Chemicals Zetag MSDS Powder Zetag 4139 - 1010
Chemicals Zetag MSDS Powder Zetag 4139 - 1010
Chemicals Zetag MSDS Powder Zetag 4139 - 1010
ZETAG 4139
Revision date : 2010/10/28 Version: 1.0 Page: 1/6 (30506491/SDS_GEN_CA/EN)
Company BASF Canada Inc. 100 Milverton Drive Mississauga, ON L5R 4H1, CANADA
24 Hour Emergency Response Information CANUTEC (reverse charges): (613) 996-6666 BASF HOTLINE: (800) 454-COPE (2673)
2. Hazards Identification
Emergency overview Caution - Slippery when wet! NO PARTICULAR HAZARDS KNOWN. Organic powders may be capable of generating static discharges and creating explosive mixtures in air. Handle with caution.
State of matter: solid Colour: off-white Odour: odourless Potential health effects Primary routes of entry: Eyes Skin Inhalation. Ingestion. Irritation / corrosion: May cause slight irritation to the skin. Chronic toxicity: Carcinogenicity: None of the components in this product at concentrations greater than 0.1% are listed by IARC; NTP, OSHA or ACGIH as a carcinogen. Reproductive toxicity: No data for product. No effects anticipated
4. First-Aid Measures
General advice: Remove contaminated clothing. If inhaled: If difficulties occur after dust has been inhaled, remove to fresh air and seek medical attention. If on skin: Wash thoroughly with soap and water. If in eyes: Wash affected eyes for at least 15 minutes under running water with eyelids held open. If swallowed: Rinse mouth and then drink plenty of water. Check breathing and pulse. Place victim in the recovery position, cover and keep warm. Loosen tight clothing such as a collar, tie, belt or waistband. Seek medical attention. Never induce vomiting or give anything by mouth if the victim is unconscious or having convulsions. Note to physician Treatment:
5. Fire-Fighting Measures
Flash point: Suitable extinguishing media: dry powder, foam Unsuitable extinguishing media for safety reasons: water jet Additional information: If water is used, restrict pedestrian and vehicular traffic in areas where slip hazard may exist. Hazards during fire-fighting: carbon oxides, nitrogen oxides The substances/groups of substances mentioned can be released in case of fire. Very slippery when wet. Protective equipment for fire-fighting: Wear a self-contained breathing apparatus. Further information: The degree of risk is governed by the burning substance and the fire conditions. Contaminated extinguishing water must be disposed of in accordance with official regulations. not applicable
Personal protective equipment Respiratory protection: Wear a NIOSH-certified (or equivalent) organic vapour/particulate respirator. Hand protection: Chemical resistant protective gloves Eye protection: Safety glasses with side-shields. General safety and hygiene measures: Handle in accordance with good industrial hygiene and safety practice. Ensure adequate ventilation. Wearing of closed work clothing is recommended. Wear protective clothing as necessary to minimize contact. Handle in accordance with good industrial hygiene and safety practice.
( 1 %(m)) solution The substance / product decomposes therefore not determined. not determined Forms a viscous solution.
750 kg/m3
Environmental mobility: Information on: Anionic polyacrylamide Assessment transport between environmental compartments: Adsorption to solid soil phase is expected. ---------------------------------Other adverse effects: The product has not been tested. The statements on ecotoxicology have been derived from products of a similar structure and composition.
Land transport TDG Not classified as a dangerous good under transport regulations
Sea transport IMDG Not classified as a dangerous good under transport regulations
Air transport IATA/ICAO Not classified as a dangerous good under transport regulations
released / listed
Not WHMIS controlled. THIS PRODUCT HAS BEEN CLASSIFIED IN ACCORDANCE WITH THE HAZARD CRITERIA OF THE CPR AND THE MSDS CONTAINS ALL THE INFORMATION REQUIRED BY THE CPR.
We support worldwide Responsible Care initiatives. We value the health and safety of our employees, customers, suppliers and neighbors, and the protection of the environment. Our commitment to Responsible Care is integral to conducting our business and operating our facilities in a safe and environmentally responsible fashion, supporting our customers and suppliers in ensuring the safe and environmentally sound handling of our products, and minimizing the impact of our operations on society and the environment during production, storage, transport, use and disposal of our products.
msds@basf.com
MSDS Prepared on: 2010/10/28 ZETAG 4139 is a registered trademark of BASF Canada or BASF SE Due to the merger of CIBA and BASF Group all Material Safety Data Sheets have been reassessed on the basis of consolidated information. This may have resulted in changes of the Material Safety Data Sheets. In case you have questions concerning such changes please contact us at the address mentioned in Section I. END OF DATA SHEET