ATI Other Products 2009 PDF
ATI Other Products 2009 PDF
ATI Other Products 2009 PDF
62
WARNING
Airframe tooling can cause flying chips.
Wear safety goggles (user and bystanders).
63
Hole Duplication
AT507-5 Duplicating Punch - 5/32".
3 1/2" overall length. Manufactured from heat treated oil
hardened drill rod (OHDR).
Microstops/Countersinks/
Counterbores/Back Countersinks & Spotfacers
AT2200CSK Elliptical Countersink Kit.
Kit provides countersinking capabilities for the installation
of the NAS1734 or 1735 elliptical head blind nuts, for
fasteners -3 (#10) thru -8 (1/2"). Hole preparation in
accordance with NAS1736. The cutters and rockers are
driven by common hand-held drill motors.
Kit includes the following Microstops, stabilizing rockers
and cobalt cutters:
ATSK2260 - Microstop with Wobble Skirt and Arm
Assembly. Accommodates fastener sizes #10, 1/4" and
5/16".
ATSK2266 - Jumbo Microstop with Wobble Skirt and Arm
Assembly. Accommodates fastener sizes 3/8", 7/16" and
1/2". (Note: 7/16" and 1/2" countersink assemblies are
not included).
C15374-3 - Elliptical Countersink Assembly, #10.
C15374-4 - Elliptical Countersink Assembly, 1/4".
C15734-5 - Elliptical Countersink Assembly, 5/16".
C15374-6 - Elliptical Countersink Assembly, 3/8".
AT402A-4 Back Countersink - 1/4" OD.
1/4" Body Diameter, 1/8" Pilot Hole, 4 Flute, 100
Cutting Angle for use in restricted areas when direct
countersinking is not possible. Use AT404-2 Pilot.
AT402D-4 Back Countersink - 5/16" OD.
5/16" Body Diameter, 5/32" Pilot Hole, 4 Flute, 100
Cutting Angle for use in restricted areas when direct
countersinking is not possible. Use AT404-3 Pilot.
AT402E-4 Back Countersink - 3/8" OD.
3/8" Body Diameter, 3/16" Pilot Hole, 4 Flute, 100
Cutting Angle for use in restricted areas when direct
countersinking is not possible. Use AT404-4 Pilot.
AT402G-4 Back Countersink - 7/16" OD.
7/16" Body Diameter, 3/16" Pilot Hole, 4 Flute, 100
Cutting Angle for use in restricted areas when direct
countersinking is not possible. Use AT404-4 Pilot.
AT402H-4 Back Countersink - 7/16" OD.
7/16" Body Diameter, 5/32" Pilot Hole, 4 Flute, 100
Cutting Angle for use in restricted areas when direct
countersinking is not possible. Use AT404-3 Pilot.
64
WARNING
Airframe tooling can cause flying chips.
Wear safety goggles (user and bystanders).
65
AT441HSBA - Microstop.
Ball bearings, with AT440A-1X skirt and phenolic nose
piece.
66
Dimpling Aluminum
AT206A-8-R Male Dimple Die - 1".
.187 Shank Diameter, 1" Body Diameter, 3/8" Body
Length. Used for installing 1/4" AN426 Rivets.
AT207A-8-R Female Dimple Die - .87.
.187 Shank Diameter, .87 Body Diameter, 3/8" Body
Length. Used for installing 1/4" AN426 Rivets.
AT227AH Air Line Hose 20 feet long.
Used on ATI Portable and Stationary Dimpling Machines.
AT245DA-4 Male Dimple Die - 3/32".
For hot dimpling AN426 Rivet.
AT246TM Temperature Test Meter.
Utilizes touch probe for verifying material temperature
when hot dimpling.
AT247BC Service Cord.
Used to supply the 110-Volt power from the service outlet
to the Dimpling Control Unit. Male plug not furnished
because of the many types of service outlets used in
various plants.
AT251DA-3 Female Dimple Die - 3/32".
3/8" Body Diameter, 1/8" Shank Length 3/32" Rivet, #40
Pilot Drill Size for AN426 Rivets. Use with AT259 Portable
Dimpling Squeezer.
AT251DA-4 Female Dimple Die - 1/8".
3/8" Body Diameter, 1/8" Shank Length 1/8" Rivet, #30
Pilot Drill Size for AN426 Rivets. Use with AT259 Portable
Dimpling Squeezer.
WARNING
Airframe tooling can cause flying chips.
Wear safety goggles (user and bystanders).
67
68
WARNING
Airframe tooling can cause flying chips.
Wear safety goggles (user and bystanders).
69
70
WARNING
Airframe tooling can cause flying chips.
Wear safety goggles (user and bystanders).
71
WARNING
Disclaimer:
can cause
chips.and graphics published
Snap-on Specialty Tools has made every effort to ensure the accuracy of the information published in this catalog and onAirframe
our webtooling
site. However,
theflying
documents
Wear safety goggles (user and bystanders).
may contain technical inaccuracies or typographical errors. We make no representations about the suitability of the information and graphics presented. All such documents and graphics
are provided "as is" without warranty of any kind.
77