Wavecor SW263WA01-03
Wavecor SW263WA01-03
Wavecor SW263WA01-03
FEATURES
Extremely rigid aluminium cone to ensure piston motion at high levels and for better heat transfer at high continuous power levels Die cast alu chassis with additional spacers for optimal ventilation and increased stroke Vented cone neck for reduced distortion and compression Vented chassis for lower air flow speed reducing audible distortion Heavy-duty black fiber glass voice coil bobbin to reduce mechanical losses resulting in better dynamic performance and low-level details Large motor system with 2 voice coil diameter and huge 145mm magnet for better control and efficiency Black-anodized magnet structure steel parts for increased heat dissipation and power handling Two built-in alu stabilizing rings for reduced high-level distortion by reducing variations in the magnetic field and reducing voice coil inductance variations Long linear stroke motor for reduced distortion at high levels Linear suspension with specially designed CONEX damper (spider) for long durability under extreme operating conditions
Parameter
Nominal size Nominal impedance Recommended upper frequency limit Sensitivity, 2.83V/1m, (average 100-300Hz) Voice coil diameter Voice coil height Air gap height Voice coil resistance, RDC Voice coil inductance Magnet weight (dual ferrite) Effective radiating area, Sd Power handling, continuous, IEC 268-5 Resonance freq., Fs Moving mass, incl. air Force factor, Bxl Mechanical Q, Qm Electrical Q, Qe Total Q, Qt Suspension compliance, Cms Equiv. air volume, Vas Total unit net weight
Ohm
500
Ohm
500
200 100 50
200 100 50
20 10 5
20 10 5
1 10
20
50
100
200
500
1K
2K
5K
10K
Hz
20K
1 10
20
50
100
200
500
1K
2K
5K
10K
Hz
20K
Specifications are subject to change without any further notice. Copyright 2006-2008 by Wavecor Ltd., Guangzhou, China. All rights reserved. Wavecor is a registered trademark of Wavecor Ltd. For more information please visit www.Wavecor.com
Page 1
SPECIFICATIONS
SW263WA01 / SW263WA03, 10 die cast, alu-cone subwoofers, 8/4 ohm
OUTLINE DRAWING (dimensions in mm)
263 max. 25 (voice coil in rest position) max. 131
9.5
8x 5.5
247
PACKAGING INFORMATION
SW263WA01-01 SW263WA03-01 8 ohm, one piece per carton 4 ohm, one piece per carton
Specifications are subject to change without any further notice. Copyright 2006-2008 by Wavecor Ltd., Guangzhou, China. All rights reserved. Wavecor is a registered trademark of Wavecor Ltd. For more information please visit www.Wavecor.com
Page