VAG Manual
VAG Manual
VAG Manual
VW
AUDI
SEAT
SKODA
VW-AUDI-SEAT-SKODA MAN-
CONTENTS
APPLICATIONS
GENERAL OPERATION
FAULT CODE OPERATION
SPECIAL FUNCTIONS
TIPS & HINTS
REMOTE CONTROL PROGRAMMING
33
APPLICATIONS
VEHICLE
IMM
IMM + INSTR
YEAR
CABLE
AUDI
A2
ALL MODELS
ADC110-B
A3/A4
ALL MODELS
ADC110-B
A6
< 96
ADC112
> 96
ADC110-B
< 96
ADC112
> 96
ADC110-B
< 97
ADC112
< 97
ADC112
ALL MODELS
ADC110-B
ALL MODELS
ADC110-B
ALL MODELS
ADC110-B
A6
A8
A8
COUPE
80/90
TT
SEAT
ALHAMBRA
AROSA
ALTEA
ALL MODELS
ADC110-B
CORDOBA
ALL MODELS
ADC110-B
IBIZA
ALL MODELS
ADC110-B
INCA
ALL MODELS
ADC110-B
LEON
ALL MODELS
ADC110-B
TOLEDO
< 97
ADC112
TOLEDO
> 98
ADC110-B
ALL MODELS
ADC110-B
ALL MODELS
ADC110-B
ALL MODELS
ADC110-B
ALL MODELS
ADC110-B
BORA
ALL MODELS
ADC110-B
LUPO
ALL MODELS
ADC110-B
CADDY
ALL MODELS
ADC110-B
GOLF
< 95
ADC112
SKODA
OCTAVIA
FABIA
FELICIA
SUPERB
VW
GOLF
> 95
ADC110-B
PASSAT
ALL MODELS
ADC110-B
NEW BEETLE
ALL MODELS
ADC110-B
PHAETON
ALL MODELS
ADC110-B
ALL MODELS
ADC110-B
ALL MODELS
ADC110-B
ALL MODELS
ADC110-B
ALL MODELS
ADC110-B
ALL MODELS
ADC110-B
POLO
SHARAN
TRANSPORTER
TOURAN
VENTO
VEHICLE
CAN SYSTEM
INFORMATION
YEAR
CABLE
AUDI
NEW A3
8P CHASSIS
2005 >
ADC110-B
NEW A4
8E CHASSIS
2005 >
ADC110-B
NEW A6
2005 >
ADC110-B
NEW A8
2005>
ADC110-B
2005 >
ADC110-B
2005 >
ADC110-B
4E CHASSIS
SEAT
NEW ALTEA
SKODA
NEW OCTAVIA
VW
33
GOLF 5
1K CHASSIS
2005 >
ADC110-B
TOURAN
1T CHASSIS
2005 >
ADC110-B
NEW CADDY
2K CHASSIS
2005 >
ADC110-B
GENERAL OPERATION
SYSTEM DESCRIPTION
The VAG group immobiliser system consists of an immobiliser ECU which
controls the recognition of keys and the Engine Management ECU system.
The Immobiliser ECU enables up to 8 keys to be programmed and are
recognised via the transponder aerial mounted around the Ignition lock.
If the keys are lost or a replacement Engine Management ECU is fitted then the
transponder keys will need programming so that the ECU memories recognise
the codes.
PASS CODE
The pass codes are now being refused by VW and AUDI dealers which is causing
major issues for customers and other diagnostic users. If you do get a 7 digit
code, this can be converted using the FREE 7 to 4 digit converter on our web
site.
If you have Pin code extraction software, you may also be able to read the 4
digit code from the ECU memory, further work and development on this is on an
ongoing basis.
SYSTEM IDENTIFICATION
To identify the correct system, check to see whether the Dashboard has the
following symbol when the ignition is on :
33
ECU IDENTIFICATION
FAULT CODES
SPECIAL FUNCTIONS
NO FAULTS FOUND
33
PROCEDURE COMPLETE
33
SPECIAL FUNCTIONS
PROGRAMMING KEYS
ECU IDENTIFICATION
SYSTEM 1
> SYSTEM 2
PLEASE WAIT
TRYING TO COMMUNICATE
ECU IDENTIFICATION
IMMO-IDENTNR
: VWZ720W049
5589
ECU IDENTIFICATION
FAULT CODES
SPECIAL FUNCTIONS
PROGRAM KEYS
KEYS PROGRAMMED
33
SPECIAL FUNCTIONS
SECURITY CODE
____
SECURITY CODE
1234
IS THIS CORRECT
PLEASE WAIT
TRYING TO COMMUNICATE
KEYS PROGRAMMED : 3
TOTAL KEYS REQUIRED :
PROGRAMMING KEYS
TOTAL KEYS REQUIRED : 3
PLEASE PROGRAM
ADDITIONAL KEYS
33
SPECIAL FUNCTIONS
PROGRAMMING ADDITIONAL KEYS (Contd)
Procedure
1. The Key already in the ignition will now be programmed, ie. Key 1
2. Remove Key 1.
3. Insert Key 2 and turn ignition on. for 2 seconds. Then remove key
4. Insert Key 3 and turn ignition on. for 2 seconds. Then remove key
5. Repeat for all keys.
6. Try all the keys to ensure they work.
7. Check for any fault codes that may have been set, and clear the
memory.
NOTE : The maximum number of keys that can be programmed is 4.
33
SPECIAL FUNCTIONS
PROGRAMMING KEYS (CAN BUS SYSTEMS)
ECU IDENTIFICATION
To select VAG CAN bus systems, select Immobiliser from main menu.
IMMOBILISER
PLIP FUNCTIONS
AUTO GEARBOX
PROGRAM ECU
PIN CODE READING
SYSTEM 1
SYSTEM 2
VAG CAN
SWITCH IGNITION ON
PLEASE WAIT
TRYING TO COMMUNICATE
ECU IDENTIFICATION
If OK, the ECU identification will be displayed.
ID : 1K0 920 972 B
33
SPECIAL FUNCTIONS
PROGRAMMING KEYS (CAN BUS SYSTEMS)
DIAGNOSTIC MENU
SECURITY ACCESS
ERASE KEYS
KEY PROGRAMMING
KEY COUNT
____
SECURITY CODE
1234
IS THIS CORRECT
OK=ENTER CLEAR=BACK
SECURITY ACCESS
ACCESS GRANTED
OTHER FUNCTIONS
ERASE KEYS = Will erase ALL Keys
KEY COUNT = Will display number of keys programmed.
33
SPECIAL FUNCTIONS
PROGRAMMING KEYS (CAN BUS SYSTEMS)
DIAGNOSTIC MENU
SECURITY ACCESS
ERASE KEYS
KEY PROGRAMMING
KEY COUNT
NUMBER OF KEYS
OK=ENTER CLEAR=BACK
PLEASE WAIT
PROCEDURE COMPLETE
PLEASE CYCLE ADDITIONAL
KEYS
If all OK, the key in the ignition will be programmed and additional keys need to be cycled
in the ignition to program.
33
SPECIAL FUNCTIONS
PIN CODE READING
33
SPECIAL FUNCTIONS
ECU CODING
VEHICLE SELECTION
> SYSTEM 1
> SYSTEM 2
PLEASE WAIT
TRYING TO COMMUNICATE
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
SPECIAL FUNCTIONS
PRESS ENTER KEY
ECU IDENTIFICATION
33
SPECIAL FUNCTIONS
SECURITY CODE
1234
IS THIS CORRECT
OK=ENTER CLEAR=BACK
RECODE ECU/IMMO
SUCCESSFUL
PLEASE TURN OFF
IGNITION FOR 15 SECS
You will be asked to enter the 4 digit security code to enable Program ECU.
SYSTEM 1
Goes straight into learning process as no
vehicle selection needed. User will see
text READING ECU DATA and SAVING
ECU DATA FLASH on screen as process
is carried out. If successful this screen is
displayed.
RECODE ECU/IMMO
FAILED
RECODE ECU/IMMO
FAILED
PRESS ENTER KEY
33
When reading Pin codes from vehicle memory, if loss of communications is experienced, try reading fault codes, then clearing
fault codes then read the pin code.
If when programming keys, the tester displays the following :
5.
This means that the PIN CODE has been entered incorrectly
more than three times, and the system will need resetting by
leaving the ignition ON for 35 minutes.
PIN code reading cannot be immediately followed by coding a
key. You must first disconnect the tester and turn ignition on
first.
Immobiliser warning light on all the time (engine starts and
runs) - a correct security code has been entered but the session
has not been closed by programming the keys.
EMERGENCY START
1.
2.
3.
4.
Switch IGNITION ON and turn the clock set button to the right
and at the same time press and hold the trip reset button for 1
second.
0000 appears on the display, press the trip button to input the
first digit of the pin code. Turn the clock set button to the right
to move to the next digit. Repeat for all 4 digits.
Then with the correct pin code entered turn the clock set button
to the right and press the trip reset button for 1 second.
The Immobiliser light will stay on, and the car can run for 45
minutes.
33
33
33
33
Procedure
1. Open the car using the drivers door.
2. Press the remote control unlock button once.
3. Put the key into the ignition and switch on.
4. Switch ignition off and remove the key.
5. Press a button on the remote control.
6. Procedure Complete