IMPACT Precast Software
IMPACT Precast Software
IMPACT Precast Software
Key benefits
A large world-wide customer base of precast factories and consultants using IMPACT
Precast.
Many consultants are using IMPACT Precast, and this increases the possibilities to work
together. StruSoft has established its own engineering and service company in 2011
StruEngineers in Pune in India. See www.struengineers.com. StruEngineers uses IMPACT
Precast in real customer projects.
StruSoft has experienced technical support at StruSofts company (StruSoft FZE) in the
U.A.E., at our branch office (Strusoft UK) in London, United Kingdom and at our Head Office
in Malmo, Sweden.
IMPACT Precast is built on AutoCAD and Revit Structure, which is almost de facto standard
within the building industry.
Technical Features
The
IMPACT Precast has an Open Database, it is easy to integrate IMPACT Precast to other
systems.
o
The IMPACT server is easy to install and is built on Microsoft SQL Server.
Multi user system, several users can work on the same project.
o
The users can share the whole or part of the projects elements, components,
drawings, etc. between each other. This is mandatory to be able to exchange
information on the same project between consultants, and precast factories.
For each project it is possible to select how the element marking shall be done. The
elements ID is unique and is automatically set by the system. This is important when
integrating IMPACT Precast to Planning Software.
A Revit Structure model can be imported and synchronized with the IMPACT Precast
model. Information on floor, elevation and production drawings are automatically
updated if anything has been changed in the model.
In Project Manager, a full view of the project from early design to delivery and
assembly is given. The DWG-Viewer shows the 3D-model and shop drawings.
Properties for each element can be viewed and material lists can be generated for
each building, floor, and assembly sequence. Reports and drawing can be generated
for approval.
The Project Manager has an general interface to ERP-system, which is easy to configure.
The interface to robots and machines are based on Unitechnik standard formats.
By using IMPACT Precast, the design time is reduced a lot compared to using
standard AutoCAD. This leads to that lead-time is reduced as well and increased
quality of produced elements. IMPACT Precast generates all shop drawings
automatically including dimensions and control of changes.
FEM-Design can import an IMPACT Precast model for analysis and design.
Analysis and design of Hollow Core elements can be done with PRE-Stress which is
fully integrated to IMPACT Precast.
IMPACT Precast can handle both small and big projects (models).
Easy to use.
o
IMPACT Precast is easy to use and is built on the most common software in the
building industry, AutoCAD and Revit Structure.