Grasa Kluber Asonic Ghy 72
Grasa Kluber Asonic Ghy 72
Grasa Kluber Asonic Ghy 72
Description:
Pack sizes:
400-g cartridge
1-kg can
25-kg bucket
high purity
low noise
long shelf life
high resistance to water
good corrosion protection
Time/temp.
h / C
70 ACM 121433
75 FKM
585
72 NBR
902
81 VMQ
542
168 / 150
168 / 150
168 / 100
168 / 100
Medium
Application:
ASONIC GHY 72 is particularly
beneficial for the long-term or
lifetime lubrication of parts exposed
to a wide service temperature
range, e.g. ball bearings in electric
motors, fans, air conditioners,
automobile generators, computers,
CD drives as well as household
appliances and office equipment.
ASONIC GHY 72
ASONIC GHY 72
ASONIC GHY 72
ASONIC GHY 72
ASONIC GHY 72
Change
in
volume
(%)
14
1.7
12
4
Tensile
strength
(%)
15
8
16
12
Elongation at
break
(%)
29
35
3
14
Application notes:
The lubricant is applied by means
of a spatula, brush, grease gun or
grease cartridge. For use in automatic lubricating systems, the
pumpability of the lubricant should
be checked.
Certain polyurea greases solidify
during elongated periods of storage.
Normally, such increase in
consistency does not affect the
performance of the lubricating
grease and is reversible when the
grease is subjected to shearing or
working stress.
Shore
hardness
A
14
2
6
6
40 to 180
Colour
beige
> 250
250 to 280
0 90
0/1
70
9.4
Speed factor*** for deep groove ball bearings, (n x dm) mm/min. approx.
700,000
< 1,000
< 100
> 1,000
**
Service temperatures are guide values which depend on the lubricants composition, the intended use and the application
method. Lubricants change their consistency, apparent dynamic viscosity or viscosity depending on the mechanodynamical loads, time, pressure and temperature. These changes in product characteristics may affect the function of a
component.
Klber viscosity grades: EL = extra-light lubricating grease; L = light lubricating grease; M = medium lubricating grease;
S = heavy lubricating grease; ES = extra-heavy lubricating grease
*** Speed factors are guide values which depend on the type an size of the rolling bearing type and the local operating
conditions, which is why they have to be confirmed in tests carried out by the user in each individual case.
ASONIC GHY 72
Safety Data Sheet
9.
08.03.2000
3.
Hazards identification
No particular hazards known
4.
5.
Fire-fighting measures
Suitable extinguishing media: Water spray, foam, dry powder,
carbon dioxide (CO2)
Unsuitable extinguishing media: High volume water jet
Special Hazards: In case of fire the following can be released: Carbon
monoxide, hydrocarbons
Special protective equipment for firefighters: Standard procedure for
chemical fires
Additional information: Water mist may be used to cool closed
containers. In the event of fire and/or explosion do not breathe fumes
6.
7.
8.
The data in this product information is based on our general experience and knowledge at the time of printing and is intended to give information of possible applications to a
reader with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary tests with the
selected product. We recommend contacting our Technical Consulting Staff to discuss your specific application. If required and possible we will be pleased to provide a sample
for testing. Klber products are continually improved. Therefore, Klber Lubrication reserves the right to change all the technical data in this product information at any time
without notice.
Klber Lubrication Mnchen KG, a member of the Freudenberg group