Flowcoat HS
Flowcoat HS
Flowcoat HS
Description
Flowcoat HS is a durable, high performance epoxy resin coating system with a good level of chemical resistance.
Typical Uses
Flowcoat HS may be used as a hard wearing coloured floor coating in areas such as factories, warehouses, plant and storerooms where chemical resistance is required.
Benefits
- Good chemical resistant - Hard wearing - Abrasion resistant - Aesthetically attractive brightens up dull factories and warehouses - Seamless and hygienic finish - Low maintenance
Project References
HK Trade Development Council, KLIA, Snow Jelly Factory, New Strait Time Newspaper Factory, Erisson Mobile Comm S/B, Glaxo Pharmaceutical, China.
Flowcoat HS (2 Coats)
Ocean Blue
Clipper Blue
Prepared Substrate
Forest Green
Pastel Green
Dark Grey
Tile Red
Goosewing Grey
Mid Grey
The applied colours may differ slightly from the examples shown above. Contact our customer services for a true colour sample or a sample or a special colour match.
www.flowcrete.com
Model Specification
Product: Flowcoat HS Finish: Gloss Thickness: 0.2 0.25 mm Colour: _______ Preparatory work and application in accordance with manufacturers instructions. Manufacturer: Flowcrete Asia Sdn Bhd Telephone: Customer Service - +603 6277 9575 The installation should be carried out by a Flowcrete approved applicator.
Technical Information
The figures that follow are typical properties achieved in laboratory tests at 20 oC and at 50% Relative Humidity.
Fire Resistance Slip Resistance Thermal Resistance Water Permeability Surface Hardness Chemical Resistance Abrasion Resistance BS476:Part 7: Surface spread of flame: Class 1 TRRL Pendulum Slip Test Dry 80 Wet - depends on specification Tolerant up to 60 oC Nil Karsten test (impermeable) 180 secs. Koenig Hardness Test Go to www.flowcrete.com Taber Abrader: 5 mg loss per 1000 cycles (1 kg load using CS17 wheels) BS8204:Part 2 Grade AR2 > 80 N/mm2 (BS6319) > 60 N/mm2 (BS6319) > 15 N/mm2 (BS6319) Greater than cohesive strength of 25 N/mm2 concrete. >1.5 MPa.
Substrate Requirements
Concrete or screed substrate should be a minimum of 25N/ mm2, free from laitance, dust and other contamination. The substrate should be dry to 75% RH as per BS8204 and free from rising damp and ground water pressure.
Flowcoat HS For actual coverage rates, refer to the appropriate project specification.
Detailed application instructions are available upon request.
Speed of Cure
10 oC Light traffic Full traffic Full chemical cure 48 hrs 72 hrs 12 days 20 oC 16 hrs 48 hrs 7 days 30 oC 12 hrs 40 hrs 7 days
Installation Service
The installation should be carried out by a Flowcrete approved applicator. Obtain details of our approved contractors by contacting our customer service team.
Flowcrete Asia Sdn Bhd is a division of the Flowcrete Group, world leaders in specialist industrial and commercial flooring. Systems available include: underfloor heating systems, floor screeds, surface damp proof membranes, decorative floor finishes, seamless terrazzo, car park deck waterproofing, tank lining systems. Our objective is to satisfy your Floorzone needs.
Clean regularly using a single or double headed rotary scrubber drier in conjunction with a mildly alkaline detergent. Visit our website for more information www.flowcrete.com.
Further Information
To ensure you are specifying a fit for purpose flooring for your project please consult our Technical Advisors on the number below or visit our website to register your interest in specifying one of the most durable floors on the market.
Important Note
Flowcretes products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request.
Flowcrete Asia Sdn Bhd (366254-X) The Flooring Technology Centre Lot 37631 & 37632, Jalan 6/37A, Taman Bukit Maluri, Industrial Area Kepong, 52100 Kuala Lumpur, Malaysia. Tel: +(603) 6277 9575 Fax: +(603) 6277 4645 Email: malaysia@flowcrete.com Flowcrete Asia Sdn Bhd is an RPM company
Flowcrete Thailand 252/119, Unit B12, 24th Floor, Maung Thai-Phatra Complex, Tower II, Rachadaphisek Rd, Bangkok,10320 Tel: + 662 693 0775 Fax: + 662 694 3295 E-mail: thailand@flowcrete.com
Flowcrete Vietnam Representative Office Suite 68A, Level 6, 6 Phung Khac Khoan St., Dist.1,HCMC, Vietnam Tel: + 84 8 823 4602 Fax: + 84 8 827 4842 E-mail: ngoc@flowcrete.com
Flowcrete (Hong Kong) Ltd Unit 1004, 10/F., COL Tower, World Trade Square, 123 Hoi Bun Road, Kwun Tong, Kowloon, Hong Kong. Tel: + 852 2795 0478 Fax: + 852 2795 4842 E-mail: hongkong@flowcrete.com
www.flowcrete.com
2008-06-01 ASIA