The document describes Apollo's API-610 compliant single stage volute casing pumps and multistage vertical canned pumps. Apollo has over 100 years of experience developing pumps for various applications. They are a manufacturer of high quality, heavy-duty process pumps, especially those meeting the API-610 standard. Their pumps are used in industries such as chemical, oil and gas, power generation, and general industry. They offer single stage pumps, between bearing pumps, multistage pumps, and vertical pumps in various designs, materials, and performance ranges.
The document describes Apollo's API-610 compliant single stage volute casing pumps and multistage vertical canned pumps. Apollo has over 100 years of experience developing pumps for various applications. They are a manufacturer of high quality, heavy-duty process pumps, especially those meeting the API-610 standard. Their pumps are used in industries such as chemical, oil and gas, power generation, and general industry. They offer single stage pumps, between bearing pumps, multistage pumps, and vertical pumps in various designs, materials, and performance ranges.
The document describes Apollo's API-610 compliant single stage volute casing pumps and multistage vertical canned pumps. Apollo has over 100 years of experience developing pumps for various applications. They are a manufacturer of high quality, heavy-duty process pumps, especially those meeting the API-610 standard. Their pumps are used in industries such as chemical, oil and gas, power generation, and general industry. They offer single stage pumps, between bearing pumps, multistage pumps, and vertical pumps in various designs, materials, and performance ranges.
The document describes Apollo's API-610 compliant single stage volute casing pumps and multistage vertical canned pumps. Apollo has over 100 years of experience developing pumps for various applications. They are a manufacturer of high quality, heavy-duty process pumps, especially those meeting the API-610 standard. Their pumps are used in industries such as chemical, oil and gas, power generation, and general industry. They offer single stage pumps, between bearing pumps, multistage pumps, and vertical pumps in various designs, materials, and performance ranges.
AND ADDITIONAL SIZES Single stage pumps: OH1, OH2 p KRH p KRHA p KRHL / KRPO p KRP / KRPH
Since more than 100 years APOLLO in Goessnitz
has been developing and producing pumps for different applications with most different operating principles. In continuation of this history Apollo has developed to a Manufacturer of high quality heavy-duty Process Pumps especially according to API-610 Standard.
chains and of high Flexibility of our company, we
provide our Customers with best support in solving their problems and tasks worldwide. Our production methods and systems meet the highest level of quality and allow the implementation of orders according to different standards and regulations. The Quality Assurance in all areas of the company, including suppliers and cooperation partners, is the top priority and is consistently implemented. The most up-to-date test fields provide realistic test conditions. Today we develop and manufacture with the most modern methods from the hydraulic design over to 3D CAD design and engineering, FEM calculation to the casting patterns and parts manufacture via CAD-CAM Interfaces.
Single and two-stage between bearings pumps: BB2
p ZPR p ZPRA p KGR / KGRD
Axial split between bearings pumps: BB1, BB3
p ZMK p ZMP
Multistage high-pressure pumps, ring sections type: BB4
p HP p GP back-to-back p GMHD
Multistage high-pressure barrel pumps: BB5
p Additional sizes up to nominal size 350
with a heavy-duty process bearing housing
p TL p TG back-to-back p TGDX 20 years ago, the business Division System Engineering & System Technology was founded. With this division we can offer our Customers complete solutions from a single source. Apollo has highskilled Personnel for Pumps and Pumping Systems up to Specialists for Electrical and Control Engineering. By taking advantage of these synergies, of short lines of communication, of optimized process
p Large variety of material versions available
p Versatile shaft sealing options
Single and multistage, vertical pumps: VS1, VS4, VS6
p Low NPSH values
p HPTV p HPV p HPVX p GSTV
PUMPS
Apollo Gnitz GmbH
Walter-Rabold-Strae 26 04639 Gnitz/Germany
p DIN EN and ASME flange dimensions
Phone: +49 (0)3 44 93/ 77-0
Fax: +49 (0)3 44 93/ 77-2 10 E-mail: info@apollo-goessnitz.de w w w. a p o l l o - g o e s s n i t z . d e
Pumps Pumping Systems
Range of Applications Chemical standard pumps and additional sizes of optimum performance range for universal and demanding applications, such as: p energy technology p chemical plants p oil and gas industry
p building technology p power plants p general industry
Shaft rigid Shaft dry shaft if designed with standard mechanical seal
Flanges pressure and suction flange
according to DIN EN or ASME
different flange designs
possible
Design
Shaft Seal
p single-stage, single-flow, volute casing pump of
normal suction in dimensions according to DIN EN 22858
The seal chamber allows the installation of standard
mechanical seals according to DIN EN 12756 as single mechanical seals. Double sealing systems, cartridge mechanical seals as well as special seals are available. The material versions of the mechanical seals are adapted to operating parameters and to the liquid.
p extensive capacity range due to expansion sizes
available p horizontal design with oil-lubricated bearings
Designation
p KRCB block design with flange motor
p type KRCO with solid bearing housing and
open impeller p optionally: improvement of NPSH value by version with Inducer
Low NPSH values
optimized impeller and inlet geometries for low NPSH values design with inducer for improvement of NPSH values
Operating Data
p flanges according to DIN EN or ASME
KRCM - with magnetic coupling
KRC 50 B / 250 308 / GN
Type series Size discharge nozzle Type of Hydraulics Impeller diameter Material version Shaft seal
p KRCV vertical suspended version
Nozzle size (mm)
Capacity Head Pressure design Operating temperature
from 25 to 350 up to 3000 m3/h up to 160 m up to 16/25 bar up to 180 C
KRCB block design
Process connections Threaded connections according to ISO 228-1 standard threaded connections NPT optionally
Mechanical seal optimum associated with the process mechanical seal adaptation API piping schemes are possible
Materials 000
005
100
108
308
508
Volute Casing
0.6025
0.6025
0.7040
0.7040
1.0619
1.4408
Casing cover
0.6025
0.6025
0.7040
0.7040
1.0619
1.4408
Shaft
1.4057
1.4057
1.4057
1.4057
1.4057
1.4571
Bearing housing
0.6025
0.6025
0.6025
0.6025
0.6025
0.6025
Impeller
0.6025
2.1096.01
0.6025
1.4317
1.4317
1.4408
APOLLO-Code
Bearing housing oil-lubricated bearing housing heavy bearing housings with expansion sizes water cooling or fan cooling as option
Bearings generously sized bearings very long operating time
Performance range
KRC 50 Hz
KRC 50 Hz KRCV vertical design
Range of Applications Chemical standard pumps and additional sizes of optimum performance range for universal and demanding applications, such as: p energy technology p chemical plants p oil and gas industry
p building technology p power plants p general industry
Shaft rigid Shaft dry shaft if designed with standard mechanical seal
Flanges pressure and suction flange
according to DIN EN or ASME
different flange designs
possible
Design
Shaft Seal
p single-stage, single-flow, volute casing pump of
normal suction in dimensions according to DIN EN 22858
The seal chamber allows the installation of standard
mechanical seals according to DIN EN 12756 as single mechanical seals. Double sealing systems, cartridge mechanical seals as well as special seals are available. The material versions of the mechanical seals are adapted to operating parameters and to the liquid.
p extensive capacity range due to expansion sizes
available p horizontal design with oil-lubricated bearings
Designation
p KRCB block design with flange motor
p type KRCO with solid bearing housing and
open impeller p optionally: improvement of NPSH value by version with Inducer
Low NPSH values
optimized impeller and inlet geometries for low NPSH values design with inducer for improvement of NPSH values
Operating Data
p flanges according to DIN EN or ASME
KRCM - with magnetic coupling
KRC 50 B / 250 308 / GN
Type series Size discharge nozzle Type of Hydraulics Impeller diameter Material version Shaft seal
p KRCV vertical suspended version
Nozzle size (mm)
Capacity Head Pressure design Operating temperature
from 25 to 350 up to 3000 m3/h up to 160 m up to 16/25 bar up to 180 C
KRCB block design
Process connections Threaded connections according to ISO 228-1 standard threaded connections NPT optionally
Mechanical seal optimum associated with the process mechanical seal adaptation API piping schemes are possible
Materials 000
005
100
108
308
508
Volute Casing
0.6025
0.6025
0.7040
0.7040
1.0619
1.4408
Casing cover
0.6025
0.6025
0.7040
0.7040
1.0619
1.4408
Shaft
1.4057
1.4057
1.4057
1.4057
1.4057
1.4571
Bearing housing
0.6025
0.6025
0.6025
0.6025
0.6025
0.6025
Impeller
0.6025
2.1096.01
0.6025
1.4317
1.4317
1.4408
APOLLO-Code
Bearing housing oil-lubricated bearing housing heavy bearing housings with expansion sizes water cooling or fan cooling as option
Bearings generously sized bearings very long operating time
Performance range
KRC 50 Hz
KRC 50 Hz KRCV vertical design
PROCESS PUMPS
API-610
MULTISTAGE, VERTICAL CAN PUMPS IN STANDARD DESIGN AND ALSO ACCORDING TO API 610 / TYPE VS6
GSTV GLKV
Single stage pumps: OH1, OH2
p KRH p KRHA p KRHL / KRPO p KRP / KRPH
Since more than 100 years APOLLO in Goessnitz
has been developing and producing pumps for different applications with most different operating principles. In continuation of this history Apollo has developed to a Manufacturer of high quality heavy-duty Process Pumps especially according to API-610 Standard.
chains and of high Flexibility of our company, we
provide our Customers with best support in solving their problems and tasks worldwide. Our production methods and systems meet the highest level of quality and allow the implementation of orders according to different standards and regulations. The Quality Assurance in all areas of the company, including suppliers and cooperation partners, is the top priority and is consistently implemented. The most up-to-date test fields provide realistic test conditions. Today we develop and manufacture with the most modern methods from the hydraulic design over to 3D CAD design and engineering, FEM calculation to the casting patterns and parts manufacture via CAD-CAM Interfaces.
20 years ago, the business Division System Engineering & System Technology was founded. With this division we can offer our Customers complete solutions from a single source. Apollo has highskilled Personnel for Pumps and Pumping Systems up to Specialists for Electrical and Control Engineering. By taking advantage of these synergies, of short lines of communication, of optimized process
Single and two-stage between bearings pumps: BB2
p ZPR p ZPRA p KGR / KGRD
Axial split between bearings pumps: BB1, BB3
p ZMK p ZMP
Multistage high-pressure pumps, ring sections type: BB4
p HP p GP back-to-back p GMHD
Multistage high-pressure barrel pumps: BB5
p Modern type series with best hydraulic values
and well-balanced performance field
p TL p TG back-to-back p TGDX
p Very good NPSH values
Single and multistage, vertical pumps: VS1, VS4, VS6
p HPTV p HPV p HPVX p GSTV
PUMPS
Apollo Gnitz GmbH
Walter-Rabold-Strae 26 04639 Gnitz/Germany
Phone: +49 (0)3 44 93/ 77-0
Fax: +49 (0)3 44 93/ 77-2 10 E-mail: info@apollo-goessnitz.de w w w. a p o l l o - g o e s s n i t z . d e
p High reliability in operation and
low operating cost p Modular design allows best adaptation to customer requirements
Pumps Pumping Systems
PROCESS PUMPS
API-610
MULTISTAGE, VERTICAL CAN PUMPS IN STANDARD DESIGN AND ALSO ACCORDING TO API 610 / TYPE VS6
GSTV GLKV
Single stage pumps: OH1, OH2
p KRH p KRHA p KRHL / KRPO p KRP / KRPH
Since more than 100 years APOLLO in Goessnitz
has been developing and producing pumps for different applications with most different operating principles. In continuation of this history Apollo has developed to a Manufacturer of high quality heavy-duty Process Pumps especially according to API-610 Standard.
chains and of high Flexibility of our company, we
provide our Customers with best support in solving their problems and tasks worldwide. Our production methods and systems meet the highest level of quality and allow the implementation of orders according to different standards and regulations. The Quality Assurance in all areas of the company, including suppliers and cooperation partners, is the top priority and is consistently implemented. The most up-to-date test fields provide realistic test conditions. Today we develop and manufacture with the most modern methods from the hydraulic design over to 3D CAD design and engineering, FEM calculation to the casting patterns and parts manufacture via CAD-CAM Interfaces.
20 years ago, the business Division System Engineering & System Technology was founded. With this division we can offer our Customers complete solutions from a single source. Apollo has highskilled Personnel for Pumps and Pumping Systems up to Specialists for Electrical and Control Engineering. By taking advantage of these synergies, of short lines of communication, of optimized process
Single and two-stage between bearings pumps: BB2
p ZPR p ZPRA p KGR / KGRD
Axial split between bearings pumps: BB1, BB3
p ZMK p ZMP
Multistage high-pressure pumps, ring sections type: BB4
p HP p GP back-to-back p GMHD
Multistage high-pressure barrel pumps: BB5
p Modern type series with best hydraulic values
and well-balanced performance field
p TL p TG back-to-back p TGDX
p Very good NPSH values
Single and multistage, vertical pumps: VS1, VS4, VS6
p HPTV p HPV p HPVX p GSTV
PUMPS
Apollo Gnitz GmbH
Walter-Rabold-Strae 26 04639 Gnitz/Germany
Phone: +49 (0)3 44 93/ 77-0
Fax: +49 (0)3 44 93/ 77-2 10 E-mail: info@apollo-goessnitz.de w w w. a p o l l o - g o e s s n i t z . d e
p High reliability in operation and
low operating cost p Modular design allows best adaptation to customer requirements
