Xounterbalance Valves Sun
Xounterbalance Valves Sun
Xounterbalance Valves Sun
Cartridge Type
Page
48
49
50
51
52
53
54
55
4 2 1
56
4 2 1
57
47
Counterbalance Valves Relief Valves STANDARD, 280 BAR MAXIMUM SETTING PILOT OPERATED, BALANCED PISTON
Turn screw clockwise to reduce Full Adjustment 5 Turns setting and release load. + - 3 3/4 Turns Complete Adjustment
+
2
2 1
c b
3 Pilot
c
Locating Shoulder
Locating Shoulder
Outlet
Load 1
2 2 Valve
Inlet 1
Typical Typical Capacity Cartridge Cavity Capacity Cartridge a Model Code Cavity Model Code 60 L/min. T 11A CBCA LHN 12 GPM T - 162A 1.22 RPCC LAN 120 L/min. T - 2A CBEA LHN 25 GPM T 10A 1.56 RPEC LAN 240 L/min. T - 17A CBGA LHN 50 GPM T - 3A 1.88 RPGC LAN 480 L/min. T - 19A CBIA LHN 100 GPM T - 16A 2.44 RPIC LAN
200 GPM RPKC LAN T - 18A 3.13
Cartridge Dimensions Cartridge Dimensions c c a b L b L C 34,9 22,2 50 3/4 2.11 2.17 34,9 28,6 61 7/8 2.00 2.06 46 31,8 70 1 1/8 2.12 2.18 63,5 41,3 90 1 1/4 2.44 2.47
1 5/8 2.81 2.94
C 56 64 84 104
Installation Installation Torque Torque (Nm) (lb. ft.) 40/50 25/30 60/70 30/35 200/215 45/50 465/500 150/160
350/375
RPEC
5000
CBE*
30 25
30 25
Free Flow and Pilot Open Pressure Drop Typical Pressure Rise
P = bar
5000
RPGC
CBG*
30 25 20 15 10 5 0 0
40 60
RPIC
5000
CBI*
30 25
RPKC
5000
P = bar
P = bar
P = bar
P = psi
P = psi
P = psi
P = psi
P = psi
4000
20 15 10 0 0 15
20
4000
2000
Free Flow
1000 30 45 25 = L/min. Q 0
20 15 10 5 0 0
30
Piloted Open
4000
4000
20 15 10 0
3000 2000
Free Flow
2000
Free Flow
60
10 20
30
40 50 Q
60
90
120
20
60
80 100 Q
240
40 80 120
120
160 200 Q
360
80
480
10
15
Flow = GPM
Flow = GPM
= L/min.0
Flow = GPM
Flow = GPM
Flow = GPM
160
240
320 400
I I I I I I I I I I I I
Load holding to 215 bar with 280 bar valve setting Maximum operating pressure = 5000 psi Maximum valve leakage at reseat = 0,4 cc/min. Will accept maximum pressure at Port 2. Reseat exceeds 85% of set pressure Back pressure on the tank port (port 2) is directly additive at a 1:1 ratio to the valve setting. Factory pressure setting established at 32,8 cc/min. Factory pressure settings established at 4 GPM Counterbalance should Typical responsevalves time 10 ms. be set at least 1.3 times the maximum load induced pressure. Back pressure at port 2 adds to the effective relief setting at a ratio of 1 plus the pilot ratio times the Maximum leakage = RPCC, RPEC: 2 in 3/min./1000 psi, RPGC: 3 in3/min./1000 psi, RPIC: 4 back pressure. 3 3 in /min./1000 psi, RPKC: 5 in /min./1000 psi. RPCC minimum setting for all spring ranges is 75 psi
Model Codes printed in Red are Preferred Versions and most readily available
RP C CB
Nominal Capacity C 60 L/min. E 120 L/min. G 240 L/min. I 480 L/min.
C E G I K Nominal Capacity
Version
Control**
Adjustment Range Cracking Pressure Seal Control** +$ 0.00 V Viton H 70 - 280 bar +$ 2.00 I 25 - 105 bar +$ 1.00 +$ 0,3 1.00 Bar Check Spring +$ 2.00 V Viton
Seal
12 GPM* $ Pilot 31.90 0.00Screw A 100 - 3000 psi A 3:1 Ratio L Standard Screw L +$ Standard 25 GPM $ 36.20 C Tamper Resistant 4.10 B 50 - 1500 psi B 1.5:1 Pilot Ratio C +$ Tamper Resistant (with sealed pilot) 50 GPM $ 51.80 K Handknob +$ 5.00 C 150 - 6000 psi
Y 2:1 Ratio 100 GPM $ Pilot 97.30 (with Bleed through 200 GPM Pilot) $187.00
B 25 - 105 bar Adjustment Range Options: A, B, C, and W are standard set at 1000 psi. N Option is standard set at 400 psi . Adjustment Range Options: Q Option is standard set at 200 H psi . standard set at 210 bar. A and are ** See page 162* for information and Branges. are standard set at 70 bar. ** See page 162 for information Minimum setting 75 psiIon all Customer may specify setting. on Control Options on Control Options Customer may specify pressure setting. +$ 1.10
Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products. Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products. 6 US Shortcut Catalogue #999-901-243 48 UK Shortcut Catalogue #999-901-244
Counterbalance Valves Relief Valves STANDARD, 350 BAR MAXIMUM SETTING PILOT OPERATED, BALANCED PISTON
Turn screw clockwise reduce Full Adjustment 5 to Turns setting and release load. + - 3 3/4 Turns Complete Adjustment
+
1
3
c
b
c
Locating Shoulder
Locating Shoulder
3 Pilot
2 2 Valve
Outlet
Load 1
Inlet 1
Capacity Capacity 60 L/min. 12 GPM 120 L/min. 25 GPM 240 L/min. 50 GPM 480 L/min. 100 GPM
Typical Cartridge Cavity Typical Model Cartridge Code Cavity Model Code T - 11A CBCG LJN T - 162A RPCC LAN T - 2A CBEG LJN T - 10A RPEC LAN T - 17A CBGG LJN T - 3A RPGC LAN T - 19A CBIG LJN T - 16A RPIC LAN
Cartridge Dimensions Cartridge Dimensions c a b c L b L C 34,9 22,2 50 3/4 2.11 2.17 34,9 28,6 61 7/8 2.00 2.06 46 31,8 70 1 1/8 2.12 2.18 63,5 41,3 90 1 1/4 2.44 2.47
C 56 64 84 104
Installation Torque Installation (Nm) Torque (lb. ft.) 40/50 25/30 60/70 30/35 200/215 45/50 465/500 150/160
200 GPM
RPKC LAN
T - 18A
1 5/8
2.81
2.94
350/375
RPEC
5000
Piloted Ope Open
CBE*
30 25
30 25
Free Flow and Pilot Open Pressure Drop Typical Pressure Rise 30
P = bar
5000
RPGC
CBG*
RPIC
5000
CBI*
30 25
RPKC
5000
25 20 15 10 5 0 0
40 60
P = bar
P = bar
P = bar
P = psi
P = psi
P = psi
P = psi
3000 2000
P = psi
4000
20 15 10 0 0 15
20
4000
Free Flow
30
1000 45 0
20 15 10 5 0 0
30
Piloted Open
4000
4000
20 15 10 0
2000
Free Flow
60
10 20
30
40
60
90
120
20
60
240
40 80 120
120
160 200 Q
480
10
15
Q = L/min. 25
I I I I I I I I I I I I
Flow = GPM
Flow = GPM
Q 50 = L/min. 0
Flow = GPM
Q 80 100
= L/min.0
Flow = GPM
Flow = GPM
160
240
320 400
Load holding to 270 bar with 350 bar valve setting Maximum operating pressure = 5000 psi Maximum valve leakage at reseat = 0,4 cc/min. Will accept maximum pressure at Port 2. Reseat exceeds 85% of set pressure Back pressure on the tank port (port 2) is directly additive at a 1:1 ratio to the valve setting. Factory pressure setting established at 32,8 cc/min. Factory pressure settings established at 4 GPM Counterbalance valves should be set at least 1.3 times the maximum load induced pressure. Typical response time 10 ms. Back pressure at port 2 adds to the effective relief setting at a ratio of 1 plus the pilot ratio times Maximum leakage = RPCC, RPEC: 2 in 3/min./1000 psi, RPGC: 3 in3/min./1000 psi, RPIC: 4 the back pressure. in3/min./1000 psi, RPKC: 5 in3/min./1000 psi. RPCC minimum setting for all spring ranges is 75 psi
Model Codes printed in Red are Preferred Versions and most readily available
RP C CB
Nominal Capacity C 60 L/min. E 120 L/min. G 240 L/min. I 480 L/min.
Nominal Capacity C E G I K
Version
Control**
Seal
12 GPM* $ 31.90 L Standard ScrewL Standard +$ 0.00 A 100 - 3000 psi G 4.5:1 Pilot Ratio Screw 25 GPM $ Pilot 36.20 +$ 4.10 B 50 - 1500 psi H 10:1 RatioC Tamper Resistant C Tamper Resistant 50 GPM $ 51.80 K Handknob L 2.3:1 Pilot Ratio (with sealed pilot) 100 GPM $ 97.30 200 GPM $187.00 +$ 5.00 C 150 - 6000 psi N 60 - 800 psi Q 60 - 400 psi W 150 - 4500 psi
+$ 1,7 0.00 N Buna-N Bar Check Spring +$ 0.00 N Buna-N +$ 140 0.00 V Viton J - 350 bar +$ 70 2.00 K - 175 bar +$ 1.00
Bar Check Spring +$ 0,3 1.00 C - 350 bar +$ 140 0.00
+$ 2.00 V Viton
D 70 - 175 bar Adjustment Range Options: A, B, C, and W are standard set at 1000 psi. N Option is standard Adjustment set at 400 psi . Range Options: Q Option is standard set J at 200 . standard set at 210 bar. and Cpsi are ** See page 162 for information Minimum setting 75 psi allD ranges. ** See page 162 * for information Kon and are standard set at 140 bar. on Control Options on Control Options Customer may specify pressure setting. +$ 1.10 Customer may specify setting.
Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products. Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products. 6 US Shortcut Catalogue #999-901-243 UK Shortcut Catalogue #999-901-244 49
c c
b
3 Pilot Shoulder
2 Valve
2 Outlet
Cartridge Dimensions Typical c Capacity Cartridge Cavity a b Cartridge Dimensions L Model Code Typical c 40 L/min. Cartridge 34,9 b 22,2 50 CBBC LHN CavityT - 11A a Capacity L C Code LHN 80 L/min. Model T - 2A 34,9 28,6 61 CBDC 12 GPM T - 162A 1.22 3/4 2.11 2.17 RPCC LAN 160 L/min. T - 17A 46 31,8 70 CBFC LHN 25 GPM T - 10A 1.56 7/8 2.00 2.06 RPEC LAN
C 56 64 84
Installation Torque (Nm) Installation 40/50 Torque K (lb. ft.) 60/70 2.31 25/30 200/215 2.25 30/35
Load
T - 3A T - 16A T - 18A
CBB*
CBD*
CBF*
RPEC 30
25
RPGC 30
25
RPIC 30
25 20
5000 Piloted Open 10 4000 3000 0 2000 1000
Free Flow
RPKC
5000
P = bar
P = psi P = bar
20
Piloted Open 5000 10 4000
5000
P = psi
0 3000 0 2000
1000
Free Flow
Free Flow
P = psi
4000
15
30
45
60
Q = L/min.
0 10 20 30 40 50
P = psi P = bar
P = psi
60
90
120
60
120
180
240
Q = L/min.
40 60 80 100
Q = L/min.
0 40 80 120 160 200
Flow = GPM
I I I I I I I I I I I
25
Load holding 215 bar with 280 bar valve setting Flow = GPM Flow = GPM Flow = GPM Flow to = GPM Maximum valve leakage at reseat = 0,4 cc/min. Maximum operating pressure = 5000 psi Reseat exceeds 85% ofpressure set pressure Will accept maximum at Port 2. Factory pressure setting established cc/min. Back pressure on the tank port (port at 2)32,8 is directly additive at a 1:1 ratio to the valve setting. Counterbalance valves should be set at least 1.3 times the maximum load induced pressure. Factory pressure settings established at 4 GPM Back pressure at port adds Typical response time2 10 ms.to the effective relief setting at a ratio of 1 plus the pilot ratio times the back pressure. Maximum leakage = RPCC, RPEC: 2 in 3/min./1000 psi, RPGC: 3 in3/min./1000 psi, RPIC: 4 in3/min./1000 psi, RPKC: 5 in3/min./1000 psi. RPCC minimum setting for all spring ranges is 75 psi
80
160
240
320 400
Model Codes printed in Red are Preferred Versions and most readily available
RP C CB
Nominal Capacity B 40 L/min. D 80 L/min. F 160 L/min.
Nominal Capacity C E G I K
Version
Control**
Adjustment Range Cracking Pressure Seal Control** +$ 0.00 V Viton H 70 - 280 bar +$ 2.00 I 25 - 105 bar +$ 1.00 +$ 0,3 1.00 Bar Check Spring +$ 0.00 A 70 - 280 bar +$ 2.00 V Viton
Seal
12 GPM* $ 31.90 L Standard Screw L B 1.5:1 Pilot Ratio (with sealed pilot) 25 GPM $ 36.20 C Tamper Resistant C C 3:1 Pilot Ratio 50 GPM $ 51.80 K Handknob (with sealed pilot) 100 GPM $ 97.30 200 GPM $187.00
+$ 0.00Screw A 100 - 3000 psi Standard +$ 4.10 B 50 - 1500 psi Tamper Resistant +$ 5.00 C 150 - 6000 psi N 60 - 800 psi Q 60 - 400 psi W 150 - 4500 psi
B 25 - 105 bar Adjustment Range Options: A, B, C, and W are standard set at 1000 psi . Adjustment Range Options: A and are N Option is standard set at 400 H psi . standard set at 210 bar. ** See page 162Q for information I and are Option is standard set at 200B psi . standard set at 70 bar. on Control Options may specify setting. ** See page 162 for information * Minimum setting 75Customer psi on all ranges. on Control Options Customer may specify pressure setting. +$ 1.10 Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products.
Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products. 50 UK Shortcut Catalogue #999-901-158 6 US Shortcut Catalogue #999-901-243
c c
b
3 Pilot Shoulder
2 Valve
2 Outlet
Cartridge Dimensions Typical c Cartridge Cavity a b Cartridge Dimensions L Model Code Typical c 34,9 b 22,2 50 CBBD LJN CavityT - 11A a Cartridge L C Model Code LJN T - 2A 34,9 28,6 61 CBDD T - 162A 1.22 3/4 2.11 2.17 RPCC LAN T - 17A 46 31,8 70 CBFD LJN T - 10A 1.56 7/8 2.00 2.06 RPEC LAN
C 56 64 84
Installation Torque (Nm) Installation 40/50 Torque K (lb. ft.) 60/70 2.31 25/30 200/215 2.25 30/35
Load
T - 3A T - 16A T - 18A
CBB*
CBD*
CBF*
RPEC 30
25
RPGC 30
25
RPIC 30
25 20
5000 Piloted Open 10 4000 3000 0 2000 1000
Free Flow
RPKC
5000
P = bar
P = psi P = bar
20
Piloted Open 5000 10 4000
5000
P = psi
0 3000 0 2000
1000
Free Flow
Free Flow
P = psi
4000
15
30
45
60
Q = L/min.
0 10 20 30 40 50
P = psi P = bar
P = psi
60
90
120
60
120
180
240
Q = L/min.
40 60 80 100
Q = L/min.
0 40 80 120 160 200
Flow = GPM
I I I I I I I I I I I
25
Load holding 270 bar with 350 bar valve setting Flow = GPM Flow = GPM Flow = GPM Flow to = GPM Maximum valve leakage at reseat = 0,4 cc/min. Maximum operating pressure = 5000 psi Reseat exceeds 85% ofpressure set pressure Will accept maximum at Port 2. Factory pressure setting established cc/min. Back pressure on the tank port (port at 2)32,8 is directly additive at a 1:1 ratio to the valve setting. Counterbalance valves should be set at least 1.3 times the maximum load induced pressure. Factory pressure settings established at 4 GPM Back pressure at port adds Typical response time210 ms.to the effective relief setting at a ratio of 1 plus the pilot ratio times the back pressure. Maximum leakage = RPCC, RPEC: 2 in 3/min./1000 psi, RPGC: 3 in3/min./1000 psi, RPIC: 4 in3/min./1000 psi, RPKC: 5 in3/min./1000 psi. RPCC minimum setting for all spring ranges is 75 psi
80
160
240
320 400
Model Codes printed in Red are Preferred Versions and most readily available
RP C CB
Nominal Capacity B 40 L/min. D 80 L/min. F 160 L/min.
Nominal Capacity C E G I K
Version
Control**
Adjustment RangeCracking Pressure Seal Control** +$ 140 0.00 J - 350 V bar Viton +$ 2.00 K 70 - 175 bar +$ 1.00 +$ 0,3 1.00 Bar Check Spring +$ 140 0.00 C - 350 bar +$ 2.00 V Viton
Seal
12 GPM* $ 31.90 L Standard ScrewL D 4.5:1 Pilot Ratio (with sealed pilot) 25 GPM $ 36.20 C Tamper Resistant C L 2.3:1 Pilot Ratio 50 GPM $ 51.80 K Handknob (with sealed pilot) 100 GPM $ 97.30 200 GPM $187.00
+$ 0.00 A 100 - 3000 psi Standard Screw +$ 4.10 B 50 - 1500 psi Tamper Resistant +$ 5.00 C 150 - 6000 psi N 60 - 800 psi Q 60 - 400 psi W 150 - 4500 psi
D 70 - 175 bar Adjustment Range Options: A, B, C, and W are standard set at 1000 psi . Adjustment Range Options: J and are N Option is standard set at 400C psi . standard set at 210 bar. ** See page 162 Q for information are Option is standard set K at and 200 D psi . standard set at 140 bar. on Control Options may specify setting. ** See page 162 for information * Minimum setting 75Customer psi on all ranges. on Control Options Customer may specify pressure setting. +$ 1.10 Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products.
Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products. 51 6 US Shortcut Catalogue #999-901-243
c
Locating Locating Shoulder Shoulder
3 Pilot
Capacity 15 L/min.
2 Valve
Cartridge Dimensions T - 11A 34,9 22,2 50 56 CBBA LHN Typical c Capacity Cartridge Cavity a b L C 30 L/min. Model T - 2A 34,9 28,6 61 64 CBDA Code LHN 12 60 GPM T - 162A LAN LHN L/min. RPCCCBFA T - 17A 1.22 46 3/4 31,8 2.11 70 2.17 84 25 80 GPM T - 10A LAN LHN L/min. RPEC CBHA T - 19A 1.56 63,5 7/8 41,3 2.00 90 50 GPM T - 3A 1.88 1 1/8 2.12 RPGC LAN 100 GPM 200 GPM RPIC LAN RPKC LAN T - 16A T - 18A 2.44 3.13 1 1/4 1 5/8 2.44 2.81
Cavity
Cartridge Dimensions c b L
Torque
150/160 350/375
CBB*
CBD*
30 25
CBF*
30 25 20 15 10 5 0
CBH*
30 25
RPEC
P = bar P = bar
Piloted Open
RPGC
5000
RPIC
P = bar
5000
RPKC
Piloted Open
5000
P = psi
P = psi
P = psi
P = psi
0 0 15
30
60
30
60 2000 90
120
60
1000 Q = L/min. 15 20 25 0 10 20 30 40
1000 Q = L/min. 50 0 20 40 60 80
Q = L/min.
100 0
P = psi
4000
20 15 10
5000 4000
20 15 10 5 0
P = bar
Piloted Open
Piloted Open
4000
20 15 10 0 0 120
360
480
Flow = GPM
I
I I I I I I I I
I I I I
Flow = GPM Flow = GPM Flow = GPM Flow = GPM Restrictive valves have no relief capacity other than as a thermal relief. Maximum operating pressure = 5000 Load holding to 215 bar with 280 bar psi valve setting Will acceptvalve maximum pressure at Port Maximum leakage at reseat = 0,42. cc/min. Back pressure the of tank (port 2) is directly additive at a 1:1 ratio to the valve setting. Reseat exceedson 85% setport pressure Factory establishedat at32,8 4 GPM Factory pressure pressure settings setting established cc/min. Typical response time 10 ms. Counterbalance valves should be set at least 1.3 times the maximum load induced pressure. Maximum leakage = RPCC, RPEC: 2 in 3/min./1000 psi, RPGC: 3 in3/min./1000 psi, RPIC: 4 Back pressure psi, at port 2 adds to the effective relief setting at a ratio of 1 plus the pilot ratio times the 3/min./1000 3/min./1000 in RPKC: 5 in psi. back pressure.
Model Codes printed in Red are Preferred Versions and most readily available
RP C CB
Nominal Capacity B 15 L/min. D 30 L/min. F 60 L/min. H 80 L/min.
Nominal Capacity C E G I K 12 GPM* 25 GPM
Version
$ 31.90
Control** +$ 0.00
Control**
Adjustment Range
Cracking Pressure
V Viton
Seal
Seal N Buna-N
50 GPM
A 3:1 Pilot Ratio L Standard Screw $ 36.20 C Tamper Resistant +$ 4.10 B 50 - 1500 psi (with sealed pilot) C Tamper Resistant
$ 51.80 K Handknob +$ 5.00 N 60 - 800 psi Q 60 - 400 psi
L Standard Screw
+$ 0.00
N Buna-N +$ 0.00
H 70 - 280 bar
+$ 2.00
V Viton
A 70 - 280 bar
Adjustment Range Options: B 25 - 105 bar A, B, C, and W are standard set at 1000 psi. N Option is standard set at 400 psi. Q Option is standard set at 200 psi . Adjustment Range Options: ** See page 162 for information * Minimum setting 75 psiA on allH ranges. and are standard set at 210 bar. on Control Options** See page 162Customer may specify pressure setting. +$ 1.10 for information I and B are standard set at 70 bar.
on Control Options
Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products. 52
Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products. 6 US Shortcut Catalogue #999-901-243
UK Shortcut Catalogue #999-901-244
c
Locating Locating Shoulder Shoulder
3 Pilot
Capacity 15 L/min.
Cavity
a 34,9
2 Valve
T - 11A CBBG LJN Typical Capacity Cartridge Cavity a 30 L/min. Model T - 2A CBDG Code LJN 12 60 GPM T - 162A LAN LJN L/min. RPCCCBFG T - 17A 1.22
25 80 GPM T - 10A LAN LJN L/min. RPEC CBHG T - 19A 1.56 50 GPM T - 3A 1.88 RPGC LAN 100 GPM 200 GPM RPIC LAN RPKC LAN T - 16A T - 18A 2.44 3.13
Cartridge Dimensions c b L
C 56 64
K 2.31
2.17 84
CBB*
30 25 20 15 10
CBD*
30 25
CBF*
30 25 20 15 10 5 0
CBH*
30 25
RPEC
P = bar
Piloted Open
RPGC
5000
RPIC
P = bar
5000
RPKC
Piloted Open
5000
P = psi
P = psi
P = psi
P = psi
0 0 15
P = psi
4000
4000
20 15 10 5 0 0 30
P = bar
Piloted Open
Piloted Open
4000
20 15 10 0
30
60
60 2000 90
120
60
240
120
360
480
1000 Q = L/min. 15 20 25 0 10 20 30 40
1000 Q = L/min. 50 0 20 40 60 80
Q = L/min.
100 0 40 80 120 160 200
Flow = GPM
I
I I I I I I I I
I I I I
Flow = GPM Flow = GPM Flow = GPM Flow = GPM Restrictive valves have no relief capacity other than as a thermal relief. Maximum operating pressure = 5000 Load holding to 270 bar with 350 bar psi valve setting Will acceptvalve maximum pressure at Port Maximum leakage at reseat = 0,42. cc/min. Back pressure on the of tank (port 2) is directly additive at a 1:1 ratio to the valve setting. Reseat exceeds 85% setport pressure Factory establishedat at32,8 4 GPM Factory pressure pressure settings setting established cc/min. Typical response time 10 ms. Counterbalance valves should be set at least 1.3 times the maximum load induced pressure. Maximum leakage = RPCC, RPEC: 2 in 3/min./1000 psi, RPGC: 3 in3/min./1000 psi, RPIC: 4 Back pressure psi, at port 2 adds to the effective relief setting at a ratio of 1 plus the pilot ratio times the 3/min./1000 3/min./1000 in RPKC: 5 in psi. back pressure.
Model Codes printed in Red are Preferred Versions and most readily available
RP C CB
Nominal Capacity B 15 L/min. D 30 L/min. F 60 L/min. H 80 L/min.
Nominal Capacity C E G I K 12 GPM* 25 GPM
Version
$ 31.90
Control** +$ 0.00
Control**
Adjustment Range
Cracking Pressure
V Viton
Seal
Seal N Buna-N
50 GPM
G 4.5:1 Pilot Ratio L Standard Screw $ 36.20 C Tamper Resistant +$ 4.10 B 50 - 1500 psi (with sealed pilot) C Tamper Resistant
$ 51.80 K Handknob +$ 5.00 $ 97.30 $187.00 N 60 - 800 psi Q 60 - 400 psi
L Standard Screw
+$ 0.00
N Buna-N +$ 0.00
+$ 2.00
V Viton
Adjustment Range Options: D 70 - 175 bar A, B, C, and W are standard set at 1000 psi. N Option is standard set at 400 psi. Q Option is standard set at 200 psi . Adjustment Range Options: ** See page 162 for information * Minimum setting 75 psiJon allC ranges. and are standard set at 210 bar. on Control Options** See page 162Customer may specify pressure +$at 1.10 for information K and D setting. are standard set 140 bar.
on Control Options
Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products. Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products. 6 US Shortcut Catalogue #999-901-243
UK Shortcut Catalogue #999-901-244
53
b
3
c c
Locating Shoulder Locating Shoulder
2 2 Valve Outlet
Load 1 Inlet 1
a a
Cartridge Dimensions Cartridge Dimensions Typical c Typical c Capacity Cartridge Cavity a b Capacity Cartridge a b L C Model Code Cavity L C Model Code 60 L/min. T 11A 34,9 22,2 50 56 LAN 12 GPM T - 162A 1.22 3/4 2.11 2.17 RPCCCCCA LAN 120 L/min. RPECCCEA T - 2A 1.56 34,9 7/8 28,6 2.00 61 2.06 73 LAN 25 GPM T - 10A LAN 240 L/min. RPGCCCGA LAN 50 GPM T - 3AT - 17A 1.88 46 1 1/8 31,8 2.12 70 LAN 480 L/min. RPIC CCIA T - 19A 2.44 63,51 1/4 41,3 2.44 90 LAN 100 GPM T - 16A LAN
200 GPM RPKC LAN T - 18A 3.13 1 5/8 2.81 2.18 84 2.94
Installation Installation Torque Torque (Nm) K (lb. ft.) 40/50 2.31 25/30 60/70 2.25 30/35
2.38 3.06
Performance Curves
RPCC
5000
CCCA
350 300 250 200 150 100 0
15 20 25
RPEC
5000
CCEA
350 300 250 200 150 100 50 0
RPGC
5000
CCGA
350 300 250 200 150 100 50 0
RPIC
5000
CCIA
350 300 250 200 150 100 0 120
160 200
RPKC
5000
P = bar
P = psi
P = bar
P = bar
P = bar
P = psi
4000
4000
4000
4000
10
Flow = GPM
15
I
30
45
10
60
Q = L/min.
I I I I I I
I I I I
Flow = GPM
20
30
40
30
50
60
90
20
120
Q = L/min.
Flow = GPM
40
60
80
60
100
120
180
40
240
Q = L/min.
0 Flow = GPM
80
120
240
360
80
Q = L/min.
Flow = GPM
480
160
240
320 400
I
I
Maximum pressure = at 280 bar Will acceptoperating maximum pressure Port 2. Maximum valve atport reseat = 0,4 cc/min. Back pressure onleakage the tank (port 2) is directly additive at a 1:1 ratio to the valve setting. Reseat exceeds 85% of set pressure at 4 GPM Factory pressure settings established Typical response time 10 ms. Factory pressure setting established at 32,8 cc/min. 3/min./1000 psi, RPGC: 3 in3/min./1000 psi, RPIC: 4 Maximum leakage = RPCC, RPEC: Counterbalance valves should be set 2 atin least 1.3 times the maximum load induced pressure. 3/min./1000 psi, RPKC: 5 in3/min./1000 psi. in Back pressure at port 2 is directly additive to the relief setting of the valve.
RPCC minimum setting for all spring ranges is 75 psi
Model Codes printed in Red are Preferred Versions and most readily available
RP C CC A
Nominal Capacity C 60 L/min. E 120 L/min. G 240 L/min. I 480 L/min.
Nominal Capacity C E G I K 12 GPM* 25 GPM 50 GPM 100 GPM 200 GPM
Version A Standard
$ 31.90 $ 36.20 $ 51.80 $ 97.30 $187.00
Control** +$ 0.00
Control**
Adjustment Range
Cracking Pressure
V Viton
Seal
Seal N Buna-N
L Standard Screw
+$ 0.00
C Tamper Resistant
H 70 - 280 bar
+$ 2.00
+$ 0.00
N Buna-N +$ 0.00
+$ 2.00
V Viton
A 70 - 280 bar
+$ 0.00
Adjustment Range Options: B 25 - 105 bar A, B, C, and W are standard set at 1000 psi. N Option is standard set at 400 psi. Q Option is standard set at 200 psi. * Minimum setting 75 psi on all ranges. Customer may specify pressure setting.
Adjustment Range Options: A and H are standard set at 210 bar. I and B are standard set at 70 bar. Customer may specify setting.
+$ 1.10
Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products. 6 US Shortcut Catalogue #999-901-243
Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products.
54
c
Atm. Reference
b
3 Pilot 2 Valve 2 Outlet Load 1
Capacity
Capacity 60 L/min.
Cartridge T - 11A a 34,9 b 22,2 L 74 CACA LHN Cavity Model Code 120 L/min. T - 2A 34,9 28,6 84 LHN 12 GPM T - 162A 1.22 3/4 2.11 RPCCCAEA LAN 7/8 31,8 2.00 96 1 1/4 1 5/8 2.44 2.81
Cavity
C 81 90
K 2.31
C 2.17
480 L/min. RPGCCAIA LHN 50 GPM T - 3AT - 19A 1.88 63,51 1/8 41,3 2.12 117 2.18 126 2.38 LAN
Inlet 1
Performance Curves
Performance Curves CAC* RPCC
20
5000
CAE*
RPEC
20
CAG*
20 Rise Typical Pressure
5000
CAI*
RPKC
20
P = bar
16 12 8 4 0 0 15
20
5000
16 12
5000
16 12 8 4 0 0 120
160 200 Q
5000
P = psi
P = psi
P = psi
P = psi
8 4 0 0 60
80
P = psi
4000
Free Flow
4000
Free Flow
4000
Free Flow
4000
Free Flow
30
30
40
60 1000 90
120
20 40 60
120
180
40
240
80 120
1000 240
360
80
480
10
15
Q = L/min. 25
I I
I
Flow = GPM
Flow = GPM
30
Q 50
= L/min. 0
Flow = GPM
Q 100
0 = L/min.
Flow = GPM
= L/min. 0
Flow = GPM
160
240
320 400
I I
I I
I I I I I
I
Load holding to 210 bar with 280 bar psi valve setting for CA*A, CA*K; 320 bar with 420 bar Maximum operating pressure = 5000 valve settingmaximum for CA*G, CA*L. at Port 2. Will accept pressure Maximum valve at reseat = 0,4 cc/min. Back pressure onleakage the tank port (port 2) is directly additive at a 1:1 ratio to the valve setting. Reseat exceeds 85% of set pressure Factory pressure settings established at 4 GPM Factory pressure setting established at 32,8 cc/min. Typical response time 10 ms. Free flow check cracking pressure = 2,8 bar Maximum leakage = RPCC, RPEC: 2 in 3 /min./1000 psi, RPGC: 3 in3/min./1000 psi, RPIC: 4 3/min./1000 psi, RPKC: 5 in3/min./1000 psi. in Counterbalance valves should be set at least 1.3 times the maximum load induced pressure.
RPCC minimum setting for all spring ranges is 75 psi
Model Codes printed in Red are Preferred Versions and most readily available
RP C CA
Nominal Capacity C 60 L/min. E 120 L/min. G 240 L/min. I 480 L/min.
Nominal Capacity C E G I K 12 GPM* 25 GPM
Control** +$ 0.00
Adjustment RangeCracking Pressure Seal Control** A 100 - 3000 psi B 50 - 1500 psi C 150 - 6000 psi +$ 0.00
Seal N Buna-N
L Standard Screw
+$ 5.00
N Buna-N +$ 0.00
50 GPM
C Tamper Resistant
H 70 - 280 bar I
+$ 2.00 +$ 1.00
+$ 0.00
+$ 2.00
V Viton
100 GPM
+$ 1.00
Adjustment Range Options: A, B, C, and W are standard set at 1000 psi. N Option is standard set at 400 psi. Range Options: Q Option is standard Adjustment set at 200 psi . isall standard set at 210 bar. * Minimum setting 75 psiH on ranges. I is standard set at 70 bar. Customer may specify pressure setting. +$ 1.10
F is standard set at 140 bar. G is standard set at 280 bar. Customer may specify setting.
Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products. 6 information on our full line of products. US Shortcut Catalogue #999-901-243 Visit www.sunhydraulics.com for detailed and complete technical
55
Relief Valves Counterbalance Valves PILOT OPERATED, BALANCED PISTON VENTED, 280 BAR MAXIMUM SETTING
Full Adjustment 5 Turns
Turn screw+clockwise - to reduce setting and release load. Complete Adjustment 4 Turns +
4 2 2
1 1
c b
b
Locating c Shoulder
4 Vent
3
Cartridge Dimensions Typical c Cartridge Dimensions Capacity Cartridge Cavity a b L C Typical c Model Code Capacity Cartridge Cavity a b 12 GPM 1.22 3/4 2.11 L 2.17 C RPCC LAN Code T - 162A Model L/min. RPEC CWCA T 21A 34,9 22,2 74 2.06 81 25 60 GPM T 10A 1.56 7/8 2.00 LAN LHN
3 Pilot
a Locating
a
Shoulder
Installation Torque Installation (lb. ft.) Torque 2.31 25/30 (Nm) K 2.25 2.38
L/min. RPGCCWEA 50120 GPM T - 3A T - 22A 1.88 34,91 1/8 28,6 2.12 84 LAN LHN 240 L/min. RPIC CWGA T - 23A 2.44 46 1 1/4 31,8 2.44 96 100 GPM T - 16A LAN LHN
2.18 90
480 L/min. RPKCCWIA T - 24A 3.13 63,51 5/8 41,3 2.81 117 2.94 126 3.06 200 GPM T - 18A LAN LHN
RPEC
RPGC
RPIC
RPKC
CWC*
5000 5000
CWE*
P = psi P = psi
4000 3000
CWI*
5000
P = psi
4000 3000
20
20
20
20
4000 3000 2000 1000 0 Piloted 80 Open 160 240 320 400
P = bar
P = bar
2000 1000 0 5
12
Free Flow
12
Free Flow
P = bar
P = bar
0 40
16
16
16 12
Free Flow
16 12 8
8 4 20 15 25 =0 GPM 0 15 30
I Q I I I I I I I I I I
8 4 30 40 50 0 GPM 0 30
8 4 60 80 100 0 GPM 0 60
10
Flow
45
60
Flow =
20
Flow =
40
Flow =
80
60
90
120
120
180
240
240
360
Flow = GPM
480
= L/min. Maximum
I I
Q = L/min. Q = L/min. Q = L/min. operating pressure = 5000 psi Will maximum pressure at Port 2. setting Loadaccept holding to 210 bar with 280 bar valve Back pressure on the tank port (port 2) directly additive at a 1:1 ratio to the valve setting. Maximum valve leakage at reseat = 0,4is cc/min. Factory pressure settings established at 4 GPM Reseat exceeds 85% of set pressure Typical response time 10 ms. Factory pressure setting established at 32,8 cc/min. Maximum leakage = RPCC, RPEC: in 3 /min./1000 psi, RPGC: 3 in3/min./1000 psi, RPIC: 4 Free flow check cracking pressure =2 2,8 bar in3/min./1000 psi, RPKC: 5 in3/min./1000 psi. Counterbalance valves should be set at least 1.3 times the maximum load induced pressure. RPCC minimum setting for all spring ranges is 75 psi
Model Codes printed in Red are Preferred Versions and most readily available
RP C CW
Nominal Capacity C 60 L/min. E 120 L/min. G 240 L/min. I 480 L/min.
Nominal Capacity C E G I K
Version
Control**
Seal
12 GPM* $ Pilot 31.90 A 3:1 Ratio L Standard Screw L 25 GPM $ 36.20 C Tamper Resistant K 1:1 Pilot Ratio C 50 GPM $ 51.80 K Handknob 100 GPM 200 GPM $ 97.30 $187.00
+$ 0.00Screw A 100 - 3000 psi Standard +$ 4.10 B 50 - 1500 psi Tamper Resistant +$ 5.00 C 150 - 6000 psi N 60 - 800 psi Q 60 - 400 psi W 150 - 4500 psi
+$ 0.00 NRatios Buna-N +$ 0.00 Pilot N Buna-N +$ 0.00 V Viton +$ 2.00 H 70 - 280 bar V Viton +$ 2.00 I 25 - 105 bar +$ 1.00 +$ 1.00 +$ 0.00
Adjustment Range Options: A, B, C, and W are standard set at 1000 psi. N Option is standard set at 400 psi. Q Option is standard set at 200 psi. ** See page 162 for information * Minimum setting 75 psi on all ranges. Adjustment Options: on Control Options Customer may specify pressureRange setting. +$ 1.10 H is standard set at 210 bar. ** See page 162 for information I is standard set at 70 bar. on Control Options Customer may specify setting. Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products. 6 US Shortcut Catalogue #999-901-243 Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products.
56
Relief Valves Counterbalance Valves PILOT OPERATED, BALANCED PISTON VENTED, 420 BAR MAXIMUM SETTING
Turn screw clockwise to reduce - load. setting + and release Complete Adjustment 4 Turns +
1 1
c b
b c Locating
4 Vent 3 Pilot
3
Shoulder
aLocating
a
Shoulder
Cartridge Dimensions Cartridge Dimensions Typical c Capacity Cartridge Cavity a b Typical c L C Capacity Model Code Cartridge Cavity a b L C Model 12 GPM 1.22 3/4 2.11 2.17 RPCC LAN Code T - 162A 60 L/min. T 21A 34,9 22,2 74 81 25 GPM T - 10A 1.56 7/8 2.00 2.06 RPEC CWCG LAN LFN L/min. RPGCCWEG T 22A 34,9 28,6 84 LFN 50120 GPM T 3A 1.88 1 1/8 2.12 2.18 90 LAN
Installation Torque Installation (lb. ft.) Torque (Nm) 2.31 25/30 40/50 2.25 30/35 60/70 2.38 45/50 K
200/215 150/160 465/500 350/375
240 L/min. RPIC CWGG T - 23A 2.44 46 1 1/4 31,8 2.44 96 2.47 101 2.69 100 GPM T - 16A LAN LFN 480 L/min. T - 24A 3.13 63,5 CWIG LFN 200 GPM T - 18A 1 5/8 41,3 2.81 117 2.94 126 3.06 RPKC LAN
RPEC
5000
CWE*
20
RPGC
Typical Pressure Rise Free Flow5000 and Pilot Open Pressure Drop 5000
P = psi P = psi
4000
CWG*
20
RPIC
CWI*
20
RPKC
5000
P = psi
P = bar
P = bar
2000 1000 0 5
12
Free Flow
2000 1000
12
Free Flow
P = bar
P = bar
3000
16
P = psi
3000
16
16 12
Free Flow
16 12 8 4 0
160 200
P = psi
4000
20
4000
4000
Free Flow
8 4 015
20 25
8 4 30 0
40 50
8 4 60 0
80 100
10
Piloted 0 Open10
Flow = GPM 0
15
I
30
45
60 Flow
20
= GPM 0
Piloted 0 Open 20
30
60
90
Flow 120
40
Piloted Open 0 40
= GPM 0
60
120
180
240
Flow = GPM 0
80
120
120
240
360
240
320 400
Q = L/min.
I I I I I I I I I I
I
Maximum operating pressure = 5000 psi Will maximum pressure at Port 2. setting Loadaccept holding to 320 bar with 420 bar valve Back pressure onleakage the tankat port (port 2) is directly additive at a 1:1 ratio to the valve setting. Maximum valve reseat = 0,4 cc/min. Factory pressure settings established Reseat exceeds 85% of set pressure at 4 GPM Typical time 10established ms. Factory response pressure setting at 32,8 cc/min. Maximum leakage = RPCC, RPEC: in 3 /min./1000 psi, RPGC: 3 in3/min./1000 psi, RPIC: 4 Free flow check cracking pressure =2 2,8 bar in3/min./1000 psi, RPKC: 5 in3/min./1000 psi. Counterbalance valves should be set at least 1.3 times the maximum load induced pressure. RPCC minimum setting for all spring ranges is 75 psi
Model Codes printed in Red are Preferred Versions and most readily available
Q = L/min.
Q = L/min.
Q = L/min.
RP C CW
Nominal Capacity C 60 L/min. E 120 L/min. G 240 L/min. I 480 L/min.
Nominal Capacity C E G I K
Version
Control**
Adjustment Range Cracking Pressure Seal Control** +$ 0.00 V Viton F 70 - 175 bar +$ 2.00 G 140 - 420 bar +$ 1.00 +$ 1.00 +$ 0.00 +$ 2.00 V Viton
Seal
12 GPM* $ Pilot 31.90 0.00Screw A 100 - 3000 psi G 5:1 Ratio L Standard Screw L +$ Standard 25 GPM $ Pilot 36.20 4.10 B 50 - 1500 psi L 2:1 Ratio C Tamper Resistant C +$ Tamper Resistant 50 GPM $ 51.80 K Handknob +$ 5.00 C 150 - 6000 psi 100 GPM 200 GPM $ 97.30 $187.00 N 60 - 800 psi Q 60 - 400 psi W 150 - 4500 psi
Adjustment Range Options: A, B, C, and W are standard set at 1000 psi. N Option is standard set at 400 psi. Q Option is standard set at 200 psi. ** See page 162 for information * Minimum setting 75 psi on all ranges. Adjustment Options: on Control Options Customer may specify pressure Range setting. +$ 1.10 F is standard set at 140 bar. ** See page 162 for information G is standard set at 280 bar. on Control Options Customer may specify setting. Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products. Visit www.sunhydraulics.com for detailed and complete technical information on our full line of products. 6 US Shortcut Catalogue #999-901-243
UK Shortcut Catalogue #999-901-244
57
58