JAN 701B Handouts
JAN 701B Handouts
JAN 701B Handouts
Start-up Menu
Navigation & Planning
Usually, this menu item should be leftclicked. If no menu item is selected, this
item will be automatically selected.
When this occurs, the [Startup screen]
will first appear, and then the Navigation
& Planning screen will be displayed.
Chart Portfolio
You can update the S-57 chart. Leftclicking this menu will open the chart
portfolio screen. (See 8 Chart
Portfolio.)
Playback
You can play back the sailing you have
made. Left-clicking this menu will open
the playback screen. (See 9
Playback.)
User-Marking/Highlighting
can input the following marks on the chart.
Event Mark : During voyage, you can put an Event
Mark at the ship position.
Information Mark: You can put an Information
Mark at any position.
Tidal Stream Mark: You can put an Tidal Mark at
any position. The speed (knot) and time can be
input.
Highlight: You can put a highlight area at any
position for your reference.
My Port List
Adding to My Port List
You can register any position on the chart to the My Port List. After registration,
you can directly access to that position by selecting a port name from the My
Port List. The general registration procedure is as follows:
My Port List
Deleting My Port List
Logbook
In the normal menu
Select [MENU] - [(7) Main]
- [(7) Logbook] in that
order.
The Logbook panel
opens. Contents of the
logbook are as follows:
Export Logbook
[Export]: Logbook content is saved as
a CSV file. The saved file can be
opened with a spreadsheet program
and edited with a personal computer.
Select one of the following items in
the Export panel:
Select Message: The selected record
data will be exported.
From/To: Logs saved during the term
specified in the entry boxes will be
exported.
Route Planning
You can make a route by using one of the following methods. After you have
made a route, you can edit it. Edition is possible by using either method.
Route planning using the Table Editor
You can make a route by entering each WP value in the WP entry table. Using
the [View Sync] button, the current WP can always be displayed on the
chart during editing.
Route planning using the Graphic Editor
You can make a route by graphically drawing each WP on the chart.
Table
editor
Button functions
Left-click to close the route file and exit the Table Editing mode.
Left-click when making a new route file.
Left-click to recall a route file previously made.
Left-click when saving the route file currently made.
Left-click when printing the WP contents. (Only when connected to a printer)
Left-click when inserting a new WP.
Left-click when deleting a WP.
Divide the GC leg.
Left-click when checking the safety of the route. As a result of the checking,
warning
dialog box will appear if the route is not safety.
Left-click to check if the route exceeds the limit (leg length, etc.).
Left-click when you want to display the WP during editing.
Left-click the drop-down list button to left-click one of the items. The Name
column contents in the editing table change according to the selected item.
Name: You can enter name in the Name column. WP to WP: WP to WP
information is displayed. Total: WP0 to WPn information is displayed.
Left-click to select
[UNLOAD].
Left-click [Close]
WP1 entry
Position (Lat./Lon.)
Left-click [New].
Repeat WP entry until
the final WP.
Left-click [Save]
End
Left-click to select
Enter the Graphic [UNLOAD].
Editing mode.
Left-click [New].
WP0 entry
Using the cursor
Left-click [Close]
End
File Manager
Route files, user chart files and screen image files
can be copied from the hard disk to floppy disks
and vice versa. Route files, user chart files and
screen image files can also be deleted.
Example of Copying: Copying a route file from
the hard disk to a floppy disk.
1) Left-click the drop-down button a, then select
Route File from the box. When route files are
selected, all files with the extensions .rtn and
.rta are displayed.
2) Select Local Disk from box b. The route files
saved on the hard disk will be displayed in box c.
3) Left-click the drop-down button d, then select
Floppy Disk from the box.
4) Insert a floppy disk into the floppy disk drive,
left-click the file to be copied from box c, then
left-click the [Copy] button (f) to start copying.
The selected file will be copied to the floppy
disk. When a file is selected from the box e, and
the button g is clicked, then a file on the
floppy disk can be copied to the hard disk.
In order to copy a user chart, User Map should
be selected from the box a. (Files with the
extension .uch are displayed.)
Deleting Files:
1) With files displayed in box c, select a file or left-click
the [Select All] button to select all files.
2) Left-click the [Delete] button under box c. The
delete confirmation panel will be displayed, so press the
[OK] button to delete the file(s). The same process can
be used for box e to delete files in box e with the
[Delete] button under it.