RR250 - C40B Omm
RR250 - C40B Omm
RR250 - C40B Omm
EXPORT CONTROLLED
TABLE 606
Inspection Checksheet
Date
Owner
A/C Make/Model
S/N
Engine S/N
TSN
Reg No.
TSN
TSO
This inspection checksheet is to be used when performing scheduled inspections. This form
can be locally reproduced and/or expanded to reflect the aircraft operating environment.
Keep the completed sheets as a permanent part of the aircraft engine records. Detailed
information regarding each inspection item is contained in the referenced Operation and
Maintenance Manual paragraphs.
CAUTION: BEFORE UNDERTAKING INSPECTION OR MAINTENANCE ACTION, CONSULT THE REFERENCED PARAGRAPHS OF THE OPERATION AND MAINTENANCE MANUAL. FAILURE TO FOLLOW THE RECOMMENDED INSTRUCTIONS IN THE MANUAL COULD RESULT IN EQUIPMENT DAMAGE
OR DESTRUCTION, POSSIBLY RESULTING IN PERSONNEL DEATH OR INJURY.
NOTE:
NOTE:
COMPLIANCE TO THE 150 HOUR AND 300 HOUR ITEMS IN THIS TABLE
MUST BE PERFORMED AT LEAST EVERY 12 CALENDAR MONTHS OR BY
HOURS, WHICHEVER OCCURS FIRST.
REFERENCE SECTION
Initial
72--00--00
ECOPYRIGHT 1996, 2013 Rolls--Royce Corporation
Page 613
Dec 15/12
Rolls--Royce
EXPORT CONTROLLED
Table 603
Inspection Checksheet
Date
Owner
A/C Make/Model
S/N
Engine S/N
TSN
Reg. No.
TSN
TSO
This inspection checksheet is to be used when performing scheduled inspections. This form can be locally
reproduced and/or expanded to reflect the aircraft operating environment. Keep the completed sheets as
a permanent part of the aircraft engine records. Detailed information regarding each inspection item is
contained in the referenced Operation and Maintenance Manual paragraphs.
CAUTION:
Compliance to the 150 Hour and 300 Hour Inspection items in this table must be performed at least every
12 calendar months or by the stated hours, whichever occurs first.
Item Inspection/Maintenance Action
REFERENCE SECTION
Initial
Inspect the engine fuel system for evidence of leakage. 72--40--00, Table 203
Check condition and security of fittings and tubing.
72--00--00
ECOPYRIGHT 1996, 2013 Rolls--Royce Corporation
Page 607
Dec 15/13
EXPORT CONTROLLED
Rolls--Royce
9.A
10
11
Initial
that can have drained into the gearbox from the oil
tank. Failure to completely scavenge the oil from the
gearbox will cause a false indication of high oil
consumption. See Post Flight Check No. 3
NOTE: Check oil supply level within 15 minutes of engine shutdown.
Inspect for extension of impending oil filter
72--60--00, para 1.C.
bypass indicator. If indicator is extended, clean oil
filter.
72--00--00
ECOPYRIGHT 1996, 2013 Rolls--Royce Corporation
Page 608
Dec 15/09
Rolls--Royce
EXPORT CONTROLLED
REFERENCE SECTION
Initial
13
14
72--40--00, para 3.
16
18
a.
b.
20
74--20--02, para 2.
72--00--00
ECOPYRIGHT 1996, 2013 Rolls--Royce Corporation
Page 609
Dec 15/09
Rolls--Royce
EXPORT CONTROLLED
REFERENCE SECTION
Initial
23
24
25
7.C.
3.D.
72--00--00, para
73--25--01, para 2
7.C.
73--25--01, para 2
27
Visually inspect the outer combustion case (sheet metal 74--40--00, para 2.B.(1),
and weld seams) for cracks. Pay particular attention to (2), (3) and (4)
the weld seams in the area of the igniter plugs, dummy
plug, drain valves, fuel nozzle bosses, armpit braze
patch and adjacent areas. Use a bright light and mirror
as necessary. The OCC does not have to be removed.
Perform a Leak Tec check for installed OCCs and an FPI
for removed OCCs.
72--00--00
ECOPYRIGHT 1996, 2013 Rolls--Royce Corporation
Page 610
Dec 15/13
Rolls--Royce
EXPORT CONTROLLED
TABLE 604
Item Inspection/Maintenance Action
REFERENCE SECTION
Initial
NOTE: Check Valve P/N 23074872 and subsequent part numbers are not applicable
to this inspection (these valves are considered ON CONDITION).
8
12
Visually inspect the outer combustion case (sheet metal 74--40--00, para 2.B.(1),
and weld seams) for cracks. Pay particular attention to (2), (3) and (4)
the weld seams in the area of the igniter plugs, dummy
plug, drain valves, fuel nozzle bosses, armpit braze
patch and adjacent areas. Use a bright light and mirror
as necessary. The OCC does not have to be removed.
Perform a Leak Tec check for installed OCCs and an FPI
for removed OCCs.
72--00--00
ECOPYRIGHT 1996, 2013 Rolls--Royce Corporation
Page 611
Dec 15/13
Rolls--Royce
EXPORT CONTROLLED
TABLE 605
Item Inspection/Maintenance Action
REFERENCE SECTION
Initial
CSL 5131
72--00--00
ECOPYRIGHT 1996, 2013 Rolls--Royce Corporation
Page 612
Dec 15/12
Rolls--Royce
EXPORT CONTROLLED
REFERENCE SECTION
Initial
Visually inspect the outer combustion case (sheet metal 72--40--00 Para 2.B.(1),
and weld seams) for cracks. Pay particular attention to (2), (3) and (4)
the weld seams in the area of the igniter plugs, dummy
plug, drain valves, fuel nozzle bosses, armpit braze
patch and adjacent areas. Use a bright light and mirror
as necessary. The OCC does not have to be removed.
Perform a Leak Tec check for installed OCCs and an FPI
for removed OCCs.
REFERENCE SECTION
Initial
72--00--00
ECOPYRIGHT 1996, 2013 Rolls--Royce Corporation
Page 614
Dec 15/13
Rolls--Royce
EXPORT CONTROLLED
REFERENCE SECTION
Initial
Inspect the engine fuel system for evidence of leakage. 72--40--00, Table 203
Check condition and security of fittings and tubing.
10
11
72--40--00, para 3.
13
72--00--00
ECOPYRIGHT 1996, 2013 Rolls--Royce Corporation
Page 615
Dec 15/13
Rolls--Royce
EXPORT CONTROLLED
REFERENCE SECTION
Initial
15
a.
b.
17
74--20--02, para 2.
72--00--00
ECOPYRIGHT 1996, 2013 Rolls--Royce Corporation
Page 616
Dec 15/11
Rolls--Royce
EXPORT CONTROLLED
REFERENCE SECTION
Initial
21
22
72--00--00, para
72--00--00, para
73--25--01, para 2.
7.C.
3.D.
72--00--00, para
73--25--01, para 2.
7.C.
73--25--01, para 2.
24
25
26
28
29
NOTE: Check Valve P/N 23074872 and subsequent part numbers are not applicable
to this inspection (these valves are considered ON CONDITION).
72--00--00
ECOPYRIGHT 1996, 2013 Rolls--Royce Corporation
Page 617
Dec 15/11
Rolls--Royce
EXPORT CONTROLLED
REFERENCE SECTION
Initial
Initial
31
34
35
Visually inspect the outer combustion case (sheet metal 72--40--00, para 2.B.(1),
and weld seams) for cracks. Pay particular attention to (2), (3) and (4)
the weld seams in the area of the igniter plugs, dummy
plug, drain valves, fuel nozzle bosses, armpit braze
patch and adjacent areas. Use a bright light and mirror
as necessary. The OCC does not have to be removed.
Perform a Leak Tec check for installed OCCs and an FPI
for removed OCCs.
REFERENCE SECTION
72--00--00
Page 618
Dec 15/13
Rolls--Royce
EXPORT CONTROLLED
REFERENCE SECTION
Initial
CSL 5131
72--00--00
ECOPYRIGHT 1996, 2013 Rolls--Royce Corporation
Page 619
Dec 15/13