Length: 9 cm
Width-across: 50 mm
0.90 581448000

[kg]
Concrete cone 52mm
Article n
0.19 581939000
Betonkonus 52mm
Grey
[kg]
Article n
Accessories for fair-faced concrete

Exposed concrete distance piece 20cm
Sichtbeton-Distanzhalter
0.06 581843000
0.07 581844000
0.07 581845000
Grey
1.7 580593000
Galvanised
Length: 37 cm
Diameter: 8 cm
Anchor holder 26.5
0.43 581943000
Ankerhalter 26,5
Exposed concrete universal cone 22mm

Sichtbeton-Universalkonus 22mm
Grey
Non-treated
Exposed concrete plug 22mm plastic

Exposed concrete plug 22mm concrete
Clearance cone 26.5
0.46 581867000
Freistellkonus 26,5
0.01 581842000
Black
Grey
Length: 20.6 cm
Diameter: 7 cm
Sichtbetonstopfen
Grey
Sealing disk 43
Sealing disk 50
Sealing disk 53
0.002 581836000
0.003 581837000
0.003 581838000
Dichtscheibe
0.01 581847000
0.02 581846000
Black
6.5 582914000
Ankerstab 32,0mm unbehandelt .....m

of fracture!
Sealing string D2cm 350m
4.4 581839000
Dichtschnur D2cm 350m
Adhesive tape PVC 50mm 33m
0.32 581841000

0.07 581840000
0.17 580348000
Bauklebeband PVC 50mm 33m
Hexagon nut 32.0
1.9 582915000
Non-treated
Length: 10.5 cm
Width-across: 60 mm
Anchor plate 32.0
Dichtungsband KS
Weight per roll
4.0 582916000
Ankerplatte 32,0
Exposed concrete positioning cone 15.0 5cm

Sichtbetonvorlauf 15,0 5cm
Galvanised
Length: 11 cm
Diameter: 4.3 cm
DK
Non-treated
Length: 15 cm
Width: 15 cm
Anchoring cone 32.0
8.0 582917000
Ankerkonus 32,0
Square spanner 32.0
Exposed concrete positioning cone MF 15.0

Sichtbetonvorlauf MF 15,0
Non-treated
Length: 22.5 cm
Diameter: 10 cm
0.46 581973000
1.5 581928000
Galvanised
Length: 12.6 cm
Diameter: 5.3 cm
cone 15.0/20.0
4.0 582918000
Vierkantschlssel 32,0
Galvanised
Length: 59 cm
333
Multi-trip
packaging
For better on-site logistics
Multi-trip packaging such as containers, stacking pallets and

skeleton transport boxes keep everything in place on the site, minimise time wasted searching for parts, and streamline the storage
and transport of system components, small items and accessories.
Stacking pallets 150 and 120 simplify the

storage and transport of floor props, removable folding tripods, formwork beams
and Dokadur panels. The clamp-on wheels
make the stacking pallets mobile, so they
can easily be steered through standard
door-size openings in residential accommodation projects.
Savings on material overheads and labour

costs ...
through faster loading and unloading of system components, small items
and accessories
through easy relocation to the next point where the parts are needed
through safe storage in stacks, particularly when space is at a premium
The skeleton transport boxes keeps light

accessories tidy and easy to find.
(max. load-bearing capacity 700 kg)
Heavy accessories are best stored in the

multi-trip container
(max. load-bearing capacity 1500 kg)
The clamp-on wheels make the

multi-trip containers mobile, and
save on crane time for shifts from
place to place on the same level.
334
Multi-trip packaging
[kg]
Article n
[kg]
Article n
Doka System
Multi-trip
packaging
Components
Doka multi-trip transport box 1.20x0.80m
75.0 583011000
Doka-Mehrwegcontainer 1,20x0,80m
Galvanised
Height: 78 cm
Max. load: 1500 kg
Stacking strap 50
3.1 586156000
Stapelgurt 50
Powder-coated, blue
Frami pallet 1.20m
68.0 588478000
Frami-Palette 1,20m

Galvanised
Length: 138 cm
Width: 100 cm
Height: 114 cm
Max. load: 800 kg
42.0 586151000
Galvanised
Height: 77 cm
Max. load: 1100 kg
Frami pallet 1.50m
74.0 588476000
Frami-Palette 1,50m
Doka accessory box
Galvanised
Length: 168 cm
Width: 100 cm
Height: 114 cm
Max. load: 800 kg
106.4 583010000
Doka-Kleinteilebox

Length: 154 cm
Width: 83 cm
Height: 77 cm
Max. load: 1000 kg
Alu-Framax pallet
126.7 588396000
Alu-Framax-Palette

Galvanised
Length: 280 cm
Width: 110 cm
Height: 107 cm
Max. load: 1200 kg
39.5 583016000
Galvanised
Height: 77 cm
Max. load: 1000 kg
Pallet for platform brackets M

Bolt-on castor set
33.5 586154000
Anklemm-Radsatz
consisting of:
Palette fr Bhnenkonsolen M
Galvanised
Length: 146 cm
Width: 115 cm
Height: 156 cm
Max. load: 600 kg

2 pcs.
Height: 23 cm

2 pcs.
Height: 32 cm
Painted blue
Max. load: 1100 kg
Doka skeleton transport box 1.70x0.80m

Doka-Gitterbox 1,70x0,80m
87.0 583012000
Galvanised
Height: 113 cm
Max. load: 700 kg
74.9 580549000
Pallet for Staxo/Aluxo

Doka-Traggerstpalette
64.6 582783000
Galvanised
Length: 180 cm
Width: 120 cm
Height: 29 cm
Max. load: 700 kg
335
Doka international
sterreichische Doka
Schalungstechnik GmbH
Reichsstrasse 23
3300 Amstetten
Austria
Tel. +43 (0) 7472 605-0
Fax +43 (0) 7472 64430
E-Mail: Oest.Doka@doka.com
Internet: www.doka.com
Subsidiaries and representatives
(in alphabetical order)
Belgium
Doka N.V.
Handelsstraat 3
1740 Ternat
Tel. +32 (0)2 582 02 70
Fax +32 (0)2 582 29 14
E-Mail: Belgium@doka.com
Brazil
Doka Brasil
Frmas para Concreto Ltda.
Rua Guilherme Lino dos Santos, 800
- Jardim Flr do Campo CEP 07.190-010
Guarulhos - SP
Tel. +55 (0)11 6404-3500
Fax +55 (0)11 6404-5700
E-Mail: Brasil@doka.com
Internet: www.doka.com.br
Germany
Deutsche Doka
Frauenstrasse 35
82216 Maisach
Tel. +49 (0)8141 394-0
Fax +49 (0)8141 394-6183
E-Mail: Deutsche.Doka@doka.com
Kuwait
Doka Kuwait
Div. of Riham Gen. Trad. & Cont. Co.
P.O. Box 2217 Salmiyah
22023 Kuwait
Tel. +965 482 24 62
Fax + 965 482 24 72
E-Mail: Kuwait@doka.com
Great Britain
Doka UK
Formwork Technologies Ltd
Monchelsea Farm, Heath Road
Boughton Monchelsea
Maidstone, Kent, ME17 4JD
Tel. +44 (0)1622 74 90 50
Fax +44 (0)1622 74 90 33
E-Mail: UK@doka.com
Lebanon
sterreichische Doka
Doka Branch Lebanon
Sodeco Square
Block C / 9th floor
Beirut
Tel. +961 (0)1 61 25 69
Fax +961 (0)1 61 25 70
E-Mail: Lebanon@doka.com
Croatia
Doka Zagreb
Oplatna tehnika d.o.o.
Radnicka cesta 173/g
10 000 Zagreb
Tel. +385 (0)1 2480 020
Fax +385 (0)1 2480 025
E-Mail: Zagreb@doka.com
Greece
Doka Hellas
Kaloupotechniki Technologiki A.E.
Agiou Athanasiou 5
153 51 Pallini / Attiki
Tel. +30 210 6669 211
Fax +30 210 6032 614
E-Mail: Hellas@doka.com
Internet: www.doka.gr
Czech Republic
Cesk Doka
bednc technika spol. s.r.o.
Za Avi 868
196 00 Praha 9 - Cakovice
Tel. +420 284 001 311
Fax +420 284 001 312
E-Mail: Ceska@doka.com
Internet: www.ceskadoka.cz
Hungary
Magyar Doka
Zsalutechnika Kft.
Trkk u. 5-7.
1037 Budapest
Tel. +36 1 436 7373
Fax +36 1 368 6044
E-Mail: Magyar@doka.com
Internet: www.doka.hu
Finland
Doka Finland Oy
Selintie 542
03320 Selki
Tel. +358 (0)9 224 2640
Fax +358 (0)9 224 26420
E-Mail: Finland@doka.com
Ireland
Doka Ireland
Formwork Technologies Ltd.
Tinure Industrial Complex
Monasterboice, Drogheda
County Louth
Tel. +353 (0)41 686 1620
Fax +353 (0)41 686 1525
E-Mail: Ireland@doka.com
France
Doka France SAS
3, chemin des Iles, Z.I.
78610 Le Perray en Yvelines
Tel. +33 (0)1 34 84 27 27
Fax +33 (0)1 34 84 27 00
E-Mail: France@doka.com
Internet: www.doka.fr
336
Italy
Doka Italia S.p.A.
Strada Provinciale Cerca, 23
20060 Colturano (MI)
Tel. +39 02 98 27 6.1
Fax +39 02 98 23 75 77
E-Mail: Italia@doka.com
Internet: www.doka.it
Latvia
SIA "Doka Latvia"
Ganbu dambis 36 - 805
1005 Riga
Tel. +371 738 25 25
Fax +371 739 14 50
E-Mail: Latvia@doka.com
Netherlands
Doka Nederland BV
Bekistingen
Longobardenweg 11
5342 PL Oss
Tel. +31 (0)412 65 30 30
Fax +31 (0)412 65 30 31
E-Mail: Nederland@doka.com
Norway
Doka Norge AS
Heggstadmoen 4
7080 Heimdal
Tel. +47 72 89 38 10
Fax +47 72 89 38 11
E-Mail: Norge@doka.com
Poland
Doka Polska Sp. z o.o.
woj. mazowieckie
ul. Bankowa 32
05-220 Zielonka
Tel. +48 (0)22 771 08 00
Fax +48 (0)22 771 08 01
E-Mail: Polska@doka.com
The Doka Group's central

plant at Amstetten, Austria
Subsidiaries and representatives

Portugal
Doka Portugal Cofragens Lda.
Zona Industrial da Abrunheira
Sintra Business Park
Edifcio 1, 1. M
2710-089 Sintra
Tel. +351 21 911 26 60
Fax +351 21 911 20 11
E-Mail: Portugal@doka.com
Slovakia
Doka Slovakia
Debniaca technika s.r.o.
Ivansk cesta 28
821 04 Bratislava 2
Tel. + 421 (0)2 4342 1426
Fax + 421 (0)2 4820 2120
E-Mail: Slovakia@doka.com
Internet: www.doka.sk
Qatar
Doka Qatar WLL
P.O. Box 23439
Doha
Tel. +974 450 06 28
Fax +974 450 06 08
E-Mail: Qatar@doka.com
Slovenia
Doka Slovenija
opazna tehnologija d.o.o.
Spodnji Plavz 14 d
4270 Jesenice
Tel. +386 (0)4 5834 400
Fax +386 (0)4 5834 404
E-Mail: Slovenija@doka.com
Romania
S.C. Doka Romnia
Tehnica cofrajelor S.R.L.
Calea Bucuresti, nr. 4
Comuna Tunari, sat Tunari
077180 Judet Ilfov
Tel. +40 (0)21 206 49 50
Fax +40 (0)21 206 49 99
E-Mail: Romania@doka.com
Russia
OOO Doka Rus
ul. Bolschaja Sadowaja, 8
123001 Moskau
Tel. +7 495 650 99 22
Fax +7 495 650 12 78
E-Mail: Moscow@doka.com
Internet: www.doka-opalubka.ru
Saudi Arabia
Mahmoud Othman Est.
Doka Division
P.O. Box 7620
Jeddah 21472
Tel. +966 (0)2 669 10 08
Fax +966 (0)2 664 86 25
E-Mail: Jeddah@doka.com
Riyadh
Doka Formwork Technology
Div. of Mahmoud Othman Est.
P.O. Box 20647
Riyadh 11465
Tel. +966 (0)1 479 10 03
Fax +966 (0)1 477 54 16
E-Mail: Riyadh@doka.com
Dammam
Doka Formwork Technology
Div. of Mahmoud Othman Est.
P.O. Box 60120
Dammam 31545
Tel. +966 (0)3 832 06 06
Fax +966 (0)3 832 31 93
E-Mail: Dammam@doka.com
South Africa
Doka South Africa
CNR Saxenburg & Wimbeldon Rd.
7537 Blackheath
PO Box 305 - Kuilsriver 7579
Cape Town
Tel. +27 (0)21 905 3295/6
Fax +27 (0)21 905 4745
E-Mail: South-Africa@doka.com
Spain
Doka Espaa Encofrados, S.A.
Central Madrid
Polgono Industrial Aimayr
Calle Acero 4 y 13
28330 San Martn de la Vega
Tel. +34 91 685 75 00
Fax +34 91 685 75 01
E-Mail: Espana@doka.com
Internet: www.doka.com/es
Sweden
Doka Sverige AB
Kurdsvgen 20
451 55 Uddevalla
Tel. +46 (0)522 65 66 30
Fax +46 (0)522 65 66 39
E-Mail: Sverige@doka.com
Internet: www.doka.se

Doka Gulf FZE
P.O. Box 61407
Jebel Ali Free Zone
Dubai
Tel. +971 (0)4 881 80 96
Fax +971 (0)4 881 80 97
E-Mail: Emirates@doka.com
USA
Doka USA, Ltd.
Corporate Headquaters
214 Gates Road
Little Ferry, New Jersey 07643
Tel. +1 201 329 7839
Fax +1 201 641-6254
E-Mail: usa@doka.com
Internet: www.dokausa.com
Algeria
Bahrain
Bulgaria
Canada
China
Denmark
Estonia
Guatemala
Iceland
Iran
Israel
Japan
Jordan
Korea
Libya
Lithuania
Luxemburg
Malaysia
Mexico
Morocco
New Zealand
Senegal
Serbia
Singapore
Switzerland
Taiwan
Thailand
Tunisia
Vietnam
Turkey
Doka Kalip-Iskele
Sanayi ve Ticaret A.S.
Baris Mahallesi
Dr. Zeki Acar Cad. No. 10
41400 Gebze, Kocaeli
Tel. +90 (0)262 642 02 65
Fax +90 (0)262 642 82 99
E-Mail: Turkiye@doka.com
Ukraine
Doka Ukraine t.o.v.
Pr. Herojiw Stalinhrada, 20 a
04210 Kiew
Tel. +380 (0)44 531 38 93
Fax +380 (0)44 413 68 45
E-Mail: Ukraine@doka.com
337
Article n 931142001
www.doka.com

Components Catalouge

Uploaded by

Copyright:

Available Formats

Components Catalouge

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Components Catalouge

Uploaded by

Copyright:

Available Formats

What products does Doka offer?

What products does Doka offer?

What services does Doka provide?

What services does Doka provide?

04/2007 e 04/2005

Build on formwork expertise

Products, know-how, service

Brochure, 2007 edition

Doka - The Formwork Experts

Doka. Formwork expertise for

Doka. Your requirements.

Doka Formwork planning

Doka advisors and site foremen

Doka Wall System

Large-area formwork Top 50

Doka Floor System

Doka Climbing System

Doka Load-bearing Towers

Working and Protection Platforms

Doka System Components

Doka - The Formwork Experts

The international network which cross-links all our locations, is

Sutong Chang Jiang Bridge,

Doka - The Formwork Experts

Eleven Towers at Business Bay,

Hilton Hotel Manchester,

Bridge over the Lavant Valley,

Doka - The Formwork Experts

Doka. Forming the future!

Doka. Formwork expertise

Doka - The Formwork Experts

Doka. The name for quality

Doka - The Formwork Experts

Doka. Your requirements

Simultaneously, our development engineers study and

Doka - The Formwork Experts

Doka - The Formwork Experts

Doka formwork planning. We accompany

Optimised formwork engineering based on

Doka - The Formwork Experts

Doka Ready-to-Use service.

Our specialists in the Ready-to-Use service build every

Avoidance of delays and unplanned extra costs

Doka - The Formwork Experts

Doka expert advisers and site foremen.

At Doka, co-operation starts with an awareness for and understanding of

We understand the manifold

Doka - The Formwork Experts

Doka on-site final inspection.

Transparency and immediate

Doka - The Formwork Experts

Doka Reconditioning service.

Doka - The Formwork Experts

Practical tips for the most efficient use of formwork

Doka Wall System

The Doka Wall System

For large-area forming using

The complete wall formwork

80 (with anchor system 20,0)

Panel heights [cm]

67,5 (40) | 60 (40)