Machining Solidcam
Machining Solidcam
Machining Solidcam
Accept the default part file name and path and Click OK.
Select NTU_MAZAK_MPOS as our post processor. Leave the fields of Program Number & Subroutine number with the default settings.
Click Define button in the Coordinate System tab to set the coordinate system for this part.
In the Place CoordSys origin to section, select Top center of model box from the drop down.
Click
Change the Tool start level and Clearance level values in the CoordSys Data pop up shown in the image.
Click OK.
Click
Click
Select 3D Model from the drop down in the Defined by section. This will clear the previously defined solids.
Click
Go to the Feature Manager Design Tree > Stock > Hide Components.
Click OK.
Right click Setup > Add Milling Operation > Sim 5 Axis Milling.
Click Geometry.
Click
Click
Click Margins.
Click OK.
Click
Click Select.
Click Advanced.
Click OK.
Click Link.
Select Use LeadIn and Use Lead Out from the drop down lists.
Click -In.
Click OK.
Click -Out.
Click OK.
Note: If you are using SP1, you need to click Transformation as Roughing and More is changed to Transformation SP1 onwards.
Click OK.
Click Link.
We will now create the roughing strategy for the entire stock that has to be removed.
Click Geometry.
Select the Type as Full, start and end at exact surface edges.
Click Link.
Click
Click OK.