Pumps For Heat Transfer Technology

Pumps for heat transfer technology
Centrifugal pumps
with uncooled mechanical seal or magnetic coupling
Regenerative turbine pumps with magnetic coupling
Investigation and development with recent test stands
Computer-controlled and fully automated test stands on the premises of Speck Pumpen in Roth. Measuring of hydraulics, power requirements, axial thrust, vibrations and NPSH values.
Heads of up to 400 m and flow rates of up to 750 m/h are possible.
Thermal oil test stand with pump surveillance system on the premises of Speck Pumpen in Roth.
Investigation of impacts of high temperatures up to 350 C on the lifetime of the pumps.
Your contacts at Speck Pumpen

Speck Pumpen
Systemtechnik GmbH
Regensburger Ring 6 -8
91154 Roth / Gemany
Tel: +49 9171 809 0
Fax: +49 9171 809 10
info@speck.de
www.speck.de
International representatives
page 12
Subject to technical modifications and errors.
05/2014 | 1096.1212
Pumps for heat transfer technology

Centrifugal pumps
Regenerative turbine pumps
Series TOE-G and TOE-M
Series NPY-MK and CY-MK
Consistent design modular system with volute

casings
Tried and tested and compact close-coupled

pumps with top/top casings and magnetic
coupling
Choose from six different designs with mechanical seal or magnetic coupling.
Developed for circulating organic or synthetic
heat transfer oils in heat transfer systems in accordance with DIN4754, as well as hot water.
Developed for transporting and circulating

organic or synthetic heat transfer oils and
hot water.
Suitable for pumped media with low quantities of non-abrasive impurities.
Suitable for pumped media with low amounts

of non-abrasive impurities.
Heat transfer oil
-40 C to 350 C
Heat transfer oil
up to 350 C
Hot water
up to 160 C,
up to 180 C on request
Hot water
up to 180 C,
higher temperatures
on request
Nominal pressure PN 16
Hmax. (2900 min-1)
Qmax. (2900 min-1)
Casing
100 m
Nominal pressure
min-1)
up to PN 24
550 m3/h
Hmax. (2900
Spheroidal graphite iron
Qmax. (2900 min-1)
12 m3/h (200 l/min),

24 m3/h (400 l/min)
on request
90 m
Casing
Stainless steel / spheroidal graphite iron
Main applications
Tempering in plastics and die casting industry

Baking ovens, large frying units as well as in the production of edible oil and dry masses for the food and feedstuff industries
Heating calenders and melting containers in the leather and rubber industry
Heating stirring and mixing vessels in the production of paints and varnishes
Heating tank storage facilities on stationary and FPSE platforms, as well as in tankers
Heating press lines in the wood and pulp industry
Flat glass production
Solar power plants and ORC processes
05/2014 | 1096.1212
Find the right pump for your system

Choose the best solution from six ranges
Each heat transfer system is unique in its own way - on some, the sealing principle is key, on others the vertical installation frame or perhaps
the special properties of the medium.
Series TOE-G
with mechanical sealing
With the heat transfer pumps from Speck Pumpen you can choose
from six ranges with different characteristics and find the best solution
for your system.
Different characteristics
Series TOE-M
with magnetic coupling
Water up to 160 C
Water up to 180 C on request
Oil up to 350 C
Oil up to 350 C
In comparison to pumps with

magnetic coupling:
More favourable in purchase and repair
Less energy consumption with the same
operating point
In comparison to pumps with

mechanical sealing:
Longer lifetime
No leakage and odour nuisance
ATEX
TOE-GN | TOE-MN
Bearing bracket / process design
Base plate
Dismantling of the bearing bracket possible
without moving the motor
Alignment / checking of the coupling
required before start-up
TOE-GA | TOE-MA
Bracket version
No alignment of the coupling required
before start-up
Space for disassembling the cartridge insert
required
Base plate optional
TOE-GI | TOE-MI
Bracket version
No alignment of the coupling required
before start-up
Space for disassembling the cartridge insert
required
05/2014 | 1096.1212
Minimal spare parts stock and flexibility thanks to the modular system
Thanks to the modular system with consistent design, many components are identical and interchangeable across the six ranges.
This means minimal spare parts stock.
Series TOE-G
with mechanical sealing
And it also guarantees complete flexibility, as replacing pumps and

components or retrofitting to a different design is easy.
Interchangeable
casings

Only two bearing brackets for all frame sizes
Bearing bracket 360 for 12 frame sizes
identical and interchangeable
Bearing bracket 470 for 7 frame sizes
identical and interchangeable
Series TOE-M
with magnetic coupling

Only two bearing brackets and
two brackets for all frame sizes
Bearing bracket 360 identical for
12 frame sizes
Bearing bracket 470 identical for
7 frame sizes
Interchangeability of the whole bearing
bracket is given if the magnetic coupling
is the same
Only one bracket per bearing bracket
TOE-GN | TOE-MN
Bearing bracket / process design
Base plate
Identical casing
for each frame
size (EN 733)
TOE-GA | TOE-MA
Bracket version
Base plate optional
TOE-GI | TOE-MI
Bracket version
05/2014 | 1096.1212
Identical inline-casing for each frame size

Casings with two dimensions H available
High operational safety, optimal design

and service-friendly
Robust design
Optimised for synthetic

heat transfer oils
Clever temperature
management
Torsion-resistant casing cover
Dry-run safety function for the

mechanical seal
Synthetic heat transfer oils are being used
more and more frequently due to the benefits
they offer. However, low-boilers develop in the
synthetic oils over time in form of gas bubbles,
can lead to dry-running on the mechanical
seal.
Optimised cooling of ball bearings,

mechanical seal and sleeve bearings
The air flow generated by the fan blade on the
coupling cools the mechanical seal and the
ball bearing optimally in combination with
coupling protection or bracket and several
cooling fins. The additional cooling zone reduces the temperature on the sleeve bearings.
This is ruled out completely in the generously

designed mechanical seal casings from Speck
Pumpen. An anti-vortex rib reliably prevents
gas bubbles from forming on the mechanical
seal.
Optimised cooling of the ball bearings and

magnetic coupling
A fan blade is also used for cooling in the
TOE-MN series. Here, the generated air flow,
in combination with coupling protection,
ventilation slots and cooling zone, reduces the
temperature on the magnetic coupling and
ball bearings extremely effectively.
Ball bearings with lifetime lubrication

Wear-resistant SiC sleeve bearings
Solid, hydrodynamically lubricated sleeve
bearings made from SiC as tried-and-tested
slide material - extremely wear-resistant and
good resistance in corrosive media.
Impellers with back vanes
The back vanes of the impellers significantly
reduce the axial thrust and therefore remove
strain from the mechanical seal and the ball
bearings considerably. They also keep dirt
particles away from the sleeve bearings.
Magnetic couplings
Supplied with radial start-up safety device as
standard at Speck Pumpen.
The vacuum generated by the back vanes also

ensures that the low-boilers do not collect in
the mechanical seal casing and are returned
to the media circuit.
On close-coupled pumps, the air flow from

the motor fan also cools the bearing shield
and therefore also the ball bearings inside it.
Pumps with mechanical seal

Dry-run safety function
Back vanes
Anti-vortex rib
Temperature management
Cooling zone
Cooling fins
Fan blades
Robust
Double-row angular ball bearings
from bearing bracket 470
Robust
Solid sleeve bearing made from SiC
Fig.: TOE-GN, bearing bracket 470, casing with centreline mounting
05/2014 | 1096.1212
Also suitable for critical

applications
Optimal design
Maintenance-friendly
and flexible
Mechanical seal with quench

For media, which are prone to crack pro
duct formation on the sealing surfaces of the
mechanical seal, versions with quench are
available.
Energy efficiency
High energy efficiency secures a lasting competitive edge.
Speck Pumpen offers the important criteria
for energy-optimised design: Seamless range
of sizes, highly efficient impellers, switching of
impellers for the best design at the operating
point and, naturally, motors in accordance
with IE2.
Simple installation
All six series are extremely maintenancefriendly thanks to easy-to-remove bearing
brackets.
Optimal sizes of the magnetic couplings

Magnetic couplings in staged sizes guarantee
optimal design at the operating point with
minimal viscosity and eddy current losses.
Minimum spare parts stock

The high level of interchangeability of identical parts guarantees minimal spare parts stock
requirements and an extremely high level of
flexibility.
Pumps with magnetic couplings

100% free of leakage and with lower maintenance requirements than pumps with
mechanical seal.
ATEX
All magnetically-coupled pumps are ATEXcertified.
For pumps with magnetic coupling, you can

also replace the sleeve bearing cartridge
easily as a complete spare part. It is quick and
ensures correct installation every time.
The bearing bracket 360 alone is used with

mechanical seal in all three series in up to
twelve sizes.
Retrofitting to a different series is also no
problem at all - the volute casing can even be
left in the system.
Pumps with magnetic coupling

Robust and maintenance-friendly
Solid sleeve bearing cartridge with SiC can be replaced as a complete spare part
Temperature management
Several ventilation slots
Cooling zone
Fan blades (TOE-MN only)
Optimal design
Magnetic couplings in staged sizes for optimal design with minimal viscosity and eddy
current losses
Fig.: TOE-MN, bearing bracket 470, casing with centreline mounting
05/2014 | 1096.1212
Longer lifetime
There are effects, which have little or no relevant impact on smaller
designs, but lead to increased wear in larger pumps.
Speck Pumpen offers larger pumps with special designs to guarantee a

longer lifetime: Casing with centreline mounting and double volute.
Centreline mounting relieves strain from the

bearings and coupling
A double volute remove

strain from the sleeve
bearings
Radial forces are applied directly on the sleeve
bearings. The forces increase with higher
impeller diameters and higher speeds. This is
why the sleeve bearings on larger pumps with
single volute casings wear faster.
l
Speck Pumpen therefore uses casings with
double volute for larger pumps, which significantly reduce the radial forces. The strain on
the radial and axial bearings is considerably
reduced, helping them achieve a much longer
lifetime.
Casing with feet: The larger the pump, the more strain
placed on the bearings and coupling by heat expansion
The centreline mounting eliminates the impact of the

heat expansion completely.
Casings with feet can only expand upwards in

high temperatures, which causes the shaft to
tilt and bend. This has an impact on the sleeve
bearings and shaft coupling in particular.
As the heat expansion increases with larger
casing size, the sleeve bearings and couplings
also wear faster on larger pumps.
Speck Pumpen is the only manufacturer to use

a centreline mounting for heat transfer pump
volute casings.
It eliminates the impact of vertical expansion
completely. The shaft is also always aligned at
the optimal height, even in hot operation, and
bearings and coupling achieve a significantly
higher lifetime.
Double volute
Centreline mounting
TOE-GN / GA, TOE-MN / MA Sizes and casing designs

32-160
40-160
50-160
65-160
80-160
32-200
40-200
50-200
65-200
80-200
100-200
125-200
32-250
40-250
50-250
80-250
100-250
65-250
Bearing bracket 360

All casings with dimensions in accordance with EN 733
100-160
Bearing bracket 470

Casing with double volute
Casing with centreline mounting

05/2014 | 1096.1212
l
l
Characteristic diagrams and casing designs

TOE-GN / GA, TOE-MN / MA
Q [U.S.GPM]
0
[m]
100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400
100
2900 1/min
320
[feet]
90
280
80
32-25
240
65-
70
250
80-
250
50
50-2
40-250
60
200
100
-25
32200
50
80
50-
-20
65
200
200
160
120
-20
80-
160
100
125-
-20
200
80
-16
65
160
40-
160
32-
30
160
50-
40-
40
20
100
-16
10
0
40
80
120
160
200
240
280
40
320
360
400
440
480
TOE-GI, TOE-MI
0
520
560
[m3/h]
Q [U.S.GPM]
50
100
150
200
250
300
350
400
60
2900 1/min
[m]
50
180
[feet]
160
140
40-
200
40
65/ 65-2
80- 00
200
50-
120
200
30
-16
0-B
100
0-A
-16
40
40
80
20
60
40
10
20
0
10
20
30
40
50
60
70
80
90
Q
Bearing bracket 360
05/2014 | 1096.1212
Bearing bracket 470
Casing with double volute
[m3/h]
Casing with centreline mounting
10
Regenerative turbine pumps with magnetic coupling

Extremely compact, robust, durable
and safe
Type-related properties
Due to their design, regenerative turbine
pumps have different properties than centrifugal pumps and are the better choice for
certain applications.
The peripheral impeller

transfers the hydraulic output through momentum
exchange.
NPY-2251-MK-HT,
NPY-2251-MK-TOE
They achieve relatively high pressures with

smaller volume flows, which means that
the characteristic curve also runs relatively
steep. They belong to the pump types which
offer the option of changing the conveying
direction through right-left run. They can
also pump media containing gas with no
problems.
Compact, robust, durable and safe

Regenerative turbine pumps with magnetic coupling from Speck
Pumpen have been used in a wide range of systems and assemblies
successfully for many years. The compact design requires minimal
installation space and reduces the weight. The perfected pumps also
impress with the small number of extremely high-quality parts.
Robust sleeve bearings made from SiC and ceramic shafts (Al2O3) guarantee a long lifetime and are free from leakage and maintenance-free
thanks to magnetic couplings.
Special designs available on request
On request, Speck Pumpen can also develop special designs for special
media or with different hydraulics. Please contact us.
Durable
Sleeve bearing made
from SiC and ceramic
shafts
Media
Connections
NPY-2251-MK-HT
Water max. 180 C

SAE 1/2
Higher temperatures on
request
NPY-2251-MK-TOE
Oil max. 350 C
Casing
Stainless steel
Bracket
With or without feet
Drive 50 Hz
0.50 kW, 3~
1.00 kW, 3~ on request
Drive 60 Hz
0.55 kW, 3~
1.00 kW, 3~ on request
G 1/2, SAE 1/2
Q [U.S.GPM]
60
2800 / 3400 1/min
[m]
180
50
[feet]
160
140
40
120
100
30
80
20
60
40
10
20
0
0
0
0,2
10
0,4
0,6
15
0,8
20
1,0
1,2
25
1,4
30
Q [l/min]
1,6
1,8
Q [m /h]
3
Flexible
Bracket with feet
Safe and
maintenance-free
Magnetic coupling
Fig.: CY-6091-MK-TOE
Compact
Close-coupled
design and small
number of parts
05/2014 | 1096.1212
11
CY-4281-MK-HT,
CY-4281-MK-TOE
CY-6091-MK-HT,
CY-6091-MK-TOE
Media
CY-4281-MK-HT
Connections
Hydraulics
Connections
Water max. 180 C

Higher temperatures on request
Q 80, Q 150
G 3/4, SAE 1
Q 200
SAE 1 1/4
CY-6091-MK-TOE Oil max. 180 C
Q 80, Q 150
G 3/4
Oil max. 350 C
Q 80, Q 150
SAE 1
Q 200
SAE 1 1/4
CY-6091-MK-HT
Water max. 180 C

SAE 3/4
Higher temperatures on
request
CY-4281-MK-TOE Oil max. 350 C
Media
SAE 3/4
Casing
Stainless steel
Bracket
Drive 50 Hz
1.00 2.20 kW, 3~
Casing
Spheroidal graphite iron
Drive 60 Hz
1.00 2.20 kW, 3~
Bracket
Drive 50 Hz
2.80 5.50 kW, 3~
Drive 60 Hz
2.80 5.50 kW, 3~
[m]
2.5
5.0
7.5
10.0
12.5
15.0
Q [U.S.GPM]
17.5
20.0
22.5
90
2800 / 3400 1/min
80
275
250
Q 90
[feet]
[m]
60
200
70
175
60
150
50
40
125
30
100
75
20
50
10
Q 30
0
0
10
0,5
20
1,0
30
1,5
40
2,0
2,5
50
3,0
60
3,5
70
4,0
80
90
Q [l/min]
4,5
5,0
Q [m /h]
3
05/2014 | 1096.1212
30
Q [U.S.GPM]
40
50
2800 / 3400 1/min
80
225
Q 60
20
90
70
50
10
100
300
250
Q 80
Q 150
200
Q 200
150
40
100
30
20
25
10
50
0
0
20
40
60
80
100
120
140
160
10
180
200
Q [l/min]
11
12
Q [m /h]
3
[feet]
Speck Pumpen Represented worldwide

Deutschland Ost
Huckauf Ingenieure GmbH
Auerswalder Hauptstrae 2
09244 Lichtenau
Tel.: +(49) 37208 660 80
Fax: +(49) 37208 660 77
info@huckauf.de
www.huckauf.de
Berlin
Fontanepromenade 17
10967 Berlin
Tel.: +(49) 30 890 959 92
Fax: +(49) 30 890 959 91
info@huckauf.de
www.huckauf.de
Norddeutschland
Ingenieure Willy Wandrach GmbH
Flurstrae 105
22549 Hamburg
Tel.: +(49) 40 398 624 0
Fax: +(49) 40 398 624 28
info@speck-nord.de
www.speck-nord.de
Hannover, Kassel
IVT Pumpen GmbH
Zum Wischfeld 1A
31749 Auetal
Tel.: +(49) 5752 929 597
Fax: +(49) 5752 929 599
Mobile: +(49) 172 511 699 9
info@ivt-pumpen.de
www.ivt-pumpen.de
Kln
Grillenpfad 28
40764 Langenfeld
Tel.: +(49) 2173 914 560
Fax: +(49) 2173 914 588
info@huckauf.de
www.huckauf.de
Bayern, Baden-Wrttemberg
Speck Pumpen
VERKAUFSGESELLSCHAFT GmbH
Hauptstrae 1 3
91233 Neunkirchen a. Sand
Tel.: +(49) 9123 949 0
Fax: +(49) 9123 949 260
info@speck-pumps.com
www.speck-pumps.com
Service
Deutschland Mitte
FSE Fluid Systems Erfurt
Poeler Weg 6
99085 Erfurt
Tel.: +(49) 361 550 715 0
Fax: +(49) 361 550 715 19
info@fluidsystems.org
www.fluidsystems.org
Kln
Arpuma GmbH
Sonnenhang 33
50127 Bergheim
Tel.: +(49) 2271 837 70
Fax: +(49) 2271 837 720
info@arpuma.de
www.arpuma.de
B Belgium
Heat transfer pumps / Pompes pour
fluid thermique
FLOWMOTION BVBA
Mergelweg 3
1730 Asse
Tel.: +(32) 2 309 67 13
Fax. +(32) 2 309 69 13
info@flowmotion.be
www.flowmotion.be
SPECK - Pompen Belgie N.V.
Bierweg 24
9880 Aalter
Tel.: +(32) 937 530 39
Fax: +(32) 932 500 17
info@speckpompen.be
www.speckpompen.be
BG Bulgaria
EVROTECH OOD
54 A, Manastirska Str.
1111 Sofia
Tel.: +(359) 2 971 32 73
Fax: +(359) 2 971 22 88
office@evrotech.com
www.evrotech.com
CH Switzerland
Speck Pumpen Subsidiary
Speck Pumpen Industrie GmbH
Brglenweg 4
8854 Galgenen
Tel.: +41 554 425 094
Fax: +41 554 425 094
info@speckswitzerland.com
www.speckswitzerland.com
Sales and Service
HnyTec AG
Gschwbring 19
6244 Nebikon
Tel.: +41 (62) 544 33 00
Fax: +41 (62) 544 33 10
contact@haenytec.ch
www.haenytec.ch
Service
MEYER ARMATUREN PUMPEN GMBH
Rigackerstrasse 19
5610 Wohlen
Tel. + 41 56 622 77 33
Fax + 41 56 622 77 60
info@meyer-armaturen.ch
www.meyer-armaturen.ch
CN
China
Jiashan SPECK PUMPS
Systemtechnik Ltd.
No. 57, Hong Qiao Rd.,
No. 4 Economical Developing Zone,
314100 Jiashan Xian,
Zhejiang Province
Tel.: +(86) 573 847 312 98
Fax: +(86) 573 847 312 88
steveche@speck-pumps.cn
www.speck-pumps.cn
CZ
International
Czech Republic
Sigmet spol s.r.o.
Kosmonautu c.p. 1085/6
77200 Olomouc
Tel.: +(420) 585 231 070
Fax: +(420) 585 227 072
sigmet@sigmet.cz
www.sigmet.cz
A Austria
Tuma Pumpensysteme GmbH
Eitnergasse 12
1230 Wien
Tel.: +(43) 191 493 40
Fax.: +(43) 191 414 46
contact@tumapumpen.at
www.tumapumpen.at
DK Denmark
Pumpegruppen a/s
Lundtoftegrdsvej 95
2800 Lyngby
Tel.: +(45) 459 371 00
Fax: +(45) 459 347 55
info@pumpegruppen.dk
www.pumpegruppen.dk
AUS Australia
Pump Solutions Australasia
Unit 1
7 Bessemer Way
Wangara, WA 6065
P.O. Box 1811
Wangara DC, WA 6947
Tel.: +(61) 8 9408 1544
Fax: +(61) 8 9408 1644
mike@pumpsolutions.com.au
www.pumpsolutions.com.au
E Spain
SPECK BOMBAS INDUSTRIALES, S.L.U.
Trafalgar, 53 despacho 6
Centro de Negocios CNAF
46023 Valencia
Tel.: +(34) 963 811 094
Fax: +(34) 963 811 096
Mobile: +(34) 618 376 241
speck-spain@terra.com
www.speck.de
F
France
Speck Pompes Industries S.A.
Z.I. Parc dActivits du Ried
4, rue de lEnergie
B.P. 227
67727 Hoerdt Cedex
Tel.: +(33) 3 88 68 26 60
Fax: +(33) 3 88 68 16 86
info@speckpi.fr
03_14
Pump Systems Australia

Factory 2
21 London Drive
Bayswater /Melbourne
Victoria 3153
Tel.: +(61) 397 623 100
Fax: +(61) 397 623 188
sales@pumpsystemsaustralia.com.au
Produktion / Verwaltung
D Production
Speck
Pumpen
/ Administration
Systemtechnik GmbH
Speck Pumpen
Regensburger
Regensburger
Ring 6 Ring
8, 911546-8
Roth
91154 Roth / Germany
GB Great Britain
Speck Pumpen ABC Ltd
AreenA House
Moston Road,
Elworth, Sandbach
Cheshire CW11 3HL
Tel.: +(44) 844 764 063 2
Fax: +(44) 844 764 063 4
admin@speck-abc.com
www.speck-abc.com
GR
Greece
SPECK Hellas
Salaminos St. 54
17676 Kallithea
Tel.: +(30) 210 956 500 6
Fax: +(30) 210 957 747 3
speck.chatzigeorgopoulos@on.gr
www.chatzigeorgopoulos.com
Italy
Centrifugal pumps / Pompe centrifughe
Klaus Union Pompe e Valvole S.r.l.
Via Piave, 17
20027 Rescaldina (MI)
Tel. : +(39) 033 157 982 3
Fax: +(39) 033 157 982 5
info@klausunion.it
www.klausunion.it
Vacuum pumps / Pompe per vuoto
Rio Nanta S.r.l.
Via Mauro Macchi, 42
20124 Milano
Tel. +(39) 028 940 642 1
Fax: +(39) 028 323 913
Mobile: +(39) 339 658 781 6
rionanta@rionanta.it
www.rionanta.it
IL Israel
Ambi-Tech
Electronics Engineering Ltd.,
20 Taas st.;
Industrial Area, Kfar-Saba
P.O. Box 50
Kfar-Saba 44425
Tel.: +(972) 976 775 00
Fax: +(972) 976 774 00
Arie.Weiss@PWeiss.d2g.com
www.pweiss.co.il
Small pumps /
heat transfer pumps :
Ringel Brothers (1973) Ltd.
134 Hertzel St.
P.O. Box 5148
Tel-Aviv 66555
Tel.: +(972) 368 255 05
Fax: +(972) 368 220 41
Mobile: +(972) 544 623 095
mringel@ringel-bros.co.il
www.ringel-bros.co.il
IND India
Flux Pumps India Pvt. Ltd.
427/A-2, Gultekdi Industrial Estate
Near Prabhat Printing Press
Pune 411 047, Maharashtra
Tel.: +(91) 020 2427 1023
Fax: +(91) 020 2427 0689
Mobile: +(91) 98504 03114
kiran.kadam@flux-pumps.in
www.flux-pumps.in
J Japan
Rodateq, Inc.
Suite 301 Oka Bldg.
2 - 1 - 16 Kyomachibori, Nishiku
550 0003 Osaka
Tel.: +(81) 664 441 940
Fax: +(81) 664 449 050
info@rodateq.co.jp
www.rodateq.co.jp
Rodateq, Inc.
Tokyo Branch
No. 408, 3 - 22 - 12
Highashi Ikebukuro, Toshima - ku
170-0013 Tokyo
Tel.: +(81) 359 798 818
Fax: +(81) 359 798 817
roda-t@yo.rim.or.jp
www.rodateq.co.jp
L Luxembourg
fluid thermique
FLOWMOTION BVBA
Mergelweg 3
1730 Asse
Tel.: +(32) 2 309 67 13
Fax. +(32) 2 309 69 13
info@flowmotion.be
www.flowmotion.be
MAL Malaysia
Leesonmech
Engineering ( M ) Sdn. Bhd.
No. 18 Jalan 18, Taman Sri Kluang,
86000 Kluang, Johor
Tel.: +(607) 777 105 5
Fax: +(607) 777 106 6
sales@leesonmech.com
www.leesonmech.com
Tel.: +(49) 9171 809 0
Tel:+(49)
+49
Fax:
91719171
809 10 809
0
Fax: +49 9171 809 10
N Norway
Ing. Per Gjerdrum A/S
P.O. Box 154
Nye Vakasvei 28
1360 Nesbru
Tel.: +(47) 667 756 00
Fax: +(47) 667 756 01
Pg-pumps@pergjerdrum.no
www.pg-marinegroup.com
NL Netherlands
Centrifugal pumps /
Centrifugaalpompen
SPECK - Pompen Nederland B.V.
Majoraan 5
6942 SB DIDAM
Tel.: +(31) 316 331 757
Fax: +(31) 316 528 618
info@speck.nl
www.speck.nl
Vacuum pumps / Vacumpompen
DOVAC B.V.
Meer en Duin 228
2163 HD Lisse
Tel.: +(31) 252 423 363
Fax: +(31) 252 417 946
info@dovac.nl
www.dovac.nl
fluid thermique
FLOWMOTION BVBA
Mergelweg 3
1730 Asse
Tel.: +(32) 2 309 67 13
Fax. +(32) 2 309 69 13
info@flowmotion.be
www.flowmotion.be
NZ New Zealand
MacEwans Pumping Systems Ltd.
19 Ride Way
North Harbour Industrial Estate
Tel.: +(64) 941 548 60
Fax: +(64) 941 548 68
pumps-ak@macewans.co.nz
www.macewans.co.nz
P Portugal
Ultra Controlo
Projectos Industriais, Lda.
Quinta Lavi Armazm 8
Abrunheira
27 10 - 089 Sintra
Tel.: +(351) 219 154 350
Fax: +(351) 219 259 002
info@ultra-controlo.com
www.ultra-controlo.com
PL Poland
E.A. Krupinski Elzbieta Krupinska
ul. Przymiarki 4A
31-764 Krakow
Tel. / Fax: +(48) 126 455 684
biuro@krupinski.krakow.pl
www.krupinski.krakow.pl
RC Taiwan
Speck Pumps Technology Taiwan Ltd.
2Fl., no. 153, Sec. 2
Datong Rd., Xizhi District
New Taipei City
Tel.: +(886) 286 926 220
Fax: +(886) 286 926 759
Mobile: +(886) 936 120 952
speck886@ms32.hinet.net
www.speck-pumps.com.tw
RCH Chile
W & F Ingenieria Y Maquinas S.A.
Felix de Amesti 90, Piso 6
Las Condes, Santiago
Tel.: +(56) 220 629 43
Fax: +(56) 220 630 39
rwendler@tie.cl
RI Indonesia
PT Roda Rollen Indonesia
Kompleks Pertokoan Glodok
Jaya No. 30
Jl. Hayam Wuruk,
Jakarta - Pusat
Indonesia, 11180
Tel.: +(6221) 659 922 528
Fax: +(6221) 380 595 9
rudy@rodarollenindonesia.com
ROK Corea
J.C. International Inc.
2F, Bikeum Bldg. 108,
Yanghwa-Ro, Mapo-Gu,
121-893 Seoul
Tel.: +(82) 232 628 00
Fax: +(82) 232 569 09
jclee@jcint.co.kr
www.jcint.co.kr
info@speck.de
info@speck.de
www.speck.de
www.speck.de
RO Romania
S.C. Gimsid S.R.L.
Str. Arcului nr. 9, Arp.2
021031 Bucuresti
Tel.: +(40) 21 2118701
Fax: +(40) 21 2102675
gimsid@gimsid.ro
www.gimsid.ro
RUS Russia
Klaus Union
Evgeny Gorchilin
Trofimova street, 18a
Trofimova street, 15 post box 60
Moscow 115432
Tel. / Fax: +(7) 495 679 409 0
gorchilin@klaus-union.ru
www.klaus-union.ru
S Sweden
Hugo Tillquist AB
P.O.Box 1120
16422 Kista
Tel.: +(46) 859 463 200
Fax: +(46) 875 136 95
info@tillquist.com
www.tillquist.com
SK Slovakian Republic
Czech Republic (CZ)
SLO Slovenia
SLOTEH Branko Gabric s.p.
Zagrebka cesta 20
2000 Maribor
Tel.: +(38) 624 614 460
Fax: +(38) 624 614 465
branko.gabric@amis.net
www.sloteh.si
SGP Singapore
Malaysia (MAL)
T Thailand
Pump Systems Flux & Speck Co. Ltd.
181/4 Soi Anamai
Srinakarin Road
Suanluang Bangkok 10250
Tel.: +(662) 320 256 7
Fax: +(662) 322 248 6
thienchai@fluxspeck.com
www.fluxspeck.com
TR Turkey
SPECK - Pompa
Sanayi ve Ticaret Ltd. Sti.
P.K. 41 Suadiye
81072 Istanbul
Tel.: +(90) 216 387 894 0
Fax: +(90) 216 387 982 9
speck@speckpompa.com.tr
www.speckpompa.com.tr
USA USA
SPECK Pumps
Pool Products
8125 Bayberry Road
Jacksonville, Florida 32256
Tel.: +(1) 904 739 262 6
Fax: +(1) 904 737 526 1
info.usa@speck-pumps.com
www.usa.speck-pumps.com
Heat transfer pumps with radial
impeller:
Shanley Pump & Equipment, Inc.
2525 South Clearbrook Drive
Arlington Heights, ll. 60005-4623
Tel.: +1 (847) 439 - 9200
Fax: +1 (847) 439 - 9388
contact@shanleypump.com
www.shanleypump.com
ZA Rep. South Africa

AQUAPUMP ( Pty ) Ltd.
Unit 54
APD Industrial park
Kelvin street
Kya Sand
Tel.: +27 117 080 600
Fax: +27 865 864 151
Mobile: +27 824 509 078
cliff@aquapump.co.za
www.aquapump.co.za
1096.1212 -05/2014
D Germany

Pumps For Heat Transfer Technology

Uploaded by

Copyright:

Available Formats

Pumps For Heat Transfer Technology

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pumps For Heat Transfer Technology

Uploaded by

Copyright:

Available Formats

Pumps for heat transfer technology

Investigation and development with recent test stands

Your contacts at Speck Pumpen

Subject to technical modifications and errors.