MCR22-6, MCR22-8 Sensitive Gate Silicon Controlled Rectifiers
MCR22-6, MCR22-8 Sensitive Gate Silicon Controlled Rectifiers
MCR22-6, MCR22-8 Sensitive Gate Silicon Controlled Rectifiers
Preferred Device
Sensitive Gate
Silicon Controlled Rectifiers
Reverse Blocking Thyristors
http://onsemi.com
Features
SCRs
1.5 AMPERES RMS
400 thru 600 VOLTS
G
A
Symbol
VDRM,
VRRM
IT(RMS)
Value
Unit
V
400
600
1.5
ITSM
15
I2t
0.9
A2s
PGM
0.5
PG(AV)
0.1
IFGM
0.2
VRGM
5.0
TJ
40 to +110
Tstg
40 to +150
Symbol
Max
Unit
3
STRAIGHT LEAD
BULK PACK TO92 (TO226)
CASE 029
STYLE 10
RqJC
50
C/W
RqJA
160
C/W
TL
+260
3
BENT LEAD
TAPE & REEL
AMMO PACK
MARKING DIAGRAMS
MCR
22x
AYWW G
G
THERMAL CHARACTERISTICS
Characteristic
12
PIN ASSIGNMENT
1
Cathode
Gate
Anode
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
MCR226, MCR228
ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted.)
Characteristic
Symbol
Min
Typ
Max
Unit
10
200
mA
mA
VTM
1.2
1.7
OFF CHARACTERISTICS
Peak Repetitive Forward or Reverse Blocking Current
(VAK = Rated VDRM or VRRM; RGK = 1 kW)
TC = 25C
TC = 110C
IDRM, IRRM
ON CHARACTERISTICS
Peak Forward OnState Voltage (Note 2)
(ITM = 1 A Peak)
Gate Trigger Current (Continuous dc) (Note 3)
(VAK = 6 Vdc, RL = 100 W)
TC = 25C
TC = 40C
IGT
30
200
500
mA
TC = 25C
TC = 40C
VGT
0.8
1.2
TC = 110C
VGD
0.1
Holding Current
(VAK = 12 Vdc, RGK = 1kW)
Initiating Current = 20 mA
TC = 25C
TC = 40C
2.0
5.0
10
25
IH
mA
DYNAMIC CHARACTERISTICS
dv/dt
V/ms
Symbol
Parameter
Anode +
VTM
VDRM
IDRM
VRRM
IRRM
VTM
IH
Holding Current
on state
IRRM at VRRM
http://onsemi.com
2
IH
+ Voltage
IDRM at VDRM
Forward Blocking Region
(off state)
MCR226, MCR228
CURRENT DERATING
140
100
= 180
= CONDUCTION
ANGLE
60
dc
20
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
120
100
80
60
dc
40
= 180
= CONDUCTION ANGLE
20
0
0
0.2
0.4
3.0
TJ = 110C
25C
1.0
0.7
0.5
0.3
0.2
0.1
0.07
0.05
0.03
0.02
0.01
0
0.5
0.8
5.0
2.0
0.6
140
1.0
1.5
2.0
http://onsemi.com
3
2.5
1.0
1.0
0.7
0.5
0.3
0.2
0.1
0.07
0.05
0.03
0.02
0.01
0.1
0.2
0.5
1.0
2.0
5.0
10
20
50
100
200
500
1000
2000
5000
10000
t, TIME (ms)
TYPICAL CHARACTERISTICS
100
I GT GATE TRIGGER CURRENT ( A)
VAK = 7.0 V
RL = 100
0.7
0.6
0.5
0.4
0.3
-75
-50
-25
25
50
100 110
75
50
30
20
10
5.0
3.0
2.0
1.0
-40
-20
20
40
60
80
100 110
0.8
2.0
10
1.8
MCR226, MCR228
1.6
VAK = 12 V
RL = 100 W
30
1.4
5.0
60
90
120
180
1.2
1.0
dc
0.8
0.6
2.0
0.4
0.2
1.0
-40
-20
20
40
60
80
100 110
0
0
0.2
0.4
0.6
0.8
1.0
1.2
http://onsemi.com
4
1.4
1.6
MCR226, MCR228
TO92 EIA RADIAL TAPE IN FAN FOLD BOX OR ON REEL
H2A
H2A
H2B
H2B
H
W2
H4 H5
T1
L1
H1
W1 W
T
T2
F1
F2
P2
P2
P1
Millimeter
Symbol
Min
Max
Min
Max
0.1496
0.1653
3.8
4.2
D2
0.015
0.020
0.38
0.51
F1, F2
0.0945
0.110
2.4
2.8
.059
.156
1.5
4.0
Feedhole Location
H1
0.3346
0.3741
8.5
9.5
H2A
0.039
1.0
H2B
0.051
1.0
H4
0.7086
0.768
18
19.5
H5
0.610
0.649
15.5
16.5
0.3346
0.433
8.5
11
L1
0.09842
2.5
Feedhole Pitch
0.4921
0.5079
12.5
12.9
P1
0.2342
0.2658
5.95
6.75
P2
0.1397
0.1556
3.55
3.95
0.06
0.08
0.15
0.20
T1
0.0567
1.44
T2
0.014
0.027
0.35
0.65
0.6889
0.7481
17.5
19
W1
0.2165
0.2841
5.5
6.3
W2
.0059
0.01968
.15
0.5
NOTES:
1. Maximum alignment deviation between leads not to be greater than 0.2 mm.
2. Defective components shall be clipped from the carrier tape such that the remaining protrusion (L) does not exceed a maximum of 11 mm.
3. Component lead to tape adhesion must meet the pull test requirements.
4. Maximum noncumulative variation between tape feed holes shall not exceed 1 mm in 20 pitches.
5. Holddown tape not to extend beyond the edge(s) of carrier tape and there shall be no exposure of adhesive.
6. No more than 1 consecutive missing component is permitted.
7. A tape trailer and leader, having at least three feed holes is required before the first and after the last component.
8. Splices will not interfere with the sprocket feed holes.
http://onsemi.com
5
MCR226, MCR228
ORDERING & SHIPPING INFORMATION: MCR22 Series Packaging Options, Device Suffix
U.S.
Europe
Equivalent
MCR228RL1
MCR228RL1G
Shipping
2000 / Tape & Reel
MCR226
MCR226G
MCR228
N/A, Bulk
MCR228G
MCR226RLRA
MCR226RLRAG
MCR226RLRP
MCR226RLRPG
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
6
MCR226, MCR228
PACKAGE DIMENSIONS
TO92 (TO226)
CASE 2911
ISSUE AM
A
STRAIGHT LEAD
BULK PACK
R
P
L
SEATING
PLANE
X X
G
J
H
V
C
SECTION XX
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
BEYOND DIMENSION K MINIMUM.
DIM
A
B
C
D
G
H
J
K
L
N
P
R
V
INCHES
MIN
MAX
0.175
0.205
0.170
0.210
0.125
0.165
0.016
0.021
0.045
0.055
0.095
0.105
0.015
0.020
0.500
--0.250
--0.080
0.105
--0.100
0.115
--0.135
---
MILLIMETERS
MIN
MAX
4.45
5.20
4.32
5.33
3.18
4.19
0.407
0.533
1.15
1.39
2.42
2.66
0.39
0.50
12.70
--6.35
--2.04
2.66
--2.54
2.93
--3.43
---
BENT LEAD
TAPE & REEL
AMMO PACK
P
T
SEATING
PLANE
X X
J
V
1
C
N
SECTION XX
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. CONTOUR OF PACKAGE BEYOND
DIMENSION R IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P
AND BEYOND DIMENSION K MINIMUM.
DIM
A
B
C
D
G
J
K
N
P
R
V
MILLIMETERS
MIN
MAX
4.45
5.20
4.32
5.33
3.18
4.19
0.40
0.54
2.40
2.80
0.39
0.50
12.70
--2.04
2.66
1.50
4.00
2.93
--3.43
---
STYLE 10:
PIN 1. CATHODE
2. GATE
3. ANODE
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including Typicals must be validated for each customer application by customers technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com
7
MCR226/D