Program Name: CE's APQP and Product Launch System (APLS)
Program Name: CE's APQP and Product Launch System (APLS)
Program Name: CE's APQP and Product Launch System (APLS)
11 11:14
Program Name
Product & Machine Information
Part Name
Faceplate
Texture Type
see below
MOLD TYPE
Prototype
MOLD CONSTRUCTION
X
Standard Three Plate Reverse Ejection Modular Stack Cavities Inserted In Solid Cores A Plate B Plate
STEEL TYPE
P-20 P-20
EJECTION
SH
COOLING
MH Blocks
SIDE ACTIONS
Qty
Mechanical Slides Hydraulic Slides Hydraulic Cylinders Cam Pins Air Cylinder Spring Loaded Hand Load
X Standard
Reverse Hydraulic Mechanical Ejector Pins Ejector Blades Ejector Sleeves Lifters Strippers 2 Stage Ejection Air Poppets Guided Ejection Spring Loaded Cover Assist Ejection Accelerated Ejection Early Returns Other Notes: Notes:
Mold Base Slides Inserts Lifters Core Pins Clamp Plates Stripper Plates Thermal Pins Baffles Bubblers Rotating Water Junction Other
Lifters Other
2008.09.11 11:14
Program Name
GATING
SH
PLATING
MH Nitriding Electrodes Ni Chrome Polyond Armoloy XADC Other Specify Plated Area(s) In Cavity:
SPECIAL FEATURES
Qty:
Cold Sprue Center Cold Sprue Offset Hot Drop Manifold Valve Gate
X X
Date Codes Shift Codes Material ID Floating Plates Transducers PL Locks Switches Engraving
X X X
QMC Plates Cycle Counter Mold Samples Gate Inserts Cavity Shut-Off
X
X
FINISHES
SH A1 - Grade #3 Diamond Buff A2 - Grade #6 Diamond Buff A3 - Grade #15 Diamond Buff B1 - 600 Grit Paper B2 - 400 Grit Paper B3 - 320 Grit Paper C1 - 600 Stone C2 - 400 Stone C3 - 320 Stone D1 - Dry Blast Glass bead #11 D2 - Dry Blast #240 Oxide D3 - Dry Blast #24 Oxide Other Special Instructions and Comments: MH
THREADS
Auto-Unscrewing (Rack) Auto-Unscrewing (Motor) Hand Loads extra sets Line of Draw Out of Draw Expanding Hasco Other
PROCESS FEATURES
Gas Assist In-Mold Decorating Insert Molding Two-Shot
GENERAL INFO
No. of Samples: Build Timing (wks): Data Release Date: Tool Certification: Quote Number: Job Number: yes 1
Quote cold sprue/runner to subgate into tab (1 per cav) Quote optional 1 drop (1 per cav) pneumatic valve gate hot-half from Incoe (include installation) Quote seperately #3 Ford Stipple Quote line item for QMC Plates, Lift Lug and Water manifolds
Notes: 1) All quotes submitted must be based off of Cascade Engineering's Tool Build Standards. Any deviation from our Tool Build Standards must be authorized and documented by the Project Tool Engineer. 2) All 2-D and 3-D Tool Data Is Property of Cascad
2005.07.19 2005.07.22