Csa Rotordryer PDF
Csa Rotordryer PDF
Csa Rotordryer PDF
High performance, silent running, simple installation and maintenance, makes CSA compressor the top class of models currently available in the market. The use of highly reliable components and the high productive efficiency of our renewed assembly lines, results in a more reliable product. A rationalised layout, a lower number of components subject to wear and their ergonomic positioning, reduce operating costs.
Economical E
T direct-reading ES 3000 electronic regulator makes it possible to: The - manage all running operations, - perform machine control and regulation, - monitor irregularities, - stop the compressor in the event of emergency, - view the data on the machine's maintenance program.
Period Perio od of od f variable va ariab riable ble no-load bl no-load ad operation op ope oper ratio ration ation as s a function functi funct fun uncti ncti ctio on n of o consumption consum ns s mption tion = Energy saving
- Reduced energy cost = INCREASED SAVINGS - Reduced energy consumption mption = INCREASED ENVIRONMENTAL FRIENDLINESS
Silent running
Years of experience have been applied to the issue of noise levels with particular care taken in analysing the air flow inside the machine and the use of suitable panels with anti-noise devices. The care in assembly of the various components, and the absence of transmitted vibrations. All have enabled us to achieve results, which put even the standard version of our machine at the top of the market.
130
60-65
20 40
dB (A)
IVR
CSA range can fulfil industrial requirements up to 71 cfm with maximum reliability and efficiency whilst ensuring user friendliness, easy serviceability and low noise levels. Everything required from a compressor with technology you can trust.
Silenced dry air INTAKE FILTER COMPRESSOR with oil flooded asymmetric screws PREMIUM EFF1 Three-phase IP55 ELECTRIC MOTOR, euro-voltage, class F TRANSMISSION by means of V belts with automatically aligned belt tensioner OIL RESERVOIR with high efficiency air-oil separator filter 2-3 ppm OIL LEVEL visible via a sightglass Combined AIR-OIL COOLER in aluminium with fine fins OIL FILTER
External PRE-FILTER very easy to remove for cleaning Steel PLATE BASE handling from three sides Elegant SOUNDPROOFED BODY with polyester powder paint surface Control and command MAIN PANEL in a cabinet with a door locked with a triangular key STAR-DELTA STARTER for start up current reduction Control and command INSTRUMENT PANEL Main switch CONTROL PANEL comand and regulation with electronic controller ES3000 SAFETY DEVICES: Motor thermal protection High air/oil temperature Safety valve Minimum pressure valve
Flow Diagram
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Oil filter Air/oil separator filter Air/oil cooler Safety valve Thermostatic valve Pressure Control Display Oil tank Suction Electro-valve Air Suction filter Air End Cooling fan Electric motor EFF1 Temperature Control Transmission Group (Air) (Oil)
CSA TANK e CSA DRY are two industrial options for compressed air production. They are compact, pre-assembled and ready for use. Designed for small and medium-scale industrial needs. Ideal where space is limited or close proximity to the work site is required.
CSA Tank
- two versions : 270 and 500 liters - three pressures : 8 - 10 - 13 bars - twenty-two models : from 7,5 to 20 HP Atmospheric air compressed by the compressor is collected in the air receiver. The condensate produced can be drained through a valve at the bottom of the air receiver.
Air Receiver
Made of steel panels horizontally mounted on a fixed base, built and inspected according to current EEC regulations. Sturdy structure allows all components to be assembled without affecting the tank's stability.
CSA Dry
A unit for the compression, drying and filtering of compressed air, assembled on a fixed, horizontal air receiver. Available in: - two versions : 270 and 500 liters - three pressures : 8 - 10 - 13 bars - twenty two models : from 7,5 to 20 HP for delivery of dried and filtered compressed air in conformity with ISO 8573-1 Classes 1 - 4 - 1 (dust,water,oil). Atmospheric air is compressed by the compressor and stored in the air receiver, then filtered and dried before entering the air network. Condensates formed during the various compressed air treatment phases are automatically drained.
CDX dryer
For removing condensate in compressed air according to European environmental directives. Uses R134a ecological gas; with by-pass 4 A dryer featuring: - low dewpoint, - lower maintenance, - high reliability.
In the version with dryer, one has in a single solution: compressor, dryer, tank and filters in just 1.2 m (500 l) with the following advantages: - minimum space requirement and easy installation - no installation costs for the dryer and the filters (all assembled at the manufacturing factorys premises) - elimination of air leaks in pipes - the elimination of many pipes assures a minimum fall of pressure, increasing energy savings.
Easy maintenance
In designing this series of machines, special attention has been paid to the aspect of SERVICEABILITY. All the internal parts are easily accessible, and the oil level is visible from the outside, with no requirement to remove any panels.
Ordinary maintenance
Discharge of condensate Oil top-off Oil change Oil filter replacement Oil separator filter replacement
Investment 17%
IVR Principles
Most of the time, air demand is not constant in a network. The purpose of an inverter is to reduce the speed of the main motor to follow precisely the profile of the compressed air requirement. This results in reduced power consumption, bringing energy savings and a quick return on the investment incurred.
Maintenance 9%
Installation 2%
IVR Benefits:
Safe and easy operation
- EMC compliant: no electromagnetic interference to or from the electrical network. - ES3000 standard controller: comprehensive display and automatic control of the inverter. - Standard Inlet baffle: protects the inverter against dust whilst allowing ventilation. - Standard components: easy maintenance and availability.
Energy Savings:
- Soft start: protects the motor against stress at start up, and avoids current peaks. - Efficiency 1 motor: from a reputed Premium Brand, high efficiency for lower HP consumption. Speed regulation of the motor between minimum and maximum frequency brings maximum savings. - Constant pressure: no fluctuation between load and unload pressures. (1 bar = 7% energy). No unload cycles and energy wastage.
TECHNICAL DATA
Type
kg
kg
kg
CSA TANK 270 lt bar psi HP kW l/1' m/h cfm dB(A) Kg Kg 500 lt Kg
CSA 5,5/8 CSA 5,5/10 CSA 7,5/8 CSA 7,5/10 CSA 10/8 CSA 10/10 CSA 10/13 CSA 10/8 IVR
8 10 8 10 8 10 13 8
4 4 5,5 5,5 7,5 7,5 7,5 7,5 max min max min
600 485 820 670 1.153 1.000 810 1.153 461 1.000 400 1.665 1.435 1.210 max min max min 1.665 666 1.435 574 2.000 1.790 1.480 max min max min 2.000 920 1.790 823
36,0 29,1 49,2 40,2 69,2 60,0 48,6 69,2 27,7 60,0 24,0 99,9 86,1 72,6 99,9 40,0 86,1 34,4 120,0 107,4 88,8 120,0 55,2 107,4 49,4
21,2 17,1 29,0 23,7 40,7 35,3 28,6 40,7 16,3 35,3 14,1 58,8 50,7 42,7 58,8 23,5 50,7 20,3 70,6 63,2 52,3 70,6 32,5 63,2 29,1
60 60 64 64 64 64 64 64
CSA 10/10 IVR CSA 15/8 CSA 15/10 CSA 15/13 CSA 15/8 IVR
10 8 10 13 8
10 15 15 15 15
7,5 11 11 11 11
64 63 63 63 63
CSA 15/10 IVR CSA 20/8 CSA 20/10 CSA 20/13 CSA 20/8 IVR
10 8 10 13 8
15 20 20 20 20
11 15 15 15 15
63 65 65 65 65
10
145
20
15
65
260
325
410
360
445
Version: - CSA (Floor standing) and CSA IVR: gas 3/4" - CSA TANK (Tank mounted); gas 1/2" - CSA DRY (Tank mounted with dryer and filters); gas 3/4" Dimension mm: LxWxH - CSA (Floor standing): 995x655x1045-995x665x1045 (IVR) - CSA TANK & DRY (270 liters: 1535x655x1550; 500 liters: 1935x655X1680) - CSA IVR TANK & IVR DRY (270 liters: 1535x665x1550; 500 liters: 1935x665X1680)
65
1045 mm
5 mm
Note: n.a.= not available Size and weights without packaging First oil charge Standard Voltage V/Hz/Ph 400/50/3
995 mm
p. +61-7-3205-300
www.ceccato.com
6999100230
Design Manufacture, Sales and Service of air compressors, Air dryers and air lters
DISTRIBUTED BY
TECHNE