USER'S MANUAL

Serial Number
Decal (under frame)
www.nordictrack.com
CAUTION
Read aII precautions and instruc-
tions in this manuaI before using
this equipment. Keep this manuaI
for future reference.
ModeI No. NTEL06011.2
SeriaI No.
Write the serial number in the space
above for reference.
QUESTIONS?
If you have questions, or if parts
are damaged or missing, DO NOT
CONTACT THE STORE; pIease
contact Customer Care.
IMPORTANT: PIease register this
product (see the Iimited warranty
on the back cover of this manuaI)
before contacting Customer Care.
CALL TOLL-FREE:
1-800-TO-BE-FIT
(1-800- 862-3348)
Mon.-Fri., 6 a.m.-6 p.m. MT
Sat. 8 a.m.-4 p.m. MT
ON THE WEB:
www.nordictrackservice.com
2
NORDICTRACK is a registered trademark of ICON IP, Inc.
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the warning
decal(s). If a decaI is missing or iIIegibIe, see the
front cover of this manuaI and request a free
repIacement decaI. AppIy the decaI in the Ioca-
tion shown. Note: The decal(s) may not be shown
at actual size.
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
HOW TO USE THE ELLIPTICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
FCC INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
3
WARNING: To reduce the risk of serious injury, read aII important precautions and
instructions in this manuaI and aII warnings on your eIIipticaI before using your eIIipticaI. ICON
assumes no responsibiIity for personaI injury or property damage sustained by or through the use of
this product.
1. Before beginning any exercise program,
consuIt your physician. This is especiaIIy
important for persons over age 35 or per-
sons with pre-existing heaIth probIems.
2. Use the eIIipticaI onIy as described in this
manuaI.
3. It is the responsibiIity of the owner to ensure
that aII users of the eIIipticaI are adequateIy
informed of aII precautions.
4. The eIIipticaI is intended for home use onIy.
Do not use the eIIipticaI in a commerciaI,
rentaI, or institutionaI setting.
5. Keep the eIIipticaI indoors, away from mois-
ture and dust. Do not put the eIIipticaI in a
garage or covered patio, or near water.
6. PIace the eIIipticaI on a IeveI surface, with at
Ieast 3 ft. (0.9 m) of cIearance in the front and
rear of the eIIipticaI and 2 ft. (0.6 m) on each
side. To protect the fIoor or carpet from dam-
age, pIace a mat under the eIIipticaI.
7. Inspect and properIy tighten aII parts regu-
IarIy. RepIace any worn parts immediateIy.
8. Keep chiIdren under age 12 and pets away
from the eIIipticaI at aII times.
9. The eIIipticaI shouId not be used by persons
weighing more than 300 Ibs. (136 kg).
10. Wear appropriate cIothes whiIe exercising;
do not wear Ioose cIothes that couId become
caught on the eIIipticaI. AIways wear athIetic
shoes for foot protection whiIe exercising.
11. HoId the handIebars or the upper body arms
when mounting, dismounting, or using the
eIIipticaI.
12. The heart rate monitor is not a medicaI
device. Various factors may affect the accu-
racy of heart rate readings. The heart rate
monitor is intended onIy as an exercise aid
in determining heart rate trends in generaI.
13. The eIIipticaI does not have a freewheeI; the
pedaIs wiII continue to move untiI the fIy-
wheeI stops. Reduce your pedaIing speed in
a controIIed way.
14. Keep your back straight whiIe using the eIIip-
ticaI; do not arch your back.
15. Over exercising may resuIt in serious injury
or death. If you feeI faint or if you experience
pain whiIe exercising, stop immediateIy and
cooI down.
IMPORTANT PRECAUTIONS
4
BEFORE YOU BEGIN
Thank you for selecting the revolutionary
NORDICTRACK

E 5.5 elliptical. The E 5.5 elliptical

provides an impressive selection of features designed
to make your workouts at home more effective and
enjoyable.
For your benefit, read this manuaI carefuIIy before
you use the eIIipticaI. If you have questions after
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Handlebar
Upper Body Arm
Console
Wheel
Adjustment Knob
Pedal
Storage Latch
Accessory Tray
Heart Rate Monitor
Handle
Leveling Foot
Disc
Length: 6 ft. 4 in. (193 cm)
Width: 2 ft. 2 in. (66 cm)
5
M8 Locknut
(105)-6
Wave Washer
(118)-2
M10 Split
Washer (128)-4
M8 x 23mm
x 1.5mm Washer
(126)-10
M6 x 12mm
Screw (111)-2
M8 x 45mm Button Bolt (104)-6
M4 x 16mm
Screw (93)-16
M8 Split Washer
(131)-6
M4 x 25mm
Screw (132)-2
M8 x 16mm
Screw (102)-18
M8 x 50mm
Button Screw (123)-6
M10 x 120mm Screw (100)-4
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembIed. Extra parts may be incIuded.
6
Assembly requires two persons.
Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
To identify small parts, see page 5.
In addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
one rubber mallet
Assembly may be easier if you have your own set
of wrenches. To avoid damaging parts, do not use
power tools.
ASSEMBLY
2. Identify and orient the Front Stabilizer (3) as
shown.
While a second person lifts the Frame (1), attach
the Front Stabilizer (3) to the Frame with two
M10 x 120mm Screws (100) and two M10 Split
Washers (128).
1
3
1
100
128
1. Pull the Folding Frame (2) back until it locks
into position. Then, see HOW TO FOLD AND
UNFOLD THE ELLIPTICAL on page 15 and
unfold the elliptical.
Tip: It may be easier to perform this step with
the eIIipticaI in the foIded position.
Identify and orient the Rear Stabilizer (4) as
shown.
While a second person lifts the Folding Frame
(2), attach the Rear Stabilizer (4) to the Folding
Frame with two M10 x 120mm Screws (100) and
two M10 Split Washers (128).
2
2
4
128
100
7
3. Orient the Small Bumper (13) so that the
recessed holes are in the indicated location.
While a second person lifts the Frame (1), attach
the Small Bumper (13) to the underside of the
Frame with two M4 x 25mm Screws (132).
4. Identify and orient the Upright (5) and the Top
Cover (23) as shown. Slide the Top Cover
upward onto the Upright.
Have a second person hold the Upright (5) and
the Top Cover (23) near the Frame (1).
Connect the Upright Wire (60) to the Frame Wire
(109).
Tip: To prevent the Upright Wire (60) from
faIIing into the Upright (5), secure the top of
the Upright Wire with a rubber band or tape.
3
4
13
1
5
1
109
60
23
132
Recessed
Holes
8
6
5
Avoid pinching
the wires
5. Tip: Avoid pinching the wires. Insert the
Upright (5) into the Frame (1).
Attach the Upright (5) with six M8 x 16mm
Screws (102) and six M8 Split Washers (131).
Do not tighten the Screws yet.
Slide the Top Cover (23) downward. Do not
press the Top Cover into the Right and Left
Frame Covers (21, 22) yet.
5
1
23
21, 22
102
131
102
131
102
6. Identify the Right Upper Body Arm (8) and the
Right Upper Body Leg (6), which are marked
with "R" stickers, and orient them as shown.
Insert the Right Upper Body Arm (8) into the
Right Upper Body Leg (6).
Attach the Right Upper Body Arm (8) with three
M8 x 45mm Button Bolts (104) and three M8
Locknuts (105). Make sure that the Locknuts
are inside the hexagonaI hoIes. Do not fuIIy
tighten the Button BoIts yet.
AssembIe the Left Upper Body Arm (9) and
the Left Upper Body Leg (7) in the same way.
Hexagonal
Holes
9
7
6
8
104
104
105
105
9
7. Using a small plastic bag to keep your fingers
clean, apply a generous amount of the included
grease to the Upright Axle (48) and to two Wave
Washers (118).
Insert the Upright Axle (48) into the Upright (5)
and center it. Slide a Wave Washer (118) onto
each end of the Upright Axle.
Slide the Right and Left Upper Body Arms (8, 9)
onto the Upright Axle (48).
8. At the same time, tighten an M8 x 16mm Screw
(102) and an M8 x 23mm x 1.5mm Washer (126)
into each end of the Upright Axle (48). FirmIy
tighten the Screws.
7
8
9
5
48
118
118
Grease
8
126
126
102
102
48
10
9
10
11
9. Attach the Rear Upright Cover (24) to the Upright
(5) with four M4 x 16mm Screws (93).
24
24
102
126
115
126
12
51
25
93
5
5
10. Attach the Front Upright Cover (25) around the
Upright (5) by pressing the tabs on the Front
Upright Cover into the Rear Upright Cover (24).
11. Identify the Short Pedal Arm Axles (115) and the
Long Pedal Axles (not shown).
Apply a small amount of grease to a Short Pedal
Arm Axle (115) and to an M8 x 23mm x 1.5mm
Washer (126).
Next, tighten an M8 x 16mm Screw (102) and an
M8 x 23mm x 1.5mm Washer (126) a few turns
into one end of the Short Pedal Arm Axle (115).
Orient a Pedal Arm (12) as shown. While a sec-
ond person holds the front end of the Right Pivot
Arm (51) inside the bracket on the Pedal Arm,
insert the Short Pedal Arm Axle (115) through
both parts.
Tighten another M8 x 16mm Screw (102) and
an M8 x 23mm x 1.5mm Washer (126) a few
turns into the Short Pedal Arm Axle (115). Then,
tighten both Screws at the same time.
Repeat this step on the other side of the
eIIipticaI.
Grease
102
11
12
13
12. Identify the Right Pedal (14), which is marked
with a "Right" sticker, and orient it as shown.
Attach the Right Pedal (14) to the right Pedal
Arm (12) with three M8 x 50mm Button Screws
(123).
Attach the Left PedaI (not shown) to the Ieft
PedaI Arm (12) in the same way.
14
6
106
102
126
126
123
12
12
13. Apply a small amount of grease to a Long Pedal
Arm Axle (106) and to an M8 x 23mm x 1.5mm
Washer (126).
Next, tighten an M8 x 16mm Screw (102) and an
M8 x 23mm x 1.5mm Washer (126) a few turns
into one end of the Long Pedal Arm Axle (106).
While a second person holds the front end of the
right Pedal Arm (12) inside the bracket on the
Right Upper Body Leg (6), insert the Long Pedal
Arm Axle (106) through both parts.
Tighten another M8 x 16mm Screw (102) and
an M8 x 23mm x 1.5mm Washer (126) a few
turns into the Long Pedal Arm Axle (106). Then,
tighten both Screws at the same time.
Repeat this step on the other side of the
eIIipticaI.
Grease
102
12
14
14. Identify the Right Inner and Outer Leg Covers
(27, 28), which are marked with "Right" stickers,
and orient them as shown.
Press the Right Inner and Outer Leg Covers (27,
28) together around the Right Upper Body Leg
(6).
Attach the Right Inner and Outer Leg Covers
(27, 28) to the Right Upper Body Leg (6) with an
M4 x 16mm Screw (93). To avoid damaging the
pIastic, do not overtighten the Screw.
Attach the Left Inner and Outer Leg Covers
(49, 50) in the same way.
93
49
50
27
28
6
12
15
15. Remove and discard the cap (not shown) on the
right Adjustment Pin (44).
Attach an Adjustment Knob (45) to the right
Adjustment Pin (44) with an M6 x 12mm Screw
(111).
Then, press the tabs on a Knob Cap (46) into the
Adjustment Knob (45).
Repeat this step on the other side of the
eIIipticaI.
46
45
44
111
16. See step 6. Tighten the six M8 x 45mm Button
Bolts (104).
See step 5. Tighten the six M8 x 16mm Screws
(102). Tip: Tighten the two Screws on the
front of the eIIipticaI before tightening the
other four Screws.
Identify the Right Rear and Front Leg Covers
(29, 30), which are marked with "Right" stickers.
Attach the Right Front Leg Cover (30) to the
Right Upper Body Arm (8) with two M4 x 16mm
Screws (93).
Attach the Right Rear Leg Cover (29) around the
Right Upper Body Arm (8) by pressing the tabs
on the Right Rear Leg Cover into the Right Front
Leg Cover (30).
Attach the Left Rear and Front Leg Covers
(31, 32) in the same way.
Then, slide the Top Cover (23) downward and
press it into the Right and Left Frame Covers
(21, 22).
16
93
8
30
31
29
23
32
21, 22
13
17
18
19
17. Orient the Console Cover (11) as shown. While a
second person holds the Console Cover near the
Upright (5), insert the Upright Wire (60) upward
through the Console Cover.
Then, slide the Console Cover (11) onto the
Upright (5).
11
5
5
60
10
10
5
135
135
18. Orient the Handlebar (10) as shown. Have a
second person hold the Handlebar near the
Upright (5).
Locate the Pulse Wires (135) in the Handlebar
(10). Insert the Pulse Wires into the hole in the
front of the Upright (5). Then, pull the Pulse
Wires upward out of the top of the Upright.
19. Insert the Upright Wire (60) and the Pulse Wires
(135) upward through the Handlebar (10).
Tip: Avoid pinching the wires. Attach the
Handlebar (10) to the Upright (5) with two M8 x
16mm Screws (102).
102
Avoid pinching
the wires
60
14
20
21
22
20. While a second person holds the Console (33)
near the Handlebar (10), connect the console
wires to the Upright Wire (60) and to the Pulse
Wires (135).
Insert the excess wire into the Console (33) or
into the Handlebar (10).
Tip: Avoid pinching the wires. Attach the
Console (33) to the Handlebar (10) with four M4
x 16mm Screws (93).
21. Attach the Console Cover (11) to the Console
(33) with two M4 x 16mm Screws (93).
22. Plug the Power Adapter (136) into the receptacle
on the frame of the elliptical.
To plug the Power Adapter (136) into an outlet,
see HOW TO PLUG IN THE POWER ADAPTER
on page 15.
23. Make sure that aII parts of the eIIipticaI are properIy tightened. Note: Some hardware may be left over
after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical.
135
136
33
60
10
93
93
11
Avoid pinching
the wires
33
15
HOW TO USE THE ELLIPTICAL
HOW TO PLUG IN THE POWER ADAPTER
IMPORTANT: If the eIIipticaI has been exposed to
coId temperatures, aIIow it to warm to room tem-
perature before you pIug in the power adapter. If
you do not do this, you may damage the consoIe
dispIays or other eIectronic components.
Plug the power adapter
into the receptacle on
the frame of the ellipti-
cal. Then, plug the
power adapter into an
appropriate outlet that
is properly installed
in accordance with
all local codes and
ordinances.
HOW TO FOLD AND UNFOLD THE ELLIPTICAL
When the elliptical is not in use, the frame can be
folded out of the way. Hold the handle and gently lift
the frame until the pivot arms fold and the frame locks
in a folded position.
To use the elliptical, first hold the handle, pull back on
the frame, press the latch button, and lower the frame.
HOW TO MOVE THE ELLIPTICAL
To move the elliptical, first fold it as described at
the left. Next, stand in front of the elliptical, hold the
upright, and place one foot against one of the wheels.
Pull the upright until the elliptical rolls on the wheels.
With the help of a second person, carefully move the
elliptical to the desired position, and then lower it to the
floor.
Handle
Latch Button
Pivot Arm
Place
your
foot
here
Pull on the
upright
Power Adapter
16
HOW TO ADJUST THE STRIDE LENGTH
To adjust the stride length of the elliptical, first loosen
an adjustment knob. Next, pull the adjustment knob
outward until the adjustment bracket will move freely.
Slide the adjustment bracket upward or downward until
the adjustment knob is aligned with one of the holes in
the crank arm, and gently release the knob to engage
the adjustment pin in the hole.
Rock the adjustment arm upward and downward
slightly to make sure that the adjustment pin is
engaged in one of the holes in the crank arm. Then,
tighten the adjustment knob.
Adjust the stride length on the other side of the ellipti-
cal in the same way. Make sure that both sides of
the eIIipticaI are adjusted to the same stride Iength.
HOW TO LEVEL THE ELLIPTICAL
If the elliptical
rocks slightly on
your floor dur-
ing use, turn
one or both of
the leveling feet
beneath the rear
stabilizer until the
rocking motion is
eliminated.
If the frame of the
elliptical flexes
during use, turn one or both of the leveling feet under
the center of the frame until the flexing is eliminated.
HOW TO EXERCISE ON THE ELLIPTICAL
To mount the elliptical, hold the upper body arms or the
handlebars and step onto the pedal that is in the lowest
position. Next, step onto the other pedal. Push the ped-
als until they begin to move with a continuous motion.
Note: The crank arms can turn in either direction.
It is recommended that you turn the crank arms
in the direction shown by the arrow; however, for
variety, you can turn the crank arms in the opposite
direction.
To dismount the elliptical, wait until the pedals come to
a complete stop. Note: The eIIipticaI does not have
a free wheeI; the pedaIs wiII continue to move untiI
the fIywheeI stops. When the pedals are stationary,
step off the highest pedal first. Then, step off the lowest
pedal.
Pedals
Crank Arm
Handlebars
Upper Body Arms
Leveling Feet
Leveling
Foot
Adjustment
Knob
Adjustment
Pin
Adjustment
Bracket
Crank Arm
17
CONSOLE DIAGRAM FEATURES OF THE CONSOLE
The advanced console offers an array of features
designed to make your workouts more effective and
enjoyable.
When you use the manual mode of the console, you
can change the resistance of the pedals with the touch
of a button. While you exercise, the console will display
continuous exercise feedback. You can also measure
your heart rate using the handgrip heart rate monitor.
The console offers twenty onboard workouts-ten
calorie workouts and ten performance workouts. Each
workout automatically changes the resistance of the
pedals as it guides you through an effective workout.
The console also features an iFit Live mode that
enables the console to communicate with your wireless
network through an optional iFit Live module. With the
iFit Live mode, you can download personalized work-
outs, create your own workouts, track your workout
results, race against other runners, and access many
other features. To purchase an iFit Live moduIe at
any time, go to www.iFit.com or caII the teIephone
number on the front cover of this manuaI.
You can even connect your MP3 player or CD player
to the console sound system and listen to your favorite
music or audio books while you exercise.
To use the manuaI mode, see page 18. To use
an onboard workout, see page 20. To use an iFit
Live workout, see page 21. To use the sound sys-
tem, see page 22. To change consoIe settings,
see page 22.
Note: If there is a sheet of plastic on the display,
remove the plastic.
18
HOW TO USE THE MANUAL MODE
1. Begin pedaIing or press any button on the
consoIe to turn on the consoIe.
When you turn on the console, the display will turn
on. The console will then be ready for use.
2. SeIect the manuaI mode.
Press the Manual Control button on the console to
select the manual mode.
If a wireless iFit Live module is not inserted into
the console and connected to iFit Live, the manual
mode will be selected automatically.
3. Change the resistance of the pedaIs as desired.
As you pedal, change the resistance of the pedals
by pressing the Resistance increase and decrease
buttons.
Note: After you press a button, it will take a
moment for the pedals to reach the selected resis-
tance level.
4. FoIIow your progress with the dispIay.
The display can show the following workout
information:
CaIories (CaIs.)-This display mode will show the
approximate number of calories you have burned.
CaIories per Hour (CaIs./Hr)-This display mode
will show the approximate number of calories you
are burning per hour.
Distance (Dist.)-This display mode will show
the distance that you have pedaled in miles or
kilometers.
PuIse-This display mode will show your heart rate
when you use the handgrip heart rate monitor (see
step 5 on page 19).
Resistance (Resist.)-This display mode will
show the resistance level of the pedals for a few
seconds each time the resistance level changes.
RPM-This display mode will show your pedaling
speed in revolutions per minute (rpm).
Stride-This display mode will show the total num-
ber of strides you have pedaled.
Time-When the manual mode is selected, this
display mode will show the elapsed time. When an
onboard workout is selected, this display mode will
show the time remaining in the workout.
The matrix offers several display tabs. Press the
Display button until the desired tab is shown. You
can also press the increase and decrease buttons
next to the Enter button.
Speed-This tab will show a profile of the speed
settings of the workout. A new segment will appear
at the end of each minute.
My TraiI-This tab will show a track that represents
1/4 mile (400 m). As you exercise, the flashing
rectangle will show your progress. The My Trail tab
will also show the number of laps you complete.
CaIorie-This tab will show the approximate
amount of calories you have burned. The height of
each segment represents the amount of calories
burned during that segment.
As you exercise, the workout intensity level bar
will indicate the approximate intensity level of your
exercise.
19
Press the Home button to return to the default
menu (see HOW TO CHANGE CONSOLE
SETTINGS on page 22 to set the default menu).
If necessary, press the Home button again.
When a wireless iFit Live
module is connected, the wire-
less symbol at the top of the
display will show the strength
of your wireless signal.
Four arcs indicate full signal
strength.
To exit the manual mode or a workout, press the
Home button. If necessary, press the Home button
again.
Change the volume level
of the console by pressing
the Volume increase and
decrease buttons.
5. Measure your heart rate if desired.
If there are
sheets of pIastic
on the metaI
contacts on the
handgrip heart
rate monitor,
remove the
pIastic. To mea-
sure your heart
rate, hold the
handgrip heart
rate monitor with your palms resting against the
contacts. Avoid moving your hands or gripping
the contacts tightIy.
When your pulse is detected, a heart symbol in the
calorie display will flash each time your heart beats,
one or two dashes will appear, and then your heart
rate will be shown. For the most accurate heart rate
reading, hold the contacts for at least 15 seconds.
If the display does not show your heart rate, make
sure that your hands are positioned as described.
Be careful not to move your hands excessively or
to squeeze the contacts tightly. For optimal perfor-
mance, clean the contacts using a soft cloth; never
use aIcohoI, abrasives, or chemicaIs to cIean
the contacts.
6. When you are finished exercising, the consoIe
wiII turn off automaticaIIy.
If the pedals do not move for several seconds, a
tone will sound, the console will pause, and the
time will flash in the display. To resume your work-
out, simply resume pedaling.
If the pedals do not move for several minutes and
the buttons are not pressed, the console will turn
off and the display will be reset.
Contacts
20
HOW TO USE AN ONBOARD WORKOUT
1. Begin pedaIing or press any button on the
consoIe to turn on the consoIe.
When you turn on the console, the display will turn
on. The console will then be ready for use.
2. SeIect an onboard workout.
To select an onboard workout, press the 10 Calorie
Workouts button or the 10 Performance Workouts
button repeatedly until the desired workout appears
in the display.
When you select an onboard workout, the display
will show the duration of the workout and the name
of the workout. A profile of the speed settings of the
workout will appear in the matrix.
The maximum resistance level and the maximum
speed for the workout will also appear in the
display.
3. Begin pedaIing to start the workout.
Each workout is divided into one-minute seg-
ments. One resistance level and one target speed
is programmed for each segment. Note: The same
resistance level and/or target speed may be pro-
grammed for consecutive segments.
During the
workout,
the profile
on the
speed
tab will
show your
progress.
The flashing segment of the profile represents the
current segment of the workout. The height of the
flashing segment indicates the target speed for the
current segment.
At the end of each segment of the workout, a
series of tones will sound and the next segment of
the profile will begin to flash. If a different resis-
tance level and/or target speed is programmed for
the next segment, the resistance level and/or target
speed will appear in the display for a few seconds
to alert you. The resistance of the pedals will then
change.
As you exercise, you will be prompted to keep
your pedaling speed near the target speed for the
current segment. When an upward-pointing arrow
appears in the display, increase your pace. When a
downward-pointing arrow appears, decrease your
pace. When no arrow appears, maintain your cur-
rent pace.
IMPORTANT: The target speed is intended onIy
to provide motivation. Your actuaI pedaIing
speed may be sIower than the target speed.
Make sure to pedaI at a speed that is comfort-
abIe for you.
If the resistance level for the current segment is
too high or too low, you can manually override
the setting by pressing the Resistance buttons.
IMPORTANT: When the current segment of the
workout ends, the pedaIs wiII automaticaIIy
adjust to the resistance IeveI programmed for
the next segment.
The workout will continue in this way until the last
segment ends. To stop the workout at any time,
stop pedaling. The time will flash in the display. To
resume the workout, simply resume pedaling.
4. FoIIow your progress with the dispIay.
See step 4 on page 18.
5. Measure your heart rate if desired.
See step 5 on page 19.
6. When you are finished exercising, the consoIe
wiII turn off automaticaIIy.
See step 6 on page 19.
Profile
21
HOW TO USE AN IFIT LIVE WORKOUT
1. Begin pedaIing or press any button on the
consoIe to turn on the consoIe.
When you turn on the console, the display will turn
on. The console will then be ready for use.
2. Insert the iFit Live moduIe into the consoIe.
To use an iFit Live workout, insert the iFit Live
module into the console. To purchase an iFit Live
moduIe at any time, go to www.iFit.com or caII
the teIephone number on the front cover of this
manuaI. You must have an iFit Live module to use
an iFit Live workout.
Note: To use an iFit Live module, you must have
access to a computer with an internet connection
and a USB port. You will also need an iFit.com
membership. To use a wireless iFit Live module,
you must also have your own wireless network
including an 802.11b router with SSID broadcast
enabled (hidden networks are not supported).
3. SeIect a user.
If more than one user is registered, you can switch
users in the iFit Live main screen. Press the
increase and decrease buttons next to the Enter
button to select a user.
4. SeIect an iFit Live workout.
To select an iFit Live workout, press one of the iFit
Live buttons. Before some workouts will download,
you must add them to your schedule on
www.iFit.com.
Press the iFit Live button to download the next
workout in your schedule. Press the My Trainer
button, the My Maps button, the World Tour button,
or the Event Training button to download the next
workout of that type in your schedule. Press the
Compete button to compete in a race that you have
previously scheduled. For more information on
the iFit Live workouts, pIease see
www.iFit.com.
When you select an iFit Live workout, the display
will show the duration of the workout and the
approximate number of calories you will burn. The
display may also show the name of the workout. If
you select a competition workout, the display may
count down to the beginning of the race.
5. Start the workout.
See step 3 on page 20.
During some workouts, the voice of a personal
trainer will guide you through your workout. You
can select an audio setting for your personal trainer
(see HOW TO CHANGE CONSOLE SETTINGS on
page 22).
To stop the workout at any time, stop pedaling. The
time will flash in the display. To resume the work-
out, simply resume pedaling.
6. FoIIow your progress with the dispIay.
See step 4 on page 18.
The My Trail tab will show a map of the trail you are
walking or running or it will show a track and the
number of laps you complete.
During a competition workout, the Competition tab
will show your progress in the race. As you race,
the top line in the matrix will show how much of the
race you have completed. The other lines will show
other competitors. The end of the matrix represents
the end of the race.
7. Measure your heart rate if desired.
See step 5 on page 19.
8. When you are finished exercising, the consoIe
wiII turn off automaticaIIy.
See step 6 on page 19.
For more information on the iFit Live mode, go to
www.iFit.com.
IMPORTANT: To satisfy exposure compIiance
requirements, the antenna and transmitter in the
iFit Live moduIe must be at Ieast 8 in. (20 cm) from
aII persons and must not be near or connected to
any other antenna or transmitter.
22
HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
sound system while you exercise, plug the included
audio cable into the jack on the console and into a jack
on your MP3 player or CD player; make sure that the
audio cabIe is fuIIy pIugged in.
Next, press the play button on your MP3 player or
CD player. Adjust the volume level using the Volume
increase and decrease buttons on the console or the
volume control on your MP3 player or CD player.
HOW TO CHANGE CONSOLE SETTINGS
The console features a user mode that allows you to
view usage information, select a unit of measurement,
and adjust the contrast level of the display.
When an iFit Live module is connected to the console,
you can also use the information mode to choose an
audio setting for the voice of the personal trainer, set a
default menu, check the status of the iFit Live module,
and check for downloads.
1. SeIect the information mode.
To select the information mode, press and hold
down the Display button for a few seconds until the
information mode appears in the display.
2. View usage information.
The display will show the total number of hours that
the elliptical has been used. The display will also
show the total distance (in miles or kilometers) that
has been pedaled on the elliptical.
3. SeIect a unit of measurement if desired.
The word ENGLISH for English miles or the word
METRIC for metric kilometers will appear in the
display to indicate the currently selected unit of
measurement.
To change the unit of measurement, press the
Enter button repeatedly to select the desired unit of
measurement.
4. Adjust the contrast IeveI of the dispIay if
desired.
Press the decrease button to view the contrast
level. The currently selected contrast level will
appear in the display. Press the Resistance
increase and decrease buttons to adjust the con-
trast level.
5. Determine if an iFit Live moduIe is connected to
the consoIe.
If an iFit Live module is connected to the console,
the display will show the words WIFI MODULE or
USB MODULE.
If no module is connected, the display will show
the words NO IFIT MODULE. If no module is con-
nected, go to step 10.
6. SeIect an audio setting for the voice of the
personaI trainer if desired.
Press the decrease button to view the audio setting
for the voice of the personal trainer. The currently
selected audio setting for the voice of the personal
trainer will appear in the display.
To change the audio setting, press the Enter button
repeatedly to turn the voice of the personal trainer
ON or OFF.
7. Set the defauIt menu if desired.
Press the decrease button to view the default menu
setting. The default menu is the menu that will
appear when you turn on the console. Press the
Enter button repeatedly to select the manual mode
menu or the iFit Live menu as the default menu.
8 Check the status of the iFit Live moduIe if
desired.
Press the decrease button to view the iFit Live
status display. The words CHECK WIFI STATUS or
CHECK USB STATUS will appear in the display.
Then, press the Enter button. After a few seconds,
the status of the iFit Live module will appear in the
display. To exit this display, press and hold down
the Display button for a few seconds.
9. Check for downIoads if desired.
Press the decrease button to view the downloads
display. The words SEND/RECEIVE DATA will
appear in the display.
Then, press the Enter button. The console will
then check for iFit Live workouts and firmware
downloads.
10. Exit the information mode.
Press the Display button to exit the information
mode.
23
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION: To assure continued compIiance, use onIy shieIded interface cabIes when connecting to
computer or peripheraI devices. Changes or modifications not expressIy approved by the party respon-
sibIe for compIiance couId void the user's authority to operate this equipment.
24
Inspect and tighten all parts of the elliptical regularly.
Replace any worn parts immediately.
To clean the elliptical, use a damp cloth and a small
amount of mild soap. IMPORTANT: To avoid damage
to the consoIe, keep Iiquids away from the consoIe
and keep the consoIe out of direct sunIight.
CONSOLE TROUBLESHOOTING
If the console does not display your heart rate when
you hold the handgrip heart rate monitor, or if the dis-
played heart rate appears to be too high or too low, see
step 5 on page 19.
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted.
To adjust the reed
switch, you must
first remove the Top
Shield (20). Using
a flat screwdriver,
release the tabs on
the front and rear of
the Top Shield and
then remove the Top
Shield.
Next, locate the Reed Switch (69). Loosen, but do not
remove, the M4 x 16mm Screw (93).
Next, rotate the Large Pulley (74) until a Magnet (75)
is aligned with the Reed Switch (69). Slide the Reed
Switch slightly toward or away from the Magnet. Then,
retighten the M4 x 16mm Screw (93).
Rotate the Large Pulley (74) for a moment. Repeat
these actions until the console displays correct
feedback.
When the reed switch is correctly adjusted, reattach
the top shield.
MAINTENANCE AND TROUBLESHOOTING
20
93
75
74
69
25
HOW TO ADJUST THE DRIVE BELT
If you can feel the pedals slip while you are pedaling,
even when the resistance is adjusted to the highest
level, the drive belt may need to be adjusted.
To adjust the drive belt, you must remove the top shield
and the left shield (see the instructions below).
Using a flat screwdriver, release the tabs on the front
and rear of the Top Shield (20), and then remove the
Top Shield.
Next, remove the M4 x 16mm Round Head Screws
(127) and the M4 x 42mm Screws (124) from the Right
and Left Shields (18, 19). Make sure to note which
size of Screw you remove from each hoIe. Then,
gently remove the Left Shield.
Loosen the Pivot Screw (97). Then, tighten the Belt
Adjustment Screw (85) until the Drive Belt (38) is tight.
When the Drive Belt (38) is tight, tighten the Pivot
Screw (97).
Then, reattach the left shield and the top shield.
20
38
97
127
19
18
127
124
124
124
127
85
26
EXERCISE GUIDELINES
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper inten-
sity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the near-
est ten years). The three numbers listed above your
age define your "training zone." The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.
Burning Fat-To burn fat effectively, you must exer-
cise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
Aerobic Exercise-If your goal is to strengthen your
cardiovascular system, you must perform aerobic
exercise, which is activity that requires large amounts
of oxygen for prolonged periods of time. For aerobic
exercise, adjust the intensity of your exercise until your
heart rate is near the highest number in your training
zone.
WORKOUT GUIDELINES
Warming Up-Start with 5 to 10 minutes of stretch-
ing and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Training Zone Exercise-Exercise for 20 to 30 min-
utes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise -never hold your breath.
CooIing Down-Finish with 5 to 10 minutes of stretch-
ing. Stretching increases the flexibility of your muscles
and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exer-
cise, you may complete up to five workouts each week,
if desired. Remember, the key to success is to make
exercise a regular and enjoyable part of your everyday
life.
WARNING: Before beginning this
or any exercise program, consuIt your physi-
cian. This is especiaIIy important for persons
over age 35 or persons with pre-existing
heaIth probIems.
The heart rate monitor is not a medicaI device.
Various factors may affect the accuracy of
heart rate readings. The heart rate monitor is
intended onIy as an exercise aid in determin-
ing heart rate trends in generaI.
27
PART LIST
Key No. Qty. Description Key No. Qty. Description
Model No. NTEL06011.2 R0112A
1 1 Frame
2 1 Folding Frame
3 1 Front Stabilizer
4 1 Rear Stabilizer
5 1 Upright
6 1 Right Upper Body Leg
7 1 Left Upper Body Leg
8 1 Right Upper Body Arm
9 1 Left Upper Body Arm
10 1 Handlebar
11 1 Console Cover
12 2 Pedal Arm
13 1 Small Bumper
14 1 Right Pedal
15 1 Left Pedal
16 2 Disc
17 2 Disc Cover
18 1 Right Shield
19 1 Left Shield
20 1 Top Shield
21 1 Right Frame Cover
22 1 Left Frame Cover
23 1 Top Cover
24 1 Rear Upright Cover
25 1 Front Upright Cover
26 1 Accessory Tray
27 1 Right Inner Leg Cover
28 1 Right Outer Leg Cover
29 1 Right Rear Leg Cover
30 1 Right Front Leg Cover
31 1 Left Rear Leg Cover
32 1 Left Front Leg Cover
33 1 Console
34 2 Pulse Sensor
35 2 Handgrip
36 2 Wheel
37 2 Rear Stabilizer Upper Cover
38 1 Drive Belt
39 2 Crank Arm
40 8 M8 Shoulder Screw
41 4 Leveling Foot
42 1 Latch Bracket
43 2 Adjustment Bracket
44 2 Adjustment Pin
45 2 Adjustment Knob
46 2 Knob Cap
47 4 Pivot Arm Bushing
48 1 Upright Axle
49 1 Left Inner Leg Cover
50 1 Left Outer Leg Cover
51 1 Right Pivot Arm
52 1 Left Pivot Arm
53 2 Adjustment Arm Spring
54 2 Rear Stabilizer Lower Cover
55 1 Right Wheel Top Cover
56 1 Left Wheel Top Cover
57 6 Upright Bushing
58 1 Right Wheel Lower Cover
59 1 Audio Cable
60 1 Upright Wire
61 1 Flywheel
62 4 M4 x 16mm Flat Head Screw
63 1 Frame Axle
64 2 Frame Bushing
65 1 Latch Bracket Axle
66 1 Latch Bracket Spring
67 1 Latch Button
68 1 Button Housing
69 1 Reed Switch/Wire
70 1 Clamp
71 1 Crank Hub
72 1 Crank
73 1 Crank Spacer
74 1 Large Pulley
75 2 Magnet
76 2 Folding Frame Bearing
77 1 Idler
78 1 Resistance Motor
79 1 Resistance Arm
80 1 Resistance Wheel
81 1 Resistance Bracket
82 1 Motor Bracket
83 1 C-magnet Bracket
84 1 Flywheel Axle
85 1 Belt Adjustment Screw
86 4 M8 x 28mm Screw
87 2 Medium Snap Ring
88 1 C-magnet Bracket Bolt
89 4 Resistance Motor Screw
90 1 M5 x 7mm Screw
91 1 M3.5 x 12mm Screw
92 1 M6 Locknut
93 40 M4 x 16mm Screw
94 2 M8 Jam Nut
95 1 Ground Screw
96 1 M6 Washer
97 1 Pivot Screw
98 2 Motor Bracket Screw
99 1 Idler Bolt
100 4 M10 x 120mm Screw
28
Note: Specifications are subject to change without notice. For information about ordering replacement parts, see
the back cover of this manual. *These parts are not illustrated.
Key No. Qty. Description Key No. Qty. Description
101 1 Anchored Zip Tie
102 20 M8 x 16mm Screw
103 1 Left Wheel Lower Cover
104 8 M8 x 45mm Button Bolt
105 8 M8 Locknut
106 2 Long Pedal Arm Axle
107 2 M10 x 25mm Screw
108 2 M10 x 32mm Washer
109 1 Frame Wire
110 2 M8 x 23.5mm x 1mm Washer
111 10 M6 x 12mm Screw
112 1 M5 Washer
113 2 Adjustment Bracket Cover
114 2 Pedal Plate
115 2 Short Pedal Arm Axle
116 2 Large Bumper
117 4 Pivot Arm Bushing
118 2 Wave Washer
119 4 Pedal Arm Bushing
120 8 Mushroom Fastener/Screw
121 4 Adjustment Pad
122 1 3/8" x 1/2" Flange Screw
123 6 M8 x 50mm Button Screw
124 4 M4 x 42mm Screw
125 1 Receptacle/Wire
126 10 M8 x 23mm x 1.5mm Washer
127 12 M4 x 16mm Round Head Screw
128 4 M10 Split Washer
129 2 Adjustment Nut
130 1 Small Snap Ring
131 6 M8 Split Washer
132 3 M4 x 25mm Screw
133 1 Frame Cap
134 2 Large Snap Ring
135 2 Pulse Wire
136 1 Power Adapter
* - Users Manual
* - Assembly Tool
29
EXPLODED DRAWING A
9
3
9
3
5
2
4
2
6
1
1
1
0
3
4
5
9
2
5
9
3
9
3
9
3
9
3
9
3
5
7
5
7
3
4
3
3
2
3
9
3
9
3
9
3
2
2
9
3
2
1
1
0
2
2
0
1
2
4
1
2
4
1
8
1
9
1
2
4
1
2
4
1
2
7
1
2
7
1
2
7
1
3
2
1
3
5
Model No. NTEL06011.2 R0112A
30
8
2
9
6
9
0
7
8
8
9
8
0
9
1
8
3
7
7
9
4
9
8
9
7
9
2
9
9
1
1
2
1
3
0
8
1
7
9
1
2
9
9
4
8
4
6
8
9
3
2
1
0
1
9
3
9
3
5
4
5
4
9
3
9
3
9
3
9
3
9
5
8
5
8
8
6
1
6
7
4
2
4
1
1
1
0
1
1
0
1
0
2
6
5
1
0
2
6
6
6
4
1
0
8
1
0
7
6
4
6
3
1
0
8
1
0
7
8
6
8
6
8
7
7
6
7
3
7
4
7
5
7
5
7
6
8
7
7
1
1
2
2
1
0
0
1
3
3
4
7
2
9
3
5
6
7
0
6
9
6
0
3
8
1
6
3
9
4
0
1
7
1
6
1
1
7 3
9
4
0
4
0
1
0
2
1
0
2
1
0
2
3
7
3
7
1
0
0
4
0
1
2
0
1
2
0
1
2
0
1
2
0
3
6
5
5
5
8
1
0
5
1
0
5
1
0
3
1
0
4
3
3
6
1
0
4
4
1
4
1
4
1
1
0
9
1
2
5
1
3
6
1
3
1
3
2
1
2
7
1
2
7
1
2
7
1
2
7
1
2
8
1
2
8
1
2
8
1
3
1
1
3
1
EXPLODED DRAWING B Model No. NTEL06011.2 R0112A
31
EXPLODED DRAWING C Model No. NTEL06011.2 R0112A
1
2
6
5
7
1
0
5
1
0
5
1
0
5
1
1
9
1
2
6
1
0
2
1
1
9
1
0
6
1
2
6
1
0
2
1
2
3
1
0
2
1
2
6
1
1
6
1
1
7
1
1
7
1
1
5
1
0
2
1
1
1
1
1
1

1
1
7
1
1
7
1
1
6
1
1
5
1
0
2
1
2
6
1
2
3
1
2
6
1
0
2
1
2
3
1
1
9
1
2
6
1
0
2
1
2
6
1
0
2
1
0
6
1
2
6
1
0
2
1
2
6
1
0
2
5
7
3
5
9
1
5
1
2



4
3
5
3
4
4
1
1
1
1
1
1
4
5
4
7
4
7
4
4
5
2
4
6
5
3
4
3
4
7
5
1
4
5
1
1
1
1
1
1
1
2
1
4
4
7
4
6
2
8
2
7
6
2
9
8
3
0
3
5
5
7
1
1
8
5
7
1
1
8
4
8
3
2
3
1
9
3
9
3
9
3
9
3
9
3
6
2
6
2
4
9
5
0
7
1
1
4
1
2
1
1
0
4
1
0
4
1
1
3
1
2
1
1
1
4
1
1
3
1
3
4
1
3
4
9
3
9
3
Part No. 324104 R0112A Printed in China 2011 ICON IP, Inc.
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions. The frame is warranted for a lifetime. Parts and labor
are warranted for one (1) year from the date of purchase.
This warranty extends only to the original purchaser (customer). ICON`s obligation under this warranty is
limited to repairing or replacing, at ICON`s option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be preauthorized by ICON. If the product is shipped
to a service center, freight charges to and from the service center will be the customer`s responsibility. If
replacement parts are shipped while the product is under warranty, the customer will be responsible for a
minimal handling charge. For in-home service, the customer will be responsible for a minimal trip charge.
This warranty does not extend to freight damage to the product. This warranty will automatically be voided
if the product is used as a store display model, if the product is purchased or transported outside the USA,
if all instructions in this manual are not followed, if the product is abused or improperly or abnormally used,
or if the product is used for commercial or rental purposes. No other warranty beyond that specifically set
forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special, or consequential damages arising out of or in con-
nection with the use or performance of the product; damages with respect to any economic loss, loss of
property, loss of revenues or profits, loss of enjoyment or use, or costs of removal or installation; or other
consequential damages of any kind. Some states do not allow the exclusion or limitation of incidental or
consequential damages. Accordingly, the above limitation may not apply to the customer.
The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties of
merchantability or fitness for a particular purpose are limited in their scope and duration to the terms set
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the
above limitation may not apply to the customer.
This warranty provides specific legal rights; the customer may have other rights that vary from state to
state.
ICON HeaIth & Fitness, Inc., 1500 S. 1000 W., Logan, UT 84321-9813
LIMITED WARRANTY
IMPORTANT: You must register this product within 30 days of the purchase date to avoid added
fees for service needed under warranty. Go to www.nordictrackservice.com/registration.
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
provide the following information when contacting us:
the model number and serial number of the product (see the front cover of this manual)
the name of the product (see the front cover of this manual)
the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED
DRAWING near the end of this manual)
ORDERING REPLACEMENT PARTS