Sony HBD Tz130
Sony HBD Tz130
Sony HBD Tz130
SERVICE MANUAL
US Model
Canadian Model
E Model
Australian Model
Chinese Model
This system incorporates with Dolby* Digital and Dolby Pro Logic
adaptive matrix surround decoders.
* Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks of
Dolby Laboratories.
This system incorporates High-Definition Multimedia Interface
(HDMI) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
BRAVIA is a trademark of Sony Corporation.
MPEG Layer-3 audio coding technology and patents licensed from
Fraunhofer IIS and Thomson.
Windows Media is a registered trademark of Microsoft Corporation in
the United States and/or other countries.
NEW
CDM85
KHM-313
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS
for the U.S. models
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(FTC)
Front L + Front R With 3 ohms loads,
both channels driven,
from 180 - 15,000 Hz;
rated 23 watts per
channel minimum
RMS power, with no
more than 1% total
harmonic distortion
from 250 milli watts to
rated output.
Amplifier Section
POWER OUTPUT (rated):
Front L + Front R
32 W + 32 W (at 3
ohms, 1 kHz, 1% THD)
POWER OUTPUT (reference):
Front L/Front R/
Surround L/Surround
R: 43 watts (per channel
at 3 ohms, 1 kHz)
Center: 89 watts (per
channel at 6 ohms, 1 kHz)
Subwoofer: 89 watts (at
6 ohms, 100 Hz)
Inputs
TV/CABLE :
Pin jack
CD/DVD System
Laser Diode Properties
Emission Duration:
Continuous
Laser Output*: Less
than 1,000 W
* This output is the value measurement at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm
aperture.
USB Section
(USB) port:
Maximum current:
500 mA
Continued on next page
DVD RECEIVER
9-889-971-03
2011A04-1
2011.01
Sony Corporation
Published by Sony Techno Create Corporation
HBD-TZ130
Ver. 1.2
Tuner Section
System
PLL quartz-locked
digital synthesizer
Tuning range
North American and Brazilian models:
87.5 MHz - 108.0 MHz
(100 kHz step)
Other models:
87.5 MHz - 108.0 MHz
(50 kHz step)
Antenna (aerial) terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Video Section
Outputs
General
Power requirements
North American models:
120 V AC, 60 Hz
Argentine models:
220 V - 240 V AC,
50/60 Hz
Brazilian models:
127 V - 240 V AC,
50/60 Hz
Latin American models:
110 V - 240 V AC,
50/60 Hz
Other models:
220 V - 240 V AC,
50/60 Hz
Power consumption
On: 67 W
Standby: <1 W*
* Valid when the system is in the following status:
[Control for HDMI] is set to [Off].
Dimensions (approx.) 360 mm 56 mm
342 mm (14 1/4 in
2 1/4 in 13 1/2 in) (w/h/d)
incl. projecting parts
Mass (approx.)
2.6 kg (5 lb. 12 oz.)
Design and specifications are subject to
change without notice.
AC
voltmeter
(0.75 V)
0.15 F
Earth Ground
HBD-TZ130
Ver. 1.2
MODEL IDENTIFICATION
Back Cabinet
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation exposure.
Parts No.
Model
Part No.
SP model
GSE200276-0001
AUS model
GSE200276-0004
TH model
GSE200276-0007
CH model
GSE200276-0008
E32 model
GSE200276-0009
US model
GSE200276-0011
CND model
GSE200276-0012
GSE200276-0013
E12 model
GSE200276-0015
AR model
GSE200276-0017
BR model
GSE200276-0018
Abbreviation
AR
: Argentina model
AUS : Australian model
BR
: Brazilian model
CH
: Chinese model
CND : Canadian model
E3
: 240V AC area in E model
E12 : 220 240V AC area in E model
E32 : 110 240V AC area in E model
SAF : South African model
SP
: Singapore model
TH
: Thai model
HBD-TZ130
TABLE OF CONTENTS
1.
2.
DISASSEMBLY
2-1.
2-2.
2-3.
2-4.
2-5.
2-6.
2-7.
2-8.
2-9.
3.
DIAGRAMS
9
10
10
11
11
12
12
13
13
3-4.
3-5.
3-6.
3-7.
3-8.
3-9.
4.
EXPLODED VIEWS
4-1.
4-2.
4-3.
4-4.
18
19
20
21
22
23
24
25
26
27
HBD-TZ130
SECTION 1
SERVICING NOTES
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference generated by
the charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
How to open the disc tray when power switch turns off
Insert a tapering driver into the aperture of the unit bottom, and
slide it in the direction of the arrow.
Insert a screwdriver from between the front panel and
the chassis and slide the rod in the direction of the arrow.
disc tray
HBD-TZ130
800:/2W
USB wire
USB wire
HBD-TZ130
Version display
Confirmation procedure of version only
1. Press the [?/1] button to turn the set on.
2. Press the [EJECT] button. (State of Tray open)
3. After press the STOP button, the DISPLAY button press.
4. The version information appears to the TV.
Model No.
DAV-TZ130 CEL
Release : 2010.08.26C
MPEG : 2.15.23
Region :
2
MCU : 2.15.24
HdcpKey : Yes
OK
HBD-TZ130
SECTION 2
DISASSEMBLY
2-1.
TOP COVER
(Page 9)
2-2.
DOOR
(Page 10)
2-3.
2-8.
2-4.
CONTROL BOARD,
STANDBY BOARD
(Page 11)
2-9.
OPTICAL PICK-UP
(Page 13)
2-5.
USB BOARD
(Page 11)
2-6.
MAIN BOARD
(Page 12)
2-7.
POWER BOARD
(Page 12)
HBD-TZ130
2-1.
TOP COVER
2 screw
(case screw)
3 four screws
(+BVTT 3 u6)
4
1 screw
(case screw)
7 top cover
HBD-TZ130
2-2.
DOOR
3 door
2
disc tray
2-3.
2 screw
(+BVTT 3 u6)
8 claw
7 two claws
9
6 two claws
4 claw
3 screw
(+BVTT 3 u6)
5 three claws
10
HBD-TZ130
2-4.
9 STANDBY board
8 three screws
(+BVTP 2.6 (3CR))
3 grounding spring
2 screw
(+BVTP 2.6 (3CR))
4 two screws
(+BVTP 2.6 (3CR))
5 grounding spring
6 four screws
(+BVTP 2.6 (3CR))
7 CONTROL board
1 volume knob
2-5.
USB BOARD
1 CON103 (5P)
2 screw
(+BVTT 3 u7)
3 USB board
USB wire
USB wire
11
HBD-TZ130
2-6.
MAIN BOARD
6 wire (flat type) (24 core)
(CON100)
8 CON103 (5P)
0 three screws
(+BVTT 3 u7)
5 CON102 (6P)
9 four screws
(+BVTT 3 u7)
1 CN902 (2P)
qs two screws
(+P 3 u10)
qd screw
(+BVTT 3 u6)
qf two screws
(+P 3 u10)
2-7.
POWER BOARD
4 two screws
(+BVTT 3 u7)
5 three screws
(+BVTT 3 u7)
7 POWER board
3 CN901 (11P)
6 spacer
1 CN900 (2P)
2 CN902 (2P)
12
HBD-TZ130
2-8.
2-9.
OPTICAL PICK-UP
2 FFC holder
3 two screws
(PTP 2 u 5)
4 two screws
(PTP 2 u 5)
5 two insulators
6 two insulators
7 optical pick-up
(KHM-313)
1 two claws
13
HBD-TZ130
SECTION 3
DIAGRAMS
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
For Printed Wiring Boards.
Note:
Note:
All capacitors are in F unless otherwise noted. (p: pF) 50
WV or less are not indicated except for electrolytics and
tantalums.
All resistors are in and 1/4 W or less unless otherwise
specified.
Caution:
Pattern face side:
(SIDE B)
Parts face side:
(SIDE A)
14
Note:
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part
number specified.
Note:
Les composants identifis
par une marque 0 sont
critiques pour la scurit.
Ne les remplacer que par
une pice portant le numro spcifi.
HBD-TZ130
3-1.
BLOCK DIAGRAM
STM8/64K
48Pin
(VIO=3.3V)
Digital Audio
Processor
TSA5508B
(VIO=3.3V)
HBD-TZ130
15
15
HBD-TZ130
3-2.
14
13
12
11
10
1
A
HBD-TZ130
16
16
HBD-TZ130
3-3.
HBD-TZ130
17
17
10
11
12
13
14
HBD-TZ130
3-4.
HBD-TZ130
18
18
10
11
12
13
14
HBD-TZ130
3-5.
HBD-TZ130
19
19
10
11
12
13
HBD-TZ130
3-6.
1
A
HBD-TZ130
20
20
10
11
12
13
14
HBD-TZ130
3-7.
1
A
CONTROL BOARD
USB BOARD
STANDBY BOARD
HBD-TZ130
21
21
10
11
12
HBD-TZ130
3-8.
1
A
HBD-TZ130
10
22
22
11
12
13
14
HBD-TZ130
3-9.
1
A
POWER BOARD
HBD-TZ130
23
23
10
HBD-TZ130
SECTION 4
EXPLODED VIEWS
MEMO
Note:
Items marked * are not stocked since
they are seldom required for routine service. Some delay should be anticipated
when ordering these items.
The mechanical parts with no reference
number in the exploded views are not supplied.
Accessories are given in the last of the
electrical parts list.
Abbreviation
AR
: Argentina model
AUS : Australian model
BR
: Brazilian model
CH
: Chinese model
CND : Canadian model
E3
: 240V AC area in E model
E12 : 220 240V AC area in E model
E32 : 110 240V AC area in E model
4-1.
SAF
SP
TH
OVERALL SECTION
4
3
chassis section
1
2
Ref. No.
1
2
HBD-TZ130
24
24
Part No.
Description
9-885-148-07
9-885-144-64
DOOR
+BVTT 3X6 BZN3
Remark
Ref. No.
3
4
Part No.
Description
9-885-149-85
9-885-148-14
CASE SCREW
TOP COVER
Remark
HBD-TZ130
Ver. 1.2
4-2.
56
54
not supplied
55
54
not supplied
not supplied
(STANDBY board)
54
54
not supplied
(USB board)
not supplied
(CONTROL board)
53
52
51
Note: If the wire (flat type) was replaced, fold it some as the
wire (flat type) before replacement.
Ref. No.
51
52
52
53
Part No.
Description
9-885-148-08
9-885-149-61
9-885-149-62
9-885-150-24
VOLUME KNOB
FRONT CABINET ASSY (EXCEPT US)
FRONT CABINET ASSY (US)
VFD PCB ASM
Remark
Ref. No.
54
55
56
Part No.
Description
3-087-053-01
9-885-144-66
9-885-150-27
+BVTP2.6 (3CR)
+BVTT 3X7 CZN3 (POINT CIRCLE)
FLEXIBLE CABLE (15 CORE)
Remark
25
HBD-TZ130
Ver. 1.2
4-3.
CHASSIS SECTION
111
not supplied
102
102
104
DVD section
102
106
105
not supplied
#2
#1
105
#2
not supplied
107
108
109
103
not supplied
102
not supplied
F900
102
101
101
110
not supplied
Note: If the wire (flat type) was replaced, fold it some as the
wire (flat type) before replacement.
Ref. No.
Part No.
Description
Part No.
Description
101
102
103
9 104
9 104
9-885-144-39
9-885-144-66
9-885-150-26
A-1805-849-A
A-1805-850-A
FOOT
+BVTT 3X7 CZN3 (POINT CIRCLE)
FLEXIBLE CABLE (5 CORE)
MAIN PCB ASSY (U2) (US)
MAIN PCB ASSY (CA2) (CND)
0
0
0
0
0
106
106
106
106
106
9-885-150-13
9-885-150-14
9-885-150-16
9-885-150-18
9-885-150-20
AC CORD (AUS)
AC CORD (TH)
AC CORD (CH)
AC CORD (US, CND)
AC CORD (AR)
9
9
9
9
9
104
104
104
104
104
A-1805-854-A
A-1805-855-A
A-1805-856-A
A-1805-857-A
A-1805-859-A
0 106
0 107
108
108
108
9-885-150-21
9-885-151-52
1-693-780-21
1-693-781-21
1-693-788-21
AC CORD (BR)
AC PLUG ADAPTOR FOR E12 (E12)
TUNER (FM) (E3, E12, E32, AUS, AR, SP, TH)
TUNER (FM) (US, CND, BR)
TUNER (FM) (CH, SAF)
9
9
9
9
9
104
104
104
104
104
A-1805-860-A
A-1805-861-A
A-1805-862-A
A-1805-864-A
A-1805-865-A
109
110
111
0 F900
#1
9-885-150-28
9-885-150-22
9-885-152-89
9-885-150-11
7-685-646-71
105
0 106
9-885-144-64
9-885-150-12
#2
7-685-647-79
26
Remark
Ref. No.
Remark
HBD-TZ130
Ver. 1.1
4-4.
not supplied
151
155
not supplied
not supplied
not supplied
not supplied
not supplied
152
153
not supplied
not supplied
153
153
not supplied
154
153
Note: If the wire (flat type) was replaced, fold it some as the
wire (flat type) before replacement.
Ref. No.
0 151
0 152
153
Part No.
Description
Remark
A-1749-923-A
8-820-321-05
4-674-137-11
Ref. No.
154
155
Part No.
Description
9-885-150-25
3-088-371-01
Remark
27
HBD-TZ130
REVISION HISTORY
Checking the version allows you to jump to the revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Ver.
Date
Description of Revision
1.0
2010.09
New
1.1
2010.10
1.2
2011.01
Addition of US model.
(SMR-10046)