PPE'S Test
PPE'S Test
PPE'S Test
Which of the following should you NOT do when using safety footwear?
1)
2)
3)
4)
2.
2)
True
False
4.
3.
Select and use the right kind of footwear for the job you are
going to be performing.
Impacts
Electrical shocks
Splashes, spills, and drips
Airborne contaminants
You should wear hearing protection devices whenever you are exposed to
noise that is 85 decibels or greater for an 8-hour period of time.
1)
2)
True
False
5.
6.
2)
3)
Ingestion
Skin absorption
Inhalation
8.
The most common route of exposure for most health hazards is:
1)
7.
True
False
Impact injuries
Compound injuries
Injuries from splashes and spills
4)
9.
10.
2)
Contact injuries
Indirect injuries
True
False
12.
Traumatic injuries
To clean your eye protection equipment when it becomes oily and dirty, you
can use an abrasive soap.
1)
11.
True
False
13.
14.
2)
Molten metals
Light from a reading lamp
True
False
Once you have fit tested your respirator, you need NOT monitor it while
you work.
1)
2)
16.
There are a lot of valid reasons (excuses) for not wearing a hard hat.
1)
15.
True
False
Class C hard hats will protect you from electrical shocks up to 20,000 volts.
1)
2)
True
False
17.
18.
2)
Residual Air
True
False
You should always fit test your respirator before using it.
1)
2)
20.
Supplied Air
If you work in a wet, slippery area, you should wear PVC or rubber
footwear.
1)
19.
Air Purifying
True
False
21.
22.
2)
Hold both eyes open with your fingers and look into the stream
of water.
Drink plenty of water.
True
False
24.
23.
Dusts
Mists & Sprays
Vapors
Silt
True
False
25.
26.
2)
3)
4)
Select and use the right kind of glove for the job you are going
to be performing.
Select gloves that fit.
Remove any rings, watches, or bracelets that might cut or tear
your gloves.
Store gloves inside out.
You should always use metal mesh gloves when working around electrical
sources.
1)
2)
28.
27.
True
False
You should always clean and inspect your respirator after you use it.
1)
2)
29.
True
False