Fluid Laboratory: Experiment of Verification of Bernoulli's Equation
Fluid Laboratory: Experiment of Verification of Bernoulli's Equation
Fluid Laboratory: Experiment of Verification of Bernoulli's Equation
Bernoulli's Apparatus
Experimental Procedure.
1. Start the pump and initiate a flow of water through the test section. Regulate the
flow to the inlet head tank so that there is a small but steady overflow from
(Constant Head Inlet Tank). Adjust the swivel tube of the outlet tank to obtain a
differential head of 50mm.
2. Measure the height of the water level in each manometer tube by marking the
paper positioned behind the tubes and record on the test sheet. Measure the
time taken to fill the bench measuring tank from zero to 10 liters and record.
3. Increase the differential head between the inlet and outlet head tanks by 50mm
increments, until the water level in the centre manometer tubes drops off the
scale. For each condition record the heights of liquid in the manometer tubes by
once again marking the paper positioned behind the tubes and measure the flow
rate.
Results and Analysis.