User's Manual: Digital Camera
User's Manual: Digital Camera
User's Manual: Digital Camera
Users Manual
En
Trademark Information
Microsoft, Windows and Windows Vista are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc.
Adobe and Acrobat are registered trademarks of Adobe Systems Inc.
The SD logo is a trademark of the SD Card Association.
PictBridge is a trademark.
All other trade names mentioned in this manual or the other documentation
provided with your Nikon product are trademarks or registered trademarks of their
respective holders.
Introduction
First Steps
G
More on Playback
Movies
Technical Notes
WARNINGS
Turn off in the event of
malfunction
Should you notice smoke or an
unusual smell coming from the
camera or AC adapter, unplug the AC
adapter and remove the batteries
immediately, taking care to avoid
burns. Continued operation could
result in injury. After removing or
disconnecting the power source, take
the equipment to a Nikon-authorized
service representative for inspection.
Do not disassemble
Touching the internal parts of the
camera or AC adapter could result in
injury. Repairs should be performed
only by qualified technicians. Should
the camera or AC adapter break open
as the result of a fall or other accident,
take the product to a Nikon-authorized
service representative for inspection,
after unplugging the product and/or
removing the batteries.
ii
iii
iv
Notices
Notice for Customers in the U.S.A.
Federal Communications
Commission (FCC) Radio
Frequency Interference Statement
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC rules. These limits are
designed to provide reasonable
protection against harmful
interference in a residential installation.
This equipment generates, uses, and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
Reorient or relocate the receiving
antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an
experienced radio/television
technician for help.
CAUTIONS
Modifications
The FCC requires the user to be
notified that any changes or
modifications made to this device that
are not expressly approved by Nikon
Corporation may void the users
authority to operate the equipment.
Interface Cables
Use the interface cables sold or
provided by Nikon for your equipment.
Using other interface cables may
exceed the limits of Class B Part 15 of
the FCC rules.
Notice for customers in the State of
California
WARNING
Handling the cord on this product will
expose you to lead, a chemical known
to the State of California to cause birth
defects or other reproductive harm.
Wash hands after handling.
Nikon Inc.,
1300 Walt Whitman Road
Melville, New York 11747-3064
USA
Tel: 631-547-4200
Notices
vi
Table of Contents
For Your Safety ......................................................................................................................................ii
WARNINGS............................................................................................................................................................................. ii
Notices......................................................................................................................................................v
Introduction ...........................................................................................................................................1
About This Manual ................................................................................................................................ 1
Information and Precautions............................................................................................................. 2
Parts of the Camera............................................................................................................................... 4
The Camera Body ...................................................................................................................................................4
The Monitor................................................................................................................................................................6
Basic Operations..................................................................................................................................... 8
The Shooting Mode Button .............................................................................................................................8
c (playback) button...........................................................................................................................................8
The Multi Selector...................................................................................................................................................9
d button .............................................................................................................................................................10
Switching Between Tabs.................................................................................................................................10
Help Displays..........................................................................................................................................................11
About the Shutter-release Button.............................................................................................................11
Attaching the Camera Strap .........................................................................................................................11
vii
Table of Contents
A Auto Mode..................................................................................................................................... 27
Shooting in the Auto Mode..............................................................................................................27
Using the Flash......................................................................................................................................28
Setting the Flash Mode....................................................................................................................................28
Taking Pictures with the Self-timer ...............................................................................................30
Macro Mode...........................................................................................................................................31
Exposure Compensation ...................................................................................................................32
c More on Playback....................................................................................................................... 46
Viewing Multiple Pictures: Thumbnail Playback ......................................................................46
Calendar Display...................................................................................................................................................47
Taking a Closer Look: Playback Zoom ..........................................................................................48
Editing Pictures.....................................................................................................................................49
Enhancing Brightness and Contrast: D-Lighting..............................................................................50
Creating a Cropped Copy: Crop .................................................................................................................51
g Resizing Pictures: Small Picture ...........................................................................................................52
D Movies ............................................................................................................................................. 53
Recording Movies ................................................................................................................................53
The Movie Menu...................................................................................................................................54
Selecting Movie Options.................................................................................................................................54
Movie Playback .....................................................................................................................................55
Deleting Movie Files...........................................................................................................................................55
viii
Table of Contents
Connecting to Televisions, Computers and Printers ............................................................ 56
Connecting to a TV ..............................................................................................................................56
Connecting to a Computer...............................................................................................................57
Before Connecting the Camera..................................................................................................................57
Transferring Pictures from a Camera to a Computer ....................................................................58
Connecting to a Printer......................................................................................................................61
Connecting the Camera and Printer........................................................................................................62
Printing Pictures One at a Time ..................................................................................................................63
Printing Multiple Pictures ...............................................................................................................................64
Creating a DPOF Print Order: Print Set.........................................................................................67
ix
Table of Contents
Basic Camera Setup: The Setup Menu..........................................................................................82
Displaying the Setup Menu...........................................................................................................................83
a Menus .................................................................................................................................................................84
c Welcome Screen...........................................................................................................................................85
d Date.......................................................................................................................................................................86
e Monitor Settings ..........................................................................................................................................89
f Date Imprint.....................................................................................................................................................91
U Motion detection..........................................................................................................................................92
h AF Assist ...........................................................................................................................................................92
i Sound Settings ..............................................................................................................................................93
k Auto Off ..............................................................................................................................................................94
l Format Memory/m Format Card.......................................................................................................95
n Language ...........................................................................................................................................................96
o Video Mode .....................................................................................................................................................96
d Blink Warning..................................................................................................................................................97
p Reset All ..............................................................................................................................................................98
s Battery Type .................................................................................................................................................. 100
d Protect ...........................................................................................................................................................100
f Rotate Image................................................................................................................................................101
h Copy .................................................................................................................................................................. 102
r Firmware Version ......................................................................................................................................103
Technical Notes................................................................................................................................104
Optional Accessories ....................................................................................................................... 104
Approved Memory Cards ............................................................................................................................104
Image File and Folder Names ....................................................................................................... 105
Caring for the Camera ..................................................................................................................... 106
Cleaning ................................................................................................................................................................. 108
Storage .................................................................................................................................................................... 109
Error Messages................................................................................................................................... 110
Troubleshooting................................................................................................................................ 113
Specifications ..................................................................................................................................... 118
Supported Standards .....................................................................................................................................121
Index ...................................................................................................................................................... 122
Introduction
Introduction
Thank you for your purchase of a Nikon COOLPIX L20/COOLPIX L19 digital camera.
This manual was written to help you enjoy taking pictures with your Nikon digital
camera. Read this manual thoroughly before use, and keep it where all those who
use the product will read it.
Symbols and Conventions
To make it easier to find the information you need, the following symbols and
conventions are used:
Notations
A Secure Digital (SD) memory card is referred to as a memory card.
The setting at the time of purchase is referred to as the default setting.
The names of menu items displayed in the camera monitor, and the names of
buttons or messages displayed in the computer monitor appear in bold.
Screen Samples
In this manual, images are sometimes omitted from monitor display samples so
that monitor indicators can be more clearly shown.
Illustrations and Screen Display
Illustrations and text displays shown in this manual may differ from actual
display.
Illustrations and text displays shown in this manual are for COOLPIX L19.
Product Names
In this manual, the product names COOLPIX L20 and COOLPIX L19 may
sometimes be abbreviated as L20 and L19.
Memory Cards
Pictures taken with this camera can be stored in the cameras internal memory or on removable
memory cards. If a memory card is inserted, all new pictures will be stored on the memory card and
delete, playback and format operations will apply only to the pictures on the memory card. The
memory card must be removed before the internal memory can be formatted or used to store,
delete or view pictures.
Introduction
As part of Nikons Life-Long Learning commitment to ongoing product support and education,
continually updated information is available online at the following sites:
For users in the U.S.A.: http://www.nikonusa.com/
For users in Europe and Africa: http://www.europe-nikon.com/support/
For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently
asked questions (FAQs), and general advice on digital imaging and photography. Additional
information may be available from the Nikon representative in your area. See the URL below for
contact information:
http://imaging.nikon.com/
Introduction
Note that simply being in possession of material that was digitally copied or reproduced by means
of a scanner, digital camera or other device may be punishable by law.
Items prohibited by law from being copied or reproduced
Do not copy or reproduce paper money, coins, securities, government bonds or local government
bonds, even if such copies or reproductions are stamped Sample. The copying or reproduction
of paper money, coins, or securities which are circulated in a foreign country is prohibited. Unless
the prior permission of the government was obtained, the copying or reproduction of unused
postage stamps or post cards issued by the government is prohibited. The copying or
reproduction of stamps issued by the government and of certified documents stipulated by law is
prohibited.
Cautions on certain copies and reproductions
The government has issued cautions on copies or reproductions of securities issued by private
companies (shares, bills, checks, gift certificates, etc.), commuter passes or coupon tickets, except
when a minimum of necessary copies are to be provided for business use by a company. Also, do
not copy or reproduce passports issued by the government, licenses issued by public agencies
and private groups, ID cards and tickets, such as passes and meal coupons.
Comply with copyright notices
The copying or reproduction of copyrighted creative works such as books, music, paintings,
woodcut prints, maps, drawings, movies and photographs is governed by national and
international copyright laws. Do not use this product for the purpose of making illegal copies or to
infringe copyright laws.
23
Introduction
10
5
6
11
12 13
Speaker ..............................................................55
7 8 9 10
Introduction
11
12
13
Monitor .................................................................6
10
Battery-chamber/
memory card slot cover ..................12, 16
f
g
h
i
j
: wide ................................................ 21
: tele .................................................. 21
: Thumbnail playback ............. 46
: playback zoom ........................ 48
: help ................................................. 11
11 Tripod socket
12 Memory card slot ........................................16
13 Battery-chamber ..........................................12
The Monitor
Introduction
The following indicators may appear in the monitor during shooting and playback
(actual display varies with current camera settings).
The indicators and photo info displayed during shooting and playback will turn off
after a few seconds (A 89).
Shooting
4
5
1
23
22
2 3
10
7
8
21
9
20
10
19
18
11
+1.0
1/125 F3.1
17
999
14 13
12
999 a
9999
1m00s b
1m00s
16
Shooting mode*1 .........18, 27, 33, 44, 53
Macro mode .................................................. 31
Zoom indicator .....................................21, 31
AE/AF-L indicator ........................................ 43
Focus indicator ............................................. 22
Flash mode ..................................................... 28
Battery level indicator .............................. 18
Motion detection indicator ...........19, 92
Date not set indicator .........................110
9
Time zone indicator .................................. 86
10 Date imprint ................................................... 91
Image mode*2 .............................................. 71
11
Movie options ............................................... 54
1
2
3
4
5
6
7
8
15
12
13
14
15
16
17
18
19
20
21
22
23
*1 Differs according to the current shooting mode. Refer to the sections on each mode for details.
*2 K and K are displayed on L20, and z and y are displayed on L19.
Introduction
Playback
15/05/2009 12:00
9999.JPG
13
10
12
11
5
999 999
8
999 999 a
9999 9999
1m00s b
1m00s
3 Volume .............................................................. 55
Basic Operations
The Shooting Mode Button
Introduction
2
3
4
* The displayed icons vary depending on the last scene mode selected.
While the shooting-mode selection menu is displayed, you can return to shooting
mode by pressing the shooting mode button again.
c (playback) button
During shooting mode, the camera enters the
playback mode when c is pressed.
If the camera is turned off, hold down c to turn
the camera on in playback mode.
Basic Operations
This section describes standard uses of the multi selector to select modes, select
menu options and to apply selection.
For Shooting
Display m (flash mode) menu (A 28)/select the item above.
Display n
(self-timer) menu
(A 30).
Display o (exposure
compensation)
menu (A 32).
Flash mode
Apply selection.
Display p (macro mode) menu (A 31).
For Playback
15/05/2009 15:30
0004.JPG
Display the
previous picture.
Shooting menu
Image mode
White balance
Continuous
Color options
Exit
In this manual, H, I, J and K are used in some cases for indicating the up, down, left and right
operating parts of the multi selector.
Basic Operations
d button
Introduction
Shooting menu
Image mode
White balance
Continuous
Color options
Exit
Displayed when
there are one or
more menu items
to follow.
AF assist
Set up
Displayed when
there are more
previous menu
items.
Motion detection
AF assist
Sound settings
Auto off
Format memory
Auto
Off
Exit
Exit
10
Shooting menu
Image mode
White balance
Continuous
Color options
Exit
Set up
Menus
Welcome screen
Date
Monitor settings
Date imprint
Exit
When using the following modes, you can display the tabs by pressing the multi
selector J while the menu is displayed.
Easy auto mode, scene mode, smile mode and movie mode
Basic Operations
Help Displays
Continuous
Choose single frame, continuous
mode, BSS (camera chooses
sharpest shot in series), or
multi-shot 16.
Exit
Introduction
Press g (j) when M/j is displayed at the lower right of the menu screen to
view a description of the currently selected option.
To return to the original menu, press g (j) again.
Back
11
First Steps
First Steps
Applicable Batteries
This camera uses the following R6/AA-size batteries.
Two LR6/L40 alkaline batteries (batteries supplied)
Two FR6/L91 lithium batteries
Two EN-MH2 Ni-MH (nickel metal hydride) rechargeable batteries
12
Confirm the power-on lamp and the monitor are off and open the battery-chamber/ memory card
slot cover.
First Steps
Battery Type
To improve battery performance, select the type of battery currently inserted in the camera in the
setup menu. The default setting is the type of battery supplied with purchase. When any other type
of battery is used, turn the camera on and change the setting (A 100).
Alkaline Batteries
Performance of alkaline batteries may vary greatly depending on the manufacturer. Choose a
reliable brand.
To power the camera continuously for extended periods, use an AC Adapter EH-65A (available
separately) (A 104). Do not, under any circumstances, use another make or model of AC
adapter. Failure to observe this precaution could result in overheating or in damage to the camera.
If no operations are performed for about 30 seconds (default setting), the monitor turns off and the
camera enters standby mode. After a further three minutes, the Auto off function will turn the camera
off automatically. While the monitor is off during standby mode, it will turn on again when the power
switch or shutter-release button is pressed. The amount of time that passes before the camera enters
standby mode is determined by the Auto off setting (A 94) in the setup menu (A 82).
13
First Steps
Date
No
Yes
Cancel
London
Casablanca
Back
Back
14
Date
D
01
01
2 009
00
00
Date
D
15
05
2009
15
First Steps
Edit
10
Edit
To change the date and time, select Date from Date (A 86) in the setup menu (A 82) and
follow the instructions starting from the above step 5.
To change the time zone and the daylight saving settings, select Time zone from Date in the
setup menu (A 86, 87).
15
First Steps
16
1 2
First Steps
Memory Cards
17
Description
The battery level is high.
Batteries low.
Prepare to replace batteries.
Cannot take pictures. Replace
with new batteries.
Number of exposures
remaining
18
Image mode
Display image size and quality set in
the image mode menu. The default
settings are as follows:
L20: K Normal (36482736)
L19: y Normal (32642448)
The indicators and photo info displayed during shooting and playback will turn off
after a few seconds (A 89).
When the camera is pointed at a persons face, the camera automatically recognizes the face and
focuses on it.
The flash setting can be set to W (off) (A 28).
The self-timer (A 30) and exposure compensation (A 32) are available.
In G (easy auto) mode, the image mode (A 71) can be changed by pressing d.
See Easy auto mode (A 26) for more information.
When Motion detection (A 92) in the setup menu (A 82) is set to AUTO (default setting), if
the camera detects a moving subject or camera shaking while shooting still pictures, shutter
speed increases to reduce blurring. (This function is not activated in the movie mode.)
When the camera detects shaking and increases shutter speed, the motion detection indicator
turns green.
19
20
The desired scene mode may not be selected in certain conditions. In this case, select another
shooting mode.
When digital zoom is in effect, the shooting mode is U.
Digital Zoom
When the optical zoom is set at the telephoto end, i.e. at maximum magnification,
holding down g triggers digital zooming. The subject is magnified up to a max.
optical zoom magnification of 4.
The focus area is not displayed when digital zoom is in effect, and focus will be in
the center of the screen.
Maximum magnification
of optical zoom.
Optical Digital
zoom zoom
Unlike optical zoom, digital zoom uses a digital imaging process known as interpolation to magnify
images, resulting in slight deterioration of picture quality.
Interpolation is applied at zoom positions beyond V.
When zoom is increased beyond the V position, interpolation is initiated and the zoom indicator
turns yellow to indicate that interpolation is being applied.
The position of V moves to the right as image size decreases, allowing for confirmation of the
zoom positions at which shooting without interpolation is possible at the current image mode
setting.
21
1/125
F3.1
1/125 F3.1
Shutter Aperture
Speed
When using the digital zoom, the
camera focuses on the center of the
frame, but the focus area is not
displayed. When the subject is in focus,
the focus indicator (A 6) will glow
green.
Focus indicator
1/125 F3.1
22
During Recording
While pictures are being recorded, the number of exposures remaining display will blink. Do not
open the battery-chamber/memory card slot cover.
Removing the memory card or the battery during recording may result in loss of data or in damage
to the recorded data, camera or card.
Autofocus performance
Blink Warning
Autofocus may not perform as expected in the following situations. In some rare cases, the subject
may not be in focus despite the fact that the focus area or the focus indicator glows green:
Subject is very dark
Objects of sharply differing brightness are included in the scene (e.g. the sun is behind the subject
and is in deep shadow)
No contrast between the subject and surroundings (e.g. when the subject is standing in front of a
white wall, wearing a white shirt)
Several objects are at different distances from the camera (e.g. the subject is inside a cage)
Subject is moving rapidly
In these situations, try pressing the shutter-release button halfway again to refocus, several times if
necessary. If the subject is still not in focus, select auto mode and use focus lock (A 27) to take the
picture by first focusing on an object that is the same distance from the camera as the desired
subject.
If the Did someone blink? screen is displayed shortly after the picture is taken in the Face Priority,
someones eyes may have been closed during the shot.
Did someone blink?
Exit
Human subjects with eyes closed will be framed by a yellow border in the Did someone blink?
screen.
To return to the shooting mode, press k or press the shutter-release button halfway.
See Blink warning (A 97) in the setup menu (A 82) or Operating the Did someone blink?
Screen (A 97) for more information.
If the subject is poorly lit, the AF-assist illuminator (A 92) may light by pressing the shutter-release
button halfway, or the flash (A 28) may fire by pressing the shutter-release button all the way down.
23
c (playback)
Internal memory
indicator
Deleting Pictures
24
15/05/2009 15:30
0004.JPG
Erase 1 image?
Done
No
Yes
Playback Mode
Option
Playback zoom
View thumbnails/
calendar
Use
g (i)
f (h)
48
46
Power on by pressing c
When the camera is off, hold down c to turn on the camera in playback mode. The lens will not
extend.
Viewing Pictures
Pictures stored in the internal memory can only be viewed if no memory card is inserted.
Pictures taken with face priority (A 22) will be automatically rotated when viewing them fullframe.
Switch to shooting
mode
Description
The picture can be enlarged up to
about 10. Press k to return to fullframe playback.
No
Yes
When Delete (A 81) is selected from the playback menu (A 78), multiple pictures can be
deleted.
25
The camera automatically selects one of the following scenes when you point the
camera at a subject.
U Auto mode (general use) (A 27)
e Portrait (A 34)
f Landscape (A 34)
g Night landscape (A 37)
h Night portrait (A 35)
j Backlight (A 39)
i Close-up (A 37)
26
Auto Mode
Auto Mode
Focus Lock
When the camera focuses on an object in the center of the frame, you can use focus lock to focus on an off-center subject.
Be sure that the distance between the camera and the subject does not change while focus is locked.
When the shutter-release button is pressed halfway, exposure is locked.
1/125 F3.1
1/125 F3.1
Continue holding
down the shutterrelease button
halfway and
recompose the
picture.
Press the
shutterrelease
button the
rest of the
way down.
In addition to the items in shooting menu, flash mode (A 28) can be changed and self-timer
(A 30), macro mode (A 31) and exposure compensation (A 32) can be applied.
27
Auto Mode
U Auto
Flash fires automatically when lighting is poor. In G (easy auto) mode (A 18), the
camera will determine the flash mode automatically according to the scene.
V Auto with red-eye reduction
Reduces red-eye in portraits (A 29).
W
Off
Flash will not fire even when lighting is poor.
X
Fill flash
Flash fires when a picture is taken. Use to fill-in (illuminate) shadows and back-lit
subjects.
Y
Slow sync
Auto flash mode is combined with slow shutter speed.
Flash illuminates main subject; slow shutter speeds are used to capture background
at night or under dim light.
Flash mode
28
Use of a tripod is recommended to stabilize the camera during shooting and avoid the effects of
camera shake.
The E is displayed when the camera automatically increases sensitivity to minimize blur caused
by slow shutter speed. Pictures taken when E is displayed may be slightly mottled.
When using the flash, reflections from dust particles in the air may appear as bright spots in pictures.
To reduce these reflections, set the flash to W (Off).
Auto Mode
The flash lamp indicates flash status when the shutterrelease button is pressed halfway.
On:
Flash will fire when picture is taken.
Blinks: Flash charging. Wait a few seconds and try
again.
Off:
Flash will not fire when picture is taken.
If the remaining battery level is low, the monitor will turn off until the flash has finished charging.
The default setting of the flash mode depends on the shooting mode.
G (easy auto) mode: U Auto
a (smile) mode: U Auto
Scene mode: The default setting depends on the scene menu (A 33).
A (auto) mode: U Auto
When the shooting mode is A (auto) mode, the changed flash setting will be stored even if the
camera is turned off.
Red-eye Reduction
29
Press n (self-timer).
The self-timer menu is displayed.
Auto Mode
10
1/125 F3.1
30
1/125 F3.1
Macro Mode
Macro mode is used for taking pictures of objects as close as 5 cm (2 in.). Note that
the flash may be unable to light entire subject at distances of less than 50 cm (1 ft.
8 in.).
Macro mode cannot be used with easy auto mode (A 18).
Auto Mode
Macro Mode
In macro mode, the camera focuses continuously, even when the shutter-release button is not
pressed halfway to lock focus. When the shutter-release button is halfway pressed, the focus is
locked to adjust the exposure.
When the shooting mode is A (auto) mode, the macro mode setting will be stored even if the
camera is turned off.
31
Exposure Compensation
Exposure compensation is used to alter exposure from the value suggested by the
camera to make pictures brighter or darker.
Auto Mode
When the shooting mode is A (auto) mode (A 27), the exposure compensation setting will be
stored even if the camera is turned off.
32
The camera tends to lower exposure when the frame is dominated by brightly lit objects and to
increase exposure when the frame is mostly dark. Positive compensation may therefore be required
to capture the brilliancy of very bright objects that fill the frame (for example, sunlit expanses of
water, sand, or snow) or when the background is much brighter than the main subject. Negative
compensation may be called for when large areas of the frame contain very dark objects (for
example, a swath of dark green leaves) or when the background is much darker than the main
subject.
f Party/indoor
j Night landscape
m Fireworks show
c Landscape
g Beach/snow
k Close-up
n Copy
d Sports
h Sunset
u Food
o Backlight
e Night portrait
i Dusk/dawn
l Museum
p Panorama assist
Portrait
Beach/snow
Image Mode
You can set the Image mode (A 71) only by pressing d. If the image mode setting is changed,
the new image mode setting is also applied to other shooting modes (except movie mode).
33
Features
b Portrait
Use this mode for portraits in which the main subject stands
out clearly. Portrait subjects exhibit smooth, natural-looking
skin tones.
If the camera recognizes a persons face (front view), the
camera will focus on that person (face priority: A 22).
If more than one face is recognized, the camera focuses on
the face closest to the camera.
If no faces are recognized, focus will be on the center of the screen.
Digital zoom is not available.
m
V*
Off*
Off
0.0*
0.0*
c Landscape
Use this mode for vivid landscapes and cityscapes.
Camera focuses at infinity. The focus area or focus indicator
(A 6) always glows green when the shutter-release button
is pressed halfway. Note, however, that objects in the
foreground may not always be in focus.
The AF-assist illumination turns off automatically regardless
of the setting of the AF-assist illumination (A 92).
m
Off*
Off
d Sports
Use this mode for dynamic action shots that freeze the action
in a single shot and record motion in a series of pictures.
The camera focuses continuously until the shutter-release
button is pressed halfway to lock the focus.
While the shutter-release button is held down, up to 5
pictures are taken at a rate of about 1.4 frames per second
(fps) for L20 and 1.0 fps for L19 when image mode is set to
i Normal (3648) for L20 and R Normal (3264) for L19.
The maximum frame rate with continuous shooting may vary depending upon the
current image mode setting and the memory card used.
The AF-assist illumination turns off automatically regardless of the setting of the AF-assist
illumination (A 92).
m
W
n
Off
p
Off
o
0.0*
* Other settings can be selected.
C
34
The following icons are used for descriptions in this section: m, flash mode (A 28); n, self-timer
(A 30); p, macro mode (A 31); o, exposure compensation (A 32).
e Night portrait
V*1
Off*2
Off
0.0*2
Off
0.0*2
V*1
Off*2
*1
The flash may change to slow sync with red-eye reduction. Other settings can be selected.
*2 Other settings can be selected.
f Party/indoor
35
U*
Off*
Off*
0.0*
0.0*
0.0*
h Sunset
Preserves the deep hues seen in sunsets and sunrises.
Camera focuses on subject in center of frame.
W*
Off*
Off
i Dusk/dawn
Off*
Off
36
j Night landscape
Off*
Off
0.0*
0.0*
k Close-up
W*
Off*
On
* Other settings can be selected. Note that the flash may be unable to light entire subject at
distances of less than 50 cm (1 ft. 8 in.).
37
Off*
On
0.0*
0.0*
0.0
l Museum
Off*
Off*
m Fireworks show
38
Off
Off
W*
Off*
Off*
0.0*
0.0*
o Backlight
Off*
Off
p Panorama assist
Use when taking a series of pictures that will later be joined to form a single panorama
using the supplied Panorama Maker software. See Taking Pictures for a Panorama (A 42)
for details.
m
W*
Off*
Off*
0.0*
39
Food
40
The flash is disabled. The macro mode (A 31) will be locked to ON.
41
42
End
End
Panorama Assist
Apply flash mode, self-timer, macro mode and exposure compensation settings before taking the
first picture. These settings cannot be changed after the first picture is taken. Image mode (A 71)
settings, zoom operation, and image deletion are not possible.
The panorama series is terminated if the camera enters standby mode with the auto off function
(A 94) during shooting. Setting the time allowed to elapse before the auto off function is enabled
to a longer setting is recommended.
Note on R
End
Panorama Maker
More Information
See, Image File and Folder Names (A 105) for more information.
43
Smile
44
When using Smile mode, auto off (A 94) will turn the camera off if no operations are performed in
the following situations:
The camera does not recognize any faces.
The camera recognized the face but cannot detect a smiling face.
When the camera is pointed at a persons face (front view) in the smile mode, the face is
automatically recognized and the smiling face of the recognized person is detected.
In some shooting conditions, face recognition does not work and faces cannot be detected.
See Face Priority (A 22) for more information about Face Priority.
Settings can be changed for Flash mode (A 28) and Exposure Compensation (A 32).
Pressing the d button in the smile mode can change the image mode (A 71). Changes made
to these settings apply to all shooting modes (except movie mode).
Digital zoom is not available.
More Information
45
More on Playback
Description
Choose pictures
To
More on Playback
Switch to full-frame
playback
Switch to shooting
mode
Use
f (h)
g (i)
g (i)
24
Protect icon
Print-order icon
1
Film frames
46
Calendar Display
When displaying 25 thumbnail frames in playback
mode (A 46), switch to calendar display by pressing
f (h).
You can select images to view based on the day they
were taken. Days containing pictures have a yellow line
under them.
To
Use
Choose date
Switch to full-frame
playback
Switch to thumbnail
display
g (i)
Description
24
More on Playback
Calendar display
Pictures taken when the cameras date is not set are treated as pictures taken on January 1, 2009.
The l and d buttons are not available during calendar display.
47
Zoom out
Use
Description
g(i)
f(h)
Press k.
24
51
Crop picture
k
d
Switch to shooting
mode
48
Editing Pictures
Use the camera to edit pictures in-camera and store them as separate files
(A 105). The editing features described below are available.
Editing function
Description
D-Lighting (A 50)
Crop (A 51)
Picture Editing
More on Playback
Pictures taken at an Image mode setting (A 71) of P 16:9 (3584) on L20 and P 16:9 (3200)
on L19 cannot be edited.
Only pictures taken with the COOLPIX L20/COOLPIX L19 can be edited with this camera.
When using a different model of digital camera, pictures edited with this camera may not be
displayed properly and may not be able to be transferred to a computer.
Editing functions are not available when there is not enough free space in the internal memory or
on the memory card.
2nd editing
1st editing
D-Lighting
Crop
Small picture
D-Lighting
Crop
Small picture
Copies created with editing functions are not deleted if the original pictures are deleted. The
original pictures are not deleted if copies created with editing functions are deleted.
Edited copies are stored with the same recording date and time as the original.
Edited copies do not retain the Print set (A 67) and Protect (A 100) settings of the original.
49
Editing Pictures
Playback menu
D-Lighting
Print set
Slide show
Delete
Small picture
Exit
D-Lighting
More on Playback
15/05/2009 15:30
0005.JPG
D
50
More Information
See, Image File and Folder Names (A 105) for more information.
Editing Pictures
Press d.
More on Playback
No
Yes
The smaller the cropped area of the image, the smaller of the cropped image size (number of pixels).
When the image is cropped and the size of the cropped copy is 320 240 or 160 120, a small
picture icon l or m will be displayed on the left of the playback screen.
More Information
See, Image File and Folder Names (A 105) for more information.
51
Editing Pictures
Description
l 640480
l 320240
m 160120
More on Playback
Playback menu
D-Lighting
Print set
Slide show
Delete
Small picture
Exit
Small picture
640 480
320 240
160 120
Exit
D
52
More Information
See, Image File and Folder Names (A 105) for more information.
No
Yes
Movies
Recording Movies
To shoot movies with sound recorded via the built-in microphone, select shooting
mode and follow the steps below.
Movie
4s
Recording will end automatically if the internal memory or memory card becomes full,
or after recording a single movie for 25 minutes.
Movies
To end recording, press the shutter-release button all the way down a second time.
Recording Movies
Macro mode (A 31) is available. Flash mode (A 28), exposure compensation (A 32), self-timer
(A 30) cannot be used.
Macro mode settings cannot be applied or changed while movies are being recorded. Apply or
change settings as necessary before movie recording begins.
Optical zoom cannot be applied while movies are recorded. Digital zoom cannot be used just
before recording a movie, but up to 2 digital zoom can be applied while movies are recorded.
During Recording
The movie is being recorded from when the movie shooting was terminated to when the shooting
screen appears.
Do not open the battery-chamber / memory card slot cover.
Removing the memory card or the battery during the movie recording may result in loss of the
movie data or damage to the camera or the memory card.
Autofocus
Camera focuses when shutter-release button is pressed halfway and locks at this position during
shooting. The focus is set to this position during recording.
53
J TV movie 640P
(default setting)
Movies
J TV movie 640P
(default setting)
11 s
Approx. 5 min 10 s
47 s
Approx. 20 min 45 s
1 min 34 s
Approx. 25 min
Option
* All figures are approximate. Maximum movie length or frames varies with make of memory card.
The maximum recording time for movies is 25 minutes. Even if the memory card has capacity to
record for more than 25 minutes, the camera displays no more than 25 minutes as the available
recording time.
D
54
More Information
Movie Playback
In full-frame playback mode (A 24), movies are
recognized by the Movie options icon (A 54). To play
a movie, display it in full-frame playback mode and
press k.
15/05/2009 15:30
0010.AVI
0010.AVI
10s
Pausing
4s
During
playback
Press
Description
Rewind
Advance
Pause
End
Movies
To
Volume
indicator
Resume playback
Erase 1 image?
No
Yes
55
Connecting to a TV
Connect the camera to a television using the supplied audio video cable (AV
cable) (supplied only with the COOLPIX L20) to play back pictures on a television.
Connect the camera to the TV using the supplied audio video cable.
Connect the yellow plug to the video-in jack on the TV, and the white plug to the audioin jack.
Yellow
White
Connecting an AV Cable
When connecting the AV cable, be sure that the camera connector is oriented correctly. Do not use
force when connecting the AV cable to the camera. When disconnecting the AV cable, do not pull
the connector at an angle.
B
56
Video Mode
Be sure that the cameras video mode setting conforms to the standard used by your television. The
video mode setting is an option set in the Set up menu (A 82) > Video mode (A 96).
Connecting to a Computer
Use the supplied USB cable to connect the camera to a computer, and copy
(transfer) pictures to a computer with the supplied Nikon Transfer software.
When connecting the camera to a computer or printer, use batteries with adequate charge
remaining to power the camera to prevent the camera from turning off unexpectedly.
To power the camera continuously for extended periods, use an AC Adapter EH-65A (available
separately) (A 104). Do not, under any circumstances, use another make or model of AC adapter.
Failure to observe this precaution could result in overheating or in damage to the camera.
57
Connecting to a Computer
1
2
3
58
When connecting the USB cable, be sure that the connectors are oriented correctly. Do not use
force when connecting the USB cable. When disconnecting the USB cable, do not pull the
connector at an angle.
Connection may not be recognized when the camera is connected to a computer via a USB hub.
Connecting to a Computer
At the Nikon Transfer default setting, the folder to which pictures are transferred is
automatically opened when transfer is complete.
When ViewNX is installed, ViewNX automatically starts to check the transferred pictures.
For more information on using Nikon Transfer or ViewNX, refer to the help information
included with the respective software.
59
Connecting to a Computer
The pictures stored on the memory card inserted into a card reader or similar device can also be
transferred to the computer using Nikon Transfer.
If the memory card has a capacity greater than 2 GB, or is SDHC-compliant, the intended device
must support these features of the memory card.
At the Nikon Transfer default settings, Nikon Transfer will start automatically when a memory card
is inserted into the card reader or similar device. See step 5 of Transferring Pictures from a Camera
to a Computer (A 59)
To transfer pictures stored in the cameras internal memory to the computer, the pictures must
first be copied to a memory card using the camera (A 102).
Navigate to the folder on the computers hard disk to which pictures were saved and open a
picture in the viewer supplied with your operating system.
Use a series of pictures taken using the Panorama assist option in scene mode (A 33) to create
a single panorama photo with Panorama Maker.
Panorama Maker can be installed to a computer using the supplied Software Suite CD.
After installation is complete, follow the procedure described below to start Panorama Maker.
Windows
Open All Programs from the Start menu>ArcSoft Panorama Maker 4>Panorama Maker 4.
Macintosh
Open Applications by selecting Applications from the Go menu, and double-click the
Panorama Maker 4 icon.
For more information on using Panorama Maker, refer to the on-screen instructions and help
information contained in Panorama Maker.
More Information
60
Connecting to a Printer
Users of PictBridge-compatible (A 121) printers can connect the camera directly
to the printer and print pictures without using a computer.
Take pictures
Select pictures for printing
using Print set option
(A 67)
When connecting the camera to a computer or printer, use a fully charged batteries to prevent the
camera from turning off unexpectedly.
To power the camera continuously for extended periods, use an AC Adapter EH-65A (available
separately) (A 104). Do not, under any circumstances, use another make or model of AC adapter.
Failure to observe this precaution could result in overheating or in damage to the camera.
Printing Pictures
In addition to printing pictures transferred to a computer from your personal printer and printing
over a direct camera-to-printer connection, the following options are also available for printing
pictures:
Insert a memory card into a DPOF-compatible printers card slot
Take a memory card to a digital photo lab
For printing using these methods, specify the pictures and the number of prints each using your
cameras Print set menu (A 67).
61
Connecting to a Printer
Connect the camera to the printer using the supplied USB cable.
2 Print selection
2009
05/15
NO.12
[ 12]
B
62
When connecting the audio video/USB cable, be sure that the connectors are oriented correctly. Do
not use force when connecting the audio video/USB cable. When disconnecting the audio video/
USB cable, do not pull the connector at an angle.
Connecting to a Printer
Print selection
2009
05/15
PictBridge
Start print
Copies
Paper size
Exit
Copies
NO.12
[ 12]
Exit
PictBridge
Start print
Copies
Paper size
Exit
Paper size
4 6 in.
8 10 in.
Letter
A3
A4
Exit
63
Connecting to a Printer
PictBridge
Start print
Copies
Paper size
Exit
Printing starts.
Monitor display returns to that shown in step 1 when
printing is complete.
Printing
002/004
Cancel
Print menu
Print selection
Print all images
DPOF printing
Paper size
Exit
64
Paper size
4 6 in.
8 10 in.
Letter
A3
A4
Exit
Connecting to a Printer
Print menu
Print selection
Print all images
DPOF printing
Paper size
Exit
Print selection
10
Back
Print selection
010 prints
Print selection
Start print
Cancel
Exit
65
Connecting to a Printer
DPOF printing
Print pictures for which a print order was created
in Print set (A 67).
The menu shown at right will be displayed.
To print, choose Start print and press k.
Choose Cancel and press k to return to the
print menu.
Start print
View images
Cancel
Exit
View images
10
Back
Printing starts.
Monitor display returns to the print menu (step 2) when
printing is complete.
To cancel before all copies have been printed, press k.
Printing
002/010
Cancel
66
DPOF printing
010 prints
Paper Size
The camera supports the following paper sizes: Default (the default paper size for the current
printer), 3.5 5 in., 5 7 in., 100 150 mm, 4 6 in., 8 10 in., Letter, A3, and A4. Only sizes
supported by the current printer will be displayed. To specify paper size using printer settings,
choose Default in the paper size menu.
Playback menu
D-Lighting
Print set
Slide show
Delete
Small picture
Exit
Print set
Select images
Delete print set
Exit
Print selection
Press g (i) to switch to full-frame playback. Press f (h) to switch back to thumbnail
display.
Press k when setting is complete.
67
Print set
Done
Date
Info
Exit
15/05/2009 15:30
0004.JPG
When the Date and Info options are enabled in the print set menu, shooting date and photo
information are printed on pictures when a DPOF-compatible (A 121) printer which supports
printing of shooting date and photo information is used.
Photo information cannot be printed when the camera is connected directly to a printer, via the
supplied USB cable, for DPOF printing (A 65).
Date and Info are reset each time the print set menu is displayed.
Choose Delete print set in step 3 and press k. Print orders for all pictures will be deleted.
The date and time printed on pictures with DPOF printing when
Date in the Print set menu is enabled, are those recorded with the
picture when it was taken. Date and time printed using this option
are not affected when the cameras date and time setting are
changed from the setup menu after pictures are recorded.
68
Date Imprint
15.05.2009
Image mode*
A 71
White balance
A 73
Continuous
A 75
Color options
A 76
69
70
Exit
A Image mode
Set A (Auto) mode (A 27) M d (shooting menu) M A image mode
Pictures taken with a digital camera are recorded as image files. The size of the
files, and with it the number of images that can be recorded, depends on the size
and quality of the images. Before shooting, choose an image mode according to
how you plan to use the picture.
Setting
Description
3,648 2,736
High (3264 P)
(L19 Only)
3,264 2,448
Normal (3648)
(L20 Only: Default
setting)
3,648 2,736
Normal (3264)
(L19 Only: Default
setting)
3,264 2,448
Normal (2592)
2,592 1,944
Normal (2048)
2,048 1,536
PC screen (1024)
1,024 768
TV screen (640)
640 480
3,584 2,016
3,200 1,800
Size (pixels)
High (3648 P)
(L20 Only)
The icon for the current setting is displayed in the monitor in shooting and
playback modes (A 6, 7).
Image Mode
Changes made to these settings apply to all shooting modes (except movie mode).
71
The following table lists the approximate number of pictures that can be stored in internal memory
and on a 512 MB memory card. Note that the number of pictures that can be stored will differ
depending on the composition of the picture (due to JPEG compression). In addition, this number
may differ depending on the make of memory card, even if the capacity for the memory card is the
same.
Image mode
Internal memory
(Approx. 20 MB)
Memory card *1
(512 MB)
High (3648 P)
(L20 Only)
Approx. 75
Approx. 31 23/12.2 9
High (3264 P)
(L19 Only)
Approx. 90
Normal (3648)
(L20 Only)
Approx. 150
Approx. 31 23/12.2 9
Normal (3264)
(L19 Only)
Approx. 185
L Normal (2592)
11
Approx. 300
M Normal (2048)
18
Approx. 480
PC screen
N
(1024)
51
Approx. 1,370
O TV screen (640)
83
Approx. 2,210
16:9 (3584)
P
(L20 Only)
Approx. 205
16:9 (3200)
(L19 Only)
Approx. 260
P
*1
If the number of exposures remaining is 10,000 or more, the number of exposures remaining
display shows 9999.
*2
When the printer resolution is set to 300 dpi.
Print sizes are calculated by dividing the number of pixels by printer resolution (dpi) and
multiplying by 2.54 cm (1 in.). However, at the same image size, pictures printed at higher
resolutions will print smaller than the size indicated, and those printed at lower resolutions will
print larger than the size indicated.
72
B White Balance
Set A (Auto) mode (A 27) M d (shooting menu) M B White Balance
The color of light reflected from an object varies with the color of the light source.
The human brain is able to adapt to changes in the color of the light source, with
the result that white objects appear white whether seen in the shade, direct
sunlight, or under incandescent lighting. Digital cameras can mimic this
adjustment by processing images according to the color of the light source. This is
known as white balance.
Although the default setting, Auto can be used under most types of lighting, you
can apply the white balance setting suited to a particular light source to achieve
more accurate results.
a
Preset manual
Neutral-colored object used as reference to set white balance under unusual
lighting conditions. Please refer to Preset Manual for more information(A 74).
Daylight
White balance adjusted for direct sunlight.
Incandescent
Use under incandescent lighting.
Fluorescent
Cloudy
Use when taking pictures under overcast skies.
Flash
Use with the flash mode.
The effects of the selected option can be previewed in the monitor. At settings
other than Auto, the icon for the current setting is displayed on the monitor
(A 6).
Flash Mode
At white-balance settings other than Auto or Flash, turn the flash off (W) (A 28).
73
Preset Manual
Preset manual is used with mixed lighting or to compensate for light sources with
a strong color cast (for example, to make pictures taken under a lamp with a red
shade look as though they had been taken under white light).
Place a white or gray reference object under the lighting that will be
used during shooting.
White balance
Choose Measure.
Auto
Preset manual
Daylight
Incandescent
Fluorescent
Exit
Preset manual
Preset manual
Cancel
Measure
Exit
Press k.
The shutter is released and the new white-balance value is set.
No pictures are recorded.
B
74
Regardless of the flash mode selected, the flash will not fire when k is pressed in step 5. Therefore,
the camera cannot measure a value for preset manual for when the flash is used.
C Continuous
Set A (Auto) mode (A 27) M d (shooting menu) M C Continuous
Continuous
While the shutter-release button is held down, up to 5 pictures are taken at a rate of
about 1.4 frames per second (fps) for L20 and 1.0 fps for L19 when image mode is
set to i Normal (3648) for L20 and R Normal (3264) for L19.
Multi-shot 16
Each time the shutter-release button is pressed all the way
down, the camera takes 16 shots at a rate of about 1.4 frames
per second (fps) for L20 and 1.6 fps for L19, then arranges
them in a single picture. Image mode is locked at i Normal
(3648) for L20 and R Normal (3264) for L19.
Digital zoom cannot be applied.
The best shot selector is recommended when shooting with the flash off or the
camera zoomed in, or in other situations in which inadvertent motion can result in
blurred pictures.
When BSS is on, the camera takes up to 10 pictures while the shutter-release button
is held down. The sharpest picture in the series is automatically selected and saved.
At settings other than Single, the indicator for the current setting is displayed in
the monitor (A 6).
The maximum frame rate with continuous shooting may vary, depending upon the current image
mode setting and the memory card used.
Note on BSS
BSS may not produce the desired results if the subject moves or the composition changes while the
shutter-release button is pressed all the way down.
75
F Color Options
Set A (Auto) mode (A 27) M d (shooting menu) M F Color Options
Vivid color
Use to achieve a vivid, photoprint effect.
Black-and-white
Record pictures in black-and-white.
Sepia
Record pictures in sepia tones.
76
Cyanotype
Record pictures in cyan-blue monochrome.
The effects of the selected option can be previewed in the monitor. At settings
other than Standard color, the icon for the current setting is displayed in the
monitor (A 6).
White balance
77
A 50
D-Lighting
Enhances brightness and contrast in dark portions of pictures.
A 67
Print set
Select pictures to print and the number of copies for each.
A 80
Slide show
A 81
Delete
Delete selected pictures or all pictures.
A 52
Small picture
Create a small copy of the current picture.
78
Back
79
b Slide Show
Press c (playback mode) M d (playback menu) M b Slide show
Play back pictures, stored in the internal memory or on a memory card, one by one
in an automated slide show.
Slide show
Pause
Start
Loop
Exit
Pause
Restart
End
B
80
Only the first frame of movies (A 55) included in slide shows is displayed.
Even if Loop is selected, the monitor can continuously display the Slide Show for up to 30 minutes
(A 94).
c Delete
Press c (playback mode) M d (playback menu) M c Delete
Notes on Deletion
Once deleted, pictures cannot be recovered. Transfer important images to a computer before
deletion.
Pictures marked with the s icon are protected and cannot be deleted. (A 100)
81
Menus
A 84
Welcome screen
A 85
Date
A 86
Set camera clock and choose home and destination time zones.
e
Monitor settings
A 89
Date imprint
A 91
Motion detection
A 92
Set whether or not the camera automatically increases the shutter speed to
reduce blurring when motion is detected while shooting still pictures.
h
AF assist
A 92
Sound settings
A 93
Auto off
A 94
A 95
Language
A 96
Video mode
A 96
Blink warning
A 97
Set whether or not to detect human subjects with eyes closed when shooting
pictures in the face priority (A 22).
p
Reset all
A 98
Battery type
Select the type of batteries used.
82
A 100
A 100
Protect
Protect selected pictures from accidental deletion.
A 101
Rotate image
Change the orientation of a picture.
A 102
Copy
Copy files between memory card and internal memory.
A 103
Firmware version
Display camera firmware version.
Image mode
High (3264 )
Normal (3264)
Normal (2592)
Normal (2048)
PC screen (1024)
Exit
Shooting menu
Image mode
White balance
Continuous
Color options
Exit
Image mode
Exit
83
Set up
Menus
Welcome screen
Date
Monitor settings
Date imprint
Exit
Press K or k.
You can now select an item from the setup menu.
Use the multi selector to choose and apply settings
(A 9).
To exit the setup menu, press the d or press J and
select another tab.
Set up
Menus
Welcome screen
Date
Monitor settings
Date imprint
Exit
a Menus
Press d M z (setup menu) (A 83) M a Menus
Set up
Menus
Welcome screen
Date
Monitor settings
Date imprint
Exit
Icons
All menu items can be displayed in a single page.
Menu names
Menus
Exit
84
c Welcome Screen
Press d M z (setup menu) (A 83) M c Welcome screen
You can select the welcome screen to be displayed when the camera is turned on.
None (default setting)
No welcome screen will be displayed.
COOLPIX
Displays a welcome screen.
Select an image
Select a picture in the internal memory or on the memory card for the welcome
screen. Choose a picture in the Select image screen and press k. As the selected
image is stored in the camera, the image will appear in the welcome screen even if
the original picture is deleted.
Pictures which are set as 16:9 on Image mode setting (A 71) and images smaller
than 320 240 edited by the crop (A 51) or small picture (A 52) function are not
selectable.
85
d Date
Press d M z (setup menu) (A 83) M d Date
Set the home (w) time zone (district) or daylight saving time. When the destination
time zone (x) is selected, the time difference (A 88) is automatically calculated
and the date and time in the selected region are recorded. Useful when travelling.
Date
15/05/2009 15:30
Date
Time zone
Exit
Time zone
15/05/2009 15:30
London, Casablanca
Home time zone
Travel destination
Exit
86
Press K.
The new city time zone menu is displayed.
Time zone
15/05/2009 15:30
London, Casablanca
Home time zone
Travel destination
Exit
11:30
- 0 4 : 00
EDT:
New York
Toronto
Lima
Back
While the travel destination time zone is selected, the Z icon will be displayed in the
monitor when the camera is in shooting mode.
The camera's clock is powered by a clock battery that is independent of the batteries that powers
the camera. The clock battery charges when the main batteries are installed or an AC adapter is
connected, and can provide several days of backup power after about ten hours of charging.
When the summer saving time begins or ends, turn the daylight saving time option on or off using
the home time zone display in Step 4.
87
UTC
+/-
88
Time zone
UTC
+/-
Time zone
-11
Midway, Samoa
+1
-10
Hawaii, Tahiti
+2
-9
Alaska, Anchorage
+3
-8
+4
-7
+5
Islamabad, Karachi
-6
-5
+6
Colombo, Dhaka
-4
Caracas, Manaus
+7
Bangkok, Jakarta
-3
+8
-2
Fernando de Noronha
+9
Tokyo, Seoul
-1
Azores
+10
Sydney, Guam
London, Casablanca
+11
New Caledonia
+12
Auckland, Fiji
+5.5
New Delhi
e Monitor Settings
Press d M z (setup menu) (A 83) M e Monitor settings
89
Photo Info
The following display options are available.
See The Monitor (A 6, 7) for information on indicators in the monitor.
Shooting mode
Playback mode
15/05/2009 15:30
0004.JPG
Show info
4
Auto info
After the same information as in Show info above is displayed for a few
(default setting) seconds, display will be the same as Hide info.
Hide info
15/05/2009 15:30
0004.JPG
Framing grid
90
f Date Imprint
Press d M z (setup menu) (A 83) M f Date imprint
Date and time are imprinted on pictures. Date can be printed from printers that do
not support the date imprinting (A 68).
Off (default setting)
Date and time are not imprinted on pictures.
Date
Date is imprinted on the bottom right corner of pictures taken while this option is in
effect.
Date and time
Date and time are imprinted on the bottom right corner of pictures taken while this
option is in effect.
At settings other than Off, the icon for the current setting is displayed in the
monitor (A 6).
Date imprint
Imprinted dates form a permanent part of image data and cannot be deleted.
Date imprint is disabled in the following situations.
- When the scene mode is set to Panorama assist.
- When movies are being recorded.
Dates imprinted at an Image mode setting (A 71) of TV screen (640) may be difficult to read.
Choose PC screen (1024) or larger when using date imprint.
The date is recorded using the format selected in the setup menus Date item (A 14, 86).
When pictures are printed from DPOF-compatible printers that can print date and photo
information, you can use Print Set (A 67) and print the shooting date and photo information on
the pictures. In such a case, it is unnecessary to imprint date and time on pictures beforehand using
Date Imprint.
91
U Motion detection
Press d M z (setup menu) (A 83) M U Motion detection
Set whether or not the camera automatically increases the shutter speed to
reduce blurring when motion is detected while shooting still pictures.
Auto (default setting)
When camera detects the movement of the subject or camera shake, the shutter
speed will be increased for reducing the blur.
However, motion detection is not active when the flash fires.
Motion detection does not function in the following scene modes regardless of
the setting.
When the scene mode is set to Night portrait (A 35), Dusk/dawn (A 36),
Fireworks show (A 38) or Backlight (A 39)
Off
Motion detection is not enabled.
Shooting, Playback and Setup Menus
The motion detection setting can be confirmed on the monitor during shooting
(when set to Off, nothing is displayed) (A 19).
When the camera detects shaking and increases shutter speed, the motion
detection indicator turns green.
Blurring caused by camera shake or subject movement may not be eliminated if there is excessive
shake or movement.
Motion detection may not function if camera shake or subject movement is excessive, or if there is
insufficient lighting.
The pictures taken may become somewhat grainy.
h AF Assist
Press d M z (setup menu) (A 83) M h AF assist
92
Disable this function. The camera may be unable to focus if lighting is poor.
i Sound Settings
Press d M z (setup menu) (A 83) M i Sound settings
93
k Auto Off
Press d M z (setup menu) (A 83) M k Auto off
When the camera is on and a period of time passes without any operations, the
camera will enter the standby mode (A 13) to save power.
Once in standby mode, the power lamp will blink, and if no operations are
performed for three minutes the camera turns off.
Use this option to set time before camera enters standby mode.
Auto off
Choose the time allowed to elapse before the camera enters standby mode if no
operations are performed from 30 s (default setting), 1 min, 5 min, and 30 min.
Sleep Mode
Shooting, Playback and Setup Menus
If On (default setting) is selected, the camera will enter standby mode when there
is no change in the brightness of the subject, even before the time selected in the
auto off menu has elapsed. The camera will enter sleep mode after 30 seconds
when Auto off is set to 1 min or less, or after 1 minute when Auto off is set to
5 min or more.
94
The time allowed to elapse before the camera enters standby mode is fixed in the following cases:
While menus are displayed: 3 minutes
While slide show is in progress: Up to 30 minutes
No
Format
Exit
Format card
All images will
be deleted! OK?
No
Format
Exit
Format memory
Formatting the internal memory or memory cards permanently deletes all data. Be sure to transfer
important pictures to a computer before formatting.
Do not turn the camera off or open the battery-chamber/memory card slot cover during
formatting.
The first time you insert the memory cards used in other devices into this camera, be sure to
format them using this camera.
95
n Language
Press d M z (setup menu) (A 83) M n Language
Czech
Polish
Danish
Portuguese
German
Russian
(default setting)
Finnish
Spanish
Swedish
Greek
Turkish
French
Arabic
Indonesian
Simplified Chinese
Italian
Traditional Chinese
Hungarian
Japanese
Dutch
Korean
Norwegian
Thai
o Video Mode
Press d M z (setup menu) (A 83) M o Video mode
Adjust settings for connection to a television. Choose from NTSC and PAL.
96
d Blink Warning
Press d M z (setup menu) (A 83) M d Blink warning
Set whether or not to detect human subjects with eyes closed when shooting
pictures in the face priority (A 22).
On (default setting)
When the camera detects that one or more human subjects have closed their eyes
shortly after recognizing the faces and shooting them, the Did someone blink?
screen will appear on the monitor. The face of the human subject that may have
closed his/her eyes is framed by a yellow border. In such a case, you can check the
shot picture and determine if you take the picture again. When using smile mode
(A 44), the "Did someone blink?" screen is not displayed regardless of the blink
warning setting.
Off
Use
g(i)
Switch to full-frame
playback
f(h)
Exit
Description
Press g (i).
Press f (h).
If the camera detects more than one human
subjects with their eyes closed, press
HIJK during the enlarged display to
switch over the face displayed.
Press l.
k
Switch to shooting
mode
97
p Reset All
Press d M z (setup menu) (A 83) M p Reset all
When Reset is selected, the cameras settings will be restored to their default
values.
Pop-up Menu
Option
Flash mode (A 28)
Default value
Auto
Self-timer (A 30)
Off
Off
0.0
Scene mode
Shooting, Playback and Setup Menus
Option
Scene mode (A 33)
Portrait
Movie Menu
Option
Movie options (A 54)
Default value
TV movie 640P
Shooting Menu
Option
Image mode (A 71)
Default value
L20: i Normal
L19: R Normal
Auto
Continuous (A 75)
Single
98
Default value
Standard color
Setup Menu
Option
Menus (A 84)
Default value
Text
Disable welcome
Auto info
On
3
Off
Auto
AF assist (A 92)
Auto
On
On
30 s
On
On
Others
Option
Paper size (A 63, 64)
Default value
Default
Choosing Reset all also clears the current file number (A 105) from the
memory. Numbering will continue from the lowest number available. To reset
file numbering to 0001, delete all pictures (A 81) before selecting Reset all.
The following settings in the menus will remain unaffected even if Reset all is
performed.
Shooting menu:
Preset manual in the White balance menu (A 74)
Setup menu:
Settings for picture registered for Welcome screen (A 85), Date (A 86),
Language (A 96), Video mode (A 96), and Battery type (A 100)
99
s Battery Type
Press d M z (setup menu) (A 83) M s Battery type
To ensure that the camera shows the correct battery level (A 18), choose the
type that matches the batteries currently in use.
Alkaline (default setting)
COOLPIX (Ni-MH)
Lithium
d Protect
Shooting, Playback and Setup Menus
100
f Rotate Image
Press d M z (setup menu) (A 83) M f Rotate image
Set the picture orientation (vertical or horizontal frame) displayed on the camera
monitor after the pictures are taken.
Pictures can be rotated 90 clockwise or counterclockwise.
Pictures that were recorded in the portrait (vertical) orientation can be rotated up
to 180 in either direction.
When the image is selected in the picture selection screen (A 79), the Rotate
image screen appears. Press the multi selector J or K to rotate the image 90.
Rotate image
Rotate
Rotate 90
counterclockwise
Back
Rotate image
Rotate
Back
Rotate
Rotate 90
clockwise
Press k to select the displayed direction and the vertical / horizontal position data
will be recorded on the picture.
Back
Rotate image
101
h Copy
Press d M z (setup menu) (A 83) M h Copy
Copy
Exit
Camera to card
Selected images
All images
JPEG- and AVI-format files can be copied. Files recorded in any other format cannot be copied.
Pictures taken with another make of camera or that have been modified on a computer cannot be
copied.
Edited copies have the same protection marking (A 100) as the original, but are not marked for
printing (A 67).
D
102
More Information
r Firmware Version
Press d M z (setup menu) (A 83) M r Firmware version
Back
Firmware version
103
Technical Notes
Optional Accessories
Rechargeable
battery
Battery charger
AC adapter
2
AV Cable
*1
Do not use any battery charger other than the MH-72 to recharge EN-MH2 batteries. Do
not use the MH-72 to charge any batteries other than EN-MH2 batteries.
SanDisk
TOSHIBA
Panasonic
Lexar
*1
*2
104
If the memory card will be used with a card reader or similar device, check that device
supports 2 GB cards.
SDHC-compliant. If the memory card will be used with a card reader or similar
device, check that device supports SDHC.
DSCN
Still pictures
.JPG
Cropped copies
RSCN
Movies
.AVI
Small copies
SSCN
D-Lighting copies
FSCN
File number (assigned automatically in
ascending order, starting with 0001)
Technical Notes
Files are stored in folders named with a folder number followed by a fivecharacter identifier: P_ plus a three-digit sequence number for pictures taken
using panorama assist (e.g. 101P_001; A 42) and NIKON for all other
pictures (e.g. 100NIKON). When the number of files within a folder reaches
9999, a new folder will be created. File numbers will be assigned automatically
starting with 0001.
Files copied using Copy > Selected images are copied to the current folder,
where they are assigned new file numbers in ascending order starting from the
largest file number in memory. Copy > All images copies all folders from the
source medium; file names do not change but new folder numbers are
assigned in ascending order, starting from the largest folder number on the
destination medium (A 102).
Folders can hold up to 200 pictures; if a picture is taken when the current folder
contains 200 pictures, a new folder will be created by adding one to the current
folder number. If a picture is taken when the current folder is numbered 999
and contains 200 pictures or a picture numbered 9999, no further pictures can
be taken until the medium is formatted (A 95) or a new memory card inserted.
105
Keep dry
Do not drop
Do not apply force to the lens, lens cover, monitor, memory card slot or battery chamber. These
parts are easily damaged. Applying force to the lens cover could result in camera malfunction or
damage to the lens. Should the monitor break, care should be taken to avoid injury caused by
broken glass and to prevent the liquid crystal from the display touching the skin or entering the eyes
or mouth.
Do not point the lens at strong light sources for extended periods
Avoid pointing the lens at the sun or other strong light sources for extended periods when using or
storing the camera. Intense light may cause deterioration of the image sensor, producing a white
blur effect in photographs.
Do not use or store this device in the vicinity of equipment that generates strong electromagnetic
radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment
such as radio transmitters could interfere with the monitor, damage data stored on the memory
card, or affect the products internal circuitry.
Technical Notes
Sudden changes in temperature, such as when entering or leaving a heated building on a cold day,
can cause condensation to form inside the device. To prevent condensation, place the device in a
carrying case or a plastic bag before exposing it to sudden changes in temperature.
Turn the product off before removing or disconnecting the power source
Do not remove the batteries while the product is on, or while images are being recorded or deleted.
Forcibly cutting power in these circumstances could result in loss of data or in damage to product
memory or internal circuitry.
106
The Battery
Check the battery level when taking the camera out, and replace the batteries if necessary (A 18).
If possible, carry spare batteries when taking pictures on important occasions.
When recharging rechargeable batteries, do not recharge batteries that contain a different
amount of charge, or batteries of different model numbers.
When charging EN-MH2 batteries, charge the batteries two at a time and use only Battery Charger
MH-72. Do not use any battery charger other than the MH-72 to recharge EN-MH2 batteries. Do
not use the MH-72 to charge any batteries other than EN-MH2 batteries.
Do not use any battery charger other than the MH-70/71 to recharge EN-MH1 batteries. Do not
use the MH-70/71 to charge any batteries other than EN-MH1 batteries. Set the Battery type
setting (A 100) to COOLPIX (Ni-MH).
Battery capacity tends to decrease on cold days. Be sure that the batteries are fresh before heading
outside to take pictures in cold weather. Keep spare batteries in a warm place and exchange as
necessary. Once warmed, a cold battery may recover some of its charge.
Dirt on the battery terminals can prevent the camera from functioning.
Used batteries are a valuable resource. Please recycle used batteries in accordance with local
regulations.
Technical Notes
107
Cleaning
Lens
Avoid touching glass parts with your fingers. Remove dust or lint with a blower
(typically a small device with a rubber bulb attached to one end that is
pumped to produce a stream of air out the other end). To remove fingerprints
or other stains that cannot be removed with a blower, wipe the lens with a soft
cloth, using a spiral motion that starts at the center of the lens and working
toward the edges. If this fails, clean the lens using a cloth lightly dampened
with commercial lens cleaner.
Monitor
Remove dust or lint with a blower. To remove fingerprints and other stains,
clean the monitor with a soft, dry cloth, being careful not to apply pressure.
Body
Use a blower to remove dust, dirt or sand, then wipe gently with a soft, dry
cloth. After using the camera at the beach or seaside, wipe off any sand or salt
with a dry cloth lightly dampened with fresh water, then dry thoroughly. Note
that foreign matter inside the camera could cause damage not covered by the
warranty.
Technical Notes
108
Storage
Turn the camera off when not in use. Check that the power-on lamp is off before
putting the camera away. Remove the batteries if the camera will not be used for
an extended period. Do not store the camera with naphtha or camphor moth
balls, or in any of the following locations:
Next to equipment that produces strong electromagnetic fields, such as
televisions or radios
Exposed to temperatures below 10 C (14 F) or above 50 C (122 F)
Poorly ventilated or subject to humidities of over 60 %
To prevent mold or mildew, take the camera out of storage at least once a month.
Turn the camera on and release the shutter a few times before putting the camera
away again.
The monitor may contain a few pixels that are always lit or that do not light. This is a characteristic
common to all TFT LCD displays, and does not indicate a malfunction. Images recorded using the
product will not be affected.
When framing bright subjects, vertical comet-like streaks that whiten toward either end may
appear in the display. This phenomenon, known as smear, does not indicate a malfunction.
In shooting modes other than movie mode, smear has no effect on the images that are recorded.
Images in the monitor may be difficult to see under bright lighting.
The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your
Nikon-authorized service representative.
Technical Notes
109
Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display
O(blinks)
Problem
Solution
Set clock.
Battery exhausted.
Replace batteries.
Refocus.
Use focus lock.
P
Please wait for the
camera to finish
recording.
23
N
Memory card is write
protected.
Write-protect switch is in
lock position.
17
P
This card cannot be
used.
104
16
P
Memory card has not been Choose Yes and press k to
Card is not formatted. formatted for use in
format card.
Format card?
COOLPIX L20/L19.
17
B
N
Battery exhausted.
Q(blinks red)
P
This card cannot be
read.
86
22, 23,
27
16
Technical Notes
No
Yes
N
110
71
24, 55,
81
16
17
Error Messages
Solution
95
16
95
81
49
N
Time out error while
Cannot record movie. recording movie.
16
N
Memory contains no
images.
102
Display
P
Image cannot be
saved.
N
Image cannot be
modified.
Problem
N
Picture is protected.
This image cannot be
deleted.
Disable protection.
N
Destination in same time
Travel destination is in zone as home.
the current time zone.
Lens error
Q
Lens error.
P
USB cable disconnected
Communications error during printing.
100
Technical Notes
N
File not created with
File contains no image COOLPIX L20/L19.
data.
51, 52,
71
86
18
62
111
Error Messages
Display
System error
Q
Problem
Solution
PR
Printer error: check
printer status.
PR
No paper is loaded in
printer.
Ink error.
Printer error:
check paper
PR
Printer error:
paper jam
PR
Printer error:
out of paper
PR
Printer error:
check ink
PR
Technical Notes
Printer error:
out of ink
PR
Printer error:
file corrupt
12, 18
* See the documentation provided with your printer for further guidance and
information.
112
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Refer to the page numbers in the right-most column for more information.
A
18
18
13, 22
29
58
56
89
108
18
94
107
14
86
89
14, 86
Technical Notes
Cause/Solution
Camera is off.
Battery exhausted.
Standby mode for saving power: press the
shutter-release button halfway.
When flash lamp blinks red, wait until flash has
charged.
Camera and computer are connected via USB
cable.
Camera and TV are connected via AV cable.
Monitor is hard to read
Adjust monitor brightness.
Monitor is dirty. Clean monitor.
Camera turns off without
Battery exhausted.
warning
Camera has turned off automatically to save
power.
Battery is cold.
Date and time of recording are Pictures taken while the clock is not set will
not correct
have a time stamp of 00/00/0000 00:00;
movies will be dated 01/ 01/2009 00:00. (The
Date not set indicator blinks during shooting
to indicate the clock is not set.) Set the correct
date and time using Date in the setup menu.
Check camera clock regularly against more
accurate timepieces and reset as required.
No indicators displayed in
Hide info is selected for Photo info.
monitor
Select Show info.
Date imprint not available
Camera clock has not been set.
Date not appearing on pictures Date imprint is disabled in the following
even when Date imprint is
situations.
enabled
When the scene mode is set to Panorama
assist
Movies
Camera settings reset
Backup battery is exhausted; all settings were
restored to their default values.
39
53
87
113
Troubleshooting
Shooting
Technical Notes
114
Problem
Cause/Solution
No picture taken when shutter- When camera is in playback mode, press the
release button is pressed.
shooting mode button.
When menus are displayed, press d.
Battery exhausted.
When flash lamp blinks, flash is charging.
Camera cannot focus.
The intended subject is one with which
autofocus does not perform well.
Set AF assist in the setup menu to Auto.
Focus error. Turn camera off and then on
again.
Pictures are blurred.
Use flash.
Use motion detection.
Use D (Best Shot Selector).
Use tripod and self-timer.
Bright specks appear in pictures Flash is reflecting off particles in air. Turn flash off.
taken with flash.
Flash does not fire.
Flash is off.
Some scene modes that cannot turn on flash
are selected.
D mode is selected.
Continuous or Multi-shot 16 or BSS is
selected for Continuous in shooting menu.
Optical zoom cannot be used. Optical zoom cannot be used while recording
movies.
A
8
10
18
29
23
92
18
28
92
75
5, 30
28
28
33
53
75
53
Troubleshooting
Problem
Digital zoom cannot be used.
34, 35
44
53
75
75
93
75
34, 38
53
4
92
34-39
108
73
28
28
20
28
32
28, 39
Technical Notes
Cause/Solution
Digital zoom cannot be used in the following
situations.
When Portrait or Night portrait is selected
for Scene mode.
When the smile mode is selected.
Just before recording a movie (up to 2 can be
applied while recording movies).
When Multi-shot 16 is selected for
Continuous.
Image mode not available.
Image mode cannot be adjusted when Multishot 16 is selected for Continuous.
No sound when shutter is
Off is selected for Sound settings > Shutter
released.
sound in setup menu.
Continuous or Multi-shot 16 or BSS is
selected for Continuous in shooting menu.
d (Sports scene mode) or l (Museum
scene mode) is selected.
D mode is selected.
Do not block the speaker.
AF-assist illuminator does not
Off is selected for AF assist option in camera
light.
setup menu.
AF-assist illuminator turns off automatically in
some scene modes.
Pictures appear smeared.
Lens is dirty. Clean lens.
Colors are unnatural.
White balance does not match light source.
Randomly spaced bright pixels The subject is dark, so shutter speed is too slow
(noise) appear in image.
or ISO sensitivity is too high. Noise can be
reduced by:
Using flash.
Pictures are too dark
Flash is off.
Flash window is blocked.
(underexposed).
Subject is beyond flash range.
Adjust exposure compensation.
Subject is backlit. Select o (Backlight scene
mode) or use fill flash.
Pictures are too bright
Adjust exposure compensation.
(overexposed).
32
115
Troubleshooting
Problem
Cause/Solution
When taking pictures with V (auto with redeye reduction), or when taking pictures with
Night portrait (either in easy auto mode or the
Night portrait scene mode) and the fill flash with
Unexpected results when flash slow sync and red-eye reduction is used, red-eye
set to V (auto with red-eye
reduction may be applied, in rare cases, to areas
reduction).
not affected by red-eye. Use any auto mode or
scene mode other than Night portrait, and
change the flash to any other settings other than
V (auto with red-eye reduction) and try
shooting again.
26, 28,
35
Playback
Problem
File cannot be played back.
Technical Notes
116
Cause/Solution
File was overwritten or renamed by computer or
other make of camera.
Cannot zoom in on picture.
Playback zoom cannot be used with movies,
small pictures, or pictures that have been
cropped to below 320 240.
Cannot use D-Lighting, crop, or These options cannot be used with movies.
small picture options.
These options cannot be used with pictures
taken when 16:9 is applied in the Image
mode setting.
Select picture that supports D-Lighting, crop,
or small picture.
Camera is unable to edit pictures taken with
other cameras.
Pictures edited by this camera may not be
displayed correctly in other cameras and
cannot be transferred to computers from
there.
Choose correct Video mode.
Pictures not displayed on
Memory card contains no pictures. Replace
television.
memory card. Remove memory card to play
back pictures from internal memory.
Nikon Transfer does not start
Camera is off.
when camera is connected.
Battery exhausted.
USB cable is not correctly connected.
Camera is not recognized by the computer.
Computer is not set to launch Nikon Transfer
automatically. For more information about
Nikon Transfer, refer to help information
contained in Nikon Transfer.
55
71
49
49
49
96
16
18
18
58
Troubleshooting
Problem
Pictures to be printed are not
displayed.
Cannot select paper size with
camera.
Cause/Solution
Memory card contains no pictures. Replace
memory card. Remove memory card to print
pictures from internal memory.
Even when using a PictBridge compatible
printer, paper size cannot be selected from the
camera in the following situations. Use the
printer to select paper size.
The printer does not support the paper sizes
used by the camera.
The printer automatically selects the paper
size.
A
16
63, 64
Technical Notes
117
Specifications
Nikon COOLPIX L20/COOLPIX L19 Digital Camera
Type
Effective pixels
Image sensor
COOLPIX L20:
1/2.3-in. CCD; total pixels: 10.34 million
COOLPIX L19:
1/2.5-in. CCD; total pixels: 8.29 million
Lens
Focal length
6.7-24.0mm
COOLPIX L20: Equivalent with 35mm [135] format picture
angle: 38-136mm
COOLPIX L19: Equivalent with 35mm [135] format picture
angle: 41-145mm
Aperture
f/3.1-6.7
Construction
7 elements in 6 groups
Digital zoom
Autofocus (AF)
Up to 4
COOLPIX L20: Equivalent with 35mm [135] format picture
angle: approx. 544mm
COOLPIX L19: Equivalent with 35mm [135] format picture
angle: approx. 580mm
Contrast-detect AF
Technical Notes
Focus-area selection
Monitor
Frame coverage
(shooting mode)
Frame coverage
(playback mode)
Storage
118
Media
File system
File formats
Specifications
Image size
(pixels)
COOLPIX L20:
3,648 2,736 [High (3648P) / Normal (3648)]
2,592 1,944 [Normal (2592)]
2,048 1,536 [Normal (2048)]
1,024 768 [PC screen (1024)]
640 480 [TV screen (640)]
3,584 2,016 [16:9 (3584)]
COOLPIX L19:
3,264 2,448 [High (3264P) / Normal (3264)]
2,592 1,944 [Normal (2592)]
2,048 1,536 [Normal (2048)]
1,024 768 [PC screen (1024)]
640 480 [TV screen (640)]
3,200 1,800 [16:9 (3200)]
Exposure
Metering
Exposure control
Shutter
Speed
Aperture
Self-timer
Built-in flash
Range
[W]: 0.5 to 7.0 m (1 ft. 8 in. to 22 ft.), [T]: 0.5 to 4.0 m (1 ft. 8 in. to
13 ft.)
Flash control
Technical Notes
Range
119
Specifications
Interface
Data transfer protocol
Hi-Speed USB
MTP, PTP
Video output
I/O terminal
Supported languages
Power sources
Number of Exposures
Possible (Battery life)*
Dimensions (W H D)
Weight
Operating environment
0 to 40C (32 to 104F)
Humidity
Technical Notes
Unless otherwise stated, all figures are for a camera with a fully-charged EN-MH2
batteries operated at an ambient temperature of 23 (2) C (69 to 77F).
* Based on Camera and Imaging Products Association (CIPA) standards for measuring the life
of camera batteries. Measured at 25C (77F); zoom adjusted with each shot, flash fired with
every other shot, image mode set to [COOLPIX L20: i Normal /COOLPIX L19: R Normal].
Battery life may vary depending on shooting interval and length of time menus and
images are displayed. Supplied batteries are for trial use only.
B
120
Operating
temperature
Specifications
Nikon will not be held liable for any errors this manual may contain.
The appearance of this product and its specifications are subject to change without notice.
Specifications
Supported Standards
DCF: Design Rule for Camera File System is a standard widely used in the digital
camera industry to ensure compatibility among different makes of camera.
DPOF: Digital Print Order Format is an industry-wide standard that allows
pictures to be printed from print orders stored on the memory card.
Exif version 2.2: This camera supports Exif (Exchangeable Image File Format
for Digital Still Cameras) version 2.2, a standard that allows information stored
with photographs to be used for optimal color reproduction when images are
output from Exif-compliant printers.
PictBridge: A standard developed cooperatively by the digital camera and
printer industries, allowing photographs to be output directly to a printer
without connecting the camera to a computer.
Technical Notes
121
Index
Symbols
c (Playback) button 5
l (delete) button 25
d button 5, 10
k (apply selection) button 5, 9
A Auto mode 27
l Delete button 5, 24, 55
G Easy auto mode 26, 18
m Flash mode 28
p Macro mode 31
c Playback mode 24
n Self-timer 30
R 43
f button 5, 21, 25, 46, 47, 48
h button 5, 21, 25, 46, 47, 48
g button 5, 11, 21, 25, 46, 47, 48
i button 5, 21, 25, 46, 47, 48
j button 5, 11
c D-Lighting 50
a Smile mode 44
D Movie mode 53
o Exposure compensation 32
C Scene mode 33
Technical Notes
A
AC adapter 13, 104
AF-assist illumination 4, 23, 92
Alkaline 13
Alkaline batteries 12
Aperture 22
Audio Video/USB Cable 56, 62
Audio-in/Video-in jack 56
Auto flash 28
Auto off 13, 94
Autofocus 22, 31
AV Cable 56
AVI 105
B
Backlight o 39
122
Batteries 12, 87
Battery level 18
Battery type 13, 100
Battery-chamber 5
Battery-chamber/memory card slot cover
5, 12, 16
Beach/snow g 36
Best Shot Selector 75
Black-and-white 76
Blink warning 97
Brightness 89
BSS 75
Built-in flash 4, 28
Built-in microphone 4
Button sound 93
C
Cable connector 4, 56, 57, 62
Calendar display 47
Close-up k 37
Cloudy 73
Color options 76
Compression ratio 71
Computer 57
Continuous 75
Copy n 39
Copying pictures 102
Crop 51
Cyanotype 76
D
Date 14, 86
Date imprint 91
Daylight 73
Daylight saving time 14, 87
Delete 24, 25, 55, 81
Digital zoom 21
Direct print 61
D-Lighting 49, 50
DPOF 121
DPOF printing 66
Index
DSCN 105
Dusk/dawn i 36
Internal memory 16
ISO sensitivity 29
JPG 105
Macro mode 31
Memory capacity 18
Memory card 16, 104
Memory card slot 5, 16
Menus 84
Monitor 5, 6, 108
Monitor settings 89
Motion detection 92
Movie menu 53, 54
Movie playback 55
Movie settings 54
Multi selector 5, 9
Multi-shot 16 75
Museum l 38
L
Landscape c 34
Language 96
Lens 4, 118
Lithium batteries 12
Halfway 11
Help 11
Identifier 105
Image mode 19, 33, 71
Image review 89
Incandescent 73
Indicator lamp 5
Optical zoom 21
Optional Accessories 104
Technical Notes
P
Panorama assist p 39, 42
123
Index
Paper size 63, 64
Party/indoor f 35
Photo info 89
PictBridge 61, 121
Playback 24, 25, 46, 48, 55
Playback button 5, 8
Playback menu 78
Playback zoom 48
Portrait b 34
Power 12, 14, 18
Power switch 4, 12, 18
Power-on lamp 4, 12, 18
Preset manual 74
Print 63, 64, 67
Print set 67
Print Set (Date) 68
Printer 61
Protect 100
Technical Notes
124
Recording movies 53
Red-eye reduction 28, 29
Reset all 98
Rotate image 101
RSCN 105
S
Scene mode 33, 34
Self-timer 30
Self-timer lamp 4, 30
Sepia 76
Setup menu 82
Shooting 18, 20, 22
Shooting Menu 69
Shooting mode button 5, 8
Shooting-mode Selection menu 8
Shutter sound 93
Shutter speed 22
Shutter-release button 4, 22
Single 75
Sleep Mode 94
Slide show 80
Slow Sync 28
Small picture 52
Smile mode 44
Sound settings 93
Speaker 4
Sports d 34
SSCN 105
Standard color 76
Strap 11
Sunset h 36
T
Tabs 10
The c (Playback) Button 8
Thumbnail playback 46
Time zone 14, 86, 88
Tripod socket 5
TV 56
TV movie 54
U
USB Cable 57, 58
V
Video Mode 96
Vivid color 76
Volume 55
W
Welcome screen 85
White balance 73
Z
Zoom button 5, 21, 55
125
126
Printed in Europe
CT8L01(11)
6MM64611-01