Insulation Roofs P11 40
Insulation Roofs P11 40
Insulation Roofs P11 40
ROOFS
Insulation is typically used between and over joists. If using the loft for storage or living purposes it may be better to look at insulating the rafters. APPLICATIONS:
1 2 3
12
LOFT
Loft insulation is traditionally laid at the ceiling joist level with the attic space above a cold zone. Building Regulations suggests a minimum installed thickness of 270mm laid in between and across the ceiling joists. This is usually 100mm between and 170mm across. Fitting 2 layers in this way removes the cold bridging of the ceiling joists and ensures there are no gaps in the insulation layer and preventing the escape of warm air into the cold attic space above.
RAFTER
Rafter insulation is normally installed between, between and under or between and over the rafters to comply with Part L of the Building Regulations. This will create a warm zone below the roof which can be used as a room, hence the term Room-in-Roof.
FLAT
Flat roof insulation normally requires a high degree of compression resistance to allow foot trafc for maintenance.
www.buildcenter.co.uk
MATERIALS:
PIR
PIR provides premium thermal performance and is more effective than most other traditional insulation types. PIR is made by blending together materials to form a rigid foam insulation product. The heat generated during the reaction enable gases to evaporate and become trapped within cells delivering premium thermal performance characteristics. Offering superior thermal performance to most products commonly available, PIR is available in an extensive range of thicknesses suitable for a wide range of applications.
SHeeps WOOl
Sheeps wool insulation provides a high performance and sustainable solution to both consumption of energy and the effects of climate change. Wool actually generates heat when it absorbs moisture.
PHenOlic FOam
Phenolic foams have a high strength / density relationship as they are lightweight but strong, supplied as rigid foam boards and have the highest density of rigid board products. It has the advantage of being a very thin board.
MUlTi-laYereD FOils
These consist of multiple sheets of aluminised polyester separated by thin sheets of polyethylene foam. They are lightweight and exible membranes, to be effective the outer faces must face an unventilated cavity in the construction.
LOFT ROLL
INSULATION
4 in 1 Benets
Thermal Insulation
Rockwool does not slump or shrink with time, ensuring that it maintains its thermal efficiency for the lifetime of your home.
Sound Insulation
Rockwool is denser than ordinary lightweight insulation ensuring a tighter fit and exceptional sound insulation for suspended ceilings.
Installing Rockwool insulation reduces energy
Fire Insulation
Rockwool Roll has an A1 re classication, is non-combustible and will not melt, burn or give off toxic fumes in re.
Sustainable Insulation
loss. Rockwool is produced from a natural material, is water repellent and recyclable.
www.rockwool.co.uk
ROOFS
ApplicaTiOn:
LOFTS RAFTEr FlAT
ROLL
MaTerial:
ROCK MINERAL WOOL
Rockwool Roll is a medium density multi-application insulation mat. This versatile Roll is suitable for thermal insulation of roof spaces in domestic, commercial and industrial buildings. It is also useful for improving the acoustic performance of suspended ceilings. Roll is produced in 1200mm width. The packaging provides cutting guidelines should the product be required in 400mm or 600mm widths. By cutting through the product with a long serrated blade, this will ensure the material can be cut to the desired widths. Alternatively, Rollbatt is supplied pre-cut to 400mm (x3) or 600mm (x2) widths.
Cat.no Description Thickness Width mm mm 100 150 170 1200 1200 1200 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 4800 3200 2800 6 4 3 2.27 3.41 3.86 0.044 0.044 0.044 5.76 3.84 3.36
ApplicaTiOn:
LOFTS RAFTEr FlAT
FLEXI
Turn to page 48 to nd out more about Rockwool Flexi
MaTerial:
ROCK MINERAL WOOL
Cat.no Description Thickness mm 70 120 140 50 100 60 60 60 140 90 100 75 50 Width mm 600 600 400 400 400 400 600 400 600 600 600 600 600 Length mm 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 Qty R-Value per pack 8 5 4 12 6 10 12 12 4 6 6 8 12 Thermal Conductivity W/mk M2 per pack 5.76 4.32 2.88 5.76 2.88 4.80 8.64 5.76 2.88 4.32 4.32 5.76 8.64
15
N33816 N34604 N39770 N39908 N39909 N08944 N08945 N08946 H63988 H64415 H64594 H64595 H64597
RW FLEXI RW FLEXI RW FLEXI RW FLEXI RW FLEXI RW FLEXI RW FLEXI RW FLEXI RW FLEXI RW FLEXI RW FLEXI RW FLEXI RW FLEXI
Thermal 1.84 Performance 3.16 Rockwool Flexi 4.00 has a thermal 1.32 conductivity of 2.63 0.038 W/mK 1.58 when tested to 1.58 EN13162. At 140 1.58 mm thickness, 4.00 Rockwool Flexi 2.37 has a thermal 2.63 conductivity of 1.97 0.035W/mK. 1.32
ROOFS
ApplicaTiOn:
MaTerial:
ROCK MINERAL WOOL
Rockwool Rigid, Semi-rigid and Flexible Slabs are high quality resin bonded Rockwool Slabs that can be used for thermal, acoustic and re insulation. They are manufactured in a variety of thicknesses and densities to suit most requirements. They are suitable for many applications including thermal insulation for oors, walls, roofs and boiler rooms. Ventilation plant in all types of buildings, offshore platforms and ships, acoustic ceilings and partition panels. Excellent thermal, acoustic and re insulation. Rockwool Slabs conform to BS EN 13162: 2001. Thermal insulation products for buildings factory made mineral wool (MW) products specication, and satisfy the requirements of BS 5422 Method for specifying thermal insulating materials for pipes, tanks, vessels ductwork and equipment.... Fire Rockwool RW slabs are certied by Lloyds Register of Shipping as non-combustible materials for use on: Fixed offshore installations M ED classed ships DTLR MCA Approval Rockwool RW slabs are rated non-combustible in accordance with ISO 1182 and IMO A. 799. Water resistance Rockwool RW slabs are highly water repellent. Where it is necessary to maintain water repellency subsequent to heating at elevated temperatures, the use of WRG grade slabs is recommended. Acoustics Rockwool stone wool works in two distinct ways to reduce noise, either by impeding the transmission of sound through an element of the structure or by absorption of sound at the surface. Noise absorption is expressed as a factor between 0 and 1.0. The more sound that a surface absorbs, the higher its absorption coefcient.
Values (W/mk)
RWA45 0.040 0.050 0.063
16
www.buildcenter.co.uk
ROOFS
N08914 N08915 N08916 N08917 N08918 N08919 N08920 N08921 N08922 N08923 N08924 N08925 N08926 N08927 N08928 N08929 N08930 N08931 H46939 N08932 N08933 N08934 N08935 N08941 N08942 N08943 N08939 N08940
RW RW3 SLAB RW RW3 SLAB RW RW3 SLAB RW RW3 SLAB RW RW3 SLAB RW RW3 SLAB RW RW3 SLAB RW RW4 SLAB RW RW4 SLAB RW RW4 SLAB RW RW5 SLAB RW RW5 SLAB RW RW5 SLAB RW RW5 SLAB RW RW5 SLAB RW RW5 SLAB RW RW5 SLAB RW RW6 SLAB RW RW6 SLAB RW RW6 SLAB RW RW6 SLAB RW RW6 SLAB RW RWA45 SLAB RW RWA45 SLAB RW RWA45 SLAB RW RWA45 SLAB RW RWA45 SLAB RW RWA45 SLAB
The advantages of Semi-Rigid & Flexible Slabs are: Water repellent Resists high temperatures Easy to handle and install Cost effective No maintenance Black or white tissue and aluminium foil Facings available
17
ROOFS
ApplicaTiOn:
MaTerial:
ROCK MINERAL WOOL
DuoRock roong boards offer non combustible thermal and acoustic insulation solutions at economic cost to the contractor. The dual density roong boards are manufactured with a high density, robust top surface. The appropriate DuoRock products may be used for mechanically fastened or ballasted single ply membrane systems. The advantages of DuoRock are: Non combustible Faster to install Fewer insulation fasteners Single thickness solutions Cantilever performance Dimensionally stable Fully tested systems Suitable for new build and refurbishment
ApplicaTiOn:
LOFTS RAFTEr FlAT
MaTerial:
ROCK MINERAL WOOL
The Hardrock Dual Density range of roong boards are manufactured using Rockwools unique dual density technology. Produced with a robust, high density top surface, the products therefore exhibit excellent point load compressive resistance. The boards offer the ideal non combustible acoustic and thermal insulation solution for most types of roof deck, when combined with single ply or high performance built-up roong systems. The advantages of Hardrock Dual Density Roong Boards are: High strength Improved point load compressive resistance Non-combustible Fire resistance up to 2 hours -Tested and assessed by BRE/LPC -Listed as LPCB approved product - LPS 1181: Part 1 Grade EXT-A rated constructions Acoustic performance -Excellent sound reduction and absorption -Rain noise solutions -Solutions to BREEAM Schools 2006 Dimensionally stable Cantilever performance Suitable for new build and refurbishment
18
www.buildcenter.co.uk
ROOFS
ApplicaTiOn:
LOFTS RAFTEr FlAT
ROcKFall
MaTerial:
ROCK MINERAL WOOL
The Rockfall Warm Pitched Roof Insulation system provides an effective means of insulating the roof space at rafter level, and in a Mansard application allows a at warm roof to be continued through to the pitched roof area. The system is adaptable to almost any pitched roof conguration and has been specically produced for industrial, commercial and domestic projects. The advantages of RockFall are: Non-combustible warm pitched roof system A breathable and vapour permeable system Reduces risk of condensation on roof timbers A uniquely re safe warm pitched roof system H abitable loft makes for economic use of heated building space P rovides an excellent acoustic barrier to external noise pollution
ApplicaTiOn:
LOFTS RAFTEr FlAT
AcOUStic MembraNe
MaTerial:
ROCK MINERAL WOOL
Rockwool Acoustic Membrane is a exible, high-density polymer mass layer. The product, when combined with Rockwool insulation products, offers both high performance and economic acoustic solutions for at roong and built-up metal roong systems (e.g. standing seam). An ideal acoustic solution from the Rockwool SoundPro range, for buildings requiring high levels of acoustic performance. These include schools, hospitals, cinemas, airports, concert halls, stadia, retail, leisure developments etc. The advantages of Acoustic Membrane are: Excellent acoustic properties Enhances low frequency performance Easy to cut and install on site Available as a roll Fewer joints F aster installation F ully tested system C ost effective S uitable for new build and refurbishment
19
ROOFS
Earthwool glass mineral wool rolls are extremely versatile and can be used in applications fromloftinsulation to HVAC and industrialinsulation. Earthwool glass mineral wool is rot-proof, odourless, non-hygroscopic, does not sustain vermin and will not encourage the growth of fungi, mould or bacteria. It is chemically neutral and does not contain impurities.
Earthwool products utilise ECOSE Technology, which is a revolutionary, new, formaldehydefree binder technology, based on rapidly renewable materials instead of petro-based chemicals. It reduces embodied energy and delivers superior environmental sustainability. The technology has been developed for Knauf Insulations glass and rock mineral wool products, enhancing their environmental credentials without affecting the thermal, acoustic or re performance. Insulation products made with ECOSE Technology contain no dye or articial colours the colour is completely natural.
ApplicaTiOn:
MaTerial:
GLASS MINERAL WOOL
Earthwool CarbonZero Loft Roll 44: Earthwool CarbonZero Loft Roll 44 is a exible, low density glass mineral wool quilt which is lightweight, exible, resilient and non-combustible. The rolls are 1140mm wide and partially perforated to produce either 2 rolls 570mm wide or 3 rolls 380mm wide. Earthwool CarbonZero Loft Roll is primarily used for the thermal insulation of pitched roofs at ceiling level. However, it can also be used to thermally insulate oors and partitions, or wherever a lightweight mineral wool quilt is required. When used to insulate at ceiling level it is usually laid in two layers, with the rst layer between the joists and the second layer at right angles to the joists.
Cat.no Description Thickness Width mm mm 100 150 170 200 1140 1140 1140 1140 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 12180 8050 7030 5200 24 24 24 24 2.25 3.40 3.85 4.50 0.044 0.044 0.044 0.044 13.89 9.18 8.01 5.93
EARTHWOOL CARBONZERO LOFT ROLL 44 EARTHWOOL CARBONZERO LOFT ROLL 44 EARTHWOOL CARBONZERO LOFT ROLL 44 EARTHWOOL CARBONZERO LOFT ROLL 44
www.buildcenter.co.uk
ROOFS
ApplicaTiOn:
LOFTS RAFTEr FlAT
MaTerial:
GLASS MINERAL WOOL
Earthwool Loft Roll 40: Loft Roll 40is an glass mineral wool roll which is lightweight, exible, resilient and noncombustible. Loft Roll 40 is available in two variants: Loft Roll 40 (Ready-cut) is pre-cut into either 2x570mm widths or 3x380mm widths L oft Roll 40 (Combi-cut) is perforated along its length at half and one third widths to allow easy splitting on-site to the required width For the provision of thermal and acoustic insulation in new build lofts and also loft conversions. Loft Roll 40 is available in thicknesses to suit current Building Regulations and is 1160mm wide, perforated or cut to suit both 400 and 600 roof joist centres. It has the highest achievable re classication of A1.
Cat.no
Description
Thickness Width mm mm 1140 1140 1140 1140 1140 1140 1140 1140 1140
Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 4850 7530 11250 4850 4850 11250 11250 7530 7530 24 24 24 24 24 24 24 24 24 5.00 3.75 2.50 5.00 5.00 2.50 2.50 3.75 3.75 0.040 0.040 0.040 0.040 0.040 0.040 0.040 0.040 0.040 5.53 8.58 12.83 5.53 5.53 12.83 12.83 8.58 8.58
EARTHWOOL LOFT ROLL 40 COMBI-CUT 200 EARTHWOOL LOFT ROLL 40 COMBI-CUT 150 EARTHWOOL LOFT ROLL 40 COMBI-CUT 100 EARTHWOOL LOFT ROLL 40 READY CUT (2x570) 200 EARTHWOOL LOFT ROLL 40 READY CUT (3x380) 200 EARTHWOOL LOFT ROLL 40 READY CUT (3x380) 100 EARTHWOOL LOFT ROLL 40 READY CUT (2x570) 100 EARTHWOOL LOFT ROLL 40 READY CUT (3x380) 150 EARTHWOOL LOFT ROLL 40 READY CUT (2x570) 150
The advantages of Earthwool Loft Roll 40 are: Lightweight and economic insulation quilt P roduced for use with timber joists at 400mm and 600mm centres Partially cut perforations Combines thermal, acoustic and re performance Complies with the requirements of the new Building Regulations Made using recycled glass bottles and with ECOSE technology
21
ROOFS
ApplicaTiOn:
MaTerial:
GLASS MINERAL WOOL
Earthwool Loft Roll 44: Loft Roll 44is an glass mineral wool roll which is lightweight, exible, resilient and noncombustible. Loft Roll 44 is available intwo variants: Loft Roll 44 (Ready-cut) is pre-cut into either 2x570mm widths or 3x380mm widths. L oft Roll 44 (Combi-cut) is perforated along its length at half and one third widths to allow easy splitting on-site to the required width. For the provision of thermal and acoustic insulation in new build lofts and also loft conversions. Loft Roll 44 is available in thicknesses to suit current Building Regulations and is 1140mm wide, perforated or cut to suit both 400 and 600 roof joist centres. It has the highest achievable re classication of A1.
Cat.no Description Thickness Width mm mm 1140 1140 1140 1140 1140 1140 1140 1140 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 12180 8050 7030 5200 8050 8050 12180 12180 24 24 24 24 24 24 24 24 2.25 3.40 3.85 4.50 3.40 3.40 2.25 2.25 0.044 0.044 0.044 0.044 0.044 0.044 0.044 0.044 13.89 9.18 8.01 5.93 9.18 9.18 13.89 13.89
EARTHWOOL LOFT ROLL 44 COMBI-CUT 100 EARTHWOOL LOFT ROLL 44 COMBI-CUT 150 EARTHWOOL LOFT ROLL 44 COMBI-CUT 170 EARTHWOOL LOFT ROLL 44 COMBI-CUT 200 EARTHWOOL LOFT ROLL 44 READY CUT (2x570) 150 EARTHWOOL LOFT ROLL 44 READY CUT (3x380) 150 EARTHWOOL LOFT ROLL 44 READY CUT (2x570) 100 EARTHWOOL LOFT ROLL 44 READY CUT (3x380) 100
The advantages of Earthwool Loft Roll 44 are: Lightweight and economic insulation quilt P roduced for use with timber joists at 400mm and 600mm centres Partially cut perforations Combines thermal, acoustic and re performance Made using recycled glass bottles and with ECOSE technology
22
www.buildcenter.co.uk
ROOFS
ApplicaTiOn:
LOFTS RAFTEr FlAT
MaTerial:
GLASS MINERAL WOOL
Earthwool Loft Roll270mm: Earthwool Loft Roll 270mm is an ultra thick product intended to be used as a single layer loft solution eliminating the requirement for cross-layering to achieve a U-value of 0.16 W/m2K. The product is easier to install than a traditional 2 layer 270mm solution (i.e. 100mm + 170mm) and the position of the ceiling joists can still be identied after the installation is complete. Loft Roll 270mm is an ultra thick product intended to be used as a single layer loft solution eliminating the requirement for cross-layering to achieve a U-value of 0.16W/m2K. Loft Roll 270mm is odourless, rot proof, non-hygroscopic, does not sustain vermin and will not encourage the growth of fungi, mould or bacteria.
Cat.no Description Thickness Width mm mm 270 270 1140 1140 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 3850 3850 24 24 6.10 6.10 0.044 0.044 4.62 4.62
N39730 N39729
The advantages of Earthwool Loft Roll 270 are: Lightweight and economic insulation quilt Produced for use with timber joists at 400mm and 600mm centres Partially cut perforations Combines thermal, acoustic and re performance Acheives Building Regulation compliance in one layer Made using recycled glass bottles and with ECOSE technology
23
ROOFS
ApplicaTiOn:
MaTerial:
GLASS MINERAL WOOL
Earthwool Rafter Roll 32: Rafter Roll 32 is a semi-rigid roll of glass mineral wool with extra high thermal performance, designed for friction tting between rafters. Rafter Roll 32 is designed for insulating between the rafters of pitched roofs in new build and existing buildings. It is easy to cut and friction t between rafters.
Cat.no Description Thickness Width mm mm 100 85 75 65 50 1200 1200 1200 1200 1200 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 4000 4600 5250 6100 7900 24 24 24 24 24 3.10 2.65 2.30 2.00 1.55 0.032 0.032 0.032 0.032 0.032 4.80 5.52 6.30 7.32 9.48
EARTHWOOL RAFTER ROLL 32 EARTHWOOL RAFTER ROLL 32 EARTHWOOL RAFTER ROLL 32 EARTHWOOL RAFTER ROLL 32 EARTHWOOL RAFTER ROLL 32
The advantages of Earthwool Rafter Wool are: Very high thermal performance Combines thermal and acoustic performance Quick and easy installation Friction tting allows rafter spacing to be completely lled, thus eliminating air gap Longer roll lengths Made using recycled glass bottles and with ECOSE technology
24
www.buildcenter.co.uk
ROOFS
ApplicaTiOn:
LOFTS RAFTEr FlAT
MaTerial:
GLASS MINERAL WOOL
Earthwool Room-in-Roof Roll: Room-in-Roof Roll provides thermal and acoustic insulation combined with unbeatable Euroclass A1 re performance. The foil facing on Room-in-Roof Roll is wider than the insulation enabling it to be stapled to the rafters to create a vapour control layer (vcl).
Cat.no Description Thickness Width mm mm 100 100 160 200 1160 1160 1160 1160 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 3600 7250 4600 2700 24 24 24 24 3.10 2.70 4.30 5.40 0.032 0.037 0.037 0.037 4.18 8.41 5.34 3.13
EARTHWOOL ROOM-IN-ROOF ROLL 32 EARTHWOOL ROOM-IN-ROOF ROLL 37 EARTHWOOL ROOM-IN-ROOF ROLL 37 EARTHWOOL ROOM-IN-ROOF ROLL 37
The advantages of Earthwool Room-in-Roof Roll are: Very high thermal performance Combines thermal and acoustic performance Quick and easy installation Friction tting allows rafter spacing to be completely lled, thus eliminating air gap Made using recycled glass bottles and with ECOSE technology
25
ROOFS
ApplicaTiOn:
MaTerial:
ROCK MINERAL WOOL
Earthwool Flexible Slabs: Flexible Slab is a multi-purpose thermal and acoustic insulation slab specically designed for installation by friction tting. For general thermal and acoustic insulation. For use in applications such as internal partitions, and between timber and metal studs, rafters and oor joists.
Cat.no Description Thickness Width mm mm 50 60 90 100 140 600 600 600 600 600 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack Wmk 1200 1200 1200 1200 1200 12 12 12 12 12 1.35 1.60 2.40 2.70 4.00 0.037 0.037 0.037 0.037 0.035 7.20 5.76 3.60 3.60 2.16
EARTHWOOL FLEXIBLE SLAB EARTHWOOL FLEXIBLE SLAB EARTHWOOL FLEXIBLE SLAB EARTHWOOL FLEXIBLE SLAB EARTHWOOL FLEXIBLE SLAB
The advantages of Earthwool Flexible Slabs are: Can be used for a wide variety of jobs including partitions and separating walls Friction ts between rafters/joists etc Provides excellent thermal and acoustic performance Made with ECOSE technology
26
www.buildcenter.co.uk
ROOFS
ApplicaTiOn:
LOFTS RAFTEr FlAT
MaTerial:
ROCK MINERAL WOOL
Earthwool Universal Slabs: Universal Slabs are unfaced, rock mineral wool slabs, available in a range of densities from 33 to 200 kg/m3. The standard product is supplied unfaced, but slabs can also be manufactured with a factory applied foil or tissue facing and are also available with a water repellent additive. Universal Slabs are used for a wide range of thermal and acoustic insulation applications in buildings, building services and industry.
Cat.no Description Thickness Width mm mm 40 50 75 100 50 100 25 30 50 75 100 40 50 75 100 100 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 16 16 16 16 12 12 12 12 12 12 12 12 12 12 12 16 1.10 1.40 2.10 2.85 1.35 2.70 0.70 0.85 1.40 2.10 2.85 1.10 1.40 2.10 2.85 2.85 0.035 0.035 0.035 0.035 0.037 0.037 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035 5.04 4.32 2.88 2.16 7.20 3.60 14.40 11.52 7.20 4.32 3.60 8.64 6.48 4.32 2.88 2.16
N40291 N40292 N40293 N08911 H19690 H19655 H19678 N35474 H19692 H19693 N33529 N40294 N33531 N35447 N33530 H01952
EARTHWOOL UNIVERSAL SLAB RS100 EARTHWOOL UNIVERSAL SLAB RS100 EARTHWOOL UNIVERSAL SLAB RS100 EARTHWOOL UNIVERSAL SLAB RS100 EARTHWOOL UNIVERSAL SLAB RS33 EARTHWOOL UNIVERSAL SLAB RS33 EARTHWOOL UNIVERSAL SLAB RS45 EARTHWOOL UNIVERSAL SLAB RS45 EARTHWOOL UNIVERSAL SLAB RS45 EARTHWOOL UNIVERSAL SLAB RS45 EARTHWOOL UNIVERSAL SLAB RS45 EARTHWOOL UNIVERSAL SLAB RS60 EARTHWOOL UNIVERSAL SLAB RS60 EARTHWOOL UNIVERSAL SLAB RS60 EARTHWOOL UNIVERSAL SLAB RS60 EARTHWOOL UNIVERSAL SLAB RS60
The advantages of Earthwool Universal Slabs are: Wide range of densities Non-combustible Excellent thermal and acoustic properties Made with ECOSE technology
27
Knauf Insulations Earthwool Loft Roll may not look like any insulation youre used to, but thats because its earthy brown colour represents a level of sustainability unlike any other insulation. Its unmatched eco-friendly credentials are thanks to the incorporation of revolutionary ECOSE Technology, a new bio-based, formaldehyde-free binder technology creating the next generation of insulation products. The result of ve years of intensive research, it uses rapidly renewable materials instead of petro-based chemicals and gives products like Earthwool Loft Roll their distinctive natural brown colour. Once again, Knauf Insulation is way out in front when it comes to insulating... naturally.
For more information call 0844 800 0135 quoting ref: EA154410 or visit www.knaunsulation.co.uk/ecose.aspx
ROOFS
ApplicaTiOn:
GA4000
MaTerial:
PIR
Celotex GA4000 has long been at the heart of the Celotex product range, providing a range of thermal insulation solutions to the builder. GA4000 is a general purpose insulation board suitable for oor, wall and roof applications.
Cat.no Description Thickness Width mm mm 50 55 60 65 70 75 80 85 90 95 100 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 8 7 7 6 6 6 6 5 5 5 12 2.25 2.50 2.70 2.95 3.15 3.40 3.60 3.85 4.05 4.30 4.50 0.022 0.022 0.022 0.022 0.022 0.022 0.022 0.022 0.022 0.022 0.022 23.04 20.16 20.16 17.28 17.28 17.28 17.28 14.40 14.40 14.40 34.56
N67989 N67990 N67991 N67992 N67993 N67994 N67995 N68100 N67996 N68101 N67997
CELOTEX GA4050 CELOTEX GA4055 CELOTEX GA4060 CELOTEX GA4065 CELOTEX GA4070 CELOTEX GA4075 CELOTEX GA4080 CELOTEX GA4085 CELOTEX GA4090 CELOTEX GA4095 CELOTEX GA4100
The advantages of GA4000 are: Is suitable for use in a number of applications including roof, wall and oor systems Is easy to cut and shape Includes low emissivity foil facings giving improved thermal insulation with cavity air spaces Provides reliable long-term energy savings for buildings Improved thermal performance of 0.022W/mK helping achieve better U-values and thinner solutions Helps meet the requirements of Part L 2010
30
www.buildcenter.co.uk
ROOFS
ApplicaTiOn:
LOFTS RAFTEr FlAT
FR4000
MaTerial:
PIR
Celotex FR4000 is a premium performance PIR solution. Through ongoing product development and breakthrough design, FR4000 offers enhanced thermal performance compared to typical PIR as well as Class O re performance throughout the entire product. FR4000 is specically targeted at pitched roof, wall and oor applications.
Cat.no Description Thickness Width mm mm 25 50 60 70 70 75 80 90 100 110 120 130 140 150 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 16 8 7 6 6 6 6 5 12 11 10 9 8 8 1.10 2.25 2.70 3.15 3.15 3.40 3.60 4.05 4.50 5.00 5.45 5.90 6.35 6.80 0.022 0.022 0.022 0.022 0.022 0.022 0.022 0.022 0.022 0.022 0.022 0.022 0.022 0.022 46.08 23.04 20.16 17.28 17.28 17.28 17.28 14.40 34.56 31.68 28.80 25.92 23.04 23.04
N41689 N41694 N41695 N41696 N40773 N41697 N41698 N41699 N41700 N41701 N41702 N41703 N41704 N41705
CELOTEX FR4025 CELOTEX FR4050 CELOTEX FR4060 CELOTEX FR4070 CELOTEX FR4000 CELOTEX FR4075 CELOTEX FR4080 CELOTEX FR4090 CELOTEX FR4100 CELOTEX FR4110 CELOTEX FR4120 CELOTEX FR4130 CELOTEX FR4140 CELOTEX FR4150
The advantages of FR4000 are: Has a consistent thermal conductivity value of 0.022W/mK Has the best re performance of any PIR insulation board, with Class O performance throughout the entire product Comes in a standard board size of 1200mm x 2400mm Features low emissivity textured aluminium foil facings for improved thermal performance within cavity air-spaces
31
ROOFS
ApplicaTiOn:
PL4000
MaTerial:
PIR
Celotex PL4000 offers PIR insulation bonded to a layer of 12.5mm tapered edge plasterboard. PL4000 is suitable for direct bonding and mechanically xed dry lining applications in both new build and refurbishment projects.
Cat.no Description Thickness* Width mm mm 25 40 45 50 55 60 65 1200 1200 1200 1200 1200 1200 1200 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 2400 2400 2400 2400 2400 2400 2400 26 22 20 18 16 15 14 1.20 1.85 2.10 2.35 2.55 2.80 3.00 0.022 0.022 0.022 0.022 0.022 0.022 0.022 74.88 63.36 57.60 51.84 46.08 43.20 40.32
N68004 CELOTEX PL4025 N68005 CELOTEX PL4040 N68103 CELOTEX PL4045 N68104 CELOTEX PL4050 N68006 CELOTEX PL4055 N68105 CELOTEX PL4060 N68007 CELOTEX PL4065 *Thickness excludes 12.5mm plasterboard
ApplicaTiOn:
TB4000
MaTerial:
PIR
Celotex TB4000 is a thin foil-faced insulation board especially developed to provide simple solutions to overcome thermal bridging. It highlights our industry leading position as a manufacturer of thin boards enabling the maximisation of internal space. Celotex is unique in being able to offer boards as thin as 12mm to the market for this purpose. TB4000 can be used in oors, walls and roofs as well as a multi-purpose insulation board.
Cat.no Description Thickness Width mm mm 12 20 25 30 35 40 45 1200 1200 1200 1200 1200 1200 1200 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 2400 2400 2400 2400 2400 2400 2400 28 20 16 14 12 10 9 0.50 0.90 1.10 1.35 1.55 1.80 2.00 0.022 0.022 0.022 0.022 0.022 0.022 0.022 80.64 57.60 46.08 40.32 34.56 28.80 25.92
CELOTEX TB4012 CELOTEX TB4020 CELOTEX TB4025 CELOTEX TB4030 CELOTEX TB4035 CELOTEX TB4040 CELOTEX TB4045
www.buildcenter.co.uk
ROOFS
ApplicaTiOn:
LOFTS RAFTEr FlAT
TD4000
MaTerial:
PIR
Celotex TD4000 provides a quick and easy way to achieve effective thermally insulated roof decks for building structures such as small extensions or garage roofs where there will be only occasional trafcking. TD4000 allows the user to install the roof structure in one operation since the product provides the deck, insulation and vapour control layer thereby considerably reducing installation times ahead of weatherproong.
Cat.no Description Thickness* Width mm mm 90 100 110 120 1200 1200 1200 1200 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 2400 2400 2400 2400 12 11 10 9 4.10 4.55 5.00 5.45 0.022 0.022 0.022 0.022 34.56 31.68 28.80 25.92
N68008 CELOTEX TD4000 N68009 CELOTEX TD4100 N68010 CELOTEX TD4110 N68011 CELOTEX TD4120 *Thickness excludes 5.5mm WBP Plywood
ApplicaTiOn:
LOFTS RAFTEr FlAT
XR4000
MaTerial:
PIR
Celotex XR4000 enables users to achieve lower U-values with a single layer of insulation than has previously been possible. This will help designers meet present and future legislation including the Building Regulations, BREEAM and the Code for Sustainable Homes. XR4000 is appropriate for use in oor, wall and roof applications.
Cat.no Description Thickness Width mm mm 110 120 130 140 150 165 200 1200 1200 1200 1200 1200 1200 1200 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 2400 2400 2400 2400 2400 2400 2400 11 10 9 8 8 7 6 5.00 5.45 5.90 6.35 6.80 7.50 9.05 0.022 0.022 0.022 0.022 0.022 0.022 0.022 31.68 28.80 25.92 23.04 23.04 20.16 17.28
33
CELOTEX XR4110 CELOTEX XR4120 CELOTEX XR4130 CELOTEX XR4140 CELOTEX XR4150 CELOTEX XR4165 CELOTEX XR4200
ROOFS
ApplicaTiOn:
TA4000
MaTerial:
PIR
TA4000 is a purpose-designed insulation board for use with mechanically xed and ballasted single-ply weathering systems. It provides a quick and easy way to achieve effective thermal insulation in at roof structures.
Cat.no Description Thickness Width mm mm 85 90 100 115 125 135 1200 1200 1200 1200 1200 1200 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 2400 2400 2400 2400 2400 2400 14 13 12 9 9 9 3.85 4.05 4.50 5.20 5.65 6.10 0.022 0.022 0.022 0.022 0.022 0.022 40.32 37.44 34.56 28.80 25.92 25.92
CELOTEX TA4085 CELOTEX TA4090 CELOTEX TA4100 CELOTEX TA4115 CELOTEX TA4125 CELOTEX TA4135
The advantages of TA4000 are: Is designed for use in single-ply membrane applications where the board can be secured to the deck via mechanical xings, or thermally broken xings or with ballast Achieves U-values with minimum thickness Is strong and durable Is rot proof Is dimensionally stable and unaffected by temperature cycles Is easy to cut Requires minimum number of xings Is ideal for fast construction schedules
34
www.buildcenter.co.uk
ROOFS
ApplicaTiOn:
LOFTS RAFTEr FlAT
TC3000
MaTerial:
PIR
Celotex TC3000 provides a quick and easy method of achieving effective thermal insulation in built-up at roong applications including hot-applied bituminous, mastic asphalting and torch-on systems
Cat.no Description Thickness Width mm mm 50 100 120 130 140 150 1200 1200 1200 1200 1200 1200 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 600 600 600 600 600 600 10 5 4 3 3 3 1.85 3.80 4.80 5.20 5.60 6.00 0.027 0.026 0.025 0.025 0.025 0.025 7.20 3.60 2.88 2.16 2.16 2.16
CELOTEX TC3050 CELOTEX TC3100 CELOTEX TC3120 CELOTEX TC3130 CELOTEX TC3140 CELOTEX TC3150
ApplicaTiOn:
LOFTS RAFTEr FlAT
EL3000
MaTerial:
PIR
Celotex EL3000 is a purpose-designed insulation board for use in built-up at roong applications including hot-applied bituminous and mastic asphalt waterproong systems and fully adhered single-ply membranes. EL3000 features a coated glass tissue facer, perforated on one side for use in bitumen-based built-up applications, whilst the reverse facer is suitable for single-ply membrane applications.
Cat.no Description Thickness Width mm mm 50 100 120 130 140 150 1200 1200 1200 1200 1200 1200 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 600 600 600 600 600 600 10 5 4 3 3 3 1.85 3.80 4.80 5.20 5.60 6.00 0.027 0.026 0.025 0.025 0.025 0.025 7.20 3.60 2.88 2.16 2.16 2.16
35
CELOTEX EL3050 CELOTEX EL3100 CELOTEX EL3120 CELOTEX EL3130 CELOTEX EL3140 CELOTEX EL3150
Innovation in insulation
25
How two little ducks can help you reach the new Building Regulation emissions target.
At Celotex we are leading the way through innovation and design in insulation with our new products. Our super low lambda of 0.022 W/mK makes Celotex products more thermally efficient than other typical PIR products and up to 100% more efficient than many mineral fibre products. Offering better U-values and thinner solutions, Celotex products will help you easily hit the insulation standards required by the new Building Regulations. With the target to achieve a 25% reduction in CO2 emissions Celotex can offer new and innovative solutions to help you meet these demands.
Building Regulations
Part L
Reducing CO2 Emissions October 2010
For illustration purposes only.
ROOFS
ApplicaTiOn:
LOFTS RAFTEr FlAT
MaTerial:
SHEEPS WOOL
Manufactured in Wales from UK sheeps wool, Black Mountain has the same high quality specication as our other natural insulations - low embodied energy, hygroscopic and good thermal acoustic performance. Complies with all building and re regulations.
Cat.no Description Thickness Width mm mm 150 100 150 100 100 100 400 600 600 400 600 600 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 1200 1200 1200 5000 5000 10000 6 10 6 1 1 1 0.4 0.4 0.4 0.4 0.4 0.4 0.04 0.04 0.04 0.04 0.04 0.04 2.88 7.20 4.32 2.00 3.00 6.00
BLACK MOUNTAIN BATT BLACK MOUNTAIN BATT BLACK MOUNTAIN BATT BLACK MOUNTAIN ROLL BLACK MOUNTAIN ROLL BLACK MOUNTAIN ROLL
ApplicaTiOn:
LOFTS RAFTEr FlAT
TRISO SUPER 10
MaTerial:
MUlTiFOilS
Triso Super 10 is a thin thermo-reective insulation which is a stand alone insulation product, is effective both in summer and winter and is exible, quick and easy to install.
Cat.no Description Thickness Width mm mm 30 30 1600 1600 100 M2 Length Qty R-Value Thermal mm per pack Conductivity per pack W/mk 12500 6250 25000 20 10
37
ROOFS
ApplicaTiOn:
TLX SILVER
MaTerial:
MUlTiFOilS
TLX Silver is a thin, exible reective insulation used with other insulation material to achieve the desired U Value requirement.
Cat.no Description Thickness Width mm mm Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 10000 1 1.69 12
N00141
30
1200
ApplicaTiOn:
TP10
MaTerial:
PUR
A rigid urethane insulation. For use at rafter level in tiled or slate pitched warm roofs.
Cat.no Description Thickness Width mm mm 25 40 50 60 70 75 90 100 120 1200 1200 1200 1200 1200 1200 1200 1200 1200 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 2400 2400 2400 2400 2400 2400 2400 2400 2400 12 8 6 5 4 4 3 3 3 0.022 0.022 0.022 0.022 0.022 0.022 0.022 0.022 0.022 34.56 23.04 17.28 14.40 11.52 11.52 8.64 8.64 8.64
KINGSPAN THERMAPITCH TP10 KINGSPAN THERMAPITCH TP10 KINGSPAN THERMAPITCH TP10 KINGSPAN THERMAPITCH TP10 KINGSPAN THERMAPITCH TP10 KINGSPAN THERMAPITCH TP10 KINGSPAN THERMAPITCH TP10 KINGSPAN THERMAPITCH TP10 KINGSPAN THERMAWALL TP10
38
www.buildcenter.co.uk
ROOFS
ApplicaTiOn:
LOFTS RAFTEr FlAT
K7
MaTerial:
PhEnOlic
A foil-faced rigid phenolic insulation for use at rafter level in tiled or pitched warm roofs.
Cat.no Description Thickness Width mm mm 40 50 60 70 100 1200 1200 1200 1200 1200 Length Qty R-Value Thermal M2 mm per pack Conductivity per pack W/mk 2400 2400 2400 2400 2400 8 6 5 4 3 0.02 0.02 0.02 0.02 0.02 23.04 17.28 14.40 11.52 8.64
KOOLTHERM K7 P-ROOF BOARD KOOLTHERM K7 P-ROOF BOARD KOOLTHERM K7 P-ROOF BOARD KOOLTHERM K7 P-ROOF BOARD KOOLTHERM K7 P-ROOF BOARD
Dont forget...
We also sell all the tools, PPE and ancillary products you need to complete the job.
Turn to page 91 for our basic range or ask in branch for details
000
ge 1
9 529