H.

264 Standalone DVR

4CH/8CH/16CH

USER MANUAL v1.00

INDEX
............................................................................................................................ 5
Chapter one Products Introduce
Introduce............................................................................................................................
1.1 Technical Parameter......................................................................................................................................................................................................................... 5
1.2 Performance..................................................................................................................................................................................................................................... 6

.............................................................................................................................................. 8
Chapter Two Hardware
Hardware..............................................................................................................................................
2.1H.264 standalone 4CH/8CH/16CH DVR..........................................................................................................................................................................................8

...................................................................................................................... 14
Chapter Three Products Introduce
Introduce......................................................................................................................
3.2 Powering On.................................................................................................................................................................................................................................. 18
3.2.1 Boot-strap......................................................................................................................................................................................................................... 18
3.2.2 Shutdown..........................................................................................................................................................................................................................18
3.3 Enter System Menu........................................................................................................................................................................................................................ 19
3.4 Power-down and Revert................................................................................................................................................................................................................. 20
3.5 Preview.......................................................................................................................................................................................................................................... 20
3.6 Recording operation....................................................................................................................................................................................................................... 21
3.6.1 Manual recording.............................................................................................................................................................................................................21
3.6.2 Playback video.................................................................................................................................................................................................................22
3.6.3 Recording setting.............................................................................................................................................................................................................23
3.6.4 Video Detection................................................................................................................................................................................................................26
3.6.5 Alarm setting and alarm linkage recording.................................................................................................................................................................. 30
3.7 Backup recording file.....................................................................................................................................................................................................................31
3.7.1 Detection device.............................................................................................................................................................................................................. 31
3.7.2 Backup operation.............................................................................................................................................................................................................32
3.8 How to control PTZ....................................................................................................................................................................................................................... 33
3.8.1 Method of connection......................................................................................................................................................................................................33
3.8.2 The method of PTZ control operation...........................................................................................................................................................................33
3.8.3 PTZ control....................................................................................................................................................................................................................... 34
3.9 3G module......................................................................................................................................................................................................................................35

.................................................................................................................. 38
Chapter Four Menu Operation Guide
Guide..................................................................................................................
2

4.1 Menu Navigation............................................................................................................................................................................................................................38

4.2 Menu Operation............................................................................................................................................................................................................................. 41
4.2.1 Play Back..........................................................................................................................................................................................................................41
4.2.2 System Information......................................................................................................................................................................................................... 42
4.2.3 System Setting.................................................................................................................................................................................................................46
4.2.4 Record Control.................................................................................................................................................................................................................53
4.2.5 Hard Disk Drive Management....................................................................................................................................................................................... 53
4.2.6 Alarm Control................................................................................................................................................................................................................... 54
4.2.7 Advanced Options........................................................................................................................................................................................................... 54
4.2.8 File Backup.......................................................................................................................................................................................................................60

Chapter Five IE Preview

..........................................................................................................................................
61
Preview..........................................................................................................................................
..........................................................................................................................................61
5.1 logging on interface....................................................................................................................................................................................................................... 61
5.1.1 To input the IP address................................................................................................................................................................................................... 61
5.2 System Settings.............................................................................................................................................................................................................................. 64
5.3 State control................................................................................................................................................................................................................................... 67

.......................................................................................................
70
.......................................................................................................70
Chapter Six Instruction for mobile monitor
monitor.......................................................................................................
6.1. DVR Setup.................................................................................................................................................................................................................................... 70
6.2. Mobile phone setup....................................................................................................................................................................................................................... 70

........................................................................................
97
........................................................................................97
Chapter Seven FAQ (Frequently Asked Questions)
Questions)........................................................................................

...

Power
This DVR select the adaptor is DC12V; please make sure the power supply voltage before use the machine.
If long time do not use the machine, please turn off the power of DVR machine, and let the electric plug away from power socket;

...

safety
This DVR only for indoor use, as for prevent short circuit or electric danger, please do not let the DVR in the raining or humid area.
In case any solid or liquid inside the case of DVR, please turn off the power immediately, and ask the qualified technician check it before reboot
the DVR;
The DVR is the precision machine, there is nothing for repair by customers themselves in it, when it break down, please ask the qualified
technician to check and repair, or contact with the agents of it.

...

Installation
Please keep the DVR in level for installation;
Pay attention to equipment ground;
For the first time to install the DVR, please make sure if the hard disk drive install or not;
Prevent to open the case and change the hard disk drive in electrified;
Propose to select the performance of hard disk drive will be 7200 rotating speed person second;
Please select the appropriate installation site, so let the air can be free flow inside the DVR, prevent the machine overheating;
Please do not install the DVR nearby the radiator, air chute etc. heat source, or where the direct sunlight, too much dust, or mechanical vibration
or attack;

Chapter one Products Introduce

1.1 Technical Parameter
Compression standard
iInput

H.264 baseline profile@L3.1

Composite 1.0Vp-p/75,BNC4/ BNC8/ BNC16

Video output

Composite 1.0Vp-p/75,BNC1, VGA1

Resolution

Preview

Bit rate

Preview/ recording
4ch 100fps(PAL), 120fps(NTSC
8ch 200fps(PAL), 240fps(NTSC)
16ch 400F/S(PAL), 480F/S(NTSC)

Audio input

-8dB~22k,RCAx4(4ch), RCAx4(4ch)

Audio output

-8dB~92dB,RCAx1

Audio decode

ADPCM

Alarm input

Input low level alarm, user setting normal open or normal close, Varies according to
the model

Alarm output

1ch output or 2ch output;Varies according to the model

Recording mode

Manual recording, timing recording , motion detection recording and external alarm
recording

Simplex/duplex/ triplex

triplex(recording, playback , LAN transmission)

LAN

RJ45(10M/100M self-adapting)

PTZ control

Yes

Communication

RS4851USB2.01

USB

USB mouse control

Hard disk drive

1or2x SATA2TB or above

D1 720576PAL
720480NTSC
CIF 352288PAL320240NTSC
Recording D1 720576PAL
720480NTSC
CIF 352288PAL320240NTSC

Remote control unit

Yes

Dimension

Main board size : 220mm x 112mm

Power supply

AC110-230V

1.2 Performance
Real-time
monitoring

Turn-by-turn analog video output and VGA Storage

interface, according to TV monitor or VGA function
monitor to live view in 1/4/8/9/16 or more
video channel to monitoring the recording
streaming and the record file capacity in
every hours every channel, to presentation
the status of video channel, recording,
dynamic detection, video loss, monitoring
lock-up. You can view the system log in
local DVR.

Internal 1or2 SATA interface, MAX 2TB hard disk

drive, the file of hard disk drive include cover mode
circulation recording and none cyclical recording,
the storage data to use the proprietary format, can not
falsify the data, make sure the data safety.

Compressi
on format

Video compression format:: H.264

Support 8ch video and audio signal, video
and audio maintaining stability in
synchronous.

Through USB interface to backup. ( for example USB

Backup
function

drive and mobile hard disk drive etc.)

The video file can be downloaded by Client software
through LAN to laptop hard disk drive.

Recording
and

* Multiplex, to achieve real time recording Network

to be independent at the same time to Operation

* through network to real time remote monitoring;

* PTZ control

playback
function

single channel playback, research and function

backwards, network monitoring, network
search download etc.
* Multiple recording mode: Manual,

* recording research and real time playback;

* system setting parameter modify and the system
software upgrade;
* remote monitoring alarm process and view the

normal, alarm, linkage, dynamic detection

recording etc. turn-by-turn pre-recording
function.
* Can playback the record file in DVR
through network, to achieve quick-search
the recording file and recording type,
multiple playback type: SLOW, Fast

system log message;

* to use embedded TCP/IP protocol and Embedded
Operation System, can access the DVR through client
software program bundle in the package;
* Management Model: use enhancement user
management, password mode to make sure the valid
user to login the system, flexible convenient and fast

Forward, Backwards, step Forward.

Display the exact time of event occurred
while recording file playback.

to set the different permission user requirement.

Alarm
linkage
function

8ch alarm input ( alarm event mode can be Comset normal open or normal close
munication
selection), and turn-by-turn video loss
port
alarm, dynamic detection alarm, the alarm
device may be smoke detection censer,
temperature detector, IR detector.
Possess 4ch relay switch alarm output,
flexible convenient and fast to achieve
alarm linkage and lighting control at site.
Theyre possess protective circuit in Alarm
input and alarm output port, make sure the
device not to damaged.

* Possess specific interface, achieve alarm input and

PTZ control;
* possess a standard Ethernet interface, achieve the
network remote monitoring.

PTZ
control

* Support PTZ decoder through RS485 Intelligent

communicate
operation
* scalable multiple decoder protocol, easy
to achieve to control the pan driver and

* mouse operation function;

* In menu for same setting and to process shortcut
copy operation

speed dome camera function.

Chapter Two Hardware

2.1H.264 standalone 4CH/8CH/16CH DVR
2.1.1 Hard disk Installation
For the first use, please install the hard disk

1 Remove the screws on both sides of shell

2 extracted from the next cover up

3 connect hard disk and mother board

4 fix the screw of hard disk

5 close cover

6 install the screws on both sides of shell

2.1.2 Rear panel

4CH

Item

Interface

VIDEO IN

4ch video input

AUDIO IN

4ch audio input

V-OUT

1ch video output

A-OUT

1ch audio output

VGA

VGA monitor

NET

RJ45 for internet

USB/ MOUSE

ON/OFF

Power supply switcher

DC-12V

Power adaptor port

10

Description

First USB for backup or upgrade system of DVR; Second

USB for mouse

ALARM IN1 2 3 4 alarm input port

RS-485A, B

ALARM OUT: N1 alarm output port, every channel connect

every two channel OUT, COM port is for GND;

8CH

10

GNDOUTCOM;

Item

Interface

VIDEO IN

8ch video input

AUDIO IN

4ch audio input

V-OUT

1ch video output

A-OUT

1ch audio output

VGA

VGA monitor

NET

RJ45

USB/ MOUSE

ON/OFF

Power supply switcher

DC-12V

Power adaptor port

10

Description

First USB for backup or upgrade system of DVR; Second

USB for mouse

ALARM ININ1-IN4 alarm input port

RS-485A , B

ALARM OUT: N1 N2 alarm output port, every channel connect

every two channel OUT, COM port is for GND;

16CH

11

GNDOUTCOM;

Item

Interface

VIDEO IN

16ch video input

AUDIO IN

4ch audio input

V-OUT

1ch video output

A-OUT

1ch audio output

VGA

VGA monitor

NET

RJ45 for internet

USB

First USB for backup or upgrade system of DVRSecond

ON/OFF

Power supply switcher

DC-12V

Power adaptor port

10

Description

ALARM IN4CH

USB for mouse

alarm input port

RS-485A, B

ALARM OUT: N1 N2 for alarm output port, every channel connect

is for GND;

12

C and O;COM port

2.1.3 Alarm input port

8chanel alarm input, the mode of alarm input is no restriction (possible is normal open also normal close);
the GND alarm detector connect to COM under parallel connection (the power of alarm detector supply by external power supply;
the ground terminal of alarm detector join-up in parallel with DVR;
the NC of alarm detector connect with the input end (alarm) of DVR;
when you want to reset the remote alarm of triggered , the +12V power supply of alarm detector supply by DVR, for example, smoke detector.
When you select the external power supply, please share the GND with DVR;
Alarm input circuit:

13

Alarm inlet connection:

2.1.4 Alarm output port

4 way switching value alarm output, selectable in normally open contact, also selectable in normally closed contact, the external alarm device
should be need Vcc;

14

Chapter Three Products Introduce

Operation instruction
3.Operation

15

3.1.1 Remote control AND Front panel keypad

S/N

pad Name
KEYpad

Operating instruction

OK

SWITCH

Switch capital letter/small letter/symbol

input on soft keyboard

Access main menu

10

Switching of 1/4/8/9 Preview mode

Exit operation or enter upper menu

Close soft keyboard
Close current window
Exit from current control
Return to last menu
Exit from PTZ control under preview state

11

PTZ

Access/exit from PTZ control under preview

state

12

+/-

Volume or number increase/reduction

Select item of the list

13

SEARCH

Search for playback

14

ALARM

Alarm reset

15

0~9 10+

Digital input Corresponding;

Channel is magnified in full screen under
preview state

Play / Pause

16

FN

Short cut

17

18

Power ON/OFF

DEV

Select DVR1,2,3,

MENU

ESC

Slow playback,1/2 , 1/4 , 1/8 and

single frame play

Fast playback, 2,4 and 8 playback

Playback stop

Operating instruction

POWER

Keypad Name

This button is used as enterandok key

in
most circumstances

S/N

...

Four-way to move the focal point in main

menu, up and down
to move in the normal window, to control pan
driver to move in
the PTZ control windows

REC

To mode of recording

16

3.1.2 How to use mouse of DVR (for right hand mouse)

To any function menu icon click the mouse left key into the menu
To run the control point out operation
Change again select frame or motion detection piece mode
Click the assemble frame popping to pull down the list
1

Left key single click

In the input frame, can select digit, character, lowercase, block letter, left click mouse on
the keyboard of character input, thats. say move back, say blank

17

Right click mouse, popping the shortcut menu, as follows;

Right click mouse

while life view monitoring, popping short cut menu: multi picture mode, recording mode,
PTZ control, clear alarm,enable listen into, video adjustment, recording
control,TV/VGA Switch display,main menu etc short cut manner. Thereinto, the PTZ
control and video adjustment
manner are set the video channel where cursor locates at that time, before setting, if the
mode if multi picture, then the system can automatically switch to the correspondence
single channel picture.
In the title bar, if you click right key of mouse wherever outside of the edit box and the
button, it will close current window.

Double click left button

To run the ActiveX Control ActiveX special operation, For example, double click the
certain item of record listed file, then the system will playback the segment
record video.
Depress the left key and dragging the mouse, banding select Motion detection area,
depress right key of mouse and Dragging, cancel the banding select area.

Dragging the mouse

Dragging playback ProgressBar back and forth to dolly moves, to achieve the playback
position adjustment. Dragging the audio and video regulation parameter bar dolly moves,
to achieve the parameter adjustment.

18

3.2 Powering On
.1 Boot-strap
3.2
3.2.1
IfPOWERpilot lamp off, please follow the operation step by step:
First step: if the power does not plug into, please plug into the power, then the DVR-4108 begin to start, by now, if the DVR-4108 still inactive, to
enter the next step;
Second step: turn on the power supply of the DVR-4108 at the back panel, DVR begins to start.
IfPOWERpilot lamp to offer RED, press the POWERkey, DVR-4108 begins to start.
The video output mode of DVR-4108s the default setting is multi picture channel mode after starting the DVR-4108, if the time of start the
DVR-4108 is in the Timing Recording Setting, the DVR-4108 will automatically to start the Timing Recording function, the corresponding channels
recording pilot lamp will be light, the DVR-4108 is normal operation.
If you do not install the hard disk drive in the DVR-4108 before turn on the power, after Login the system, the system will call attention to as follows;

3.2.2 Shutdown
There are two safety mode for Shutdown
A. Pressing the POWER key in 3 second, according to Shutdown warning to stop the all running of DVR-4108, then you can turn off the power key
behind the DVR case.

19

B. EnterMain MenuLog OutselectShutdown system.

Abnormal shutdown
Through the rear panel to shutdown
During the DVR-4108 running, directly to turn off the power through the rear panel power switch, please avoid as much as possible to do it.
(specially while the DVR recording).
Directly to pull up the power cable of DVR-4108
While the DVR-4108 running, directly to pull up the power cable of DVR-4108, please avoid as much as possible to do it. (specially while the DVR
recording).
Caution: In some area, the power supply is irregularity, it will cause the DVR-4108 working not normal-operation, the DVR-4108 will be damaged in
serious. In this surroundings, suggest select the stabilized voltage supply.

3.3 Enter System Menu

How to enter the Menu Mode
PressMENUkey, enter main menu
ClickMouse right keyenter shortcut menu
ClickT-RSHshortcut, enter playback menu
clickRECshortcut, enter manual recording operation menu
ClickPTZshortcut, enter PTZ control operation menu

20

Introductions: you should input the user name and password when you login DVR system, the default user name is admin, and the password is
666666.
There are three default user, thats admin, user, default, and the user and defaults password is 123456. The user name admin is the top
authority user in default, and the default is the low authority user in default, only for monitoring, playback, backup etc. authority.

Password security: you can try 5 times in 30 minutes, otherwise, the user name will be locked;
Remark: for safety, suggest to change the password after use the DVR-4108, put the additional user name and change the default user name, for
the use setting please refer to Menu operation----User management.
Concerning the input method: except the front panel and remote control unit can be input, you also can input the character in the InputBox, single
left click the mouse, the system will dropping the software keyboard.

3.4 Power-down and Revert

When the DVR run under Recording, Timing recording, Alarm Recording, if the power of DVR to be turn off or be forced to turn off, and turn on the
power again, DVR will automatically save the recording before turn off, and automatically to revert the operating condition before turn off to work on.

3.5 Preview
After log in system of DVR, system will automatically directly enter the preview mode
In the preview picture, you can see the overprint date, time, channel name, if the date and time is not correct show on the picture, re setting the
date. There is a alarm input mode icon. (the meaning of every kind of icon as following table)

21

Channel picture attention

1

When that channel recording, this mark will be showed

on it

When there is a motion detection alarm in that channel, 4

this mark will be show on it

When there is a video loss in that channel, this mark will

be showed on it
The mark of alarm input mode

When the video be Dodging, this mark will be showed on that channel

3.6 Recording operation

Customer can according to select the different kind of recording mode in this system. For the different kind of recording mode you set, the channel
will be showed the mark on everyone channel.

3.6.1 Manual recording

permission. Please make sure the hard disk drive has
Note: Manual recording operational requirement the user should have recording
recording
been installed and it has been formatted
formatted..
Input manual recording operation menu
1Input
Single click right key of mouse or In main menu=> recording control can into manual recording operation menu. Under preview mode, press REC
key or on the Remote controller unit key into recording control operation menu, as follows:

22

2) The explanation of manual recording operation menu

manual recording Priority level highest, no matter currently what status of every channel, after carry out the manual press, corresponding channel
will be record common in progress;
Auto recordingSetting channel recording by setting condition to record under Timing, Motion detection and Alarm in Recording Setting;
Stop RecordingAll video channel stop recording;
All Possible to select all video channel recording or stop recording.

3.6
3.6..2 Playback video
There are two mode in video playback: One channel playback and four channel playback at same time.
One channel playback: Single click right mouse key in anyone video channel under Preview menu, select Record Playback in the popping menu,
search the record file and playback in the popping recording file menu, then the record that selected will be play backed in that video channel.

Four channel playback:Main menuRecord Search, click the icon of mark file in the red frame as follows;
Select the corresponding video channel to search, double click the record file to playback; then move the mouse to the Second video channel to
search the record again, double click the record file and playback the record file in it; to do the same step mention above, you can playback four channel
record file at the same time.
Toolbar of playback

23

Button

Description

Button

Description

Playback/pause

Open the record file

stop

Single video channel playback mode

From quick playback, slow to

normal play back mode

Four video channel playback mode

Slow, fast
Sound on/off

Hide the toolbar

Voice adjustment

Close the window menu

Note:
1) During playback the Playback Tool will show the file playback speed, channel, timing, playback speed etc. information in the Playback control panel;
2) Cant same time to select the Fast forward operation function in over 2 channel, only progress in anyone channel;
3) Can drag the Playback Speed toolbar by mouse;

3.6
3.6..3 Recording setting
Two mode in recording: Manual Recording and Auto Recording
3.6.3.1 Manual Recording

24

Click Main MenuRecording Control, as above diagram,select anyone channel to recording, the White color means the recording function
enable,Black color means disable;
Also can select All mark,if select it, then the recording function enable in all channel, click confirm.
3.6.3.2 Auto Recording
The Auto Recording function includes;

External Alarm Recording: Please find the details of it in 3.6.5 in this menuAlarm setting and Alarm linkage Recording
Normal Schedule Recoding: The default setting is 24hours non-stop recording after the First time to boot the DVR system. Login the menu, can set
the Timing of DVR to record continually, thats recording in the timing that you select in sometime area, find the details
setting in Main MenuSystem SettingRecording Setting
Motion Detection Recording: Please find the details of it in 3.6.4 in this menuMotion Detection

25

Including the time slice of setting Normal Recording, Motion Detection Recording, Alarm Recording;
Channel/Recording ScheduleDrop-down menu, select the corresponding channel Number/Week to set, select ALL can set the all channel
function enable in onetime;
Alarm RecordingCan record 3-5seonds video before the alarm event to occurthe timing depends on the capacity of video streaming;
Time SliceThe means the recording mode of that channel currently in some time, anti-display setting normal, alarm recording mode, can
select single or multi in it, four time slice for setting selectable. Under some recording mode and the time in different time slice, you
can duplicate to set, the time setting range is 00:0024:00, after set the channel parameter, please press the save key to save the
setting in the system.
Shortcut setting
1) Duplicate the same setting from one channel to another channel, for example, select channel one, after recording mode setting, click the copy
icon into the others.
2) User should save the setting one by one after channel setting.

26

3.6
3.6..4 Video Detection

Note:
1) SelectMain MenuSystem SettingVideo Detection to enter the setting menu;
2) During motion mode switch, there is not None Area and Sensitivity setting in video loss and video cover detection;
3) When there is a motion detection event in one channel, the symbol of motion detection will show in the channel;
4) No need to use FN function key when you drag the motion detection area by mouse, click the right key of mouse to save the setting before exit, the
user press the SAVE to confirm before exit the Motion Detection menu.

27

VIDEO Detection
1VIDEO
To excessive the video picture, when the system detect the motion event that the sensitivity fit for the preinstall, then motion detection alarm on.

Method of Operation:
Channel Select what you want to set the motion detection function channel area;
Alarm ModeSelect the motion detection mode: Motion Detection;
Recording Channel Select what you want to need the channel to recording can repeat to select when there is a alarm, the system can
automatically to start the recording in that channel, At the same time, should set the motion detection recording mode in
Recording Setting, set the Auto Recording mode in Recording Control;
Clear Time DelayThat means, when the motion event finish, the recording will be stopped in extending time, the time in Second, the range from
5-300;
Channel CruiseAnti-displaySetting when there is an alarm event, it will automatically to switch the single channel video that set the recording
channel before. The switching time setting in theLocal Display setting;
RegionMove the mouse to setting, press ENTER key to enter; the set region divide into 192 (16x12) region;
The border blocks representatives where the cursor locates, the green region is dynamic detection security region, achromatic color is open
28

security region. Press <Fn> key to set on security or not, set the on security press direction key to move the green border grid to set the dynamic
detection region, after setting, press <ENTER> confirm to exit dynamic detection region setting, if press < ESC> exit dynamic detection region then it
will cannel the all security setting. When you exit the dynamic detection menu, must to press save key to save the setting, otherwise, the dynamic
detection security function is disabling.

SensitivityYou can set them to: Highest, high, normal, low, lowest;
Alarm outputWhen there is dynamic detection event, to start the linkage alarm output port to the external alarm device;
Screen presentationInvert signify show happen dynamic detection, it will show the prompting message;
Time SliceCan set the alarm output situation in two time slice, please do not set the repeat in the time slice setting, alarm output and prompting
message option invert the corresponding channel option selector button, thats there is an alarm to start alarm output or prompting
message in the selected time slice.

Video Loss
2Video
When there is a video loss situation, selectAlarm OutputandScreen presentation thats the video loss message shows on the local screen.

Method of Operation:
ChannelSelect that channel what you want to set the dynamic detection region;
Alarm ModeSelect detection mode: Video Loss;
Recording ChannelThat means it needs to record video (multi selectable) when there is a video loss, when there is an alarm, the system will
automatic start to record in that channel. At the meantime, select the dynamic detection recording in theRecording Setting,
29

select the automatic recording inRecording Control;

Clear Time delayThat means after the dynamic, the recording will be stopped in some time delay, the time unit is in second, the range is 10-300;
Channel SwitcherWhen there is an alarm in Invert setting, the single video channel will switch in that selected to start record channel, the time of
channel switcher setting inLocal Displaysetting;
Alarm OutputWhen there is a video loss, start the linkage alarm output port to the external alarm device;
Time SliceCan set alarm output situation in two time slice, the time slice setting allow in repeat, the system according to the selected operational
context to press or operate in the current time slice. That is if there is a prompting message in the current time slice One, no in time
slice Two, then there is a prompting message in this time slice. Alarm output and prompting message selection invert, thats there is an
alarm output or prompting message in the selected time slice.

Video Cover
3Video
When some body malice to cover the lens of camera, or due to the lighting caused etc. lead to the video output display in monochrome attic, that is
unable to monitor scene video. Through the Video Cover alarm setting, it can effective to prevent phenomenon to happen, selectAlarm Outputand
Prompting Message.

Method of Operation:
ChannelSelect that channel you want to set the Dynamic Detection region;
Alarm ModeSelect detection mode: Cover Detection;
Recording ChannelThat means it needs to record video (multi selectable) when there is a video loss, when there is an alarm, the system will
automatic start to record in that channel. At the meantime, select the dynamic detection recording in theRecording Setting,
select the automatic recording inRecording Control;
Clear DelayThat means after the dynamic, the recording will be stopped in some time delay, the time unit is in second, the range is 10-300;
Channel SwitcherWhen there is an alarm in Invert setting, the single video channel will switch in that selected to start record channel, the time of
channel switcher setting inLocal Displaysetting;
Alarm OutputWhen there is a video loss, start the linkage alarm output port to the external alarm device;
Time SliceCan set alarm output situation in two time slice, the time slice setting allow in repeat, the system according to the selected operational
context to press or operate in the current time slice. That is if there is a prompting message in the current time slice One, no in time
slice Two, then there is a prompting message in this time slice. Alarm output and prompting message selection invert, thats there is an
alarm output or prompting message in the selected time slice.

Explanation:
30

1.During copy the setting what you did before, only copy the same setting what you wan to set. Thats say, the setting of video loss can not be ed to
paste to video cover after copiedFor example: the cover detection of Channel One only be copied to the others channels cover detection, can not be
copied into the other mode, by parity of reasoning.
2. In the default operation process, according to the different setting of channel and detection mode, only to detect the mode of current channel in
default operation. For example, default operation in cover detection menu, only set cover detection in default, the operation can not to set the other
detection mode.
3.Caution: you can select the short cut copy function to set the same channel, but in video detection setting, that can not be copy to use the
dynamic detection copy function region parameter, because there is not same in everyone channel video.

3.6
3.6..5 Alarm setting and alarm linkage recording
Details setting inMain MenuSystem SettingAlarm setting
User should separate to save after to everyone channel setting.

Alarm InputSelect corresponding alarm channel Number;

31

Device ModeSelect normal open/normal close (voltage output);

Channel SwitcherInvertsetting when there is an alarm event, due to select start to record the channel progress to single channel switching
display, select the switching setting time mode in the menuOutput Mode;
Recording channelSelect the require recording channel( repeat selectable), when there is an alarm event, the system will automatic to start that
channel to record. At the same time, select the dynamic detection recording inRecording Setting, select the automatic
recording inRecording Control;
Alarm OutputAlarm linkage output portrepeat selectable,when there is an alarm event, can be linked the corresponding alarm output device.
Clear Time Delay Select corresponding time delay5-300, the unit in second,after clear the external alarm, system automatic to delay the
corresponding time, then close the alarm and linkage output;
Prompting messageShow the prompting alarm message in the local DVR;
Time SliceCan set alarm output situation in two time slice, the time slice setting allow in repeat, the system according to the selected operational
context to press or operate in the current time slice. That is if there is a prompting message in the current time slice One, no in time
slice Two, then there is a prompting message in this time slice. Alarm output and prompting message selection invert, thats there is an
alarm output or prompting message in the selected time slice.

3.7 Backup recording file

The backup of Standalone DVR can be by SATA DVD-R/RW, USB DVD-R/RW, USB storage device, download through LAN etc.
First to introduce the USB storage backup operation, please find the details of it in the LAN client operation download backup through LAN.

3.7
.1 Detection device
3.7.1
The backup device are USB DVD-RW, pen drive, mobile hard disk drive etc. devices, it will show the detection device in the file backup device. And
show the total storage file capacity.
DetectionClick Detection button, if use the USB backup device in the USB port, then show the display device mode, partition in the above list box;
RemoveClick the Remove button, the installed mobile USB device will be uninstalled, the information of device will be clear in the list box;

32

.2 Backup operation
3.7
3.7.2
AddClick the backup dialog box Accession button, popping Recording Searching . Searching the DVR record file according the time, channel,
searching mode etc. information, searching information show in the dialog box. One or more file to add selection in one time, after process,
the file will be showed in the file backup diagram dialog box that the file need to backup.
DeleteYou can delete the one or more file in the file backup dialog box file list frame, the operation will be delete the content list only, and do not
delete file;
ClearClear the content list in the dialog box;
BackupTo backup the all file in the dialog box into the appointed backup device, before the backup operation, please confirm the selected backup
device, and it has enough space to backup.

During the backup operation, you can process to the other operation, after the backup furnish, it will automatic to show
the successful information
information.. The backup task cannot be canceled
canceled..
You can check the backup video file in your personal computer, the format of video file is: channel name + year/month/day/hour/minute/second.lvf

33

3.8 How to control PTZ

3.8.1 Method of connection
1connect RS-485 port of speed dome camera with he DVR PTZ port ;
2connect the video cable of speed dome with the DVR video input jet ;
3turn on the power of speed dome after connected mention above;

3.8.2 The method of PTZ control operation

1 the current video channel must switch to that channel camera will be controlled in the video channel;
2 finish setting the ID of speed dome;
3 confirm if it is correct or not from the cable A,B of speed dome to the cable A,B of DVR,please see the details of in chapter II: 2.1.2
4 process corresponding setting in DVR menu, details setting in Main MenuSystem SettingPTZ Setting.

34

ChannelSelect the connect channel of camera;

Protocol typeSelect the corresponding brand model protocol of speed dome camera;
AddressSetting the corresponding ID of speed dome camera;
Caution; the ID and protocol setting of DVR should fit for the speed dome camera, other wise, you can not control the speed dome camera
through RS-485 of DVR;
Baud rateSelect the corresponding baud rate of speed dome camera, can control to the corresponding channel PTZ and camera, the default
setting is 9600;
Data bitDefault is 8;
Stop bitDefault is 1;
examinationDefault is None;
Flow-controlDefault is None;
PTZ setting should be saved in everyone channel after setting.

3.8.3 PTZ control

To control the direction,speed,aperture,focus,Iris,cruise control,cruising setting,scan boundary,back light Compensation,
auto scanOf PTZ, coordinate with the direct key during setting;
There are two different kind of control interface in PTZ control, in preview mode, click right key of mouse in everyone channel, the shortcut menu will
popping the PTZ Control selection as follows.

Assist On/OffCan call the user-defined assist function, for example, lighting, windshield wiper etc;
Preset settingPreset point setting;
Call presetCall the preset point setting;
The function call display menu interface inMain menuPTZ control as follows;
The setting of pan driver step length through the inferior level slid bard of direction key to adjust. Major for neck rein operation, the step length is
more and more longer then the rotational speed follows;
Direct to single click the key of

of zoom, focus, IRIS, adjustment for zoom, definition, illumination.

35

The rotation of pan driver can supports 4 direction, there is Up, Down, Left and Right.
The Boundary Scansetting move to control the JIONT of speed dome, left margin setting, horizontal shifting move to the another point, to set the
right margin.
Auto Scanafter the running Auto scan, can control the it running in Auto Scan in the left and right boundary of speed dome camera.

3.9 3G module
or this function, first enter 3G DIAL (MAIN MENUADVANCE3G DIAL) and then start to setupas Figure1, the interface shows as Figure 2,
Figure 3.
3G DIAL have two modes with automatic and manual dialing, the operation follows as below.

Figure1
1. Automatic Dialing
Select the Automatic Dialing in the interface of Figure 2, fill the right information according to the operator where the 3G card belongs to and the 3G
referred guide, It includes IPS names, AP, dial-telephone, ID and password, the interface shows as Figure 3 (some IPS once be chosen, the other

36

relative information has been already done, so you neednt fill any more, click SAVE directly). Then click Save directly. After having detected the 3G
signal when DVR start, the system will dial up automatically.

Figure2
2. Manual Dialing
In the interface of figure 2, users would fill the right information in the menu bar as same as
Automatic dialing and click SAVE. Then click Dial-up after saving successfully (The referred information would be saved still after the DVR
restart, but you should click Dial-up again).
In these two modes, if the dial-up want success, first you should make sure that the 3G card is available. Since the 3G signal has been existed, the
related menu bar will show the correct IP address; if failed, system will popup a window to show the wrong information.

37

Figure3

38

Chapter Four Menu Operation Guide

4.1 Menu Navigation
Main Menu

First level
menu

Option remarks
To achieve the function of record file searching and playback, the listing of
searching according to the record mode, channel, timing, display the result situation
in listing, process the playback after the record file select ed.
R-Normal recording, A-Alarm recording, M-Motion detection recording

Play Back
Hard disk
drive
Log
System
information

version
Online user
System
setup
Encoding
setting

System Setting

The interface position of SATA hard disk drive, the total capacity, surplus capacity,
the start-stop recording time information of all hard disk drive and everyone.
Mode: read-write drive, read-only drive etc.
Display the log of system important event, and record the log appointed.
Display the property of system hardware, software version and the day of release
Check the information of on line user
System time, preservation mode of record, the DVR model etc. basic parameter
Encode mode, bit rate, quality parameter etc. setting of audio and video,

Recording
setting

The timing setting includes the timing recording, dynamic detection, external alarm
event;
The duration of everyday timing operation in one week( recording, receive external
alarm event, running dynamic detection), the every mode can be set in two different
kind of duration in everyday

PTZ setting

Parameter setting of PTZ

39

Network
setting
Alarm
setting

The parameter setting of network ID, video data transmission protocol etc. and the
function of PPPoE, DDNS.
The parameter setting of for external alarm output and record response.

Video
detection

The dynamic detection parameter setting of sensitivity, region and pre-processing

(alarm output and start recording) , video loss, blank screen detection etc.

Local
display

The parameter setting of output menu and monitoring switching

Caution: after the menu modify output attribute, the presentation will be go to take
effect after system reboot.
On or Off the channel recording

Recording
Control
The operation of Hard disk drive management, clear the data in hard disk drive;
Attention: modify property of hard disk drive, it will take a effect after the system
reboot.
Hard disk drive
management

PTZ Advanced Features

Alarm input, output function
Alarm control
User
account

The user management function

Exception
Advanced

System
upgrade

The item need to system maintenance setting, upgrade function

40

Options

Output
adjustment
Revert
default

Adjust the output parameter of VGA

According to select revert all or part of it into default delivery setting
Attention: user account setting is not the recovery function
Detection backup device
Listed the detected device, display the name, mode and capacity etc.
Backup the record file into the backup device.

File backup
Log off, turn off, reboot system operation

Turn off system

41

4.2 Menu Operation

Main menu interface introductions

The main menu function includes recording search, system information, system setting, recording control, hard disk drive management, alarm
control, Advanced Options, file backup, turn off system.

Explanation:
The all-following sub-menu setting should to take effect after save, otherwise, the setting invalid.
The checkbox be filled means that someone function sleeted, not be filled that means no select some one function.

4.2.1 Play Back

To achieve the recording search and playback function, the listed searching according to the recording mode(all, normal, alarm, dynamic detection),

42

channel, timing to search, please see the result listed table( please see chapter III 3.6.2)

4.2.2 System Information

Sub-system menu: hard disk drive information, log information, version information, on-line user.

4.2.2.1 Hard Disk Drive information

Display SATA hard disk drive interface status, mode, all hard disk drive and everyone hard disk drive interface position, total capacity, available
capacity etc. information.

4.2.2.2 Log Information

Show the system log, convenience of customers to see the login log.
The log message type can be divided into system operation, setting operation, data management, alarm event, recording operation, user

43

management, clear log file, file operation, setting the time slice of log what you want to search, directly to press Search button, system will display the
record log listed, press Page up or Page Down key to search the page turning operation.

The user who has the limits to rights can clear the date log in the system.

44

4.2.2.3 Version Information

Display the system hardware characteristic, software version and release date code etc information.

45

4.2.2.4 Online user

To see the LAN user information who log in the local DVR.

46

4.2.3 System Setting

Sub-Menu:System Setup,Encoding Setting,Recording Setting,PTZ Setting,Network Setting,Alarm Setting,Video Detection,
Local Displayetc. menu.
Please see the details ofRecording Setting,PTZ Setting,Alarm Setting,Video Detectionin Chapter III.
Attention: System setting must login by who hold the limits to rights

47

4.2.3.1 System Setup

System TimeBe used for modify the current system date and time of DVR, click the right hand side button to save the modification;
Date FormatSelect the date display format, including year/month/date, month/date/year, date/month/year etc;
Date separatorThere are three different kind of selection in it, / . , if you select . , then the system time will display as: 2008.07.20
Time FormatIncluding 24 hours and 12 hours;
Recording LengthCan setting the duration of everyone recording file, default is 60 minutes;
Identification NumberBe used for the situation that use one remote controller unit to over one DVR, only press the ID of remote controller unit on
it and the same corresponding DVR ID number, so, you can control the DVR;
Video SystemAccording to setup setting different system;
Menu Standing byPossible to set the menu standby-time 20-60second, 0 is not set the standby-time, if you Setup time, behind that time slice,
system automatic log off the current login user, if the user wants to operate menu, must to login again.

48

4.2.3.2 Encoding Setting

ChannelSelect channel Number;

Encoding TypeSelect audio & video then the recording file will be audio and video composite streaming, select video the streaming will be
video only;
Encoding SizeCIF/Half D1/D1;
Streaming ControlIncluding fixed bit rate, dynamic bit rate;
Encoding Quality6level video quality, theyre best, well, good, middle, worst, bad;
Code RateMax 1 Mbps, Min64Kbps;
Caution: when the code rate control set into dynamic bit rate, the default setting will be the upper limit in the Code Rate;
IP GapFrom 0 to 255 adjustment to continues, 0 means full I frame pattern encoding;
Frame Rate1fps to 25fps in PAL, or 30fps UNCAL;
DefaultChannel is the First channel, encoding type is video, resolution is CIF, streaming control is dynamic code rate, the code rate upper limit is
512Kbps, frame rate is 25fps;
Region OverrideInvert, press the appear setting button and cover type selection, enter the corresponding channel video, user can select any size
area to cover by mouse, anyone can not monitor or playback the area that has been set the cover area before;
49

Time OverlapandCharacter OverlapOverlap everyone channel encoding, there are time and channel title overlap, can set if you want to overlap
where the time and channel overlap in the encoding data, single click the setting button, drag the time title
or channel title to good place. If overlapped, the time and channel message will be display on video file
when you playback the record file.

4.2.3.3 Recording Setting

Please find the details of it at Chapter III 3.6 (Recording Operation).

4.2.3.4 PTZ Setting

Please find the details of it at Chapter III 3.8 (PTZ Control Operation).

4.2.3.5 Network Setting

50

IP Address Press Up/Down/Left/Right key or input the corresponding numeric key to modify the IP address parameter value ( the IP address
setting can be set in this setting item), then set the subnet mask and Default Gateway of the corresponding IP address;
Server PortThe general default is 7777, according to set the port under the user actual-need (remark: the server port 7777 preserve for UDP port,
please do not configure for the others);
HTTP PortGeneral default is 80;
Start MulticastStart Multicast network transmission modes, turn on the multicast function nee to set the corresponding multicast address and port;
Start DDNSVia DDNS server, it compatible with DYNDNS.ORG, NO-IP.ORG, support www.3322.org DDNS server;
Start PPPoEInput ISP ( Internet Service Provider) user name and password provided by PPPoE, reboot the system after save the setting. After
boot the DVR, system will automatic to setup the PPPoE network connection, after successful setting, the IP of IP addresswill be
modify automatically achieved the Internet dynamic IP address;
Operation: After PPPoE dialup successfully, please check the IP onIP Address, achieved the currently IP of DVR, then access the IP of DVR
through client.

51

4.2.3.6 Alarm Setting

Set alarm output port, Invert that means selected, press confirm button to save and exit, press cancel button to cancel and exit, manual to turn
On/Off the corresponding alarm output port.

4.2.3.7 Video Deteciton

Please find the details of it at Chapter III 3.6.4 (Video Detection).

4.2.3.8 Local Display

52

Channel NamePress the channel name modify button, enter the channel name menu, can modify the name of channel, during modify the channel
name in local, the WEB or client do not update the new channel name immediately follow the local DVR modify, need to open the
channel name to upgrade the channel name in WEB or client;
Window ColorAccording to the user favor to choose the background color and transparency;
TransparencyThere are three type for select: 25%, 50%, 75%;
Time Overlap
Channel Name OverlapStatus invertmarking, display the system date time and channel number in the monitoring video;
Start SwitchingInvert signify Start Switching function;
Switching GapSetting switching time, switching blanking time is 5-120 second, the switching video including single video and quad video. The 8
selected video frame signify the channel of switching in the single frame, the two selected switching video frame has four frame
video in one bar (1, 2,3,4 channel is First page, the others is Second page), the single and quad video frame can be switched at
the same time, if you selected 1,2,5,7 in single video frame, at the same time, sleeted quad video frame in the Second page, when
there is a switching, it will First to display in spacing 1,3,5,7, then display the quad video frame in the Second page.

53

4.2.4 Record Control

Please find the details of it at Chapter III 3.6.3 (Recording Setting).

4.2.5 Hard Disk Drive Management

Host hard disk drive setting management, enter Main MenuAdvanced OptionsHard disk drive management.
The following pictures show the properties current hard disk drive: type, status, total capacity, capacity, available capacity. The red cross mark
means there is not hard disk drive be connected to DVR, the yellow cross mark means there is a connected hard disk drive but it should be formatted,
green hook means the hard disk drive can be used. Operate to format the all data on the hard disk drive, Press Execution button to operation, after
finish, press confirm button and the system will presentation should reboot the system for confirm.

After formatted hard disk drive, the file format is ext3.

54

4.2.6 Alarm Control

Please find the details of it at Chapter III 3.6.5 (Alarm Setting and Alarm Linkage Recording).

4.2.7 Advanced Options

The Advanced Options including menu: hard disk drive management, user account, system maintenance, output regulation, Revert Default.

4.2.7.1 User Account

Management user account properties
The user name max character size is 8 character, the beginning and the end of the string is bland invalid, it can not be blank in the middle. The
legal character: letter, numeral, not allowed to use the other character symbol.
The user quantity max is 20pcs, the user can be added in user-defined, but the name of user can not be same repeat, the everyone user name can
be modified permission by admin, the other user name can permission modify the password themselves;
Modify password: permission to modify the password of user name, select user name, input the new password in the new password and confirm
the new password again. Press save button for confirm the password modification. The password can be set from 1-8pcs, the
password can not be in blank at the beginning and the end, the middle allow in blank. The legal character: letter, numeral, not
allowed to use the other character symbol.
Caution: The current password means the user logins
55

56

Add user: add user name in group and set the user permission control. Enter add user menu interface, input user name and password, select it
which group does belongs to, and select is it multiplex user or not. Multiplex means that user can be used at same time, the user name can be used
by some client at same time, means selected.

57

There are 3 user name admin,usrer,default in initialization, admin is the highest permission in delivery default setting, and the password is
666666,and the default user name is low permission user under delivery default setting, only can monitoring, playback, backup permission etc.
Defaultthis user is for system internal use, can not be deleted. When there locates no user login situation at local DVR, system will automatic to
log in under this default user name. user can according to modify the permission of this user account, accomplish the operation of some no need to
login. The other user who have account permission can modify the permission of Default, that is, user can use this function when there is not user login
DVR, For example, if you want to view some video channel when there is not user login, you can select the permission in that corresponding video
channel in Default account, scalable setting the others permission setting.

4.2.7.2 Exception

58

4.2.7.3 System Upgrade

Set the item can Autonomous Maintenance.
User can set the automatic reboot system themselves, the automatic reboot system need to set the date and time, (please make sure to set the
enable function in DVR where longtime no body to look for it. Finally to click the confirm button, otherwise, it will be canceled. User can copy the
upgrade firmware software into USB drive, click the start upgrade button, after finished upgrade successful, the system will reboot automatically.

59

4.2.7.4 Output Adjustment

Adjust the VGA output area, brightness, chromaticity and resolution.

60

4.2.7.5 Revert Default

System revert to the default setting status of Delivery (according to revert the details sleeted in the menu.
Attention: Menu color, language, date time format, video system, IP address, user account etc. can not be reverted.

4.2.8 File Backup

Please see the details of it at Chapter III 3.7 (The Backup Operation of Recording File ).

61

Chapter Five IE Preview

5.1 logging on interface
5.1.1 To input the IP address

62

Pretermission IP address is 192.168.0.19

63

64

5.2 System Settings

Point

, As the picture ,You can set up language directory,After all to save you set.

65

66

67

5.3 State control

In state control you can set reboot server, close server , remote to go up
Remote upgrade: let PC file load in the system
Log: to inquire sometime the servers action

68

69

70

Chapter Six Instruction for mobile monitor

Remark: only the mobile phone with Windows Mobile and Symbian operating system can
support the mobile phone monitor function.

1. DVR Setup
6.
6.1.
Please login MAIN MENU>>>>>NETWORK, setup MOBILE PORT:

2. Mobile phone setup

6.
6.2.
6.2.1 Windows Mobile Operating system
1Program download
Please copy the installation program whose name is amplayersetup.CAB from the
attached CD to your mobile phone, the default save path is My Documents.

71

2Click the program and start to install it, just select default path when it ask you to select
install path.

3Click install button to start to install.

4After installed, click the Naway icon to run the program.

72

5login the main interface as follow.

Channel: select the channel you want to monitor. When you select a channel, it will connect to DVR automatically.
Connect: press it to connect to DVR.
Setup: Press it to enter into the interface to config the parameters for mobile phone monitor.
Button definitionPTZ direction controlleftrightupdown;area selectzoom inzoom out;focus
;aperture;
snapshot.
73

Remark: Please make sure the parameters for PTZ in DVR is correct.
Snapshot default save path is: Program>>>Naway>>>> photo
6When you login for the first time, please setup the network parameters first, press setup to enter into the interface, as follow:

User name: can be blank.

Password: should be the same as IE.
Sever: the public IP or dynamoic domain name of DVR.
Sever port: this port is the mobile port you setup in DVR.
Channel: setup the default channel you want to check.
Please press OK after you finished setup.

74

7Display mode
Normal/Full screen
Remark: Click screen can switch the display mode between normal and full screen.
6.2.2 Symbian Operating system
1Please copy the install program whose name is amplayersetup.CAB from the attached CD to your mobile phone, the default save path is memory
card. As follow:

75

2Click the program to install it.

3You can select the install path you want as the follow picture .

76

4Please select continue when you got the follow window, and make sure your mobile phone can access to internet.

5you will got a message install finished after installed successful.

77

6Please find the Naway icon in Application and run it.

7when you login, you will find the window as follow:

78

Button definition
CH1 CH2 PTZ up left zoom in + focus + aperture +
CH3 CH4 PTZ down right zoom out focus aperture
Play/PauseFull screen/NormalSnapshotSetupExit
Remark: Snapshot default save path is: "C\Data\Images\
8When you login for the first time, please setup the network parameters first, press
Setup to enter into the interface, as follow:

79

Net Access point: Please select the network, GPRS/EDGE/3G

Sever address: the public IP or dynamic domain name of DVR.
Sever port: the sever port is the mobile port you setup in DVR.
User name: can be blank.
Password: the same as IE.
Channel: setup the default channel you want to check.
Please press Apply after you finished setup.

80

9Display mode
Normal/ Full screen
Remark: Click screen can switch the display mode between normal and full screen.
6.2.3 Android Operating system
1 Install the program
1. Copy the setup software P2PPlayer.apk to SD card.
2. Close USB, access to [Setting] [Applications ] [Application installer], and then the user can find the setup file:

81

Clue: Do you want to install this application?

82

Press Install button.

83

If the installation is finished, the picture is as below:

84

2. System explanation
P2PPlayer phone port mainly contain: video surveillance, channel switch, full screen magnify, PTZ control, focus, capture image, save as favorite and
exit function.
2.1 System main interface
After the installation, pressNaway icon in the application, see the below picture:

85

Open the main interface, see the below picture:

86

2.2 System setting interface

For the first time using or need to modify the parameters, press [Setting] button to access to the parameters setting.

87

Favorite:
The record which is saved can be found here;
UserName:
The user name which is set on DVR [phone surveillance];
Password:
The user password which is set on DVR [phone surveillance];
Server:
The public IP address and dynamic domain name of DVR.
Port:
The server port which is set on DVR [mobile phone].
ChannelCount:
Set the quantity of the channel.
Default channel:
Set the default channel which will do the video surveillance.
88

RecordName:
Save the name of the record.
After the setting press [Save] then it will go to the favorite folder. Next time you can find the record in the file.
After the setting press [setting] and back to the front interface.
After the setting, press connect button on the main interface and then it will connect the server. In this interface it can also switch the channel, full
screen magnify, PTZ control, focus, phone capture and full screen display.

The detail information is as below:

Press this icon to connect the server
: Press this icon to open the setting interface
: Switch the channel function.
89

It can control the PTZ move up, down, left and right.
: It can operate the zoom, focus and iris.
Press it to enter into full screen mode, press it again back to the common mode.
Capture the image function.
3 Familiar questions and their answers
1Why it can not connect the server?
a: Check the setting page layout, server, port, user name, password is right or not.
b: Check the internet; check if the mobile phone is connected with the internet.
2After enter into the main interface, why the user can not control the PTZ?
a: Check if the channel has the PTZ.
b: The reflection of the PTZ is too slow, please wait for a moment.
6.2.4 Iphone Operating system
I. The installation of Aplayer

1. Open the icon

, the below image will appear:

90

Image 1
2. Click

Input naway in the searching bar, click

the below

91

image will appear:

Image 2
3. Then the image 3 will appear:

92

Image 3
4. After click the FREE on image 3, the image 4 will appear, click INSTALLoption on image 4, and the image 5 will appear. Input the password of
Apple account on image 5, then click ok, image 6 will appear.

93

Image 4

image 5

Image 6

94

5 After

change to

on image 6, it means it is downloading

Aplayer software and set it automatically. After the process bar

of

is full, it means it finishes the installation.

6After finishing the installation, the interface of the mobile phone will appear Naway icon, like the image 7.

Image7
II. How to use APlayer
1. Click Aplayer icon, open the software. The introduction of the interface function is as below:
95

 PTZ direction key (up, down, left and right)

PTZ lens control (magnify+, reduce-),(focus+, focus-), (iris+, iris-)
Choose the monitor channel
The function of the key from left to right: Pause, capture, full screen mode,next monitor option, monitor connection setting.
Exit, the middle key of the phone
2. Set the monitor point: it is the same setting with Symbian and Windows.

96

IP address of the monitor point

Network port
User name
Password

97

Chapter Seven FAQ (Frequently Asked Questions)

01Why the DVR did not run after connect the power supply?
Please check the power switch turn on or off at the rear panel of DVR.
Please check if the turn on DVR operation correct or not?
If you select the adaptor +12V, 5A or above? (8ch 5A, 16ch 220V 200W)
02Still stop over on the boot-strap frame?
Physical damaged in hard disk drive
Boot manager abnormal.
03Why does appear the boot running too slow?
There are too much capacity data in hard disk drive, the system will automatic search the data when the system boot up, caused the boot
running slow.
The hard disk drive error will cause the system research the data repeatedly, caused the boot running slow.
04Why does the system reboot repeatedly?
Check the hard disk drive, if there is not the FAT32 formatted in it or the problem in it and caused the DVR reboot;
Please check the power supply of DVR, if you installed a lot of hard disk drive, it may be reboot repeatedly underpower;
Please pull up the network cable, then to check the DVR can work normally or not, being the catastrophe failure in network,
it will cause the DVR reboot repeatedly;
05Why does the system halted of DVR during the playback and search the video file information in progress?
Please check if you install the hard disk drive or if the drive is ok or not? Please replace the good one for it soon;
If the ambient temperature on the high side or not?

98

Is there any heaven current installation surrounding and external video device, heavy current surging video cable, caused the DVR can not
work properly and the system halted;
06Firmware upgrade failure?
U drive is not good compatible with the DVR, cause the DVR can not detected it, suggested to try one or two more different kind of U drive in
the market;
USB interface is not good;
The voltage hunting fearfulness during the system firmware upgrade in progress;
07Why the display color is black and white in TV and VGA monitor?
Check the video system is it matching the video input, DVR, TV or VGA monitor, if there is not on all fours, please set the video system mode in
auto automatic recognition;
08Why does nothing display on the TV or VGA monitor?
please make sure if the power supply of TV or VGA monitor turn on or not; if the illumination located in the lowest status?
if the video connected with TV or VGA monitor properly? Check if there is any video signal input? And make sure the line faulty or not?
09Why does the video like water wave, to appear obstruction distortion?
if there is short circuit, open circuit or insufficient solder and connection failure of video cable?
If the video cable obstruction by high voltage interference, please separate the video and high voltage in linkup cabling, at the meantime,
please select the better quality, shield video cable for the project;
In the whole system, only select the central point to grounding, please do not multi port to grounding, then, cause the common mode
obstruction, please connect the screw in DVR rear panel to grounding;
Check if there is the become old problem in the camera or TV monitor and cable?
10Why do the color of live video and record video data distortion?
Make sure the input and output video parameter of main menu setting correct;
Make sure the connection is correct;
11Why does the video skew became deformed, color cast?
Make sure the VGA cable and DVR be connected with grounding properly;
99

 The DVR working atmosphere temperature high, or no good in radiating, cause the VGA chipset working exceptional, or the mention circuit
parameter is abnormal;
12Why does the record video playback in mosaic under local DVR?
The recording parameter setting is too low cause the record video quality overall down, sometime appears to mosaic;
The record video file locates where there is a bad sector in a hard disk drive, it will cause the mosaic raising;

100

Postscript
Product parameter Table
4CH
Compress
standard

8CH

16CH

H.264 baseline profile@L3.1

Video in

BNC1.0Vp-p/75

BNC1.0Vp-p/75

BNC1.0Vp-p/75

Video out

1 BNC(1.0Vp-p,75),1VGA.

1 BNC(1.0Vp-p,75),1VGA.

1 BNC(1.0Vp-p,75),1VGA.

Picture standard

PAL(720576) NTSC(720480)

PAL(720576) NTSC(720480)

PAL(720576) NTSC(720480)

resolution ratio

1024x768/800x600

1024x768/800x600

1280x1024/1024x768

D1/HD1/CIF

D1/HD1/CIF

D1/HD1/CIF

Record play

1/4CH

1/4/8CH

1/4/8/16CH

Roll rate

PAL:1~25 roll/SNTSC:1~30 roll/S

PAL:1~25 roll/SNTSC:1~30 roll/S

PAL:1~25 roll/SNTSC:1~30 roll/S

Audio in

RCA1CH/4CH

RCA1CH/8CH

RCA4CH/16CH

Audio out

BNC1

BNC1

RCA1

Audio encoded

ADPCM

ADPCM

ADPCM

32Kbps

32Kbps

32Kbps

Alarm In

4CH

4CH

4CH

Alarm Out

1CH

1CH

1CH

Manual recordmotionrecord and externa

Manual recordmotionrecord and externa

Manual recordmotionrecord and externa

alarm record

alarm record

alarm record

RecordP layInternet

RecordP layInternet

RecordP layInternet

Record encoded

Audio encoded
rate

Record mode
Mult mode

101

Network interface
Mobil platform
RS485

RJ45(10M/100M)

RJ45(10M/100M)

RJ45(10M/100M)

Naway.CABsymbian v3symbian v5Naway-AndroidiphoneBlackberry

PTZ control

PTZ control

PTZ control

RS4851USB2.02

RS4851USB2.02

RS4851USB2.02

Hard Disc

1or2SATAmaximum 2T

1or2SATAmaximum 2T

1or2SATAmaximum 2T

USB interface

Usb mouseUsb disc backup

Usb mouseUsb disc backup

Usb mouseUsb disc backup

Remote control

Yes

Yes

Yes

Power adapter

12V/2.5A DC

12V/2.5A DC

12V/4A DC

0+60

0+60

0+60

Working humidity

10%90%

10%90%

10%90%

Product sizemm
mm

330x250x50mm

330x250x50mm

380x300x55mm

2.6without disc

2.6without disc

3.0without disc

Communication
port

Working
temperature

Product weight
Kg
Kg
Kg

AttentionPower adapter according to the number of hard disk

102

PRODUCT WARRANTY CARD

All the products sold are covered by 12months warranty from the date of invoice.
Warranty instructions
1. Please contact us when the product is caused by its own fault within 1year warranty.
2. Please mail us your written warranty card as soon as possible after purchasing our products so that we can repair or replace this product to its
original operation condition. Or the company will not deal with it.
3. Please write the truth on the warranty card.
4. Paid for repairing as follows:
A: Equipment failure caused by human operation
B: Equipment failure caused by not conforming to the using environment
C: No warranty card
D: Warranty expired
Product model
Purchasing time
Telephone

Product serial number

User name

Contact person

Please keep the warranty card for the better service.

Note
NotePlease

103

104