Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 146 views

    STI 1210A Instruction Manual

    Uploaded by

    JMAC Supply
    Buy the STI 1210A at JMAC Supply. https://www.jmac.com/STI_1210A_p/sti-1210a.htm?=scribd

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    STI 1210A Instruction Manual

    Uploaded by

    JMAC Supply
    146 views2 pages
    Buy the STI 1210A at JMAC Supply. https://www.jmac.com/STI_1210A_p/sti-1210a.htm?=scribd

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Buy the STI 1210A at JMAC Supply. https://www.jmac.com/STI_1210A_p/sti-1210a.htm?=scribd

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    146 views2 pages

    STI 1210A Instruction Manual

    Uploaded by

    JMAC Supply
    Buy the STI 1210A at JMAC Supply. https://www.jmac.com/STI_1210A_p/sti-1210a.htm?=scribd

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    NEOPRENE GASKET

    Safety

    HEIGHT
    Technology
    International,
    7.75 in.(197mm)

    Inc.

    Safety Technology International (Europe) Ltd.

    Unit 49G Pipers Road Park Farm Industrial Estate CRedditch


    Worcestershire B98 0HU England
    Tel: 44 (0) 1527 520 999 Fax: 44 (0) 1527 501 999D
    E-mail: info@sti-europe.com Web: www.sti-europe.com

    2306 Airport Road Waterford, Michigan 48327-1209


    Phone: 248-673-9898 Fax: 248-673-1246
    Toll Free: 800-888-4784 E-mail: info@sti-usa.com
    Web: www.sti-usa.com

    DEPTH
    6.5 in.(165mm)

    06297A BACKBOX
    06297T MOUNTING
    TABS (4) PROVIDED

    E
    A

    WIDTH
    DRILL FOR CONDUIT ENTRY
    5.25 in.(133mm)
    3 3/8 in.
    3/4 in.(44mm)
    (86mm)

    HEIGHT
    7.75 in.(197mm)

    #8-32 x 3/8 in.


    MACHINE SCREWS
    (NOT INCLUDED)
    DEPTH
    6.5 in.(165mm)

    NEOPRENE GASKET
    629763 STANDOFF BLOCKS
    (4) PROVIDED

    B
    C

    WIDTH
    5.25 in.(133mm)

    19033 ANCHOR
    (4) PROVIDED

    19013 SCREW
    #10 x 1 1/2 in.
    (4) PROVIDED

    629762
    DRAIN
    SCREEN

    629764 RETAINING CLIPS


    DRILL FOR CONDUIT ENTRY
    (4) PROVIDED

    3/8 in.
    6mm)

    3/4 in.(44mm)

    CLEAR
    SECTION

    E
    INTERNAL DIMENSIONS

    !
    01210 COVER ONLY

    01210 COUVERCLE SEULEMENT

    19047 #8-32 x 3/8 in. SOCKET


    HEAD CAP SCREWS
    (4) PROVIDED

    1
    #8-32 x 3/8 in.
    MACHINE SCREWS
    (NOT INCLUDED)

    629761 NEOPRENE GASKET

    INSTALLATION NOTES

    1. To minimize strobe light loss, regardless of the type of horn/strobe appliance used, the clear section
    (not the section containing the cutout slots) must be centered over the strobe light lens. Failure to
    theseCONDUIT
    instructions may lead to light loss transmission.
    A 1-1/16follow
    in. DIAMETER
    06297T MOUNTING
    2. HOLE
    Damage
    Stopper
    must be installed to comply with applicable NEC, NFPA and local
    ENTRY
    MUST BE
    FIELD INSTALLED
    TABS codes.
    (4) PROVIDED
    A 1-1/16
    in.must be used.
    3. In areas where frequent wash downs occur, standoff
    blocks
    DIAMETER CONDUIT
    4. Damage Stopper may be installed outdoors when
    appliance
    carries
    an
    outdoor
    rating.
    ENTRY HOLE MUST

    06297A BACKBOX

    HORIZONTAL CENTERLINE
    OF ENCLOSURE

    DRILL FOR CONDUIT ENTRY

    FOR CONDUIT INSTALLATION (NOT INCLUDED)

    629762
    CLEAR
    BE FIELD INSTALLED
    REMARQUES SUR LINSTALLATION
    SECTION
    DRAIN
    stroboscopique, quel que soit le type dalarme
    sonore/de stroboscope utilis, la section
    SCREEN 1. Afin de minimiser la perte de lumire
    1-3/4
    629763 STANDOFF BLOCKS
    dgage (et NON la section contenant
    les COVER
    fentesONLY
    de dcoupe), doit tre centre sur lobjectif (4)
    stroboscopique.
    Le fait domettre
    PROVIDED
    01210
    CENTER LINErisque dentraner la perte de diffusion de la lumire.
    ces instructions
    CENTER LINE
    2. Le Stopper de dgts doit tre install
    de sorte
    tre
    conforme avec les normes NEC, NFPA applicables et les codes locaux.
    01210
    COUVERCLE
    SEULEMENT

    B
    C
    D
    E
    F
    G

    3. Dans les zones o des jets deau frquents surviennent, des blocs de dtection distance doivent tre utiliss.
    ANCHOR
    4. Il est possible dinstaller un Stopper de dgts lextrieur lorsque lappareil est 19033
    homologu
    pour utilisation lextrieur.
    (4) PROVIDED

    1-3/4 GASKET
    9761 NEOPRENE

    3 3/8
    in. Rain-tight hub with
    3/4neoprene
    in.(44mm)o-ring threaded for
    A
    (86mm) 3/4 in. NPT rigid conduit

    SOCKET
    CREWS
    OVIDED

    19013 SCREW
    #10 x 1 1/2 in.
    (4) PROVIDED

    3/4 in. female adapter


    3/4 in. - 1/2 in. reducing bushing
    Galvanized 1/2 x 1 in. conduit nipple
    1/2 in. conduit lock nut
    4 in. square backbox
    4 in. square box extension (optional). Use to
    extend strobe into cover area

    INSTALL CLAMP IN NOTCH 2 AS SHOWN

    MOUNTING
    HEIGHT 80 in.

    CLEANING INSTRUCTIONS

    CENTERLINE

    MOUNTING BOSS
    FOR BACKBOX

    Rinse with water to remove abrasive dust and dirt. Wash with
    FRONT VIEW OF ENCLOSURE
    629762
    soap or mild detergent,
    using a soft cloth (do not
    scrub). Rinse
    CLEAR
    1. Insert the (4) 06297T external mounting tabs into the frame assembly slots.
    SECTION
    DRAIN
    once more then
    dry with a soft cloth or chamois.
    To remove
    TOPmounting
    VIEW
    2. Using backbox assembly as a template, place against
    surface at proper location according to NFPA 72.
    HORIZONTAL CENTERLINE
    grease or wetSCREEN
    paint, rubOF
    gently
    with a cloth wetted with
    629764 RETAINING CLIPS
    3. Mark and drill (4) holes 1/4 in. (6.3mm) diameter, 1 1/4 in. (32mm) deep.
    ENCLOSURE
    01210 COVER ONLY
    naphtha. Then wash and rinse. DO NOT USE RAZOR BLADES. (DO
    (4) PROVIDED
    4. Insert the (4) anchors into the wall.
    NOT USE RAZOR BLADES.)
    5. Mount backbox to wall with screws.
    01210 COUVERCLE SEULEMENT
    19047 #8-32 x 3/8 in. SOCKET
    6. Install electrical fittings as needed.
    HEAD CAP SCREWS
    A 1-1/16 in.
    7. Install horn/strobe appliance.
    06297A
    BACKBOX
    DRILL FOR CONDUIT ENTRY
    (4) PROVIDED
    DIAMETER CONDUIT
    8. Install cover with clips and screws.
    ENTRY HOLE MUST
    CENTERLINE3 3/8 in.
    06297TGASKET
    MOUNTING
    629761 NEOPRENE
    3/4 in.(44mm)
    9. Test appliance according to appliance manufacturers instructions.
    BE FIELD INSTALLED

    INSTALLATION INSTRUCTIONS - REFER TO EXPLODED VIEW

    TOP VIEW

    TABS (4) PROVIDED

    (86mm)
    Electronic warranty form at www.sti-usa.com/wc14

    1-3/4
    CENTER LINE

    BOSS
    INSTALLATION OF STI-1210A SPEAKER HORN/STROBE
    DAMAGEMOUNTING
    STOPPER
    MOUNTING
    629763 STANDOFF BLOCKS FOR BACKBOX

    HEIGHT 80 in.
    A 1-1/16
    in. DIAMETER
    CONDUIT
    All specifications and information shown
    were
    current
    as of publication and are subject
    to change without notice.
    (4) PROVIDED
    ENTRY HOLE MUST BE FIELD INSTALLED

    TOP VIEW

    1-3/4

    A 1-1/16 in.
    DIAMETER CONDUIT
    ENTRY HOLE MUST
    FRONT VIEW OF ENCLOSURE
    BE FIELD
    19033INSTALLED
    ANCHOR
    (4) PROVIDED

    1210AIS MAY2007

    UL INSTALLATION REQUIREMENTS
    STI-1210 / STI-1221 SERIES
    CAUTION

    Attention

    This enclosure is rated to protect signaling appliances indoors and in areas of indirect weather exposure.
    The cover may be used outdoors only with devices also suitable for outdoor use.
    When covering fire-signaling appliances with this enclosure, some light and sound loss occurs. Please
    follow these guidelines listed during installation.
    Voice speaker appliance: No spacing adjustment is required for 0.5W, 1.0W and 2.0W appliances.
    Refer to the appliance manufacturer's candela rating. Multiply this number by the light loss value from the
    chart below to determine the new candela rating. Use this number and refer to the notification layout
    table of NFPA 72 for proper device locations.
    The use of this cover on audible devices decreases the sound output by 6dB(A). Actual sound level output
    should be checked after installation to determine if adequate sound levels exist. Refer to the notification
    layout table of NFPA 72 for proper device locations.

    Ce botier est homologu pour protger les appareils de signalisation dincendie lintrieur et dans les zones
    dexposition indirecte aux intempries. Le couvercle ne peut tre utilis lextrieur quavec les appareils
    appropris pour une utilisation lextrieur aussi.
    Le fait de couvrir les appareils de signalisation dincendie au moyen de ce botier risque dentraner une certaine
    perte lumineuse et sonore. Veuillez vous conformer ces directives lors de linstallation.
    Haut-parleur: Aucun ajustement de distance nest ncessaire pour les appareils tension de 0,5 W, 1,0 W et 2,0 W.
    Reportez-vous la cote candla du fabricant de lappareil. Multipliez cette valeur par la valeur de la perte de
    lumire du tableau ci-dessous pour dterminer la nouvelle cote candla. Utilisez cette nouvelle valeur et
    reportez-vous au tableau de disposition des alertes de la norme NFPA 72 pour les emplacements appropris de
    lappareil.
    Lutilisation de ce couvercle sur les dispositifs sonores diminue la puissance sonore de 6 dB(A). Le niveau rel de
    la sortie sonore doit tre vrifi aprs linstallation pour dterminer le maintien de niveaux sonores adquats.
    Reportez-vous au tableau de disposition des alertes de la norme NFPA 72 pour les emplacements appropris de
    lappareil.

    Performance Review - LIGHT DERATING FACTOR


    MANUFACTURER

    SERIES

    STI-1210

    STI-1221/1221A4X

    MANUFACTURER

    SERIES

    STI-1210

    STI-1221/1221A4X

    ADT SECURITY

    ADTG1-V SERIES

    40%

    34%

    HONEYWELL

    XLS202 SERIES

    40%

    34%

    AMSECO

    SL24W-153075

    22%

    37%

    HONEYWELL

    XLSG1-HV SERIES

    40%

    34%

    AMSECO COLORED LENSES

    SL24W-153075 A, B, G, OR R

    47%

    26%

    HONEYWELL

    XLSG1-HOV SERIES

    40%

    34%

    AMSECO COLORED LENSES

    SL24C-3075110 A, B, G, OR R

    47%

    26%

    MIRCOM

    FS-240

    47%

    26%

    AMSECO COLORED LENSES

    CSL24W-A, B, G, OR R

    47%

    26%

    MIRCOM

    MS SERIES

    43%

    45%

    AMSECO COLORED LENSES

    CSL24C-A, B, G, OR R

    47%

    26%

    MIRCOM

    MG1-V SERIES

    40%

    34%

    DETECTION SYSTEMS

    GES24 SERIES

    31%

    MIRCOM

    MG1-HV SERIES

    40%

    34%

    DETECTION SYSTEMS

    GES24-15/75

    MIRCOM

    MG1-HOV SERIES

    40%

    34%

    EST / EDWARDS

    2440S SERIES

    43%

    45%

    MIRTONE

    MG1-V SERIES

    43%

    45%

    EST / EDWARDS

    202 SERIES

    43%

    45%

    NATIONAL TIME & SIGNAL

    GES24 SERIES

    31%

    EST / EDWARDS

    G1-V SERIES

    40%

    34%

    NATIONAL TIME & SIGNAL

    GES24-15/75

    EST / EDWARDS

    G1-HV SERIES

    40%

    34%

    POTTER ELECTRIC

    AS-24-153075R

    47%

    26%

    EST / EDWARDS

    G1-HOV SERIES

    40%

    34%

    POTTER ELECTRIC

    AS-24-153075W

    47%

    26%

    EST / EDWARDS

    EG1-V SERIES

    40%

    34%

    SECUTRON

    GES24 SERIES

    31%

    EST / EDWARDS

    EG1-HV SERIES

    40%

    34%

    SECUTRON

    GES24-15/75

    EST / EDWARDS

    EG1-HOV SERIES

    40%

    34%

    SIEMENS

    202- SERIES

    43%

    45%

    2700

    57%

    SIEMENS

    G1-V SERIES

    40%

    34%

    FARADAY LLC
    GENTEX

    GES24 SERIES

    31%

    GENTEX

    GES24-15/75

    HARRINGTON SIGNAL

    GES24 SERIES

    31%

    HARRINGTON SIGNAL

    GES24-15/75

    XLSG1-V SERIES

    43%

    45%

    HONEYWELL

    SIEMENS

    U-MCS SERIES

    SYSTEM SENSOR

    SS24110ADA

    46%

    37%

    SYSTEM SENSOR

    P2, PC2, P4, PC4, SX, SC

    53%

    61%

    WHEELOCK

    RSS-24MCW

    ZITON PTY LTD

    ZG1-V SERIES

    40%

    34%

    STI-1210 Series Sound Derating Factor: System Sensor P2, PC2, P4, PC4, SX, SC series models: 6.7 dBA, General: 6 dBA
    STI Generic Light Loss Value: STI-1210 Series: 53%; STI-1221 Series: 61%
    SAFETY TECHNOLOGY INTERNATIONAL, INC. 2306 AIRPORT ROAD WATERFORD MICHIGAN 48327-1209 PHONE: 248-673-9898 FAX: 248-673-1246 www.sti-usa.com

    04/2006

    You might also like