Course Syllabus EGS 2122C

Course Syllabus EGS 2122C
Geometric Dimensioning & Tolerancing (EGS 2122C)

Instructor:
Class Location:
Class Time:
Office Hour:
Office:
Phone:
Fax:
Email:
Alessandro Anzalone
Room 215, BSSB
Mondays and Wednesdays 8:00-9:55 am
Wednesdays 3:00-4:00 pm
BSSB 213e
(813) 253-7852
(813) 253-7868
aanzalone2@hccfl.edu
Course Description:
This course provides the fundamentals of geometric dimensioning and tolerancing
(GD&T) as based on the American Society of Mechanical Engineers standard ASME
Y14.5m-1994. The coverage of topics includes geometric tolerancing symbols and terms,
the rules of geometric dimensioning and tolerancing, datums, material condition symbols,
tolerances of form, profile, orientation, run-out, and location tolerances.
Course Outcomes:
1. The student will demonstrate an understanding of terms, modifiers, and symbols
used in geometric tolerancing.
2. The student will demonstrate an understanding of the concepts involved in
defining the form of a part surface.
3. The student will demonstrate and understanding of the datum system.
4. The student will demonstrate an understanding of the fundamental concepts of
tolerance of position.
5. The student will demonstrate an understanding of the concentricity and symmetry
controls.
6. The student will demonstrate an understanding of the concepts involved with the
run-out controls.
7. The student will demonstrate an understanding of the concepts involved with
using profile tolerancing.
Textbook and Materials:
Fundamentals of Geometric Dimensioning & Tolerancing, 2nd ed., Krulikowski, Delmar
Publishers, 1998. ISBN 0-8273-7995-1 and Fundamentals of Geometric Dimensioning &
Tolerancing, Exercise Workbook, 2nd ed., Krulikowski, Effective Training Inc. ISBN 0924520-16-7.
Calculator and engineering drawing paper.
Academic Dishonesty Policy: All parties identified as cheating or plagiarizing on an
exam, project or assignment will be assigned a grade zero on that item and subject to
academic discipline in accordance with HCC policy.
Hillsborough Community College
Page 1 of 3
Attendance Policy: It is important that you attend every class period and be on time.
Missing class means that you miss some important material. Since this course is a
cumulative experience, you will put yourself at an extreme disadvantage.
1. It is your responsibility to sign the attendance sheet provide at every class
meeting.
2. If you are absent, it is your responsibility to get announcements, materials, and
assignments before the next class period.
3. More than 3 absences per semester are considered excessive and will result in
points taken off your final grade for the unexcused absences after the third
absence. Please note that excused absences must be documented and may be
death or illness of family members, personal illness, military duty, car trouble,
etc.
Instructional Methods (including Examination Policies):
This course combines traditional lecture with hands-on laboratory experiences.
Students will be evaluated with regular homework assignments, in-class assignments,
class participation, laboratory exercises, midterm, and final exam.
1. Unexcused absences on test day will receive a zero for that test.
2. Tests will be closed book closed notes. Reference materials will be provided if
required.
3. Tests will be short answer, T/F, multiple choices, and some problems.
4. Please contact me by email or phone if at all possible before the time of the test
(leave a voice message) in the vent you have to miss a test.
5. No retests will be given for any exams that have been taken.
6. Every student will be required to take the final exam.
7. Make up tests from excused illnesses must be made up within 2 weeks of the
absence and the test may be of a different format than the class test.
8. If you are auditing this class, it must be declared at registration.
9. Some work will be competency-based and assed accordingly.
Grading System: The final grades will be determined on the following basis:
90 - 100 A
80- 89 B
70 - 79 C
60 - 69 D
0 - 59 F
Request for Accommodations: If, to participate in this course, you require an
accommodation due to a physical or learning impairment, you must contact the Office of
Services to Students with Disabilities. The office is located in the BSSB 109. You may
also reach the office by telephone at (813) 253-7914.
Page 2 of 3
Class Schedule
Date
Aug 24
Aug 26
Aug 31
Sep 2
Sep 7
Sep 9
Sep 14
Sep 16
Sep 21
Sep 23
Sep 28
Sep 30
Oct 5
Oct 7
Oct 12
Oct 14
Oct 19
Oct 21
Oct 26
Oct 28
Nov 2
Nov 4
Nov 9
Nov 11
Nov 16
Nov 18
Nov 23
Nov 25
Nov 30
Dec 2
Dec 7
Dec 9
Dec 14
Chapter
Introduction
Chapter 1: Engineering Drawings and Tolerancing
Labor Day (no class)

Chapter 1: Engineering Drawings and Tolerancing (contd.)
Chapter 2: Introduction to Geometric Tolerancing
Symbols and Terms
Chapter 3: Rules and Concepts of GD&T
Chapter 4: Form Controls
Chapter 5: Datums (Planar)
Chapter 6: Datums (Axis and Centerplane)
Midterm
Chapter 7: Orientation Controls
Chapter 8: Tolerance of Position, Part 1
Chapter 9: Tolerance of Position, Part 2
Veterans Day (no class)
Chapter 10: Concentricity and Symmetry Controls
Chapter 11: Runout Controls
Chapter 12: Profile Controls
Assignment
Read Chapter 1
Questions and
Problems, all
Questions and
Problems, all
Questions and
Problems, all
Questions and
Problems, all
Questions and
Problems, all
Questions and
Problems, all
Questions and
Problems, all
Questions and
Problems, all
Questions and
Problems, all
Questions and
Problems, all
Questions and
Problems, all
Questions and
Problems, all
TBA
Final Exam
Page 3 of 3

Course Syllabus EGS 2122C

Uploaded by

Copyright:

Available Formats

Course Syllabus EGS 2122C

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Course Syllabus EGS 2122C

Uploaded by

Copyright:

Available Formats

Course Syllabus EGS 2122C

Geometric Dimensioning & Tolerancing (EGS 2122C)

Hillsborough Community College