SR1002 Optical Receiver
SR1002 Optical Receiver
SR1002 Optical Receiver
SR1002 is our latest high-class CATV network optical receiver. This equipment adopts
GaAs MMIC amplify module. Optimization circuit design, coupled with the company 10
years professional design experience, makes the equipment achieve high performance
index. The parameters will be displayed by single-chip to make engineering debug be
more convenient. It is the best choice for CATV network.
. Performance Characteristics
Advanced AGC control technique, when the input optical power range is 9
2dBm, the output lever, CTB and CSO basically unchanged ; the AGC control range is
adjustable;
Downlink working frequency extended to 1 GHz, RF amplifier part adopts the high
performance and low power consumption GaAs chip, the highest output level up to
106 dBuv;
EQ and ATT both use the professional electric control circuit, makes the control more
accurate, operation more convenient;
Built-in national standard class II network management transponder, supports remote
network management (optional);
Compact structure, convenient installation, is the first choice of FTTB CATV network
equipment;
Built-in power supply with high reliability and Low power consumption;
. Technical Parameter
Item
Unit
Technical Parameter
Optical
Model
Parameter
SR1002
Receive Optical
Power
dBm
-9 ~ +2
dB
>45
Optical Receiving
Wavelength
nm
1100 ~ 1600
Connector Type
Fiber Type
Single Mode
Link
Parameter
C/N
dB
51
C/CTB
dB
60
C/CSO
dB
60
dBV
42-channel signal source input,
-2dBm optical power received
RF
Parameter
Frequency Range
MHz
45 ~1000
Flatness in Band
dB
0.75
Rated Output
Level
dBV
108
dBV
Output Return
Loss
dB
16
Output
Impedance
75
Optical AGC-9dBm+2dBm
110
Optical AGC-7dBm+2dBm
114
Optical AGC
range
adjustable
Electrical control
EQ range
dB
015
Electrical control
ATT range
dBV
015
Generic
characteristic
Power Voltage
AC150~265V
Operating
Temperature
-40~60
Consumption
VA
Dimension
mm
. Block Diagram
.Product Picture
or
EQ mode, means that the controlled and displayed data is the RF channel
equilibrium
RF attenuation, can be adjusted by
or
ATT mode, means that the controlled and displayed data is the RF channel
attenuation
The actual number of channels enters into the current network system. It can be
adjusted by the
or
This menu is used to display the actual number of channels enters into the current
network system, in order to calculate the RF output level more accurately
RF output level of the equipment (unit dBuV)
: Means that the displayed data is the RF output level of the equipment under the
current system
Operating temperature (unit )
Displays the actual internal working environmental temperature
or
Means that the AGC range of the equipment under the current system is +2
If the
-9dBm
displayed data is -4, means that the AGC range is +2-4dBm
If the displayed data is -5, means that the AGC range is +2-5dBm
If the displayed data is -6, means that the AGC range is +2-6dBm
If the displayed data is -7, means that the AGC range is +2-7dBm
If the displayed data is -8, means that the AGC range is +2-8dBm
Note: AGC range per reduce 1dBm, the output level is raised by 2 dBuV