TOLCO Pipe Hangers

Pipe Hangers
Pipe Hangers
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical
adjustment and limited movement in the piping system.
Materials
Carbon Steel, Malleable Iron and AISI Type 304 & 316 Stainless Steel are used in the manufacturing of pipe
hangers. Other materials are available.
Finishes
The standard finishes for mechanical supports are plain steel (oil coated) sometimes referred to as black,
Electro-Galvanized Zinc (ASTM B633 SC3), Pre-Galvanized (ASTM A653 G90), Hot-Dip Galvanized After Fabrication
(ASTM A123), Red Primer, Plastic Coating, DURA-GREEN, DURA-COPPER and other special coatings are
available upon request.
Note: Due to the design of some products, (threads, connecting hardware, swivels, etc.) items may or may not
be uniformly coated with special finishes i.e. Hot-Dip Galvanized, DURA-GREEN, DURA-COPPER, PVC etc. In some
cases, the hanger itself may be coated, however, the hardware may be supplied Electro-Plated, DURA-COPPER
Painted or Stainless Steel. Consult B-Line Systems for availability.
Approvals (as noted)

Items in this section are Underwriters Laboratories Listed, Factory Mutual Approved, and comply with Federal
Specification WW-H-171E & A-A-1192A or Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58.
Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development
(OSHPD)
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
47
Pipe Hangers & Supports
Pipe Hangers
Fig. 1CBS - Clevis Pipe Spacer (Cooper B-Line B3100PS)
Size Range: Size 1" (25mm) thru 20" (500mm) clevis hanger
Material: Steel
Component of State of
California OSHPD Approved
Seismic Restraints System
Function: Used as a spacer at a seismic brace location to

keep clevis hanger from collapsing during seismic event.
Approvals: Included in our Seismic Restraints Catalog
approved by the State of California Office of Statewide
Health Planning and Development (OSHPD). For additional
load, spacing and placement information relating to OSHPD
projects, please refer to the Seismic Restraint Systems
Guidelines.
Installation Note: Fig. 1CBS fits easily over the cross bolt
and attaches by pinching tabs down.
Finish: Pre-Galvanized. Contact B-Line for alternative
finishes and materials.
Order By: Part number and finish.
1CBS-1
Approx. Wt./100
in.
(mm)
lbs.
(kg)
(25)
3.2
(1.4)
1CBS-11/4
11/4
(32)
4.1
(1.8)
1CBS-11/2
11/2
(40)
4.8
(2.2)
(50)
9.4
(4.2)
21/2
(65)
11.4
(5.2)
1CBS-2
1CBS-21/2
1CBS-3
(75)
13.9
(6.8)
31/2
(90)
16.0
(7.2)
1CBS-4
(100)
18.0
(8.1)
1CBS-5
(125)
27.3
(12.4)
1CBS-6
(150)
32.5
(14.7)
1CBS-8
(200)
42.5
(19.2)
1CBS-10
10
(250)
72.7
(32.9)
1CBS-12
12
(300)
86.3
(39.1)
1CBS-14
14
(350)
157.6
(71.5)
1CBS-16
16
(400)
183.7
(83.3)
1CBS-18
18
(450)
224.6
(101.9)
1CBS-20
20
(500)
254.0
(115.2)
1CBS-31/2
Pipe Hangers
Pipe Size
Part No.
48
Pipe Hangers
B3100 - Standard Clevis Hanger (TOLCO Fig.1)
SLIDE-RITE Clevis Hanger Features

Pipe will not pinch when installing.
15 swing in either direction allows pipe to easily
feed thru.
Engineered design aligns bolt holes for quicker
overhead installation.
A
(Rod Size)
Hanger Rod Not
Included
*SLIDE-RITE Clevis Hanger

design, as shown below, for
sizes 2, 21/2, 3, 4, 5 & 6.
B
Bottom of pipe to top of hanger.
C
Center of pipe to top of hanger.
D
Rod Take-Out
Center of pipe to bottom of
hanger rod.
E
Minimum thread length of
hanger rod
Pat. No. 5,848,770

5,924,655
F
Adjustment
Top of cross bolt to bottom of hanger
rod nut inside the hanger.
Nominal Pipe Size

Part No.
in.
B3100-1/2
1/2"
B3100-3/4
3/4"
(mm)
Rod Size A
Std
NFPA**
B
in.
C
(mm)
in.
(54.0)
13/4"
D
(mm)
in.
(mm)
(44.4)
15/16"
(23.8)
(28.6)
Pipe Hangers
(15)
3/8"-16
3/8"-16
21/8"
(20)
3/8"-16
3/8"-16
21/2"
(63.5)
2"
(50.8)
11/8"
3/8"-16
27/8"
(73.0)
21/4"
(57.1)
13/8"
(34.9)
31/2"
(88.9)
211/16"
(68.2)
113/16"
(46.0)
(101.6)`
31/16"
(77.8)
21/4"
(57.1)
(63.5)
B3100-1
1"
(25)
3/8"-16
B3100-11/4
11/4"
(32)
3/8"-16
3/8"-16
B3100-11/2
11/2"
(40)
3/8"-16
3/8"-16
4"
3/8"-16
41/2"
(50)
3/8"-16
(114.3)
35/16"
(84.1)
21/2"
21/2"
(65)
1/2"-13
3/8"-16
53/8"
(136.5)
315/16"
(100.0)
31/16"
(77.8)
B3100-3 *
3"
(80)
1/2"-13
3/8"-16
61/2"
(165.1)
43/4"
(120.6)
315/16"
(100.0)
B3100-31/2
31/2"
(90)
1/2"-13
3/8"-16
71/4"
(184.1)
51/4"
(133.3)
41/16"
(103.2)
(100)
5/8"-11
3/8"-16
73/4"
(196.8)
51/2"
(139.7)
51/2"
(139.7)
(125)
5/8"-11
1/2"-13
83/4"
(222.2)
61/8"
(155.6)
6"
(152.4)
1/2"-13
105/16"
B3100-2 *
B3100-21/2
2"
*
B3100-4 *
B3100-5 *
4"
5"
B3100-6 *
6"
(150)
3/4"-10
(261.9)
615/16"
(176.2)
7"
(177.8)
B3100-8
8"
(200)
3/4"-10
1/2"-13
123/4"
(323.8)
87/16"
(214.3)
71/8"
(181.0)
B3100-10
10"
(250)
7/8"-9
5/8"-11
151/8"
(384.2)
93/4"
(247.6)
83/8"
(212.7)
(300)
7/8"-9
5/8"-11
171/2"
(444.5)
111/8"
(282.6)
911/16"
(246.1)
(269.9)
B3100-12
12"
B3100-14
14"
(350)
1"-8
--
193/8"
(492.1)
123/8"
(314.3)
105/8"
B3100-16
16"
(400)
1"-8
--
213/8"
(542.9)
133/8"
(339.7)
119/16"
(293.7)
B3100-18
18"
(450)
1"-8
--
25"
(635.0)
16"
(406.4)
143/16"
(360.3)
(500)
11/4"-7
--
283/4"
(730.2)
173/4"
(450.8)
165/8"
(422.3)
(600)
11/4"-7
--
323/4"
(831.8)
193/4"
(501.6)
185/8"
(473.1)
--
3915/16"
(1014.4)
2415/16"
(633.4)
223/4"
(577.8)
--
46"
(1168.4)
28"
(711.2)
25"
(635.0)
B3100-20
B3100-24
20"
24"
B3100-30
30"
(750)
11/4"-7
B3100-36
36"
(900)
11/4"-7
49
Pipe Hangers
B3100 - Standard Clevis Hanger (TOLCO Fig.1)

Size Range:
/2 (15mm) to 36 (900mm)
Material: Steel
Function: Recommended for the suspension of non-insulated pipe or insulated pipe with a B3151 shield.
Note: When an oversized clevis is used, a pipe spacer should be placed over the cross bolt to assure that the
lower U-strap will not move in on the bolt. When attaching seismic bracing to the clevis hangers, a B3100PS
(cross bolt spacer) must be installed. See Seismic Restraints Approval Guidelines.
Order pipe sleeves Fig. 1CBS-(pipe size) separately.
Approvals: Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide
Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to
OSHPD projects, please refer to the B-Line/TOLCO Seismic Restraint Systems Guidelines. Underwriter's
Laboratories Listed in the USA (UL) and Canada (cUL) for sizes 3/4 (20mm) thru 12" (300mm). Factory Mutual
Engineering Approved (FM) for 3/4 (20mm) thru 12 (300mm) pipe. Conforms to Federal Specification WW-H-171E &
A-A-1192A, Type 1 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 1. Also available to
accommodate rod schedule per per National Fire Protection Association (NFPA) Pamphlet 13.
Maximum Temperature: 650F (343C).
Standard Finish: Plain, Electro-Galvanized, DURA-GREEN, or Hot-Dip Galvanized
also available in Stainless Steel
For AWWA - Ductile Iron Clevis Hangers, see B3102, page 51.
** Note: Do not use the dimensions shown in the B3100 chart for NFPA hanger sizes.
Contact B-Line for NFPA rod sizing on 1/2 (15mm) thru 12 (300mm) pipe.
Part numbers will be 1NFPA-pipe size.
in.
Adjustment F
Design Load
Approx. Wt./100
(mm)
in.
(mm)
Lbs.
(kN)
Lbs.
(kg)
(63.5)
7/16"
(11.1)
730
(3.25)
25
(11.3)
B3100-1/2
21/2"
B3100-3/4
21/2"
(63.5)
1/2"
(12.7)
730
(3.25)
29
(13.1)
B3100-1
21/2"
(63.5)
5/8"
(15.9)
730
(3.25)
35
(15.9)
B3100-11/4
21/2"
(63.5)
7/8"
(22.2)
730
(3.25)
40
(18.1)
B3100-11/2
21/2"
(63.5)
13/16"
(30.2)
730
(3.25)
42
(19.0)
B3100-2 *
21/2"
(63.5)
15/8"
(41.3)
730
(3.25)
52
(23.6)
B3100-21/2
21/2"
(63.5)
2"
(50.8)
1350
(6.00)
90
(40.8)
B3100-3 *
21/2"
(63.5)
2"
(50.8)
1350
(6.00)
110
(49.9)
B3100-31/2
21/2"
(63.5)
2"
(50.8)
1350
(6.00)
142
(64.4)
B3100-4 *
21/2"
(63.5)
2"
(50.8)
1430
(6.36)
132
(59.9)
B3100-5 *
21/2"
(63.5)
2"
(50.8)
1430
(6.36)
215
(97.5)
B3100-6 *
3"
(76.2)
2"
(50.8)
1940
(8.63)
320
(145.1)
B3100-8
31/2"
(88.9)
25/16"
(58.7)
2000
(8.89)
485
(220.0)
B3100-10
31/2"
(88.9)
25/16"
(58.7)
3600
(16.01)
846
(383.7)
B3100-12
31/2"
(88.9)
25/8"
(66.7)
3800
(16.90)
1083
(491.2)
B3100-14
4"
(101.6)
27/8"
(73.0)
4200
(18.68)
1432
(649.5)
B3100-16
4"
(101.6)
211/16"
(68.3)
4600
(20.46)
2200
(997.9)
B3100-18
41/2"
(114.3)
315/16"
(100.0)
4800
(21.35)
2500
(1134.0)
(127.0)
53/8"
(136.5)
4800
(21.35)
4400
(1995.8)
B3100-20
5"
B3100-24
5"
(127.0)
53/8"
(136.5)
4800
(21.35)
5000
(2268.0)
B3100-30
5"
(127.0)
61/4"
(158.7)
6000
(26.69)
6600
(2993.7)
B3100-36
5"
(127.0
57/16"
(138.1)
6000
(26.69)
8474
(3843.8)
*SLIDE-RITE Clevis Hanger design, as shown above, for sizes 2, 21/2, 3, 4, 5 & 6.
50
Pipe Hangers
E
Part No.
Pipe Hangers
B3102 - A.W.W.A. Clevis Hanger (TOLCO Fig.1CI)
Size Range: 4 (100mm) to 24 (600mm)
Function: Recommended for the suspension of
flanged or bell and spigot A.W.W.A. cast iron or
ductile iron pipe. The O.D. of the A.W.W.A. iron
pipe is shown in the data table.
B
Bottom of pipe t0 top of hanger.
A
(Rod Size)
Hanger Rod Not
Included
Material: Steel
E
C
D
Rod Take-Out
hanger rod.
Approvals: Conforms to Federal Specification

WW-H-171E & A-A-1192A, Type 1 and
Manufacturers Standardization Society ANSI/MSS
SP-69 & SP-58, Type 1.
E
hanger rod
Standard Finish: Plain & Electro-Galvanized.

Contact B-Line for alternative finishes and
materials.
F
Adjustment
Pipe Hangers
Pipe O.D.
Part No.
in.
(mm)
Rod Size
A
in.
B
85/16"
C
(mm)
in.
D
(mm)
in.
B3102-4
4.80
(121.9)
B3102-6
6.90
(175.2)
3/4"-10
105/8" (269.9) 71/16" (179.4) 513/16" (147.6)
B3102-8
9.05
(229.9)
3/4"-10
131/4" (336.5)
85/8"
(219.1)
73/16"
(182.5) 31/2"
B3102-10 11.10 (281.9)
7/8"-9
157/8" (403.2)
101/4"
(260.3) 811/16"
(220.6) 31/2"
B3102-12 13.20 (335.3)
7/8"-9
B3102-14 15.30 (388.6)
1"-8
203/8" (517.5) 125/8" (320.7) 113/16" (281.6)
B3102-16 17.40 (441.9)
1"-8
231/2" (569.9) 1411/16" (373.1) 127/8" (327.0)
B3102-18 19.50 (495.3)
1"-8
255/8" (650.9)
153/4"
B3102-20 21.60 (548.6)
11/4"-7
291/2" (749.3)
189/16" (471.5)
B3102-24 25.80 (655.3)
11/4"-7
33"
(457.2) 115/16" (287.3)
45/8"
E
(mm)
5/8"-11
18"
(211.1) 513/16" (147.6)
in.
93/4"
(117.5) 21/2"
(247.6) 31/2"
(400.0) 1315/16" (354.0)
(838.2) 191/8" (508.0)
3"
177/16"
(442.9)
20"
(485.8)
Design Load
Approx. Wt./100
(mm)
in.
F
(mm)
Lbs.
(kN)
Lbs.
(63.5)
2"
(50.8)
1430
(6.36)
203
(92.1)
(76.2)
2"
(50.8)
1940
(8.63)
352
(159.6)
(88.9)
21/8"
(54.0)
2000
(8.89)
532
(241.3)
(88.9)
21/4"
(57.1)
3600
(16.01)
800
(362.9)
(kg)
(88.9)
21/4"
(57.1)
3800
(16.90)
1152
(522.5)
4"
(101.6)
27/8"
(73.0)
4200
(18.68)
1449
(657.2)
4"
(101.6)
33/8"
(85.7)
4600
(20.46)
2100
(952.6)
(114.3)
33/8"
41/2"
(85.7)
4800
(21.35)
2294 (1040.5)
5"
(127.0) 413/16" (122.2)
4800
(21.35)
3887 (1763.1)
5"
(127.0)
51/4"
4800
(21.35)
4844 (2197.2)
(133.3)
51
Pipe Hangers
B3108 - Extended Clevis Hanger (TOLCO Fig.1A)
A
(Rod Size)
Hanger Rod Not
Included
Size Range: 3/4 (20mm) thru 12 (300mm) pipe

Material: Steel
B
C
Function: Recommended for the suspension of insulated

pipe where the temperature does not require the use of
slides, guides, or rollers for movement.
Approvals: Conforms to Federal Specification WW-H-171E
& A-A-1192A, Type 1 and Manufacturers Standardization
Society ANSI/MSS SP-69 & SP-58, Type 1.
D
Rod Take-Out
hanger rod.
E
hanger rod.
E
B

Order By: Part number and finish. For service
For Stainless Steel add SS to part number.
F
Adjustment
Top of cross bolt to bottom of
hanger rod nut inside the hanger.
Standard Finish: Plain, Electro-Galvanized or Hot Dip

Galvanized
For service temperatures of 750F (399C) thru
1050F (565C) specify Type 304 Stainless Steel
in.
(mm)
Rod Size
A
in.
C
(mm)
in.
43/8"
B3108-3/4
3/4"
(20)
3/8"-16
B3108-1
1"
(25)
3/8"-16
43/4"
53/8"
D
(mm)
in.
(mm)
(111.1)
313/16"
(96.8)
31/16"
(77.8)
(120.6)
41/16"
(103.2)
31/4"
(82.5)
(84.1)
B3108-11/4
11/4"
(32)
3/8"-16
(136.5)
41/2"
(114.3)
35/16"
B3108-11/2
11/2"
(40)
3/8"-16
67/8"
(174.6)
515/16"
(150.8)
51/8"
(130.2)
2"
(50)
3/8"-16
813/16"
(223.8)
75/8"
(193.7)
67/8"
(174.6)
21/2"
(65)
1/2"-13
10"
(254.0)
81/2"
(215.9)
79/16"
(192.1)
105/8"
(269.9)
813/16"
(223.8)
77/8"
(200.0)
(300.0)
91/2"
(241.3)
83/8"
(212.7)
(261.9)
91/8"
(231.8)
(279.5)
911/16"
(246.0)
(282.6)
B3108-2
B3108-21/2
B3108-3
3"
(80)
1/2"-13
B3108-4
4"
(100)
5/8"-11
1113/16"
131/8"
(333.4)
105/16"
(365.1)
11"
B3108-5
5"
(125)
5/8"-11
B3108-6
6"
(150)
3/4"-10
143/8"
(200)
3/4"-10
163/4"
(425.4)
123/8"
(314.3)
111/8"
191/4"
(488.9)
1313/16"
(350.8)
125/16"
(312.7)
215/8"
(549.3)
153/16"
(385.8)
135/8"
(346.1)
B3108-8
8"
Pipe Hangers
Nominal Pipe Size

Part No.
H
Maximum insulation thickness.
B3108-10
10"
(250)
7/8"-9
B3108-12
12"
(300)
7/8"-9
(mm)
in.
(mm)
in.
(mm)
lbs.
(kN)
lbs.
(kg)
E
Part No.
in.
Design Load
Approx. Wt./100
B3108-3/4
21/2"
(63.5)
1/2"
(12.7)
2"
(50.8)
730
(3.25)
45
(20.4)
B3108-1
21/2"
(63.5)
5/8"
(15.9)
2"
(50.8)
730
(3.25)
49
(22.2)
B3108-11/4
21/2"
(63.5)
7/8"
(22.2)
2"
(50.8)
730
(3.25)
55
(24.9)
B3108-11/2
21/2"
(63.5)
13/16"
(30.2)
2"
(50.8)
730
(3.25)
67
(30.4)
B3108-2
21/2"
(63.5)
15/8"
(41.3)
4"
(101.6)
730
(3.25)
83
(37.6)
B3108-21/2
21/2"
(63.5)
2"
(50.8)
4"
(101.6)
1350
(6.00)
177
(80.3)
B3108-3
21/2"
(63.5)
2"
(50.8)
4"
(101.6)
1350
(6.00)
191
(86.6)
B3108-4
21/2"
(63.5)
2"
(50.8)
4"
(101.6)
1430
(6.36)
237
(107.5)
B3108-5
B3108-6
21/2"
3"
(63.5)
(50.8)
(8.63)
302
397
(137.0)
(101.6)
1430
1940
(6.36)
(50.8)
4"
4"
(101.6)
(76.2)
2"
2"
B3108-8
31/2"
(88.9)
25/16"
(58.7)
4"
(101.6)
2000
(8.89)
582
(264.0)
B3108-10
31/2"
(88.9)
25/16"
(58.7)
4"
(101.6)
3600
(16.01)
968
(439.1)
B3108-12
31/2"
(88.9)
25/8"
(66.7)
4"
(101.6)
3800
(16.90)
1221
(553.8)
(180.1)
52
Pipe Hangers
B3100C - Standard Clevis Hanger - Plastic Coated (TOLCO Fig.1PVC)
B3100F - Standard Clevis Hanger - Felt Lined for Copper Tubing (TOLCO Fig.1F)
Size Range: 1/2 (15mm) to 8 (200mm) pipe
Material: Steel
A
(Rod Size)
Hanger Rod Not
Included
Insulation Material: 3/16 (4.8mm) Felt

Service: The B3100F is designed for the suspension of
copper tube so as to prevent electrolysis between tubing
and hanger. The B3100C is designed for steel or other
pipe types of the same O.D. Both B3100F and B3100C
act to reduce noise and vibration in pipe or tubing
systems.
B
C
D
Rod Take-Out
hanger rod.
E
hanger rod
Approvals: Underwriter's Laboratories Listed in the USA

(UL) and Canada (cUL).
F
Adjustment

Standard Finish: Plain, Electro-Galvanized, or Hot-Dip
Galvanized. Contact B-Line for alternative finishes and
materials.
Pipe Size
Part No.
Pipe Hangers
B3100-1/2
B3100-3/4
B3100-1
B3100-11/4
B3100-11/2
B3100-2
B3100-21/2
B3100-3
B3100-31/2
B3100-4
B3100-5
B3100-6
B3100-8
in.
(mm)
Rod Size
A
1/2"
(15)
3/8"-16
3/4"
(20)
3/8"-16
(25)
3/8"-16
(32)
3/8"-16
(40)
3/8"-16
(50)
3/8"-16
(65)
1/2"-13
(80)
1/2"-13
(90)
1/2"-13
(100)
5/8"-11
(125)
5/8"-11
(150)
3/4"-10
(200)
3/4"-10
1"
11/4"
11/2"
2"
21/2"
3"
1
3 /2"
4"
5"
6"
8"
E
Part No.
B3100-1/2
B3100-3/4
B3100-1
B3100-11/4
B3100-11/2
B3100-2
B3100-21/2
B3100-3
B3100-31/2
B3100-4
B3100-5
B3100-6
B3100-8
in.
(mm)
in.
(mm)
in.
(mm)
21/8"
27/16"
213/16"
37/16"
4"
1
4 /2"
59/16"
63/4"
7"
713/16"
91/16"
107/16"
123/4"
(54.0)
111/16"
17/8"
21/8"
29/16"
3"
1
3 /4"
4"
47/8"
5"
51/2"
61/8"
615/16"
83/8"
(42.9)
15/16"
(23.8)
(47.6)
11/8"
13/8"
113/16"
21/4"
21/2"
31/16"
315/16"
41/16"
43/8"
5"
11
5 /16"
71/8"
(28.6)
(61.9)
(71.4)
(87.3)
(101.6)`
(114.3)
(141.3)
(171.4)
(177.8)
(198.4)
(230.2)
(265.1)
(323.8)
Adjustment F
Design Load
(54.0)
(65.1)
(76.2)
(82.5)
(101.6)
(123.8)
(127.0)
(139.7)
(155.6)
(176.2)
(212.7)
(mm)
in.
(mm)
Lbs.
(kN)
Lbs.
(kg)
21/2"
21/2"
21/2"
21/2"
21/2"
21/2"
21/2"
21/2"
21/2"
21/2"
21/2"
3"
31/2"
(63.5)
7/16"
(11.1)
(3.25)
1/2"
(12.7)
(63.5)
5/8"
(15.9)
(63.5)
7/8"
(22.2)
(63.5)
13/16"
(30.2)
(63.5)
15/8"
2"
2"
2"
2"
2"
2"
25/16"
(41.3)
25
29
35
40
42
52
90
110
142
132
215
320
485
(11.3)
(63.5)
730
730
730
730
730
730
1350
1350
1350
1430
1430
1940
2000
(63.5)
(63.5)
(63.5)
(63.5)
(63.5)
(76.2)
(88.9)
(50.8)
(50.8)
(50.8)
(50.8)
(50.8)
(50.8)
(58.7)
(3.25)
(3.25)
(3.25)
(3.25)
(6.00)
(6.00)
(6.00)
(6.36)
(6.36)
(8.63)
(8.89)
(46.0)
(57.1)
(63.5)
(77.8)
(100.0)
(103.2)
(111.1)
(127.0)
(144.5)
(181.0)
Approx. Wt./100
in.
(3.25)
(34.9)
(13.1)
(15.9)
(18.1)
(19.0)
B3100C
(23.6)
(40.8)
(49.9)
(64.4)
(59.9)
(97.5)
(145.1)
(220.0)
B3100F
53
Pipe Hangers
B3690 - J-Hanger for Pipe or Conduit (TOLCO Fig. 3)
B3690F - Felt Lined J-Hanger for Copper Tubing (TOLCO Fig. 3F)
B3690C - PVC Coated J-Hanger for Pipe or Conduit (TOLCO Fig. 3PVC)
Size Range: 1/2 (15mm) to 10 (250mm) pipe size
Material: Steel
non-insulated pipe, or insulated pipe with B3151 shield.
Side hole allows for wall mounting.
B3690F and B3690C are designed to reduce noise and
vibration and/or prevent electrolysis between pipe and
hanger.
B
A
(Rod Size)
Hanger Rod Not
Included
F
Rod Take-Out
hanger rod.
Approvals: Conforms Manufacturers Standardization

Standard Finish: Electro-Plated. Contact B-Line

for alternative finishes and materials.
D
Dia.

E
B3690F
B3690C
Pipe O.D.
Part No.
in.
(mm)
Rod Size
A
in.
B
25/8"
27/8"
3/8"-16
B3690-11/4
11/4" (32)
3/8"-16
31/4"
B3690-11/2
11/2"
(40)
3/8"-16
39/16"
311/16"
B3690-3
B3690-31/2
B3690-4
Lbs.
(kg)
(38.1)
115/16"
(49.2)
400
(1.78)
18
(8.1)
(11.1) 111/16" (42.9)
21/8"
(54.0)
400
(1.78)
21
(9.5)
7/16"
(11.1) 113/16" (46.0)
25/16"
(58.7)
400
(1.78)
22
(10.0)
(50.8)
7/16"
(11.1) 21/16" (52.4)
25/8"
(66.7)
400
(1.78)
25
(11.3)
(55.6)
7/16"
(11.1) 27/16"
(61.9)
27/8"
(73.0)
400
(1.78)
27
(12.2)
(11.1) 29/16"
(77.8)
400
(1.78)
29
(13.1)
(47.6)
(25)
B3690-21/2
(kN)
215/16" (74.6) 115/16" (49.2)
(20)
(73.0)
Lbs.
(11.1)
1"
17/8"
(mm)
7/16"
3/8"-16
(66.7)
Approx. Wt./100
in.
(44.4)
(15)
3/4"
13/4"
Design Load
(mm)
11/2"
B3690-3/4
in.
(82.5)
2"
(90.5)
23/16"
(93.7)
21/8"
(112.7)
(mm)
in.
7/16"
3/8"-16
(mm)
D
in.
1/2"
B3690-2
(mm)
B3690-1/2
B3690-1
Pipe Hangers
(50)
3/8"-16
(54.0)
7/16"
(65.1)
31/16"
21/2"
(65)
1/2"-13
47/16"
27/16"
(61.9)
9/16"
(14.3) 33/16"
(81.0)
35/8"
(92.1)
500
(2.22)
64
(29.0)
3"
(80)
1/2"-13
413/16" (122.2) 29/16"
(65.1)
9/16"
(14.3)
31/2"
(88.9)
41/16" (103.2)
500
(2.22)
72
(32.6)
31/2" (90)
1/2"-13
51/8" (130.2)
25/8"
(66.7)
9/16"
(14.3)
33/4"
(95.2)
43/8"
(111.1)
500
(2.22)
84
(38.1)
(100)
5/8"-11
61/8"
(155.6)
33/16"
(81.0)
9/16"
(14.3)
45/8"
(117.5)
53/16"
(131.8)
550
(2.44)
138
(62.6)
63/4"
(171.4)
31/4"
(82.5)
9/16"
(14.3) 51/16" (128.6)
53/4"
(146.0)
550
(2.44)
162
(73.5)
65/8"
(168.3)
600
(2.67)
249
(112.9)
2"
4"
B3690-5
5"
(125)
5/8"-11
B3690-6
6"
(150)
3/4"-10
73/4" (196.8) 39/16"
(90.5)
9/16"
(14.3) 513/16" (147.6)
B3690-8
8"
(200)
7/8"-9
93/16" (233.4) 315/16" (100.0)
9/16"
(14.3) 615/16" (176.2)
8"
(203.3)
760
(3.38)
291
(132.0)
10" (250)
7/8"-9
103/4" (273.0)
9/16"
75/8"
91/8"
(231.8)
760
(3.38)
315
(142.9)
B3690-10
37/8"
(98.4)
(14.3)
(193.7)
54
Pipe Hangers
B3109 - Flat Top Clevis Hanger
Size Range: 2 (50mm) to 8 (200mm) pipe size
A
(Rod Size)
Hanger Rod Not
Included
Material: Steel
Function: Recommended for suspending noninsulated, stationary pipe where space is limited.
Approvals: Complies with Manufacturers
Standardization Society ANSI/MSS SP-69 & SP-58
Type 1.
B
Bottom of pipe
to top of hanger.
C
Center of pipe
to top of hanger.
C
B
Standard Finish: Plain or Electro-Galvanized

D
Pipe Size
Pipe Hangers
Part No.
B3109-2
B3109-21/2
B3109-3
B3109-31/2
in.
(mm)
Rod Size
A
in.
(mm)
2"
(50)
3/8"-16
313/16"
(96.8)
21/2"
(65)
1/2"-13
45/8"
(117.5)
(80)
1/2"-13
55/16"
(134.9)
(90)
1/2"-13
513/16"
(147.6)
61/2"
(165.1)
3"
31/2"
B3109-4
4"
(100)
5/8"-11
B3109-5
5"
(125)
5/8"-11
713/16"
(198.4)
B3109-6
6"
(150)
3/4"-10
97/16"
(230.2)
(200)
3/4"-10
113/8"
(288.9)
(mm)
in.
(mm)
Lbs.
(kN)
B3109-2
25/8"
(66.7)
17/8"
(47.6)
300
B3109-21/2
33/16"
(81.0)
23/16"
(55.6)
500
B3109-3
39/16"
(90.5)
25/8"
(66.7)
B3109-31/2
313/16"
B3109-8
8"
C
Part No.
in.
Rod Take-Out D
Design Load
Approx. Wt./100
Lbs.
(kg)
(1.33)
52
(23.6)
(2.22)
116
(52.6)
500
(2.22)
133
(60.3)
(65.8)
(96.8)
27/8"
(73.0)
500
(2.22)
145
B3109-4
41/4"
(107.9)
31/8"
(79.4)
700
(3.11)
180
(81.6)
B3109-5
5"
(127.0)
37/8"
(98.4)
700
(3.11)
248
(112.5)
B3109-6
511/16"
(144.5)
47/16"
(112.7)
900
(4.00)
332
(150.6)
(177.8)
513/16"
(147.6)
1000
(4.45)
513
(232.7)
B3109-8
7"
D
Rod Take-Out
Center of pipe to
bottom of hanger rod.
55
Pipe Hangers
B3106 - Vee Bottom Clevis Hanger (TOLCO Fig. 1V)
A
(Rod Size)
Hanger Rod Not
Included
Material: Steel
flexible plastic pipe. Use with B3106V support
trough for plastic pipe.
E
Minimum thread length of hanger rod.
Standard Finish: Plain & Electro-Galvanized.

Contact B-Line for alternative finishes and materials.
D
C
Pipe Size
in.
C
D
Rod Take-Out
Center of pipe to bottom of hanger rod.
Approvals: Complies with Manufacturers

Standardization Society ANSI/MSS SP-69 & SP-58
Type 1.
Part No.
B
Overall Height
(mm)
Rod Size
A
in.
B
(mm)
in.
C
(mm)
B3106-2
1/2"
to 2"
(15 to 50)
3/8"-16
515/16"
(150.8)
41/16"
(103.2)
B3106-4
21/2" to 4"
(65 to 100)
1/2"-13
93/8"
(238.1)
6"
(152.4)
Part No.
Rod Take-Out D
Adjustment E
in.
(mm)
in.
(mm)
Lbs.
(kN)
Lbs.
(kg)
(84.1)
15/8"
(41.3)
150
(.67)
60
(27.2)
(122.2)
23/16"
(55.6)
150
(.67)
143
(64.8)
B3106-4
413/16"
Approx Wt./100
Pipe Hangers
B3106-2
35/16"
Design Load
B3106V - Plastic Pipe Support Channel (TOLCO Fig. 1VT)

Material: Steel
TxL
Steel Size
Function: Designed for use with B3106 as a

support for plastic or other flexible pipe systems.
Standard Finish: Pre-Galvanized. Contact
B-Line for alternative finishes and
materials.
For Nominal
Pipe Sizes
Part No.
Steel Size
T x L
Maximum
Hanger
Spacing
Design
Load
Approx.
Wt./100
in.
(mm)
in.
(mm)
in.
(mm)
Ft.
(M)
Lbs.
(kN)
Lbs.
(kg)
B3106V-2
1/2" to 2"
(15 to 50)
18 Ga. x 96"
(1.2 x 2438.4)
19/16"
(39.7)
(2.44)
150
(.67)
449
(203.6)
B3106V-4
21/2" to 4"
(65 to 100)
18 Ga. x 120"
(1.2 x 3048.0)
31/8"
(79.4)
10
(3.05)
150
(.67)
1123
(509.4)
56
Pipe Hangers
B3104 - Light-Duty Clevis Hanger
B3104F - Light-Duty Clevis Hanger - Felt Lined
B3104C - Light-Duty Clevis Hanger - PVC Coated
A
(Rod Size)
Hanger Rod Not
Included

Material: Steel
E
Function: Recommended for the suspension of light

stationary pipe allowing for vertical adjustment.
B
C
Approvals: Underwriter's Laboratories Listed in the USA (UL)

and Canada (cUL) for sizes 3/4 (20mm) thru 4 (100mm).
Conforms to Federal Specification WW-H-171E & A-A-1192A,
Type 12 and Manufacturers Standardization Society
ANSI/MSS SP-69 & SP-58, Type 1.
D
Rod Take-Out
hanger rod.
E
hanger rod.
Standard Finish: Plain, Electro-Galvanized,

or DURA-GREEN
F
Adjustment
Top of cross bolt to bottom of hanger rod
nut inside the hanger.
*Slide-Rite Clevis Hanger

design for sizes 2, 3 & 4.
Pat. No. 5,848,770
5,924,655
Pipe Size
Part No.
in.
(mm)
Rod Size
A
in.
B
115/16"
C
(mm)
in.
(mm)
(38.1)
B3104-1/2
1/2"
(15)
3/8"-16
(49.2)
11/2"
B3104-3/4
3/4"
(20)
3/8"-16
25/16"
(58.7)
13/4"
(44.4)
1"
(25)
3/8"-16
23/4"
(69.8)
21/16"
(52.4)
35/16"
(61.9)
B3104-1
Pipe Hangers
B3104-11/4
11/4"
(32)
3/8"-16
(84.1)
27/16"
B3104-11/2
11/2"
(40)
3/8"-16
35/8"
(92.1)
25/8"
(66.7)
B3104-2 *
2"
(50)
3/8"-16
413/16"
(122.2)
35/8"
(92.1)
B3104-21/2
21/2"
(65)
1/2"-13
513/16"
(147.6)
45/16"
(109.5)
B3104-3 *
3"
(80)
1/2"-13
67/16"
(163.5)
45/8"
(117.5)
B3104-31/2
31/2"
(90)
1/2"-13
615/16"
(176.2)
415/16"
(125.4)
(100)
1/2"-13
73/4"
(196.8)
51/2"
(139.7)
B3104-4 *
4"
Rod Take-Out D
Part No.
Adjustment F
Design Load
B3104C
B3104F
Approx. Wt./100
in.
(mm)
in.
(mm)
in.
(mm)
Lbs.
(kN)
Lbs.
(kg)
13/16"
(20.6)
21/2"
(63.5)
7/16"
(11.1)
150
(.67)
13
(5.9)
B3104-3/4
1"
(25.4)
21/2"
(63.5)
7/16"
(11.1)
250
(1.11)
22
(10.0)
B3104-1
13/8"
(34.9)
21/2"
(63.5)
9/16"
(14.3)
250
(1.11)
24
(10.9)
B3104-11/4
13/4"
(44.4)
21/2"
(63.5)
13/16"
(20.6)
250
(1.11)
29
(13.1)
(50.8)
21/2"
(63.5)
1"
(25.4)
250
(1.11)
30
(13.6)
(74.6)
21/2"
(63.5)
13/4"
(44.4)
250
(1.11)
35
(15.9)
B3104-1/2
B3104-11/2
2"
B3104-2 *
215/16"
B3104-21/2
37/16"
(87.3)
21/2"
(63.5)
2"
(50.8)
350
(1.55)
82
(37.2)
B3104-3 *
33/4"
(95.2)
21/2"
(63.5)
2"
(50.8)
350
(1.55)
91
(41.3)
B3104-31/2
4"
(101.6)
21/2"
(63.5)
2"
(50.8)
350
(1.55)
98
(44.4)
B3104-4 *
49/16"
(115.9)
21/2"
(63.5)
23/16"
(55.6)
400
(1.78)
132
(59.9)
57
Pipe Hangers
B
B3104CT - Clevis Hanger (TOLCO Fig. 81)

B3104CTC - Clevis Hanger - PVC Coated (TOLCO Fig. 81PVC)
C
A
(Rod Size)
Hanger Rod Not
Included
Size Range: 1/2 (15mm) to 6 (150mm) copper tubing

Material: Steel
non- insulated stationary copper tubing lines.
Available with plastic coating to provide additional
separation between tubing and hanger.
D
Rod Take-Out
Center of pipe to bottom
of hanger rod.

WW-H-171E & A-A-1192A, Type 12 and
Manufacturers Standardization Society
E
Minimum thread length
of hanger rod.
F
Adjustment
Top of cross bolt to bottom of
hanger rod nut inside the hanger.
Standard Finish: DURA-COPPER

B3104CTC
in.
(mm)
Rod Size
A
in.
B
21/4"
C
(mm)
in.
Rod Take-Out D
(mm)
in.
(mm)
(28.6)
B3104CT-1/2
1/2"
(15)
3/8"-16
(57.1)
115/16"
(49.2)
11/8"
B3104CT-3/4
3/4"
(20)
3/8"-16
115/16"
(49.2)
11/2"
(38.1)
11/8"
(28.6)
1"
(25)
3/8"-16
25/16"
(58.7)
13/4"
(44.4)
15/16"
(33.3)
B3104CT-11/4
11/4"
(32)
3/8"-16
23/4"
(69.8)
21/16"
(52.4)
19/16"
(39.7)
B3104CT-11/2
11/2"
(40)
3/8"-16
35/16"
(84.1)
27/16"
(61.9)
21/16"
(52.4)
41/2"
(85.7)
B3104CT-1
B3104CT-2
B3104CT-21/2
B3104CT-3
B3104CT-31/2
B3104CT-4
(50)
3/8"-16
(114.3)
37/16"
(87.3)
33/8"
21/2"
(65)
1/2"-13
511/16"
(144.5)
41/2"
(114.3)
315/16"
(100.0)
3"
(80)
1/2"-13
53/16"
(131.8)
35/8"
(92.1)
4"
(101.6)
(90)
1/2"-13
61/2"
(165.1)
49/16"
(115.9)
41/8"
(104.8)
(100)
1/2"-13
73/8"
(187.3)
35/16"
(134.9)
43/8"
(111.1)
9"
(228.6)
67/16"
(163.5)
53/4"
(146.0)
105/16"
(261.9)
71/4"
(184.1)
61/2"
(165.1)
2"
31/2"
4"
B3104CT-5
5"
(125)
1/2"-13
B3104CT-6
6"
(150)
5/8"-11
E
Part No.
in.
Adjustment F
(mm)
in.
Design Load
(mm)
Lbs.
Approx. Wt./100
(kN)
Lbs.
(kg)
B3104CT-1/2
21/2"
(63.5)
3/8"
(9.5)
150
(.67)
12
(5.4)
B3104CT-3/4
21/2"
(63.5)
7/16"
(11.1)
250
(1.11)
12
(5.4)
B3104CT-1
21/2"
(63.5)
9/16"
(14.3)
250
(1.11)
22
(10.0)
B3104CT-11/4
21/2"
(63.5)
9/16"
(14.3)
250
(1.11)
24
(10.9)
B3104CT-11/2
21/2"
(63.5)
15/16"
(23.8)
250
(1.11)
30
(13.6)
B3104CT-2
21/2"
(63.5)
13/4"
(44.4)
250
(1.11)
35
(15.9)
B3104CT-21/2
21/2"
(63.5)
21/8"
(54.0)
350
(1.55)
80
(36.3)
B3104CT-3
21/2"
(63.5)
21/16"
(52.4)
350
(1.55)
88
(39.9)
B3104CT-31/2
21/2"
(63.5)
21/8"
(54.0)
350
(1.55)
94
(42.6)
B3104CT-4
21/2"
(63.5)
21/8"
(54.0)
400
(1.78)
116
(52.6)
B3104CT-5
21/2"
(63.5)
21/2"
(63.5)
550
(2.44)
208
(94.3)
B3104CT-6
21/2"
(63.5)
3"
(76.2)
550
(2.44)
247
(112.0)
58
Pipe Hangers
Tubing Size
Part No.
B3104CT
Pipe Hangers
Fig. 2 - Adjustable Band Hanger (B-Line B3170)
Fig. 2F - Adjustable Band Hanger Felt Lined for Copper Tubing (B-Line B3170F)
Size Range:
Fig. 2 - 21/2 (65mm) thru 6 (150mm) pipe
Fig. 2F - 21/2 (65mm) thru 6 (150mm) pipe
C
Material: Pre-Galvanized Steel
Function: Recommended for the suspension of noninsulated pipe or insulated pipe with B3151 shield.
Fig. 2NFPA accomodates the reduced rod schedule of
the National Fire Pretection Association Pamphlet 13.
Approvals: Factory Mutual Engineering Approved.

Underwriters Laboratories Listed. Conforms to Federal
Specification WW-H-171E & A-A-1192A Type 10 and
Manufacturers Standardization Society ANSI/MSS
SP-69 & SP-58, Type 10.
Fig. 2
Standard Finish: Pre-Galvanized

Note: Available in Stainless Steel material.
C
B
Fig. 2F
Fig. 2
Pipe Hangers
Nominal
Part No.
in.
Pipe Size
2-21/2
21/2"
2-3
2-31/2
2-4
2-5
2-6
3"
31/2"
4"
5"
6"
(mm)
(65)
(75)
(90)
(100)
(125)
(150)
Rod Size
A
B
in.
1/2"-13
53/4"
1/2"-13
6"
73/8"
73/8"
9"
93/8"
*
*
1/2"-13 *
5/8"-11 *
5/8"-11 **
3/4"-10 **
C
(mm)
in.
(146.0)
(152.4)
(187.3)
(187.3)
(228.6)
(238.1)
41/4"
(mm)
in.
(146.0)
(152.4)
(187.3)
(187.3)
(228.6)
(238.1)
41/4"
41/8"
51/4"
5"
61/8"
61/2"
Max. Rec. Load
Approx Wt./100
(mm)
in.
(mm)
lbs.
(kN)
lbs.
(kg)
(107.9)
(104.8)
(133.3)
(127.0)
(155.6)
(165.1)
15/8"
(41.3)
(31.7)
(54.0)
(41.3)
(57.1)
(47.6)
600
600
600
1000
1250
1250
(2.67)
(2.67)
(2.67)
(4.45)
(5.56)
(5.56)
41
45
52
59
97
139
(18.6)
(20.4)
(23.6)
(27.6)
(44.0)
(63.0)
(mm)
in.
(mm)
lbs.
(kN)
lbs.
(kg)
(107.9)
(104.8)
(133.3)
(127.0)
(155.6)
(165.1)
15/8"
(41.3)
(31.7)
(54.0)
(41.3)
(57.1)
(47.6)
600
600
600
1000
1250
1250
(2.67)
(2.67)
(2.67)
(4.45)
(5.56)
(5.56)
41
45
52
59
97
139
(18.6)
(20.4)
(23.6)
(27.6)
(44.0)
(63.0)
11/4"
21/8"
15/8"
21/4"
17/8"
Fig. 2F
Nominal
Part No.
in.
Pipe Size
2F-21/2
21/2"
2F-3
2F-31/2
2F-4
2F-5
2F-6
3"
31/2"
4"
5"
6"
(mm)
(65)
(75)
(90)
(100)
(125)
(150)
Rod Size
A
B
in.
1/2"-13
53/4"
1/2"-13
6"
73/8"
73/8"
9"
93/8"
*
*
1/2"-13 *
5/8"-11 *
5/8"-11 **
3/4"-10 **
* 3/8 nut is used when requested.
41/8"
51/4"
5"
61/8"
61/2"
11/4"
21/8"
15/8"
21/4"
17/8"
Max. Rec. Load
Approx Wt./100
** 1/2 nut is used when requested.
59
Pipe Hangers
B3170CT - Adjustable Swivel Hanger for Copper Tubing (TOLCO Fig. 202)
B3170CTC - Adjustable Swivel Hanger for Copper Tubing - Plastic Coated
Size Range: 1/2 (15mm) thru 6 (150mm) copper tubing
A
(Rod Size)
Hanger Rod Not
Included
Material: Steel
copper tubing, allowing for vertical adjustment.
(Available with plastic coating to provide additional
separation between tubing and hanger.)
B
Center of pipe to top of
knurled hanger rod nut.
C
Rod Take-Out
Center of pipe to bottom
of hanger rod.

WW-H-171E & A-A-1192A, Type 10 and Manufacturers
Standardization Society ANSI/MSS SP-69 & SP-58,
Type 10.
D
Top of pipe to bottom of
hanger rod nut.

Nominal
Pipe Size
Rod Size
A
in.
C
(mm)
in.
21/16"
D
(mm)
in.
(mm)
(52.4)
11/8"
(28.6)
31/32"
(24.6)
(58.7)
15/16"
(33.3)
11/32"
(26.2)
(39.7)
15/32"
(29.3)
(39.7)
1"
(25.4)
(33.3)
B3170CT-1/2
1/2"
(15)
3/8"-16
B3170CT-3/4
3/4"
(20)
3/8"-16
25/16"
21/2"
(63.5)
19/16"
(63.5)
19/16"
1"
(25)
3/8"-16
B3170CT-11/4
11/4"
(32)
3/8"-16
21/2"
B3170CT-11/2
11/2"
(40)
3/8"-16
215/16"
(74.6)
2"
(50.8)
15/16"
2"
(50)
3/8"-16
31/8"
(79.4)
21/8"
(54.0)
13/16"
(30.2)
21/2"
(65)
1/2"-13
41/16"
(103.2)
29/16"
(65.1)
13/8"
(34.9)
3"
(75)
1/2"-13
315/16"
(100.0)
33/4"
(95.2)
11/4"
(31.7)
31/2"
(90)
1/2"-13
47/16"
(112.7)
31/4"
(82.5)
11/2"
(38.1)
4"
(100)
1/2"-13
411/16"
(119.1)
39/16"
(89.6)
19/16"
(39.7)
515/16"
(150.8)
45/16"
(109.5)
125/32"
(45.2)
611/16"
(169.9)
53/16"
(131.8)
21/8"
(54.0)
B3170CT-1
B3170CT-2
B3170CT-21/2
B3170CT-3
B3170CT-31/2
B3170CT-4
B3170CT-5
5"
(125)
1/2"-13
B3170CT-6
6"
(150)
1/2"-13
Max. Rec. Load

Part No.
lbs.
(kN)
B3170CT-1/2
180
B3170CT-3/4
180
B3170CT-1
B3170CT-11/4
B3170CT-11/2
B3170CT-2
Pipe Hangers
Part No.
Approx. Wt./100
lbs.
(kg)
(0.80)
(6.6)
(0.80)
10
(4.5)
180
(0.80)
10
(4.5)
180
(0.80)
12
(5.4)
180
(0.80)
12
(5.4)
180
(0.80)
12
(5.4)
B3170CT-21/2
200
(0.89)
31
(24.0)
B3170CT-3
250
(1.11)
33
(14.9)
B3170CT-31/2
300
(1.33)
39
(17.2)
B3170CT-4
360
(1.60)
40
(18.1)
B3170CT-5
480
(2.13)
95
(43.1)
B3170CT-6
630
(2.80)
118
(53.5)
B3170CT
B3170CTC
60
Pipe Hangers
Fig. 200 - Trimline Adjustable Band Hanger (B-Line B3170NF)
Fig. 200F - Trimline Adjustable Band Hanger with Felt Lining for Copper Tubing (B-Line B3170NFF)
Fig. 200C - Trimline Adjustable Band Hanger with Plastic Coated (B-Line B3170NFC)
Size Range:
Fig. 200 - 1/2 (15mm) thru 8 (200mm) pipe
Material: Steel, Pre-Galvanized to G90 specifications
Function: For fire sprinkler and other general piping purposes. Knurled
swivel nut design permits hanger adjustment after installation.
Features:
(1/2 (15mm) thru 2 (50mm)) Flared edges ease installation for all pipe
types and protect CPVC plastic pipe from abrasion. Captured design
keeps adjusting nut from separating with hanger. Hanger is easily
installed around pipe.
(21/2 (65mm) thru 8 (200mm)) Spring tension on nut holds it securely in
hanger before installation. Adjusting nut is easily removed.
B
A
Approvals: Underwriters Laboratories listed (1/2 (15mm) thru 8 (200mm))

in the USA (UL) and Canada (cUL) for steel and CPVC plastic pipe and
Factory Mutual Engineering Approved (3/4 (20mm) thru 8 (200mm)).
Conforms to Federal Specifications WW-H-171E & A-A-1192A, Type 10
and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58,
Type 10.
Fig. 200-21/2 to 200-8
Fig. 200-1/2 to 200-2
Maximum Temperature: 650F (343C)

Finish: Pre-Galvanized. Stainless Steel
materials will be supplied with (2) hex nuts
in place of a knurl nut.
Order By: Part number and pipe size
Pipe Hangers
** Note: For metric hanger rod sizes add the

metric rod size to the figure number.
Example: 200M8-11/2 or 200M10-11/2
Fig. 200
Fig. 200C
Pipe Size
Rod Size
Part No.
in.
(mm)
in.
200-1/2
200-3/4
200-1
200-11/4
200-11/2
200-2
200-21/2
200-3
200-31/2
200-4
200-5
200-6
200-8
1/2"
(15)
3/8"-16
3/4"
(20)
3/8"-16
1"
11/4"
11/2"
2"
21/2"
3"
1
3 /2"
4"
5"
6"
8"
(25)
3/8"-16
(32)
3/8"-16
(40)
3/8"-16
(50)
3/8"-16
(65)
3/8"-16
(75)
3/8"-16
(90)
3/8"-16
(100)
3/8"-16
(125)
1/2"-13
(150)
1/2"-13
(200)
1/2"-13
mm**
M8 or M10
M8 or M10
M8 or M10
M8 or M10
M8 or M10
M8 or M10
M10
M10
M10
M10
M12
M12
M12
Fig. 200F
Max. Rec. Load
Approx. Wt./100
in.
(mm)
in.
(mm)
lbs.
(kN)
lbs.
(kg)
31/8"
31/8"
33/8"
33/4"
37/8"
41/2"
55/8"
57/8"
73/8"
73/8"
91/8"
101/8"
131/8"
(79.4)
25/8"
21/2"
25/8"
27/8"
27/8"
3"
41/8"
4"
1
5 /4"
5"
61/4"
63/4"
83/4"
(66.7)
400
400
400
400
400
400
600
600
600
1000
1250
1250
1250
(1.78)
11
11
12
13
14
15
27
29
34
35
66
73
136
(5.0)
(79.4)
(85.7)
(94.0)
(98.4)
(114.3)
(142.9)
(149.1)
(187.3)
(187.3)
(231.8)
(257.2)
(333.4)
(63.5)
(66.7)
(73.0)
(73.0)
(76.3)
(104.7)
(101.6)
(133.3)
(127.0)
(158.7)
(171.4)
(222.2)
(1.78)
(1.78)
(1.78)
(1.78)
(1.78)
(2.67)
(2.67)
(2.67)
(4.45)
(5.56)
(5.56)
(5.56)
(5.0)
(5.5)
(5.9)
(6.4)
(6.9)
(12.3)
(13.3)
(15.6)
(16.0)
(30.2)
(33.4)
(62.3)
61
Pipe Hangers
Fig. 200H - Heavy Duty Band Hanger (For Trapeze)
Size Range: 2 (50mm) thru 4 (100mm) trapeze pipe size.
Material: Steel Pre-Galvanized to G40 Spec
Function: Designed primarily to support substantially heavier loads
than is normally intended for the nominal hanger size. Used
extensively to support trapeze installations and the increased loads
from both above and below the trapeze assembly.
Features: Furnished with 3/8"-16 or 1/2"-13 adjusting threaded ring nut.
B
Approvals: Underwriters Laboratories listed in the USA (UL) and

Canada** (cUL). Conforms to Federal Specification WW-H-171E &
A-A-1192A, Type 10 and Manufacturers Standardization Society

Finish: Pre-Galvanized
Order By: Part number, pipe size and rod size.
Pipe Hangers
Important Design Note. Because of the increased loads applied to the

trapeze assembly, both the upper trapeze supports as well as the lower
hanging unit must be able to hold the maximum loads intended.
Pipe Size
Part No.
200H-2-3/8
200H-2-1/2
200H-21/2-3/8
200H-21/2-1/2
200H-3-3/8
200H-3-1/2
200H-4-3/8
200H-4-1/2
Rod Size
in.
(mm)
2"
2"
1
2 /2"
21/2"
3"
3"
4"
4"
(50)
3/8"-16
(50)
1/2"-13
(65)
3/8"-16
(65)
1/2"-13
(75)
3/8"-16
(75)
1/2"-13
(100)
3/8"-16
(100)
1/2"-13
Max. Rec. Load
Approx. Wt./100
in.
(mm)
in.
(mm)
lbs.
(kN)
lbs.
(kg)
49/16"
423/32"
55/16"
515/32"
53/4"
57/8"
67/8"
71/32"
(115.9)
37/32"
33/8"
323/32"
37/8"
327/32"
331/32"
47/16"
419/32"
(81.7)
1200
1200
1200
1200
1200
1200
1200
1200
(5.34)
48
45
59
56
63
60
76
73
(21.8)
(119.8)
(134.9)
(138.9)
(146.0)
(148.1)
(174.6)
(178.6)
(85.7)
(94.4)
(98.3)
(97.6)
(100.8)
(112.7)
(1116.7)
(5.34)
(5.34)
(5.34)
(5.34)
(5.34)
(5.34)
(5.34)
(20.4)
(26.7)
(25.4)
(28.6)
(27.2)
(34.5)
(33.1)
* Select trapeze pipe size based on section modulus required for span of trapeze per information provided in
NFPA 13 (2002) Table 9.1.1.6.1 (a and b).
** All sizes are UL Listed to support up to 8" pipe at max spacing per NFPA 13.
For 6 (150mm) and 8 (200mm) trapeze pipe, consult factory.
62
Pipe Hangers
B3198H - Hinged Extension Split Pipe Clamp (TOLCO Fig. 302)
A
(Rod Size)
Hanger Rod Not
Included

Material: Malleable Iron
Function: Designed for suspending non-insulated pipe horizontally or vertically.

Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 25
and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 12.
Standard Finish: Plain or Electro-Galvanized
in.
Pipe Size
(mm)
Rod Size
A
in.
(mm)
Lbs.
kN
Lbs.
kg
B3198H-3/8
3/8"
(10)
3/8"-16
31/32"
(24.6)
180
(.80)
(4.1)
B3198H-1/2
1/2"
(15)
3/8"-16
11/16"
(27.0)
180
(.80)
12
(5.4)
B3198H-3/4
3/4"
(20)
3/8"-16
17/32"
(30.9)
180
(.80)
12
(5.4)
1"
(25)
3/8"-16
111/32"
(34.1)
180
(.80)
13
(5.9)
(32)
3/8"-16
119/32"
(39.7)
180
(.80)
18
(8.1)
(40)
3/8"-16
123/32"
(43.6)
180
(.80)
21
(9.5)
(50)
3/8"-16
2"
(50.8)
180
(.80)
44
(19.9)
(65)
1/2"-13
211/32"
(59.5)
300
(1.33)
73
(33.1)
(80)
1/2"-13
223/32"
(69.0)
300
(1.33)
95
(43.1)
Part No.
B3198H-1
B3198H-11/4
11/4"
B3198H-11/2
11/2"
B3198H-2
2"
B3198H-21/2
21/2"
B3198H-3
3"
Design Load
Approx. Wt./100
B3198R - Extension Split Pipe Clamp

A
(Thread Size)
Hanger Rod Not
Included
Pipe Hangers

Function: Designed for suspending non-insulated pipe horizontally or vertically.
Approvals: Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 25
and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 12.
Standard Finish: Plain or Electro-Galvanized. Contact B-Line for alternative finishes
and materials.
Part No.
Rod Thread
(mm)
Rod
Thread Size
A
in.
(mm)
Lbs.
(kN)
Lbs.
(kg)
31/32"
Pipe Size
in.
Design Load
Approx. Wt./100
B3198R-3/8
3/8"
(10)
3/8"-16
(24.6)
180
(.80)
12
(5.4)
B3198R-1/2
1/2"
(15)
3/8"-16
11/16"
(27.0)
180
(.80)
16
(7.2)
B3198R-3/4
3/4"
(20)
3/8"-16
17/32"
(30.9)
180
(.80)
18
(8.1)
1"
(25)
3/8"-16
111/32"
(34.1)
180
(.80)
24
(10.9)
B3198R-11/4
11/4"
(32)
3/8"-16
119/32"
(39.7)
180
(.80)
29
(13.1)
B3198R-11/2
11/2"
(40)
3/8"-16
123/32"
(43.6)
180
(.80)
32
(14.5)
(50)
3/8"-16
2"
(50.8)
180
(.80)
39
(17.7)
(65)
1/2"-13
211/32"
(59.5)
300
(1.33)
115
(52.1)
223/32"
(69.0)
300
(1.33)
140
(63.5)
311/32"
(84.9)
300
(1.33)
160
(72.6)
B3198R-1
B3198R-2
B3198R-21/2
2"
21/2"
B3198R-3
3"
(80)
1/2"-13
B3198R-4
4"
(100)
1/2"-13
63
Pipe Hangers
B3198HCT - Hinged Extension Split Pipe Clamp (TOLCO Fig. 301CT)
A
(Rod Size)
Hanger Rod
Not Included

Function: A rigid support to suspend tubing
horizontally or vertically.

WW-H-171E & A-A-1192A, Type 25 and Manufacturers
Standardization Society ANSI/MSS SP-69 & SP-58,
Type 12.
Tubing Size
in.
(mm)
Rod Size
A
in.
(mm)
Lbs.
(kN)
Lbs.
(kg)
B3198HCT-1/2
1/2"
(15)
3/8"-16
5/8"
(15.9)
180
(.80)
(3.6)
B3198HCT-3/4
3/4"
(20)
3/8"-16
13/16"
(20.6)
180
(.80)
10
(4.5)
(25)
3/8"-16
15/16"
(23.8)
180
(.80)
10
(4.5)
(32)
3/8"-16
11/8"
(28.6)
180
(.80)
14
(6.3)
(40)
3/8"-16
19/16"
(39.7)
180
(.80)
18
(8.1)
(50)
3/8"-16
17/8"
(47.6)
180
(.80)
23
(10.4)
Part No.
B3198HCT-1
1"
B3198HCT-11/4
11/4"
B3198HCT-11/2
11/2"
B3198HCT-2
2"
Design Load
Approx. Wt./100

Function: A rigid support to suspend tubing horizontally or

vertically.
Tubing Size
Part No.
in.
B3198RCT-3/8
3/8"
B3198RCT-1/2
1/2"
B3198RCT-3/4
3/4"
Rod Size
A
in.
(mm)
Lbs.
(kN)
Lbs.
(kg)
(10)
3/8"-16
11/16"
(17.5)
180
(.80)
12
(5.4)
(15)
3/8"-16
111/16"
(17.5)
180
(.80)
12
(5.4)
(20)
3/8"-16
7/8"
(22.2)
180
(.80)
14
(6.3)
11/16"
(7.7)
(mm)
Design Load
Approx. Wt./100
(25)
3/8"-16
(27.0)
180
(.80)
17
B3198RCT-11/4
11/4"
(32)
3/8"-16
11/8"
(28.6)
180
(.80)
17
(7.7)
B3198RCT-11/2
11/2"
(40)
3/8"-16
15/16"
(33.3)
180
(.80)
22
(10.0)
2"
(50)
3/8"-16
11/2"
(38.1)
180
(.80)
26
(11.8)
B3198RCT-1
B3198RCT-2
1"
64
A
(Thread Size)
Hanger Rod
Not Included
Pipe Hangers
B3198RCT - Extension Split Pipe Clamp
Pipe Hangers
B3175 - Ring and Bolt Hanger
Bolt and Nut Included

Bolt Size

Steel Size

Function: Designed for suspending light-weight non-insulated pipe.
(Use with B3222 eye socket or B3224 hanger adjuster).
Standard Finish: Pre-Galvanized

Pipe Size
Part No.
in.
(mm)
in.
Steel Size
(mm)
Bolt Size
18 Ga. x
in.
Design Load
Approx. Wt./100
(mm)
Lbs.
(kN)
Lbs.
(kg)
7/8"
B3175-1/2
1/2"
(15)
11/16"
(27.0)
1/4"-20
(1.2 x 22.2)
275
(1.22)
7.5
(3.4)
B3175-3/4
3/4"
(20)
13/16"
(30.2)
1/4"-20
18 Ga. x 7/8"
(1.2 x 22.2)
275
(1.22)
8.0
(3.6)
1"
(25)
15/16"
(33.3)
1/4"-20
18 Ga. x 7/8"
(1.2 x 22.2)
275
(1.22)
9.0
(4.1)
B3175-11/4
11/4"
(32)
11/2"
(38.1)
1/4"-20
18 Ga. x 7/8"
(1.2 x 22.2)
275
(1.22)
10.5
(4.7)
B3175-11/2
11/2"
(40)
15/8"
(41.3)
1/4"-20
18 Ga. x
7/8"
(1.2 x 22.2)
275
(1.22)
11.5
(5.2)
B3175-1
B3175-2
(50)
113/16"
(46.0)
1/4"-20
18 Ga. x
7/8"
(1.2 x 22.2)
275
(1.22)
13.0
(5.9)
21/2"
(65)
25/16"
(58.7)
5/16"-18
16 Ga. x
11/4"
(1.5 x 31.7)
500
(2.22)
30.0
(13.6)
3"
(80)
25/8"
(66.7)
5/16"-18
16 Ga. x 11/4"
(1.5 x 31.7)
500
(2.22)
35.0
(15.9)
31/2"
(90)
27/8"
(73.0)
5/16"-18
16 Ga. x 11/4"
(1.5 x 31.7)
500
(2.22)
38.5
(17.4)
4"
(100)
31/8"
(79.4)
5/16"-18
16 Ga. x 11/4"
(1.5 x 31.7)
500
(2.22)
42.0
(19.0)
(125)
35/8"
(92.1)
5/16"-18
16 Ga. x
11/4"
(1.5 x 31.7)
500
(2.22)
51.0
(23.1)
(150)
43/16"
(106.4)
5/16"-18
16 Ga. x
11/4"
(1.5 x 31.7)
500
(2.22)
58.5
(26.5)
2"
B3175-21/2
B3175-3
B3175-31/2
B3175-4
B3175-5
5"
B3175-6
6"
B3175CT - Ring and Bolt Hanger, DURA-COPPER Coated

Pipe Hangers
Bolt and Nut Included
Size Range:
1/2 (15mm)
Bolt Size
to 4 (100mm) pipe
Steel Size

Function: Designed for suspending copper tubing allowing for vertical
adjustment. (Use with B3222 eye socket or B3224 hanger adjuster).

Tubing Size
Part No.
Steel Size
Bolt Size
(mm)
in.
(mm)
B3175CT-1/2
1/2"
(15)
15/16"
(33.3)
1/4"-20
x 1"
1/16"
x 7/8"
(1.6 x 22.2)
B3175CT-3/4
3/4"
(20)
13/8"
(34.9)
1/4"-20
x 1"
1/16"
x 7/8"
(25)
13/16"
(30.2)
1/4"-20
x 1"
1/16"
7/8"
(32)
15/16"
(33.3)
1/4"-20
x 1"
1/16"
7/8"
(40)
11/2"
(38.1)
1/4"-20
x 1"
1/16"
7/8"
7/8"
B3175CT-1
1"
B3175CT-11/4
11/4"
B3175CT-11/2
11/2"
B3175CT-2
B3175CT-21/2
B3175CT-3
B3175CT-31/2
B3175CT-4
in.
Design Load
in.
(mm)
Lbs.
Approx. Wt./100
(kN)
Lbs.
(kg)
200
(.89)
(3.6)
(1.6 x 22.2)
200
(.89)
(3.6)
(1.6 x 22.2)
200
(.89)
(3.6)
(1.6 x 22.2)
200
(.89)
10
(4.5)
(1.6 x 22.2)
200
(.89)
11
(5.0)
2"
(50)
115/16"
(49.2)
1/4"-20
x 1"
1/16"
(1.6 x 22.2)
200
(.89)
11
(5.0)
21/2"
(65)
23/16"
(55.6)
1/4"-20
x 1"
1/16"
x 7/8"
(1.6 x 22.2)
200
(.89)
12
(5.4)
3"
(80)
211/16"
(68.3)
1/4"-20
x 1"
1/16"
x 7/8"
(1.6 x 22.2)
200
(.89)
14
(6.3)
(90)
215/16"
(74.6)
1/4"-20
x 1"
1/16"
7/8"
(1.6 x 22.2)
200
(.89)
16
(7.2)
(100)
33/16"
(81.0)
1/4"-20
x 1"
1/16"
7/8"
(1.6 x 22.2)
200
(.89)
18
(8.1)
31/2"
4"
65
Pipe Hangers
B3190 Return Line Offset J-Hook (TOLCO Fig. 40)
Material: Steel (Stainless steel available)
Function: Recommended for supporting light pipe runs with a 1" (25.4) offset from mounting surfaces.
Standard Finish: Plain or Electro-Galvanized. Contact B-Line for alternative finishes and materials.
Pipe Size
Part No.
Design Load
Approx. Wt./100
in.
(mm)
Lbs.
(kN)
Lbs.
(kg)
B3190-1/2
1/2"
(15)
200
(.89)
54
(24.5)
B3190-3/4
3/4"
(20)
200
(.89)
55
(24.9)
B3190-1
1"
(25)
200
(.89)
78
(35.4)
B3190-11/4
11/4"
(32)
200
(.89)
85
(38.5)
B3190-11/2
11/2"
(40)
200
(.89)
90
(40.8)
B3190-2
2"
(50)
200
(.89)
98
(44.4)
(65)
350
(1.55)
126
(57.1)
3"
(80)
350
(1.55)
136
(61.7)
31/2"
(90)
350
(1.55)
147
(66.8)
B3190-4
4"
(100)
450
(2.00)
235
(106.6)
B3190-5
5"
(125)
450
(2.00)
350
(158.7)
B3190-6
6"
(150)
450
(2.00)
383
(173.7)
B3190-8
8"
(200)
450
(2.00)
605
(274.4)
B3190-3
B3190-31/2
9/16"
Dia.
(14.3)
5"
21/2"
B3190-21/2
1"
(25.4)
(127.0)
Pipe Hangers
B3191 Return Line Straight J-Hook (TOLCO Fig. 41)

Material: Steel (Stainless steel available)
Function: Recommended for supporting light pipe runs flush with the mounting surfaces.
Standard Finish: Plain or Electro-Galvanized. Contact B-Line for alternative finishes and materials.
9/16"
Pipe Size
Design Load
Approx. Wt./100
Part No.
in.
(mm)
Lbs.
(kN)
Lbs.
(kg)
B3191-1/2
1/2"
(15)
200
(.89)
54
(24.5)
B3191-3/4
3/4"
(20)
200
(.89)
55
(24.9)
1"
(25)
200
(.89)
76
(34.5)
B3191-1
11/4"
(32)
200
(.89)
82
(37.2)
B3191-11/2
11/2"
(40)
200
(.89)
87
(39.4)
2"
(50)
200
(.89)
96
(43.5)
21/2"
(65)
350
(1.55)
124
(56.2)
3"
(80)
350
(1.55)
134
(60.8)
31/2"
(90)
350
(1.55)
145
(65.8)
B3191-4
4"
(100)
450
(2.00)
153
(69.4)
B3191-5
5"
(125)
450
(2.00)
348
(157.8)
B3191-6
6"
(150)
450
(2.00)
381
(172.8)
B3191-8
8"
(200)
450
(2.00)
600
(272.1)
B3191-2
B3191-21/2
B3191-3
B3191-31/2
5"
(127.0)
B3191-11/4
66
Dia.
(14.3)
Pipe Hangers
Fig. 120RWA - (Model B) Retrofit Wrap Around U Hanger Clamp
Size Range: 1" (25mm) thru 6" (150mm) pipe
Material: Steel
Function: Designed to restrain movement of the pipe within standard
U-hangers as required by NFPA 13. Where retrofit capability is crucial, the
Fig. 120RWA is a labor efficient alternative to the standard Cooper B-Line
Fig. 120W wrap around U-hanger.
Features Installs easily by tightening two hex nuts. Features a unique
bracing slot that locks onto a standard U-hanger to become a solid unit that
will stabilize the pipe during seismic activity or sprinkler head activation.
Designed to be used in retrofit or new construction applications. Will clamp
to existing U-Hangers without restriction to leg angle.
Approvals: Underwriters Laboratories listed in the USA (UL) and Canada
(cUL) as a restrainer. Included in our Seismic Restraints Catalog approved
by the State of California Office of Statewide Health Planning and
Development (OSHPD). For additional load, spacing and placement
information relating to OSHPD projects, please refer to the Cooper B-Line
Seismic Restraint Systems Guidelines. NFPA 13 (2010) 9.3.6.3.
Finish: Plain and Galvanized. Contact B-Line for alternative finishes and
materials.
Order By: Part number, type numbers and pipe size
Ordering Note: Order by the following type and pipe size:
Type 1 (1" (25mm) and 11/4" (32mm) pipe size)
Type 2 (11/2" (40mm) and 2" (50mm) pipe size)
Type 3 (21/2" (65mm) and 3" (80mm) pipe size)
Type 4 (4" (100mm) pipe size)
Type 6 (5" (125mm) and 6" (150mm) pipe size)
Pipe Hangers
Important Note: The bracing slot feature is sized to fit the U-Hanger rod
schedule as required by NFPA 13 as follows:
5/16" (7.9mm) rod for up to 2" (50mm) pipe
3/8" (9.5mm) rod for 21/2" (65mm) - 6" (160mm)
pipe
For other rod size requirements consult factory.
Type
Part No.
120RWA-TYPE1-1
Pipe Size
in.
(mm)
1"
(20)
120RWA-TYPE1-11/4
11/4"
(25)
120RWA-TYPE2-11/2
120RWA-TYPE2-2
2
2
11/2"
2"
(40)
3
3
21/2"
(65)
3"
(80)
4
4
6
6
31/2"
(90)
4"
5"
6"
(100)
120RWA-TYPE3-21/2
120RWA-TYPE3-3
120RWA-TYPE4-31/2
120RWA-TYPE4-4
120RWA-TYPE6-5
120RWA-TYPE6-6
(50)
(125)
(150)
67
Pipe Hangers
Fig. 120 - U Hanger
Size Range: Size 3/4" (20mm) thru 8" (200mm) pipe
Material: Steel
Function: Used to support piping from wood beams
where no contraction is expected. Used extensively in
automatic fire sprinkler systems.
Approvals: Meets or exceeds the requirements of

National
Fire Protection Association (NFPA), Pamphlet 13. Included
in our Seismic Restraints Catalog approved by the State of
California Office of Statewide Health Planning and
Development (OSHPD). For additional load, spacing and
placement information relating to OSHPD projects, please
refer to the Seismic Restraint Systems Guidelines.
Length
(Specify)

Finish: Plain. Contact B-Line for alternative finishes and
materials.
Pipe Size
Part No.
120-3/4
120-1
Fastener Size
in.
(mm)
in.
(mm)
3/4"
(20)
5/16"
(7.9)
(25)
5/16"
1"
Max. Rec. Load***

lbs.
(kN)
16 x 2*
250
(1.11)
(7.9)
16 x 2*
250
(1.11)
120-11/4
11/4"
(32)
5/16"
(7.9)
16 x 2*
250
(1.11)
120-11/2
11/2"
(40)
5/16"
(7.9)
16 x 2*
250
(1.11)
2"
(50)
5/16"
(7.9)
16 x 2*
250
(1.11)
21/2"
(65)
3/8"
(9.5)
3/8
x 21/2**
320
(1.42)
(80)
3/8"
(9.5)
3/8
21/2**
320
(1.42)
(90)
3/8"
(9.5)
3/8
21/2**
560
(2.49)
(100)
3/8"
(9.5)
1/2
x 3**
560
(2.49)
(12.7)
1/2
x 3**
560
(2.49)
120-2
120-21/2
120-3
120-31/2
120-4
3"
31/2"
4"
Pipe Hangers
Order By: Part number, pipe size, length and finish
120-5
5"
(125)
1/2"
120-6
6"
(150)
1/2"
(12.7)
1/2
x 3**
760
(3.38)
120-8
8"
(200)
1/2"
(12.7)
5/8
x 3**
--
(--)
* Drive Screw
** Lag Bolt
*** With minimum safety factor of 5
Fastener schedule per NFPA
68
Pipe Hangers
Fig. 120MJ - Mutt & Jeff U Hanger
Material: Steel
Function: Used to support piping from wood beams where
no
contraction is expected. Used extensively in automatic fire
sprinkler systems. Fig. 120MJ is used when the wood beam is
on a diagonal.

materials.
Length
(Specify)
Order By: Part number, side length and finish

Pipe Size
Part No.
in.
Fastener Size
(mm)
in.
(mm)
(7.9)
120MJ-3/4
3/4"
(20)
5/16"
120MJ-1
120MJ-11/4
120MJ-11/2
120MJ-2
120MJ-21/2
120MJ-3
120MJ-31/2
120MJ-4
120MJ-5
120MJ-6
120MJ-8
1"
11/4"
11/2"
2"
21/2"
3"
31/2"
4"
5"
6"
8"
(25)
5/16"
(7.9)
(32)
5/16"
(7.9)
(40)
5/16"
(7.9)
(50)
5/16"
(7.9)
(65)
3/8"
(9.5)
(80)
3/8"
(9.5)
(90)
3/8"
(9.5)
(100)
3/8"
(9.5)
(125)
1/2"
(12.7)
(150)
1/2"
(12.7)
(200)
1/2"
(12.7)
16 x 2*
16 x 2*
16 x 2*
16 x 2*
16 x 2*
3/8 x 21/2**
3/8 x 21/2**
3/8 x 21/2**
1/2 x 3**
1/2 x 3**
1/2 x 3**
5/8 x 3**
Max. Rec. Load***

lbs.
(kN)
250
250
250
250
250
320
320
560
560
560
760
--
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
(1.42)
(1.42)
(2.49)
(2.49)
(2.49)
(3.38)
(--)
* Drive Screw
** Lag Bolt
Pipe Hangers
Fig. 120W - Wrap Around U Hanger

Material: Steel
Function: Required for automatic fire protection agencies to
be used on the end of branch lines to prevent pipe from
whipping vertical and striking ceiling or beam.

materials.
Order By: Part number, side length and finish
Length
(Specify)
Pipe Size
Part No.
in.
Fastener Size
(mm)
in.
(mm)
(7.9)
120W-3/4
3/4"
(20)
5/16"
120W-1
120W-11/4
120W-11/2
120W-2
1"
1
1 /4"
11/2"
2"
(25)
5/16"
(7.9)
(32)
5/16"
(7.9)
(40)
5/16"
(7.9)
(50)
5/16"
(7.9)
16 x 2*
16 x 2*
16 x 2*
16 x 2*
16 x 2*
Max. Rec. Load***

lbs.
(kN)
250
250
250
250
250
(1.11)
(1.11)
(1.11)
(1.11)
(1.11)
* Drive Screw
69
Pipe Hangers
A
(Rod Size)
B3262 Light Duty Spring Hanger

Rod Size Range: 3/8-16 to 3/4-10
Material: Steel
Service: Designed for use with a light piping system where
vertical movement does not exceed 11/4" (31.7).
D

Order By: Part number.
B
A
(Rod Size)
Spring
Color
In
B
(mm)
B3262-3/8
3/8"-16
Brown
2"
B3262-1/2
1/2"-13
B3262-5/8
5/8"-11
Red
B3262-3/4
3/4"-10
Orange
Black
C
(mm)
In
(mm)
(50.8)
23/4"
(69.8)
41/2"
(114.3)
(50.8)
23/4"
(69.8)
41/2"
(114.3)
2"
(50.8)
23/4"
(69.8)
41/2"
(114.3)
2"
(50.8)
3"
(76.2)
7"
(177.8)
2"
Spring Deflection
Rated Load
Part No.
In
(mm)
Lbs.
B3262-3/8
1.20
(30.1)
B3262-1/2
1.10
(27.7)
B3262-5/8
1.00
B3262-3/4
1.20
In
Approx. Wt./100
(kN)
Lbs.
(kg)
100-150
(.44 - .67)
390
(176.2)
150-250
(.67 - 1.11)
410
(186.0)
(25.4)
350-450
(1.56 - 2.00)
470
(213.2)
(30.1)
600-750
(2.67 - 3.34)
1240
(562.6)
70
Pipe Hangers
Rod Size
A
Part No.
Pipe Hangers
BH-2-4, BH-5-8, BH-9-12 - Parallel Strap Hangers
BH-2-4-R, BH-5-8-R, BH-9-12-R - Right Angle Strap Hangers
Material: Steel
Function: The Parallel Strap Hanger series is
designed for suspending up to 1" (50.8) wide
straps parallel to beams.
The Right Angle Strap Hanger series is designed
for suspending up to 1" (50.8) wide straps at right
angle to the beam.
Note: Install clip to beam with hammer.
Standard Finish: Zinc Phosphate
Part No.
Parallel
Right Angle
BH-2-4
BH-5-8
BH-9-12
Right Angle
Strap
Parallel
Strap
Flange Thickness
In.
BH-2-4-R
1/8"
BH-5-8-R
5/16"
BH-9-12-R
9/16"
Approx. Wt./100
BH-2-12
BH-2-12R
Maximum Load
(mm)
Lbs.
(kN)
Lbs.
to
1/4"
(kg)
Lbs.
(kg)
(3.2 to 6.3)
200
(.89)
4.5
(2.0)
6.0
(2.7)
to
1/2"
(7.9 to 12.7)
200
(.89)
5.0
(2.3)
6.5
(2.9)
to
3/4"
(14.3 to 19.0)
200
(.89)
5.5
(2.5)
7.0
(3.2)
Design Load is a static straight down load.
BL1400 - Hanger
Size Range:
1/2 (15mm)
to 4 (100mm) pipe
Pipe Hangers
Material: Steel
Pipe Size
T
Function: Designed to support or suspend light

duty stationary pipe runs.
Standard Finish: Electro-Galvanized

Order By: Part number.
Hole Size B
Pipe Size
Part No.
Approx. Wt./100
In.
(mm)
In.
(mm)
In.
(mm)
In.
(mm)
In.
(mm)
Lbs.
(kg)
BL1400
1/2"
(15)
29/32"
(23.0)
9/32"
(7.1)
16 Ga.
(1.5)
3/4"
(19.0)
(2.7)
BL1410
3/4"
(20)
31/32"
(24.6)
9/32"
(7.1)
16 Ga.
(1.5)
3/4"
(19.0)
(3.2)
BL1420
1"
(25)
11/4"
(31.7)
9/32"
(7.1)
16 Ga.
(1.5)
3/4"
(19.0)
(3.6)
BL1430
11/4"
(32)
113/32"
(35.7)
9/32"
(7.1)
18 Ga.
(1.5)
7/8"
(22.2)
10
(4.5)
BL1440
11/2"
40)
55/8"
(41.3)
11/32"
(8.7)
16 Ga.
(1.5)
1"
(25.4)
17
(7.7)
BL1450
2"
(50)
17/8"
(47.6)
11/32"
(8.7)
16 Ga.
(1.5)
11/4"
(31.7)
25
(11.3)
BL1460
21/2"
(65)
21/16"
(52.4)
11/32"
(8.7)
16 Ga.
(1.5)
11/4"
(31.7)
26
(11.8)
BL1470
3"
(80)
21/2"
(63.5)
11/32"
(8.7)
16 Ga.
(1.5)
11/4"
(31.7)
33
(14.9)
BL1480
31/2"
(90)
23/4"
(69.8)
11/32"
(1.5)
11/4"
(31.7)
36
(16.3)
(100)
31/2"
(88.9)
11/32"
(1.5)
11/4"
(31.7)
40
(18.1)
BL1490
4"
(8.7)
(8.7)
16 Ga.
16 Ga.
Designed for positioning only, no load rating.
71
Pipe Hangers
Pipe Hangers
72

TOLCO Pipe Hangers

Uploaded by

Copyright:

Available Formats

TOLCO Pipe Hangers

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

TOLCO Pipe Hangers

Uploaded by

Copyright:

Available Formats

Pipe Hangers

Approvals (as noted)

Pipe Hangers & Supports

Function: Used as a spacer at a seismic brace location to

Pipe Hangers & Supports

SLIDE-RITE Clevis Hanger Features

*SLIDE-RITE Clevis Hanger

Pat. No. 5,848,770

Nominal Pipe Size

Pipe Hangers & Supports

B3100 - Standard Clevis Hanger (TOLCO Fig.1)

Pipe Hangers & Supports

Approvals: Conforms to Federal Specification

Standard Finish: Plain & Electro-Galvanized.

Order By: Part number and finish.

105/8" (269.9) 71/16" (179.4) 513/16" (147.6)

B3102-10 11.10 (281.9)

B3102-12 13.20 (335.3)

B3102-14 15.30 (388.6)

203/8" (517.5) 125/8" (320.7) 113/16" (281.6)

B3102-16 17.40 (441.9)

231/2" (569.9) 1411/16" (373.1) 127/8" (327.0)

B3102-18 19.50 (495.3)

B3102-20 21.60 (548.6)

B3102-24 25.80 (655.3)

(457.2) 115/16" (287.3)

(211.1) 513/16" (147.6)

(400.0) 1315/16" (354.0)

(838.2) 191/8" (508.0)

(127.0) 413/16" (122.2)

Pipe Hangers & Supports

Size Range: 3/4 (20mm) thru 12 (300mm) pipe

Function: Recommended for the suspension of insulated

Maximum Temperature: 650F (343C).

Standard Finish: Plain, Electro-Galvanized or Hot Dip

Nominal Pipe Size

Pipe Hangers & Supports

Insulation Material: 3/16 (4.8mm) Felt

Approvals: Underwriter's Laboratories Listed in the USA

Maximum Temperature: 650F (343C).

Order By: Part number and finish.

Pipe Hangers & Supports

Approvals: Conforms Manufacturers Standardization

Standard Finish: Electro-Plated. Contact B-Line

Order By: Part number and finish.

(11.1) 111/16" (42.9)

(11.1) 113/16" (46.0)

(11.1) 21/16" (52.4)

215/16" (74.6) 115/16" (49.2)

413/16" (122.2) 29/16"

(14.3) 51/16" (128.6)

73/4" (196.8) 39/16"

(14.3) 513/16" (147.6)

93/16" (233.4) 315/16" (100.0)

(14.3) 615/16" (176.2)

Pipe Hangers & Supports

Standard Finish: Plain or Electro-Galvanized

Order By: Part number and finish.

Pipe Hangers & Supports

Standard Finish: Plain & Electro-Galvanized.