SC11U
SC11U
SC11U
,
4 Crystal House, 235, Navi Peth
Off LBS Road, Pune 411 030, India
Phone : 91-20- 24320023, 24334423, 65001587
email : info@santelequip.com
Specification
USB 1.0, 1.2 & 2.0. 12Mbps
Serial Ports: Auto Detect
RS232 signal: Rx, Tx, Gnd, CTS, RTS, DSR, DTR
RS422 signal: Differential 4 full-duplex wires.
RS485 signal: Differential 2 half-duplex wires.
Built in Terminal 100 Ohm Terminal resistor SW selection ON/OFF
Serial Parameters :
Parity : None, Odd, Even, Mark, Space.
Data bits: 5,6,7,8.
Stop bits: 1, 1.5, 2.
Flow Control
: Xon / Xoff or Hardware
Communication Speed: From 300bps to 921kbps for RS232 & 320kbps for RS485, Auto switching.
Surge Protection on RS422/485 lines.
Distance: Up to 4000ft (1250M)
Cable : USB Type A to Type B
Connection type: Screw terminal.
Signals LED: Power on TX, RX.
Isolation Voltage: 3000V DC
ESD Protection : 15KV on all signals
Surge Protection : 600W on all 485/422 lines
Operating environment: 0 to 60 C
Storage temperature: -20 to 70 C
Dimension: 88mm X 91mm X 27mm
Weight: 95g
Power Supply
: USB Port
OS supported: Windows 98/ME/2000/XP/2003 Server/Vista, Linux, Mac.
LED Indicators
SYS (Red) : Power,
RX (Orange)
: Data received indicator
TX (Green)
: Data sent indicator
RS232 Connections.
RS 485 Connections :
RS 422 Connections :
4. Choose ACCEPT
7. Finish
1. Go to C:\SiLabs\MCU\CP210x\Windows
2. Run CP210xVCPInstaller
3. Install
4.
5.
9. Check for a new Com port in COM/LPT1 section, CP210 USB to UART Bridge.
..