AM3440 v68 B
AM3440 v68 B
AM3440 v68 B
Access DCS-MUX
AM3440-A
Description
The Loop-AM3440-A/B/C series are Access DCS-MUXs
that combine various digital access interfaces into E1 or T1
lines for convenient transport and switching. The
Loop-AM3440 Access DCS-MUX provides access for a
variety of TDM, IP, and voice interfaces detailed on next
page. These interfaces are compatible with other Loop
products. Using these products, a DTE interface can be
extended over copper wire pairs or any E1/T1 transport
facility. For each Quad E1/T1 plug-in card, each card can
have as many as DS0 124/96 time slots from G.SHDSL,
RS232, X.21, V.35, V.36 and EIA530/RS449 interfaces,
which can be multiplexed to fill 4 E1/T1 lines. AM3440 also
supports fiber optical plug-in card, which can be used to
aggregate up to 4 E1 channels onto a single fiber optical
interface to connect with other AM3440 or O9310.
AM3440-B
AM3440-C
Features
y
y
y
y
y
y
y
y
y
y
y
2.5U
3U
# of Mini-slots
Chassis
# of Single slots
12
Max. E1
Channels
64
28
36
Max. T1
Channels
52
16
24
Cross-Connect
Backplane
Capacity
128 Mbps
56 Mbps
72 Mbps
Loop-AM3440 cards:
The Mini-Slot Cards plug into the Mini-Slots of the AM3440. The Single-Slot Cards plug into single slots, and the
Dual-Slot Cards plugs into two adjacent single slots.
Plug-in cards
AM3440-A AM3440-B AM3440-C
1-channel E1 (Single E1 interface)
1-channel X.21
1-channel V.35
Mini-Slot
1-channel RS232
1-channel EIA530
3-channel E1
4-channel E1
4-channel T1
12-channel FXO
12-channel Magneto
Conference card
4-channel TDMoE
6-channel X.21/V.11
6-channel V.35
6-channel V.36
Dual-Slot
2-channel G. SHDSL (2 pairs) with line power
24-channel FXS
24-channel FXO
Note: = Supported
= Not supported
* Future Option
Ordering Information
To specify options, choose from the list below:
Note:
1. RoHS compliant units are identified by the letter G appearing immediately at the end of ordering code.
2. AM3440 chassis types:
AM3440-CHA: 5U chassis with 128 Mb/s cross-connect capacity backplane
AM3440-CHB: 2.5U chassis with 56 Mb/s cross-connect capacity backplane
AM3440-CHC: 3U chassis with 72 Mb/s cross-connect capacity backplane
Model
(non RoHS compliant)
Main Unit
Loop-AM3440-CHA
Model
(RoHS compliant)
Loop-AM3440-CHA-G
Loop-AM3440-CHB
Loop-AM3440-CHB-G
Loop-AM3440-CHC
Loop-AM3440-CHC-G
Loop-AM3440-CHCJ
Loop-AM3440-CHCJ-G
CPU Module
Loop-AM3440-CCA-T
Loop-AM3440-CCA-T-G
Loop-AM3440-CCA-E
Loop-AM3440-CCA-E-G
Loop-AM3440-E120-G
Description
Note
Loop-AM3440-T1
Loop-AM3440-M4E75
Loop-AM3440-T1-G
Loop-AM3440-M4E120
Loop-AM3440-M4E120-G
Loop-AM3440-AFRE
Loop-AM3440-AFRE-G
Loop-AM3440-AFRT
Loop-AM3440-AFRT-G
Loop-AM3440-RT
Loop-AM3440-RT-G
Loop-AM3440-RTA
Loop-AM3440-RTA-G
Loop-AM3440-FOM-opt
Loop-AM3440-FOM-opt-G
Loop-AM3440-TS
Loop-AM3440-TS-G
Loop-AM3440-1X21
Loop-AM3440-1X21-G
Loop-AM3440-1RS232
Loop-AM3440-1RS232- G
Loop-AM3440-1V35
Loop-AM3440-1V35- G
Loop-AM3440-1E530
Loop-AM3440-1E530- G
Loop-AM3440-M4E75-G
Loop-AM3440-Q2EM-m-Tn-x
Loop-AM3440-Q4EM-m-Tn-x
Loop-AM3440-Q2EM-m-Tn-x- Quad 2 Wire E&M voice plug-in card AM3440-CHB and AM3440-CHC
only
G
Where
m = B for normal E&M or TO
Loop-AM3440-Q4EM-m-Tn-x-G Quad 4 Wire E&M voice plug-in card
(transmission only)
= A for tandem operation
n = 1 to 5 E&M Signaling Type
= O for TO (transmission only)
Loop-AM3440-QFXS-x-pt
Loop-AM3440-QFXS-x-pt-G
Loop-AM3440-QFXS-M-x-pt
G
Loop-AM3440-QFXS-GM-x-pt
Loop-AM3440-QFXO-x
Loop-AM3440-QFXO-M-x
Loop-AM3440-QFXO-M12-x
Loop-AM3440-QFXO-GS-x
Loop-AM3440-QFXO-GM-x
Loop-AM3440-3E1-cc-G
Not available
Not available
Loop-AM3440-TDMoE-PPB-G
Loop-AM3440-4E1-cc
Loop-AM3440-4E1-cc-G
Loop-AM3440-4T1
Loop-AM3440-2GH
Loop-AM3440-4T1-G
Loop-AM3440-2GH-G
Loop-AM3440-4GH
Loop-AM3440-4GH-G
Loop-AM3440-8CD
Loop-AM3440-8CD-G
Loop-AM3440-8DC
Loop-AM3440-8DC-G
Not available
Loop-AM3440-8DCB-G
Loop-AM3440-1C37
Loop-AM3440-1C37-G
Loop-AM3440-4C37
Loop-AM3440-4C37-G
Loop-AM3440-8RS232-RJ
Loop-AM3440-8RS232-RJ-G
Loop-AM3440-8RS232-DB
Loop-AM3440-8RS232-DB-G
Not available
Loop-AM3440-8DBRA-RJ-G
Future option
Not available
Loop-AM3440-8DBRA-DB-G
Loop-AM3440-RTB
Loop-AM3440-RTB-G
Future option
For controller hardware version F
and software version 6.05.02 or
newer versions.
Not available
Loop-AM3440-CONF-G
Loop-AM3440-8EM-x
Loop-AM3440-8EM-x-G
8-channel 2W/4W E&M plug-in card For x option, please refer to the
with 8 RJ45
table below for detail information
Loop-AM3440-12FXS-sn-pt
Loop-AM3440-12FXS-sn-pt-G
Loop-AM3440-12FXS-P-sn-pt
Loop-AM3440-12FXS-M-pt
Loop-AM3440-12FXS-MPP-pt
Loop-AM3440-12FXS-GS-pt
Loop-AM3440-12FXS-GMsn-pt
Loop-AM3440-12FXS-GMP-pt
Loop-AM3440-12FXO
Loop-AM3440-12FXO-G
Loop-AM3440-12FXO-M
Loop-AM3440-12FXO-M-G
Loop-AM3440-12FXO-GS
Loop-AM3440-12FXO-GS-G
Loop-AM3440-12FXO-GM
Loop-AM3440-12FXO-GM-G
Loop-AM3440-12MAG-1G-x
Loop-AM3440-12MAG-12-x
Loop-AM3440-12MAG-1G2-x
Loop-AM3440-6X21A-G
Loop-AM3440-6V35A
Loop-AM3440-6V35A-G
Loop-AM3440-6V36A
Loop-AM3440-6V36A-G
Loop-AM3440-6E530A
Loop-AM3440-6E530A-G
Loop-AM3440-6RS449A
Loop-AM3440-6RS449A-G
Loop-AM3440-5RS232
Loop-AM3440-5RS232-G
Loop-AM3440-2GHL
Not available
Loop-AM3440-4GHL
Not available
Loop-AM3440-24FXS-sn-pt
Loop-AM3440-24FXS-sn-pt-G
Loop-AM3440-24FXS-P-sn-pt
Loop-AM3440-24FXS-M-pt
Loop-AM3440-24FXS-M-pt-G
Loop-AM3440-24FXS-MPP-pt
Loop-AM3440-24FXS-GS-pt
Loop-AM3440-24FXS-GM-pt-G
Loop-AM3440-24FXS-GMP-pt
Loop-AM3440-24FXO
Loop-AM3440-24FXO-G
Loop-AM3440-24FXO-M-G
Loop-AM3440-24FXS-GM-pt
Loop-AM3440-24FXO-M
Loop-AM3440-24FXO-GS
Loop-AM3440-24FXO-GS-G
Loop-AM3440-24FXO-GM
Loop-AM3440-24FXO-GM-G
Accessories
Power Module
Loop-AM3440-SD
Loop-AM3440-SD-G
Loop-AM3440-S5
Loop-AM3440-S5-G
Loop-AM3440-SD125
Loop-AM3440-SD125-G
Loop-AM3440-S524
Loop-AM3440-S524-G
Loop-AM3440-SDB
Loop-AM3440-SDB-G
Loop-AM3440-SD24W150
Loop-AM3440-SD24W150-G
Loop-AM3440-SAB
Loop-AM3440-SAB-G
Mounting Ear
19/23 ear mounts
Users Manual
Loop-AM3440-UM
Software
Loop-AM3440-ERING
Loop-AM3440-TRING
ULSR-PDH Ring software
Conversion Cables(All conversion cables are RoHS compliant)
Loop-ACC-CAB-DB25MDB25/Male to eight BNC/Male cable; Length: 100 cm
100-8BNCM
Loop-ACC-CAB-DB25MDB25/Male to eight BNC/Male cable; Length: 300 cm
300-8BNCM
Loop-ACC-CAB-DB25MDB25/Male to four RJ48C/Male cable; Length: 100 cm
100-4RJ48M
Loop-ACC-CAB-DB25MDB25/Male to four RJ48C/Male cable; Length: 300 cm
300-4RJ48M
Loop-ACC-CAB-DB44MDSUB-44 pin/Male to two DSUB-25 pin/Female- one DSBU-9
100-2DB25F-1DB09F-DB
pin/Female (8P8C) plug, Length:100cm
Loop-ACC-CAB-DB44MDSUB-44 pin/Male to two DSUB-25 pin/Female- one DSBU-9
100-2DB25F-1DB09F-TS
pin/Female (8P8C) plug, Length:100cm
Loop-ACC-CAB-DB25MDSUB-25pin/Male to M34/Female V.35 Conversion cable
30-1M34F
Length: 30 cm
Loop-ACC-CAB-DB25M-30- DSUB-25pin/Male to DSUB-37/Female RS449 Conversion cable
1DB37F
Length: 30 cm
Y-Box(All Y-Box are RoHS compliant)
1 for 1 protection Y-Box with BNC connectors (4-E1)
Loop-VV-B-G
1 for 1 protection Y-Box with RJ48C connectors (16-E1)
Loop-VV-R-G
1 for 1 protection Y-Box with RJ48C connectors (16-T1)
Loop-VV-T-G
Blank Panels(All blank panels are RoHS compliant)
Blank Panel for Power Supply Slot (flat)
30.000333.A00-G
Blank Panel for Power Supply Slot (flat)
30.001257.A00-G
Blank Panel for Controller Slot (flat)
30.000349.A00-G
Blank Panel for mini Slot A-D (flat)
30.000335.A00-G
Blank Panel for Slot 1-12 (flat)
30.000331.A00-G
Blank Panel for Power Slot (u-shape)
30.001028.A00-G
Blank Panel for Controller (u-shape)
30.001029.A00-G
Blank Panel for mini Slot A-D (u-shape)
30.001030.A00-G
Blank Panel for Slot 1-12 (u-shape)
30.001027.A00-G
SFP Optical Modules
Please place your order by using 5 letters in the SFP optical module table below.
10
Description
Note
3
4
5
Note
Note
Circuit Type doesnt matter.
M lead provides discharge for
the A side.
Type II Circuit. This design attempts to reduce ground noise by adding two Reduced ground noise. Ground
leads: SB (Signal to Battery) and SG (Signal to Ground)
current is eliminated at the cost
of two more wires per circuit.
Type III Circuit. The SG lead serves as a discharge for the M lead. Reduces Type III is rare because ground
delay caused by combination of (a) low current electronic detectors, and (b) currents on the E return would
long runs of the E and M leads.
cause noise
Type IV Circuit. Based on the Type 2 circuit. This E&M circuit provides
symmetry.
Type V Circuit. For applications where ground noise is not an issue.
Based on the Type 2 circuit.
11
For voice card(8-channel 2W/4W E&M, Quad 2W/4W E&M and QFXS/QFXO):
Where x is used to select all of voice card signaling bits. If this option is not required, omit the x field in the ordering code.
x=
Description
Note
Follows ETSI signaling bits
E
Follows ANSI signaling bits
A
8EM
Reverse for ON-HOOK and OFF-HOOK signaling bits exchange
R
Jumper selectable for all channels
Follows customers special bit or function assignment
S
Follows ANSI signaling bits and reverse bit
AR
Follows ETSI signaling bits
E
QEM
Follows ANSI signaling bits
A
Follows customer's special bits assignment
S
Follows ANSI signaling bits
A
A and S are for QFXS/QFXO
Follows customer's special bits assignment
S
Trunk condition OFF-HOOK
T
QFXS/QFXO
Follows ANSI signaling bits w/ trunk condition OFF-HOOK
AT
T, AT, ST are for QFXO only
Follows customer's special bits assignment w/ trunk condition
ST
OFF-HOOK
Note:
1. For S (customers special bit), please contact your nearest Loop sales representative.
2. If x is not selected from table above, the default setting for signaling bits is ETSI and for trunk condition is ON-HOOK.
For 12/24-channel FXS card:
Where sn is used to select special function. If this option is not required, omit the sn field in the ordering code.
sn =
Description
Note
FXS Loop Feed = -48 Vdc with 35 mA current limit
S1
Remove alarm tone
S4
Double ring tone transmit
S5
Note: For sn (special function), please contact your nearest Loop sales representative.
Where pt is used to select the following functions.
pt=
Description
Note
PWR
complied with -48 Vdc(SD, S5, SDB), -125Vdc(SD125) and AC (SAB) power modules
PWRIE1613
complied with IEEE1613 standard, and with -48 Vdc(S5) power module
24
Note
Future Option
Note
16
16 Hz ring generator
20
20 Hz ring generator
25
25 Hz ring generator
50
50 Hz ring generator
12
For TDMoE:
SFP Optical/Electrical Module Plug-in Table
multi-mode optical module with dual uni-directional fiber, 1.25G,
1.25G
MTAFW
850nm, 550m, LC connector w/o DDM, 1000Base-SX
(mini GBIC)
Single-mode optical module with dual uni-directional fiber,
MTAFD
Dual Fiber
1.25G, 850nm, 550m, LC connector with DDM, 1000Base-SX
Commercial
Single-mode optical module with dual uni-directional fiber,
MTBTD
(0 to 70C)
1.25G, 1310nm, 2Km, LC connector with DDM, 1000Base-SX+
multi-mode optical module with dual uni-directional fiber, 1.25G,
MTBTW
1310nm, 2Km, LC connector w/o DDM, 1000Base-SX+
single-mode optical module with dual uni-directional fiber, 1.25G,
PTB2W
1310nm, 20Km, LC connector w/o DDM, 1000Base-LX
single-mode optical module with dual uni-directional fiber, 1.25G,
PTB4W
1310nm, 40Km, LC connector w/o DDM, 1000Base-LHX
single-mode optical module with dual uni-directional fiber, 1.25G,
PTC5W
1550nm, 50Km, LC connector w/o DDM, 1000Base-XD
single-mode optical module with dual uni-directional fiber, 1.25G,
PTC6W
1550nm, 60Km, LC connector w/o DDM, 1000Base-XD
single-mode optical module with dual uni-directional fiber, 1.25G,
PTC8W
1550nm, 80Km, LC connector w/o DDM, 1000-Base-ZX
single-mode optical module with dual uni-directional fiber, 1.25G,
PTC9W
1550nm, 90Km, LC connector w/o DDM, 1000Base-ZY
single-mode optical module with dual uni-directional fiber, 1.25G,
PTCVW
1550nm, 110Km, LC connector w/o DDM, , 1000Base-APD
single-mode optical module with dual uni-directional fiber, 1.25G,
PTCXW
1550nm, 120Km, LC connector w/o DDM1000Base-APD
single-mode optical module with dual uni-directional fiber, 1.25G,
PTB1D
1310nm, 10Km, LC connector with DDM, 1000Base-LX
single-mode optical module with dual uni-directional fiber, 1.25G,
PTB3D
1310nm, 30Km, LC connector with DDM, 1000Base-LHX
single-mode optical module with dual uni-directional fiber, 1.25G,
PTB4D
1310nm, 40Km, LC connector with DDM, 1000Base-LHX
single-mode optical module with dual uni-directional fiber, 1.25G,
PTC5D
1550nm, 50Km, LC connector with DDM, 1000Base-XD
single-mode optical module with dual uni-directional fiber, 1.25G,
PTC6D
1550nm, 60Km, LC connector with DDM, 1000Base-XD
single-mode optical module with dual uni-directional fiber, 1.25G,
PTC8D
1550nm, 80Km, LC connector with DDM, 1000Base-ZX
single-mode optical module, with dual unidirectional fiber, 1.25G,
PTC9D
1550nm, 90Km, LC connector with DDM
single-mode optical module with dual uni-directional fiber, 1.25G,
PTCVD
1550nm, 110Km, LC connector with DDM, 1000Base-APD
single-mode optical module with dual uni-directional fiber, 1.25G,
PTCXD
1550nm, 120Km, LC connector with DDM, DDM1000Base-APD
single-mode optical module with dual uni-directional fiber,
PKB1W
622M-1.25G
622Mbps~1.25G, 1310nm, 10Km, LC connector w/o DDM,
(mini GBIC)
1000Base-LX
Dual Fiber
Commercial
(0 to 70C)
1.25G
(mini GBIC)
Bi-directional
Single Fiber
Commercial
(0 to 70C)
PTD1W
PTE1W
PTD2W
Use 1 fiber
1550 nm from slave to master
Order PTE1W to use with
PTD1W
Use 1 fiber
1310 nm from master to slave
Order PTD2W to use with
PTE2W
Use 1 fiber
13
PTE2W
PTD4W
PTE4W
PTD6W
PTE6W
PTD1D
PTE1D
PTD2D
PTE2D
PTD4D
PTE4D
PTD6D
PTE6D
PTD8D
PTE8D
14
Use 1 fiber
1550 nm from slave to master
Order PTE4W to use with
PTD4W
Use 1 fiber
Use 1 fiber
1550 nm from slave to master
Order PTE6W to use with
PTD6W
Use 1 fiber
1310 nm from master to slave
Order PTD1D to use with PTE1D
Use 1 fiber
1550 nm from slave to master
Order PTE1D to use with PTD1D
Use 1 fiber
1310 nm from master to slave
Order PTD2D to use with PTE2D
Use 1 fiber
1550 nm from slave to master
Order PTE2D to use with PTD2D
Use 1 fiber
1310 nm from master to slave
Order PTD4D to use with PTE4D
Use 1 fiber
1550 nm from slave to master
Order PTE4D to use with PTD4D
Use 1 fiber
1310 nm from master to slave
Order PTD6D to use with PTE6D
Use 1 fiber
1550 nm from slave to master
Order PTE6D to use with PTD6D
Use 1 fiber
1310 nm from master to slave
Order PTD8D to use with PTE8D
Use 1 fiber
1550 nm from slave to master
Order PTE8D to use with PTD8D
Use 1 fiber
The list shown below is the discontinued chassis and plug in cards. For detail info, please contact your nearest Loop
sales representative.
Model
Description
Note
Loop-AM3440-CH
32 Mb/s cross-connect capacity backplane t without CPU, power AM3440-CH type Chassis
and plug-in cards
Loop-AM3440-6U
6-channel IDSL plug-in card
Loop-AM3440-10U
10-channel IDSL plug-in card
Loop-AM3440-3H
3-channel MDSL plug-in card (2Mb for 3-channel)
Loop-AM3440-3HA
3-channel MDSL plug-in card for
AM3440-A/B/C only
Loop-AM3440-3HAL
3-channel 6Mbits MDSL plug-in module with line power source AM3440-A only
Factory installed option available
with -48 Vdc powered chassis
only.
Loop-AM3440-ODP
8-channel OCU-DP plug-in card
AM3440-A/B/C only
Example 1:
Loop-AM3440-CHA, Loop-AM3440-CCA-E, Loop-AM3440-S5, Loop-AM3440-4E1-RJ, Loop-AM3440-8RS232
Loop-AM3440-FAN:
For 3440-A type chassis with a CPU card(E1 external clock), a single -48 Vdc 150W power module, 4-channel E1 interface with RJ48C
connectors, one 8RS232 plug-in module and fan tray.
Example 2:
Loop-AM3440-CHB, Loop-AM3440-CCA-E, Loop-AM3440-SDB, Loop-AM3440-M4E75, Loop-AM3440-8CD:
For 3440-B type chassis with a CPU card(E1 external clock), a single -48 Vdc 100W power module, one Mini Quad E1 interface with 75
ohm and one 8-channel G.703 interface at 64 Kbps data rate.
Example 3:
Loop-AM3440-CHC, Loop-AM3440-CCA-E, Loop-AM3440-SDB, Loop-AM3440-M4E120, Loop-AM3440-2GH:
For 3440-C type chassis with a CPU card(E1 external clock), a single -48 Vdc 100W power module, one Mini Quad
E1 interface with 120 ohm and one 2-channel G.SHDSL plug-in module (2 pair).
15
Output Signal
Framing
Connector
Framing
Connector
Electrical
Jitter
ITU G.704
BNC/RJ48C
75 ohm Coax/120 ohm twisted pair
ITU G.823
Framing
Connector
Electrical
Jitter
ITU G.704
DB25S
75 ohm Coax/120 ohm twisted pair
ITU G.823
Framing
Connector
Electrical
Jitter
ITU G.704
BNC/RJ48C
75 ohm Coax/120 ohm twisted pair
ITU G.823
Framing
Connector
Electrical
Jitter
ITU G.704
BNC/RJ48C
75 ohm Coax/120 ohm twisted pair
ITU G.823
Output Signal
Framing
Connector
16
Router Interface
Number of ports
Physical Interface
Connector
Routing protocol
Data Rates
Supporting Protocols
Router-A Interface
Number of ports
Physical Interface
Connector
Routing protocol
Supporting Protocols
Diagnostic
QoS
Router-B Interface
Number of ports
Physical Interface
Connector
Routing protocol
Supporting Protocols
Diagnostic
QoS
Data Rate
Layer 2 Protocol of RS232 Async
Layer 2 Protocol of RS232 Sync
Terminal Server Function
Router Function
One DB-44 conversion cable to one DB-9 and two DB-25 connectors
One Async RS232 port, two Async/Sync RS232 ports.
The two Async/Sync ports can be configured independently as Asynchronous or
Synchronous.
Async: 1.2kbps, 2.4kbps, 4.8kbps, 9.6kbps, 19.2kbps, 38.4kbps
Sync: 64 kbps
raw data
PPP
Supports Telnet
RIP-I, RIP-II, Static Route
Wavelength
(nm)
SAA
Dual uni-directional
1310
SBB
Dual uni-directional
1310
SCC
Dual uni-directional
1310
SDD
Dual uni-directional
1550
SEE
Dual uni-directional
1550
SSM
Single bi-directional (master)
1310/1550
SSS
Single bi-directional (slave)
1550/1310
NOTE: Other fiber optical options available on special order
Connector
Distance (km)
Power (dB)
SC (Subscriber Connector)
SC (Subscriber Connector)
FC (Fiber Connector)
SC (Subscriber Connector)
SC (Subscriber Connector)
SC (Subscriber Connector)
SC (Subscriber Connector)
30
50
30
20
100
30
30
19
30
20
12
30
20
20
2 or 4
n x 64Kbps (n= 3 to 31)
n x 64Kbps (n= 3 to 15)
16-TCPAM, full duplex with adaptive echo cancellation
RJ45
Unconditioned 19-26 AWG twisted pair
Max. 20 MA source current
From System, Line
G.SHDSL Loopback: To-LINE, To-bus
BERT: QRSS
17
Card Type
Eight RJ48
Port Number
1
2
Async
Async
3
Async
4
Async
5
Async
6
Async
7
Async
8
Async
18
Co-directional Interface
Interface
ITU G.703 64 Kbps co-directional interface
Connector
120ohm, RJ48
Line Distance
Up to 500 meters
Loopack
DTE Payload Loopback, Local Loopback
C37.94 Interface
Source
Wavelength
Connector
Optical Budget
LED
820nm 2Km reach
ST
50 Mircon core/9.6 db
62.5 Mircon core/ 15db
Outputs 8-channel
Connector
Initial Insulation Resistance
Max. Current
Max. Voltage
Outputs 8-channel
Connector
Initial Insulation Resistance
Max. Current
Max. Voltage
19
Eight RJ45
CGA busy after 2.5 seconds of LOS, LOF
A-law or -law, user selectable together for all
Balanced 600 or 900 ohms
> 46dB
> 63dB
-10 to +7 dB / 0.1dB step for transmit (D/A) gain
-10 to +14 dB / 0.1dB step for receive (A/D) gain
I/O voice power range
A/D digital input level: -66 dBm (0.00039 Vrms) ~ + 3 dBm (1.09 Vrms)
D/A analog output level: -66 dBm (0.00039 Vrms) ~ + 7 dBm (1.74 Vrms)
Signal/Distortion
> 25dB with 1004 Hz, 0dBm input
Frequency Response
- 0.25 to -1 dB from 300 to 3400 Hz
Carrier connection
Side A ( exchange side) and Side B (carrier side) setup by side switch
Idle Channel Noise
Max. 65 dBm0p
wire mode
2 wire and 4 wire (programmable)
Signaling
Type 1, Type 2, Type 3, Type 4, and Type 5, Transmit only (programmable)
Modems
Full compatibility with V.90 modems
z
All in-band signaling tones are carried transparently by the digitizing process.
z
Customer is responsible for in-band signaling compatibility between a telephone and a switch, or between a PBX and a
switch.
Twelve RJ11
CGA busy after 2.5 seconds of LOS, LOF
A-law or -law, user selectable together for all
Balanced 600 or magneto telephone impedance match
> 46dB
-21 to +10 dB / 0.1dB step transmit & receive
> 25dB with 1004 Hz, 0dBm input
- 0.25 to -1 dB from 300 to 3400 Hz, coincide with ITU-T G.712
Max. 65 dBm0p
16 Vrms
L1 and L2 (Tip and Ring), L1 and GND (Tip and GND)
Voltage: 76 Vrms (sine wave)
Frequency: 20Hz (with optional choices of 16, 25, 50 Hz)
Cadence:
1. Normal:
Ring after crank
2. PLAR ON:
-Single Ring Type: ring for 2 sec. and stop, or ring for 4 sec. and stop
-Continuous Ring Type: 1 sec on 2 sec off, or 2 sec on 4 sec off
Ringing Send Across
L1 and L2 (Tip and Ring), L1 and GND (Tip and GND)
Signaling
Magneto MRD(Ringing across Tip and Ring or Tip and Ground)
Signaling Bit A,B,C,D
Programable
Signaling is carried transparently by the digitizing process.
z
Use Magneto card default setting for communications between magneto telephones
z
Use Magneto card PLAR mode setting for communications between a magneto telephone and a regular telephone
20
Conference Card
RS232 Interface
Data Port
ASYNC Data Rate
SYNC
Connector
FXS Voice Interface
Connector
Encoding
Longitudinal Conversion Loss
Cross Talk Measure
Gain Adjustment
Signal/ Distortion
Idle Channel Noise
Loop Resistance
FXS Loop Feed
FXS Ringing
Signaling
E&M Voice Interface
Connector
Encoding
Impedance
Longitudinal Conversion Loss
Gain Adjustment
Signal/Distortion
Idle Channel Noise
Carrier Connection
Phone line power+12V
Operation mode
Wire Mode
Signaling Type
EM Ringing
Two RJ11
G.723
> 46dB
Max -70dBm0
transmit (D/A) gain 0, +6dB
receive (A/D) gain +6, 0, -6dB
> 25dB with 1004 Hz, 0dBm input
Max. 65 dBm0p
Max 1800 ohm
-48 Vdc with 25mA current limit per port
2 REN
20Hz
76 Vrms
2 sec on / 4 sec off for 1 min, or 1 sec on / 2 sec off for 30 sec (programmable)
Loop Start, DTMF
Two RJ45
G.723
Balanced 600 ohms
> 46dB
transmit (D/A) gain 0, +6dB
receive (A/D) gain +6, 0, -6dB
> 25dB with 1004 Hz, 0dBm input
Max. 65 dBm0p
Side A = exchange side, Side B = carrier side (Jumper selectable)
Type P (Jumper enable)
Master, standard (Jumper selectable)
4 wire
Type 1, Type 4, and Type 5 (Jumper selectable)
Single rainging for 5 sec only
2 sec on / 4 sec off for 1 min, or 1 sec on / 2 sec off for 30 sec (programmable)
21
22
TDMoE
Combo Gigabit Ethernet(GbE) Interface
Number of Ports
2
Speed
10/100/1000M bps
Connector
RJ45 for twisted pair GbE, LC for optical GbE, auto detection
Speed
10/100/1000 BaseT
Connector
RJ45
Ethernet Function
Basic Features
Packet Transparency
Packet transparency support for all types of packet types including IEEE 802.1q VLAN and 802.1ad
(Q-in-Q)
QoS
Traffic Control
Ingress packet Rate limiting buckets per port for ethernet port
Supporting Rate-based and Priority-based rate limiting for LAN port
Granularity:
a. From 64 Kbps to 1 Mbps in increments of 64 Kbps
b. From 1 Mbps to 100 Mbps in increments of 1 Mbps
c. From 100 Mbps to 1000 Mbps in increments of 10Mbps
Pause frame issued when the traffic exceeding the limited rate before packet dropped following
IEEE802.3X
Link Aggregation
IEEE
802.1q, 802.1p, 802.1d, 802.3, 802.3u, 802.3x, 802.3z, 802.1s, 802.1w, 802.1AX
23
MTAFW
(mini GBIC)
Dual Fiber
Commercial
(0 to 70C)
MTBTD
MTBTW
PTB2W
PTB4W
PTC5W
PTC6W
PTC8W
PTC9W
PTCVW
PTCXW
PTB1D
PTB3D
PTB4D
PTC5D
PTC6D
PTC8D
PTC9D
PTCVD
PTCXD
24
optical modules
All 1.25G optical module
downgrading to 622Mbps
data rate will be workable
622M-1.25G
PKB1W
(mini GBIC)
Dual Fiber
1000Base-LX
Commercial
(0 to 70C)
1.25G
PTD1W
PTE1W
PTD2W
PTE2W
PTD4W
PTE4W
PTD6W
PTE6W
PTD1D
PTE1D
PTD2D
PTE2D
PTD4D
PTE4D
PTD6D
PTE6D
PTD8D
(mini GBIC)
Bi-directional
Single Fiber
Commercial
(0 to 70C)
25
PTE8D
NOTE: For other special optical modules, please contact your nearest Loop sales representative.
Clock Source
Internal, E1/T1 Line, External
Alarm Relay
Alarm Relay: max. voltage 3Vdc/ max. current: 1A
Fuse alarm, and performance alarm
System Configuration Parameters
Active Configuration, Stored Configuration, and Default Configuration (Stored in Non-volatile Memory)
Supervisor
RS232 Console Port (VT100)
Performance Monitor
Performance Registers
Separate Registers
Performance Reports
Alarm Queue
Threshold
Last 24 hours performance in 15 minute intervals and last 7 days in 24 hour summaries
Network, user, and remote site
Reports include E1 Bursty Errored Second, Severe Errored Second, Degraded Minutes. Also
available in Statistics (%)
To record the latest alarm type, location, and date & time
Bursty Seconds, Severely Errored Second, Degraded Minutes
Diagnostics
Test Pattern
E1/T1 interface (Line Loopback, Payload Loopback, Local Loopback), DTE Loopback
(DTE-to-DTE, DTE to Line)
For Controller: 221-1, 215-1, 211-1, 29-1, and 4-bye user define pattern
Front Panel
LED
Loopback
26
Physical /Electrical
Dimensions
Power
Temperature
Humidity
Mounting
Line Power
Supply
Power
Consumption
AM3440-A
432.4 x 220 x 223.5 mm (WHD)
Single/ Dual -48 Vdc: -36 to -75 Vdc,
100 Watts max.
Single/ Dual -48 Vdc: -36 to -75 Vdc,
150 Watts max.
Single/ Dual -24 Vdc: -18 to -36 Vdc,
150 Watts max
Single/ Dual -125 Vdc: -40 to -150 Vdc,
100 Watts max
0-55C
0-95%RH (non-condensing)
Desk-top stackable, 19 /23 rack
mountable
Available only with DC power for
G.SHDSL card only
Max 110 Watts
AM3440-B
438 x 110 x 224 mm (WHD)
Single/ Dual -48 Vdc: -36 to -75 Vdc,
100 Watts max.
Single AC: 100 to 240 Vac, 50/60 Hz
Single/ Dual -24 Vdc: -36 to -75 Vdc,
150 Watts max
AM3440-C
438 x 132 x 224 mm (WHD)
Single/ Dual -48 Vdc: -36 to -75 Vdc,
100 Watts max.
Single AC: 100 to 240 Vac, 50/60 Hz
Single/ Dual -24 Vdc: -36 to -75 Vdc,
150 Watts max
0-55C
0-95%RH (non-condensing)
Desk-top stackable, 19 /23 rack
mountable
N/A
0-55C
0-95%RH (non-condensing)
Desk-top stackable, 19 /23 rack
mountable
N/A
Max 45 Watts
Max 57 Watts
Certification
AM3440-A
AM3440-B
EN55022 Class A, EN50024, FCC Part 15 EN55022 Class A, EN50024, EN300 386,
Class A, FCC Part 68, CS-03, IEC60950, FCC Part 15 Class A, FCC Part 68, CS-03,
IEC60950-1, EN60950-1
UL60950, IEC 61850-3, IEEE 1613
Note for IEC 61850-3 and IEEE1613:
(1) The certification only applies to AM3440-A, -48Vdc(150W) power module
(2) The magneto card does not support IEC 61850-3 and IEEE 1613
(3) Use shielding cable with the following modules:
AM3440-C
EN55022 Class A, EN50024, EN300 386,
FCC Part 15 Class A, IEC60950-1,
EN60950-1
SNMP of CCA
Single RS232
Single EIA530
Single V.35
z Terminal
Router-A
ATM/FR E1/T1
z RS232-X.50
z DTE
z RS232
V.36/RS449/EIA530
X.21
Server
X.50-8
Single X.21
Router
of Conference
V.35
Compliance
ITU G.703, G.704, G.706, G.732, G.736, G.823, G.826, G.711, G.712, G.775, O.151, V.11, V.28, V.54
Specifications for Loop-VV Y-BOX
LINE
Connector
Port Number
Protection
Mechanical
Height
Width
Depth
BNC or RJ48C
For Y-BOX with BNC connectors: 4 line ports
For Y-BOX with RJ48C connectors: 16 line ports
For Y-BOX with BNC connectors: support 2 Quad E1 plug-in card, 4 active E1, 4 standby E1
For Y-BOX with RJ48C connectors: support 8 Quad E1 plug-in cards, 16 active E1, 16 standby E1
For Y-BOX with RJ48C connectors: support 8 Quad T1 plug-in cards, 16 active T1, 16 standby T1
44.5 mm/ 1.75 in
432 mm/ 17 in
100 mm/ 3.9 in
* Future Option
27
Application Illustration:
28
E 1/ T 1
E 1/ T 1
E 1/ T 1
NETWORK
LoopView
SNMP
Manager
E1/T1
LAN
AM3440-B
CTRL 2
CTRL 1
Plug - in(2)
Plug - in(1)
P
O
W
E
R
1 - channel E1
1 - channel T1
Mini Quad E1
1 - channel E1 ATM Frame Relay
1 - channel T1 ATM Frame Relay
Dual- slot plug-in cards:
6 - channel X.21/ V.11
6 - channel V.35
6 - channel V. 36
6 - channel EIA530/RS449
5 - channel RS232 with X.50 subrate
24 - channel FXS
24 - channel FXO
4 - channel T1
8 - channel OCU - DP
QFXS / QFXO
channel C37. 94
4 - channel C37 . 94
8 - channel RS232 with X.50 subrate
8 - LAN- port / 64- WAN - port Router -B
Conference card
TDMoE
8- Data Bridge (future option)
29
E 1/ T 1
E 1/ T 1
E 1/ T 1
NETWORK
LoopView
SNMP
Manager
E1/T1
LAN
AM3440- C
CTRL 2
CTRL 1
Plug - in(3)
Plug - in(2)
Plug - in(1)
P
O
W
E
R
Mini Plug-in( D)
1 - channel E1
1 - channel T1
Mini Quad E1
1 - channel E1 ATM Frame Relay
1 - channel T1 ATM Frame Relay
4 - channel T1
8 - channel OCU - DP
QFXS / QFXO
1 - channel DTE
(1X.21, 1V.35, 1RS232, or 1EIA530)
channel C37. 94
4 - channel C37 . 94
8 - channel RS232 with X.50 subrate
8 - LAN- port / 64- WAN - port Router -B
Conference card
TDMoE
8- Data Bridge (future option)
30
E1
HDLC
Router
Port A
4E1
TS31
TS1-30
TS1-30
Management PC
MASTER
Port B
4E1
HDLC
Port C
4E1
TS1-31
TS1-31
Clk: A/Internal
TS1-2
TS3-4
Port C
4E1
TS30
Port A
4E1
TS5-31
TS1-31
TS5-6
TS7-8
Port C
4E1
TS29
TS30
Clk: A/B
Port B
4E1
Port A
4E1
TS27
TS15-16
TS13-14
Port B
4E1
HDLC
TS29
Port C
4E1
TS28
HDLC
Port D
4E1
TS1-31
Clk: A/B
Clk: A/B
SLAVE #2
Port D
4E1
SLAVE #4
TS1-12
TS17-31
Port A
4E1
TS1-4
TS1-31
TS9-31
Port D
4E1
TS27
TS1-31
TS1-31
SLAVE #1
HDLC
HDLC
Port B
4E1
Clk: A/B
Port D
4E1
Inband
Port A
4E1
Port B
4E1
SLAVE #3
TS1-8
TS13-31
TS28
TS11-12
TS9-10
Port C
4E1
Note: ULSR ring does not suport E1 unframe mode. Users must use E1 frame mode to set up a ULSR ring.
LoopTelecom.com
Worldwide
Taipei, Taiwan
North America
Tianjin China
8 Carrick Road
Palm Beach Gardens
Florida 33418, U.S.A.
Tel:+1-561-627-7947
Fax:+1-561-627-6615
jimber561@aol.com
31