ANGLOCK D-Series Vises

D40 D675 D688 D810 D100

Accessories see pages 5-130 through 5-132

The original Kurt Anglock D-Series vises are designed for precision part clamping on basic machine tools such as knee-type mills, grinders and machining centers. D-Series vises are ideal for use in running production parts where datums, flatness and parallelism is important. You can precision bore, tap, drill, grind and finish with high accuracy on most parts made of die cast aluminum, steel, and iron in your Kurt Anglock vises. No other brand can give you the time proven accuracy of the Kurt Anglock vises. All Kurt vises have a friction reducing, needle bearing, thrust collar. The needle bearing increases jaw clamping pressure. Features: AngLock design assures the movable jaw does not lift. Hardened vise bed. Hardened jaw plates. Semi-hard steel screw. 80,000-PSI ductile iron body. Matching of bed height .001" available at an additional cost for the D40. and D100 vises. Matching of the keyway to the stationary jaw .001" is available at additional cost. Some models available in metric version. 10 year limited warranty. 5-136

ANGLOCK D-Series Vises

Torque Ft.-Lbs.

MANUAL VISE CLAMPING FORCE - LBS.

D675 D688

D40

D810

D100

10 1,653 989 1,129 20 2,923 1,776 2,242 1,834 30 4,103 2,848 3,337 40 5,241 3,628 4,148 2,843 50 6,513 4,365 5,379 60 7,807 5,432 6,310 4,349 70 6,111 6,977 80 6,721 7,968 5,706 100 7,042 120 8,688 140 10,413 160 11,596 180 200 220 240 260 280 300

1,698 3,300 4,686 6,623 7,842 9,970 11,429 12,792 14,681 16,163 18,124 20,563 22,093 24,077 26,277

DIMENSIONAL DATA
D40 D675 D688 D810 D100

A B C D E F G H J K L M N O P Q R S T U V W AA BB CC DD Ship Wt

2.250 4.000 12.340 2.562 0.500 1.115 1.355 1.235 0.547 4.000 1.281 N/A 0.687 2.500 3/8-16 6.380 5.750 2.625 4.590 0.531 1.000 9/16 3-7/8 5-3/4 8-7/16 10-5/16 32

2.875 6.000 16.750 3.562 0.688 1.485 1.980 1.735 0.725 4.800 1.540 1.390 0.940 3.875 1/2-13 8.750 8.250 3.813 6.710 0.656 2.000 3/4 7-1/2 10-1/2 13-1/8 15-7/8 78

2.875 6.000 16.810 3.562 0.688 1.485 1.980 1.735 0.725 4.800 1.540 N/A 0.940 3.875 1/2-13 8.750 8.250 3.813 5.667 0.320 1.860 3/4 8.80 11.500 14.320 17.030 78

3.310 8.000 21.810 4.686 0.813 1.965 2.450 2.200 1.075 6.190 1.865 1.670 1.220 4.750 5/8-11 11.500 11.000 4.940 8.500 0.880 2.375 7/8 10 13.5 17-1/4 20-3/4 158

3.875 10.000 27.500 5.875 0.813 2.465 2.950 2.937 1.320 8.630 2.225 N/A 1.625 5.750 3/4-10 14.500 13.250 6.188 10.590 0.940 1.690 1 9-3/4 14 19-3/4 24-3/4 300

5-137

VERSATILE LOCK Vises

Manual Hydraulic Air

Standard & Short

3600V

The Versatile Lock vise is the industry's ultimate single station CNC vise. It offers ultra-precision function through these important design features: The original, time proven Kurt AngLock design prevents parts from lifting upward under heavy clamping loads. The "pull-type" jaw clamping reduces jaw stationary deflection by at least 80%. The one piece vise body and stationary jaw provide greater strength while reducing weight.

Features: Can be mounted upright or on either side. Matched stationary jaw to keyway including the body height .001". .0005" clamping repeatability Footprint on the short version is 13". Ideal for the smallest machines. Hydraulic option is available as 3600H - Standard Hydraulic a complete package including the intensifier (specify foot or hand actuation). All air and hydraulic units feature a 1/4" vise stroke. Air vise has a precise and repeatable "gentle touch" for delicate parts. Some models available in metric. 10 year limited warranty. 3600A - Standard Air Optional internal hex available for 3600V only.

The 3600V shown mounted "back to back".

Makes a fast, easy and economical vise tombstone. Bases can be tailored for most HMC's.

5-138

VERSATILE LOCK Vises

Standard & Short
Air 3600A 3.187 6.000 15.060 2.750 0.688 1.485 2.750 1.735 0.725 4.500 2.250 5.000 0.937 3.875 1/2-13 2.000 4.250 3.000 1.380 0.630 1.940 3/4 5.640 0.630 6.000 N/A 11.250 N/A N/A N/A 7.220 1.030 5.000 75 3620A 3.187 6.000 12.940 2.750 0.688 1.485 2.750 1.735 0.725 4.500 2.250 5.000 0.937 3.875 1/2-13 2.000 4.250 3.000 1.380 0.630 1.940 3/4 5.640 0.630 4.000 N/A 9.250 N/A N/A N/A 7.220 1.030 5.000 3620H 3.187 6.000 12.940 2.750 0.688 1.485 2.750 1.735 0.725 4.500 2.250 5.000 0.937 3.875 1/2-13 2.000 4.250 3.000 1.380 0.630 1.940 3/4 5.640 0.630 4.000 N/A 9.250 N/A 2.410 3.375 N/A N/A N/A 69

DIMENSIONAL DATA
Manual 70 A B C D E F G H J K L M N O P Q R S T U V W X Y AA BB CC DD EE GG HH KK LL 3600V 3.187 6.000 15.060 2.750 0.688 1.485 2.750 1.735 0.725 4.500 2.250 5.000 0.937 3.875 1/2-13 2.000 4.250 3.000 1.380 0.630 1.940 3/4 5.640 0.630 6.000 9.500 11.250 14.750 N/A N/A N/A N/A N/A 69 3620V 3.187 6.000 12.940 2.750 0.688 1.485 2.750 1.735 0.725 4.500 2.250 5.000 0.937 3.875 1/2-13 2.000 4.250 3.000 1.380 0.630 1.940 3/4 5.640 0.630 4.000 7.500 9.250 12.750 N/A N/A N/A N/A N/A 64 Hydraulic 3600H 3.187 6.000 15.060 2.750 0.688 1.485 2.750 1.735 0.725 4.500 2.250 5.000 0.937 3.875 1/2-13 2.000 4.250 3.000 1.380 0.630 1.940 3/4 5.640 0.630 6.000 N/A 11.250 N/A 2.410 3.375 N/A N/A N/A 74

Side View

Front View

Jaw Positions

SHIP WT. LBS.

VISE CLAMPING FORCE-LBS.

Air PSI 10 20 30 40 50 60 70 80 90 100 Air 3600A 3620A

VISE CLAMPING FORCE-LBS.

Manual Torque Ft.-Lbs. Manual 3600V 3620V

VISE CLAMPING FORCE-LBS.

Hydraulic PSI Hydraulic 3600H 3620H

10 20 30 40 50 60 70 80

653 1,743 2,234 3,015 3,833 4,438 5,528 6,356

653 1,743 2,234 3,015 3,833 4,438 5,528 6,356

400 800 1200 1600 2000 2400 2800 3200

1.575 3,150 4,725 6,300 7,875 9,450 11,025 12,600

1,575 3,150 4,725 6,300 7,875 9,450 11,025 12,600

320 840 1,280 1,780 2,200 2,720 3,240 3,800 4,380 5,000

320 840 1,280 1,780 2,200 2,720 3,240 3,800 4,380 5,000

5-139

VERSATILE LOCK Vises

Manual Hydraulic Air

Reverse and Short Reverse

Use the Versatile Lock in this configuration for the added benefit of easier part programming in "Y" axis positive direction. It also reduces the "reach-over" distance making part loading safer and easier for the operator. Features:
Can be mounted upright or on either side. Matched stationary jaw to keyway including the body height .001". .0005" clamping repeatability Footprint on the short version is 13". Ideal for the smallest machines. Hydraulic option is available as a complete package including the intensifier (specify foot or hand actuation). All air and hydraulic units feature a 1/4" vise stroke. Air vise has a precise and repeatable "gentle touch" for delicate parts Some models available in metric. 10 year limited warranty.

5-140

VERSATILE LOCK Vises

Reverse and Short Reverse
DIMENSIONAL DATA
Manual 3610V 3630V 3.187 3.187 6.000 6.000 12.940 15.060 2.750 2.750 0.688 0.688 1.485 1.485 2.750 2.750 1.735 1.735 0.725 0.725 4.500 4.500 2.250 2.250 5.000 5.000 0.937 0.937 3.875 3.875 1/2-13 1/2-13 2.000 2.000 4.250 4.250 3.000 3.000 1.380 1.380 0.630 0.630 1.940 1.940 3/4 3/4 5.640 5.640 0.630 0.630 6.000 4.000 9.500 7.500 11.250 9.250 14.750 12.750 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 68 64 Hydraulic 3610H 3630H 3.187 3.187 6.000 6.000 12.940 15.060 2.750 2.750 0.688 0.688 1.485 1.485 2.750 2.750 1.735 1.735 0.725 0.725 4.500 4.500 2.250 2.250 5.000 5.000 0.937 0.937 3.875 3.875 1/2-13 1/2-13 2.000 2.000 4.250 4.250 3.000 3.000 1.380 1.380 0.630 0.630 1.940 1.940 3/4 3/4 5.640 5.640 0.630 0.630 6.000 4.000 N/A N/A 11.250 9.250 N/A N/A 2.410 2.410 1.940 1.940 3.375 3.375 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 73 68 Air 3610A 3.187 6.000 12.940 2.750 0.688 1.485 2.750 1.735 0.725 4.500 2.250 5.000 0.937 3.875 1/2-13 2.000 4.250 3.000 1.380 0.630 1.940 3/4 5.640 0.630 6.000 N/A 11.250 N/A N/A N/A N/A 7.220 2.100 1.030 5.000 5/8 74 3630A 3.187 6.000 2.750 0.688 1.485 2.750 0.725 2.250 5.000 0.937 3.875 1/2-13 2.000 4.250 3.000 1.380 0.630 1.940 3/4 5.640 0.630 4.000 N/A 9.250 N/A N/A N/A N/A 7.220 2.100 1.030 5.000 5/8 69

Side View

A B C 15.060 D E F G H 1.735 J K 4.500 L M N O P Q R S T U V W X Y AA BB CC DD EE FF GG HH JJ KK LL MM SHIP WT. LBS.

Bottom View

Rear View

Jaw Positions

VISE CLAMPING FORCE-LBS.

Air PSI 10 20 30 40 50 60 70 80 90 100 Air 3610A 3630A

VISE CLAMPING FORCE-LBS.

Manual Torque Ft.-Lbs. Manual 3610V 3630V

VISE CLAMPING FORCE-LBS.

Hydraulic PSI Hydraulic 3610H 3630H

10 20 30 40 50 60 70 80

653 1,743 2,234 3,015 3,833 4,438 5,528 6,356

653 1,743 2,234 3,015 3,833 4,438 5,528 6,356

400 800 1200 1600 2000 2400 2800 3200

1.575 3,150 4,725 6,300 7,875 9,450 11,025 12,600

1,575 3,150 4,725 6,300 7,875 9,450 11,025 12,600

320 840 1,280 1,780 2,200 2,720 3,240 3,800 4,380 5,000

320 840 1,280 1,780 2,200 2,720 3,240 3,800 4,380 5,000

5-141

Swivel Base

Vise Accessories ANGLOCK Swivel Base Parallel Keeper

Swivel base allows positioning in 1 degree increments. D688 vise shown mounted on D60-4-SA swivel base.
SWIVEL BASE
Order No. Part # Ship Wt. Fits These Vise Models

000-0000 D30-4-SA 7 lbs 000-0000 D40-4-SA 16 lbs 000-0000 D50-4-SA 20 lbs 000-0000 D80-4-SA 80 lbs

D30 D40 D50 D80,D810

000-0000 D60-4-SA 26 lbs D60,D675,D688

Part # KPS-6000

Parallel Keeper

Place your parallels in the vise against the jaws. Take the Parallel Keeper, squeeze it together and place it inside the parallels. Release the Parallel Keeper, it will push against the parallels, holding them against the jaws of the vise. It's that simple! Opens to 6 inches. Your new revolutionary labor saver, your "machinists third hand," is at work, saving part change time.

Shown with 3610V

5-142

ANGLOCK PT Series Vises

PT400A PT800A PTH400A PTH800A

Manual and Hydraulic

The AngLock PT Series vises offer high precision function through these important design features: The original, time-proven Kurt angLock design prevents parts from lifting upward under heavy clamping loads. The "pull-type" jaw clamping reduces stationary jaw deflection by at least 80% as the movable jaw is "pulled" into the stationary jaw and not pushed like standard screw type vises.

Features: "Pull-type" clamping means high precision and repeatability. Up to 20,000 lbs. precision clamping force. Can be mounted upright or on either side. CNC style allows compact spacing. Both sides ground square to within .001" with base and top. 80,000-PSI ductile iron body. Hydraulic option is available as a complete package, including the intensifier (specify foot or hand actuation). Matching of bed height .001" available at an additional cost. Matching of the keyway to the stationary jaw .001" is available at an additional cost. 10 year limited warranty.

The PTH800A shown mounted "back to back"

Makes a fast, easy and economical vise tombstone. Bases can be tailored for most HMC's.

5-143

ANGLOCK PT Series Vises

Manual and Hydraulic
VISE CLAMPING FORCE-LBS.
Hydraulic Hydraulic PSI PTH400A PTH800A 1,400

VISE CLAMPING FORCE-LBS.

Manual Torque Ft.-Lbs. Manual PT400A PT800A

10 1,453 20 2,740 30 4,090 40 5,257 50 6,297 60 80 100 120 140 160

1,637 3,447 3,895 4,764 6,065 8,023 9,947 10,337

2,380 1,800 3,100 2,200 3,820 2,800 4,880 2,900 3,000 5,240 3,400 6,100 3,500 4,400 5,300 6,200

9,100

11,560 14,620 17,560 20,120

DIMENSIONAL DATA
PT400A A B C D E F G H J K L M N O P Q R S T U V W X Y Wt Lbs. 4.093 11.438 2.750 0.500 1.115 2.188 1.235 0.547 4.000 1.410 2.060 9/16 0.687 2.500 3/8-16 0.500 0.530 0.250 N/A 4 6-3/4 8-9/16 11-5/16 32 Manual PT800A 8.156 19.875 4.500 0.813 1.985 3.500 2.200 1.075 6.690 2.062 3.120 7/8 1.220 4.750 5/8-11 0.700 0.530 0.250 N/A 7-3/8 12 15-3/16 19-13/16 159 Hydraulic PTH400A PTH800A 2.375 4.093 11.438 2.750 0.500 1.115 2.188 1.235 0.547 4.000 1.410 2.060 9/16 0.687 2.500 3/8-16 0.500 0.530 0.250 0.750 4 6-3/4 8-9/16 11-5/16 46 3.500 8.156 19.875 4.500 0.813 1.985 3.500 2.200 1.075 6.690 2.062 3.120 7/8 1.220 4.750 5/8-11 0.700 0.530 0.250 0.875 7-3/8 12 15-3/16 19-13/16 180

2.375 3.500

Ship

5-144

HDL AngLock Vise (4 inch)

MANUAL & HYDRAULIC

The HDL Anglock Vises are high density long vises with two clmping stations. They provide repeatable clamping to 0.0002 and combine high density with heavy duty features. Designed on a rugged 80,000 PSI ductile iron body with steel components, both models provide strength, rigidity and long term accuracy while absorbing machining vibration.
Features 1. Two clamping stations repeatable clamping to 0.0002. 2. Full 3 opening in each station with standard hard jaw system. 3. Jaws are indexable 180 degrees. 4. Manual and hydraulic models available. 5. Fast easy conversion between manual and hydraulic models. Part # HDHLM4-3-SA-KIT. 6. Maximizes the number of parts in the work envelope. 7. Adjustable pre-load feature allows you to minimize pre-load range thus reducing the turns of the handle to open or close the vise (manual version). 8. Holding block features the ability to clamp same or dissimilar sized parts and provides pre-loading ability in the front or back jaw (manual version). 9. Lifetime Iron Clad Warranty.

Jaws for HDL Vises are sold separately and available with the following options. Hard Jaws Machinable Aluminum Jaws Machinable Ductile Iron Jaws Aluminum Fixture Plate

OPTIONAL CONVERTIBLE KIT (HDLM6-CONVKIT) - JAW POSITIONS

HARDENED JAW POSITIONS (MANUAL VICE SHOWN)

OPTIONAL HARD JAWS SHOWN (MANUAL VISE SHOWN)

CONVERTIBLE OPTIONAL FOR CARVABLE JAWS (MANUAL VISE SHOWN)

5-145

HDL AngLock Vise (4 inch)

ACCESSORY JAWKIT WITH OPTIONAL 1.9 HEIGHT JAW

MANUAL & HYDRAULIC

SIDE VIEW

BOTTOM VIEW C

NON -USEABLE AREA (2X)

(4X)

(4X)

(4 X)

D E ABOVE SCREW HEAD(2X)

B

A
(2X)

5-146

HDL AngLock Vise (6 inch)

The HDL Anglock Vises are high density long vises with two clmping stations. They provide repeatable clamping to 0.0002 and combine high density with heavy duty features. Designed on a rugged 80,000 PSI ductile iron body with steel components, both models provide strength, rigidity and long term accuracy while absorbing machining vibration.

MANUAL & HYDRAULIC

Features Two clamping stations repeatable clamping to 0.0002. Full 4 opening in each station with standard hard jaw system. Jaws are indexable 180 degrees. Manual and hydraulic models available. Fast easy conversion between manual and hydraulic models. Part # HDHLM6-3-SA-KIT. Maximizes the number of parts in the work envelope. Adjustable pre-load feature allows you to minimize pre-load range thus reducing the turns of the handle to open or close the vise (manual version). Holding block features the ability to clamp same or dissimilar sized parts and provides pre-loading ability in the front or back jaw (manual version). Lifetime Iron Clad Warranty.

Jaws for HDL Vises are sold separately and available with the following options. Hard Jaws Machinable Aluminum Jaws Machinable Ductile Iron Jaws Aluminum Fixture Plate

OPTIONAL CONVERTIBLE KIT (HDLM6-CONVKIT) - JAW POSITIONS

HARDENED JAW POSITIONS (MANUAL VICE SHOWN)

OPTIONAL HARD JAWS SHOWN (MANUAL VISE SHOWN)

CONVERTIBLE OPTIONAL FOR CARVABLE JAWS (MANUAL VISE SHOWN)

5-147

HDL AngLock Vise (6 inch)

ACCESSORY JAWKIT WITH OPTIONAL 2.5 HEIGHT JAW

MANUAL & HYDRAULIC

SIDE VIEW

BOTTOM VIEW C

NON -USEABLE AREA (2X)

(4X)

(4X)

(4 X)

D E ABOVE SCREW HEAD(2X)

B

A
(2X)

5-148

CARVLOCK CLUSTERTOWER

Fast. Change all three jaws in a minute.

CTU6 Shown with DLU6ALU Jaw Kit Assembly

CTU4300 CTU4400 CTU4500 CTU6400 CTU6500 CTU6630

CTU6 shown with conversion kit (CTCU6KIT) assembly for single station vise application.

ClusterTower provides flexible holding options as shown in photo. Jaws on right are machinable aluminum, on left are machinable ductile iron.

Features: Cast iron integral vise tower - highly rigid to achieve workpiece immobility and to dampen cutter induced vibration. Ideal for todays high speed spindles. The most versatile high density tower system in the market. Four different jaw systems available - machinable aluminum or ductile iron jaws (in three heights), EZLock quick-change jaw plate system, and standard hard jaw plates. Center clamping area is fully covered 100% of the time. Famous Anglock design - minimizes movable jaw lift. Stationary and movable jaws repeatable to .001. Change jaw set in 1 minute. Hold multiple parts in eight clamping stations. Increase your part volume. Three standard base sizes. Custom bases available. Optional 4 conversion kit. (CTCU4-Kit) Optional 6 conversion kit. (CTCU6-Kit) Optional internal hex available. Metric version available.

5-149

CARVLOCK CLUSTERTOWER

Torque Ft.-Lbs.

VISE CLAMPING FORCE - LBS.

CTU4300 CTU4400

CTU4500

10 20 30 40 50 60

1,039 2,147 3,018 3,943 4,709 5,694

1,039 2,147 3,018 3,943 4,709 5,694

1,039 2,147 3,018 3,943 4,709 5,694

DIMENSIONAL DATA
CTU4300 CTU4400 CTU4500

A 300MM B 1.000 C 0.790 D 6.250 E 4.000 F 5.000 G 10.000 H N/A J N/A K 1/2 L N/A M 0.590 N 1.575 O 3.150 P 1/2-13 Q N/A R N/A S N/A T N/A U N/A V N/A W 16.240 X 15.200 Y 7.532 Z 0.562 AA 15.063 BB 9/16 CC 7/16 DD 0.600 EE 2.094 FF 5.844 GG 3.188 HH 7.079 JJ 3.188 KK 7.063 LL 2.124 MM 5.816 Est Ship Wt Lbs 350

400MM 1.250 1.970 6.250 4.000 6.299 12.598 6.250 12.500 5/8 1/2 0.708 N/A N/A N/A 2.165 4.330 2.953 5.906 5/8-11 .984 16.240 15.200 7.532 0.562 15.063 9/16 7/16 0.600 2.094 5.844 3.188 7.079 3.188 7.063 2.124 5.816 395

500MM 1.250 2.360 6.250 4.000 7.874 15.748 8.000 16.000 5/8 1/2 0.708 N/A N/A N/A 2.165 4.330 2.953 5.906 5/8-11 .984 16.240 15.200 7.532 0.562 15.063 9/16 7/16 0.600 2.094 5.844 3.188 7.079 3.188 7.063 2.124 5.816 515

5-150

JAW KITS for CARVLOCK TOWER

DLU4ALU - Jaw Kit DLU6ALU - Jaw Kit
Quick Change, Machinable Soft Jaws
Features: 90 degree indexable soft jaws (6061 - T6 Aluminum) can be machined to fit the shape of your part for inexpensive dedicated fixturing. Movable jaw blocks are indexable and machinable on all four sides. Allows machining over bolt holes in stationary jaw. Stationary jaws are keyed to the vise base for repeatability within .001

Quick Change, Machinable Ductile Iron Jaws

DLU4C - Jaw Kit DLU6C - Jaw Kit

Features: Movable jaw blocks are indexable and machinable on all four sides. Allows machining over bolt holes in stationary jaw. Movable and stationary jaws may be heat treated for longer life. Stationary jaws are keyed to the vise base for repeatability within .001

New EZLock Quick Change Jaw Plate System

DLU6EZL - Jaw Kit

Features: Jaws utilize EZLock quick change jaw plates. Unique jaw plate locating groove assures repeatability of .0005 or less in repeat set-ups. Jaw plates lock/unlock from top of vise EZLock jaw plates will accept new Groove Lock workstops. Stationary jaws are keyed to the vise base for repeatability within .001

DLU6J - Jaw Kit

Standard Jaws

Features: Hardened steel jaw plates. Stationary and movable jaws 1.78 high. Extra height allows higher clamping with less jaw deflection. Stationary jaws are keyed to the vise base for repeatability within .001

5-151

HDL CARVLOCK TOWER (4 inch)

Models: CTHDLM443, CTHDLM444, CTHDLM445

CTHDLM444AL (shown with optional machinable aluminum jaws)

This manually operated, eight station HDL Cluster Tower system features a ductile iron integral vise tower. Designed for use on mid-size and larger machining centers including horizontal and vertical machining centers with a fourth axis and indexable tables. This workholding system achieves workpiece immobility while damping cutter induced vibration. Features: High density vise tower system. Hold multiple parts in eight clamping stations. Increase part volume. Repeatable clamping to 0.0002. Each station delivers up to 5,870 lbs. of clamping force at 60 ft lbs of torque. Self-adjusting holding block of either front or back jaw for clamping the same or dissimilar sized parts. To further enhance fast operation, an adjustable pre-load feature reduces handle turns for opening and closing clamping stations. Ductile iron column insures strength, rigidity and long term accuracy. Jaw options available to fit your application. Select from Hard jaws, Machinable aluminum jaws, Machinable ductile Iron jaws. Jaws are indexable 180 degrees. Base sizes available include: 300mm, 400mm, 500mm. Elevated column makes clearing chips and contaminants fast and easy. Lifetime Iron Clad Warranty.
CLAMPING FORCE LBS. Hydraulic HDLM4 PSI

Torque- Ft. Lbs.

HDHLM4

10 20 30 40 50 60

1,040 2,125 3,140 4,040 4,980 5,870

1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500

775 1,450 1,900 2,550 3,100 3,700 4,200 4,800

CTHDLM444AL (shown with optional machinable aluminum jaws)

Jaws for HDL Towers are sold separately and available with the following options. Hard Jaws Machinable Aluminum Jaws Machinable Ductile Iron Jaws Aluminum Fixture Plate 5-152

HDL CARVLOCK TOWER (4 inch)

Dimensional Data HDL Long Cluster Tower CTHDLM444 MM Inch 400.00 15.748 31.750 1.250 50.00 1.970 158.75 6.250 101.60 4.000 203.20 8.000 317.50 12.500 160.00 6.299 320.00 12.598 M16SHCS 5/8 SHCS M12SHCS 1/2 SHCS 18.000 0.709 M16 x 2.0 55.00 2.165 110.00 4.330 75.00 2.953 150.00 5.906 25.00 0.984 449.60 17.701 457.53 18.013 415.92 16.375 200.03 7.875 15.00 0.590 3.05 0.120 14.28 0.562 EXT HEX EXT HEX 11.10 0.437 INT HEX INT HEX 34.92 1.375 65.10 2.563 9.53 0.375 M8 x 1.25 CTHDLM443 MM Inch A 300.00 11.811 B 25.40 1.000 C 20.00 0.790 D 158.75 6.250 E 101.60 4.000 F 158.75 6.250 G H 127.00 5.000 J 254.00 10.000 K M12SHCS 1/2 SHCS L M 15.00 0.590 N 40.00 1.575 O 80.00 3.150 P M12 x 1.75 Q R S T U 00.00 0.000 V 449.60 17.701 W 451.18 17.763 X 415.92 16.375 Y 200.03 7.875 Z 15.00 0.590 AA 3.05 0.120 14.28 0.562 BB EXT HEX EXT HEX 11.10 0.437 CC INT HEX INT HEX DD 34.92 1.375 EE 65.10 2.563 FF 9.53 0.375 GG M8 x 1.25 CTHDLM445 MM Inch 500.00 19.685 31.75 1.250 60.00 2.360 158.75 6.250 101.60 4.000 203.20 8.000 406.40 16.000 200.00 7.874 400.00 15.748 M16SHCS 5/8 SHCS M12SHCS 1/2 SHCS 18.000 0.709 M16 x 2.0 55.00 2.165 110.00 4.330 75.00 2.953 150.00 5.906 25.00 0.984 449.60 17.701 457.53 18.013 415.92 16.375 200.03 7.875 15.00 0.590 3.05 0.120 14.28 0.562 EXT HEX EXT HEX 11.10 0.437 INT HEX INT HEX 34.92 1.375 65.10 2.563 9.53 0.375 M8 x 1.25

A B C D E F G H J K L M N O P Q R

HARD JAWS HDLM4J-Jaw Kit MM Inch 59.538 2.344 76.200 3.000 73.812 2.906 28.321 1.115 101.600 4.000 13.894 0.547 31.369 1.235 17.450 0.687 63.500 2.500 M10 x 1.50

Jaw Accessories ALUMINIUM JAWS HDLM4L-Jaw Kit HDLM4L1.9-Jaw Kit MM Inch MM Inch 63.500 2.500 63.500 2.500 66.675 2.625 66.675 2.625 101.600 4.000 101.600 4.000 35.560 1.400 48.260 1.900 101.600 4.000 101.600 4.000 7.722 0.304 20.422 0.804 20.625 0.812 20.625 0.812 65.075 2.562 65.075 2.562

A B C D E F G H J K L M N O P Q R

Jaw Accessories Convertible Options DUCTILE JAWS HARD JAWS CARVABLE JAWS HDM4C-Jaw Kit CTM4300-230 CTHDLM443-338 MM Inch MM Inch MM Inch 63.500 2.500 66.675 2.625 101.600 4.000 35.560 1.400 101.600 4.000 13.894 0.547 13.874 0.547 101.600 4.000 115.494 4.547 196.850 7.750 169.060 6.656 57.150 2.250 57.150 2.250 7.722 0.304 20.625 0.812 65.075 2.562

5-153

HDL CARVLOCK TOWER (6 inch)

Models: CTHDLM644, CTHDLM645, CTHDLM646

CTHDLM644AL (shown with optional machinable aluminum jaws)

This manually operated, eight station HDL Cluster Tower system features a ductile iron integral vise tower. Designed for use on mid-size and larger machining centers including horizontal and vertical machining centers with a fourth axis and indexable tables. This workholding system achieves workpiece immobility while damping cutter induced vibration. Features: High density vise tower system. Hold multiple parts in eight clamping stations. Increase part volume. Repeatable clamping to 0.0002. Each station delivers up to 5,870 lbs. of clamping force at 70 ft lbs of torque. Self-adjusting holding block of either front or back jaw for clamping the same or dissimilar sized parts. To further enhance fast operation, an adjustable pre-load feature reduces handle turns for opening and closing clamping stations. Ductile iron column insures strength, rigidity and long term accuracy. Jaw options available to fit your application. Select from Hard jaws, Machinable aluminum jaws, Machinable ductile Iron jaws and Aluminum fixture plate. Jaws are indexable 180 degrees. Base sizes available include: 400mm, 500mm, 630mm. Elevated column makes clearing chips and contaminants fast and easy. Lifetime Iron Clad Warranty.
Torque- Ft. Lbs. CLAMPING FORCE LBS. Hydraulic HDLM6 PSI HDHLM6

10 20 30 40 50 60 70 80 90

1,540 2,520 3,350 4,310 5,750 6,860 7,460 8,410 9,790

CTHDLM644AL (shown with optional machinable aluminum jaws)

500 875 1000 1,600 1500 2,330 2000 3,130 2500 3,950 3000 4,750 3500 5,475 4000 6,350 4500 7,100 Hyd. Displacement 1.08 cubic inches

Jaws for HDL Towers are sold separately and available with the following options. Hard Jaws Machinable Aluminum Jaws Machinable Ductile Iron Jaws Aluminum Fixture Plate 5-154

HDL CARVLOCK TOWER (6 inch)

Dimensional Data HDL Long Cluster Tower CTHDLM645 MM Inch 500.000 19.685 31.750 1.250 60.000 2.360 215.900 8.500 152.400 6.000 203.200 8.000 406.400 16.000 200.000 7.874 400.000 15.748 M16SHCS 5/8 SHCS M12SHCS 1/2 SHCS 18.000 0.709 M16 x 2.0 55.000 2.165 110.000 4.330 75.00 2.953 150.00 5.906 25.00 0.984 570.230 22.450 548.380 21.590 533.400 21.000 258.880 10.192 19.50 0.750 3.960 0.156 19.050 0.750 EXT HEX EXT HEX 15.875 0.625 INT HEX INT HEX 28.580 1.125 79.380 3.125 9.530 0.375 M8 x 1.25 A B C D E F G H J K L M N O P Q R S T U V W X Y Z AA BB CC DD EE FF GG CTHDLM644 MM Inch 400.000 15.748 31.750 1.250 50.000 1.970 215.900 8.500 152.400 6.000 158.750 6.250 317.500 12.500 160.000 6.299 320.000 12.598 M16SHCS 5/8 SHCS M12SHCS 1/2 SHCS 18.000 0.709 M16 x 1.75 55.000 2.165 110.000 4.330 75.0000 2.953 150.000 5.906 25.000 0.984 548.380 22.450 548.380 21.590 533.400 21.000 258.880 10.192 19.050 0.750 3.960 0.156 19.050 0.750 EXT HEX EXT HEX 15.875 0.625 INT HEX INT HEX 28.580 1.125 79.380 3.125 9.530 0.375 M8 x 1.25 CTHDLM646 MM Inch 630.000 24.803 38.100 1.500 70.000 2.760 215.900 8.500 152.400 6.000 254.000 10.000 508.000 20.000 250.000 9.842 500.000 19.685 M16SHCS 5/8 SHCS M12SHCS 1/2 SHCS 18.000 0.709 100.000 3.937 200.00 7.874 M16 x 2.0 25.00 0.984 570.230 22.450 548.380 21.590 533.400 21.000 258.880 10.192 19.050 0.750 3.960 0.156 19.050 0.750 EXT HEX EXT HEX 15.875 0.625 INT HEX INT HEX 28.580 1.125 79.380 1.125 9.530 0.375 M8 x 1.25

A B C D E F G H J K L M N O P Q R

HARD JAWS HDLM6J-Jaw Kit MM Inch 68.326 2.690 103.170 4.062 101.600 4.000 37.719 1.485 151.610 5.968 18.415 0.725 44.069 1.736 23.876 0.940 98.425 3.875 M10 x 1.50

Jaw Accessories ALUMINIUM JAWS HD6AL-Jaw Kit HD6L2.5-Jaw Kit MM Inch MM Inch 82.550 3.250 82.550 3.250 90.630 3.568 90.630 3.568 127.000 5.000 127.000 5.000 43.890 1.728 60.960 2.400 152.400 6.000 152.400 6.000 13.260 0.522 30.330 1.194 24.640 0.969 24.640 0.969 84.120 3.312 84.120 3.312

A B C D E F G H J K L M N O P Q R

Jaw Accessories Convertible Options DUCTILE JAWS HARD JAWS CARVABLE JAWS HD6C-Jaw Kit CTHDM6J-CONVKIT CTHDLM6-CONVKIT MM Inch MM Inch MM Inch 82.550 3.250 90.630 3.568 127.000 5.000 43.891 1.728 152.400 6.000 21.590 0.850 18.415 0.725 141.605 5.575 145.415 5.725 254.640 10.025 256.540 10.100 68.326 2.690 79.760 3.140 13.260 0.522 24.610 0.969 84.120 3.312

5-155

DOUBLELOCK VISES

DL430 DL800
The DL430, DL640 and DL800 DoubleLock vises offer cost saving productivity by maximizing the number of parts in the work envelope.
Accessories see pages 5-130 through 5-132 Use your DoubleLock vise to it's full capacity with the DoubleLock convertible kit. The kit is available for the DL430 and DL800 vises. 1 year limited warranty. Features: Large Capacity - DL430 3" X 4" each station. Shown with optional convertible kit. - DL800 6" X 8" each station. Productivity multiple part workholding for better spindle utilization, reduced tool change time, and reduced machine travel from part to part. Accuracy repeatable clamping to .0002". Durability 80,000-PSI ductile iron body and steel components provide strength, rigidity and long term accuracy while absorbing machining vibration. Self-adjusting over the entire clamping range. Metric version available. Optional internal hex screw available. 10 year limited warranty.

OPTIONAL CONVERTIBLE KIT - JAW OPENING POSITIONS

FRONT MOVABLE JAW SET REAR MOVABLE JAW SET CONVERSION KIT'PLATE

Optional Convertible kit - Jaw opening positions

DLC430 - KIT DLC800 - KIT A B C D E F G H D (A+D) C (A) Ship Wt. Lbs 2 20 8.094 2.094 11.730 8.640 5.731 8 to 12 12 to 16 17 to 21 22 to 26 24 to 28 2.641 9.188 3.188

18 to 22 15 to 19

5-156

DOUBLELOCK VISES
Manual
DL800

VISE CLAMPING FORCE - LBS.

Manual Torque Ft.-Lbs. DL430

10 1,046 20 1,980 2,023 30 2,832 40 3,740 3,578 50 4,523 60 5,136 70 80 6,883 100 8,997 120 9.817

DIMENSIONAL DATA
A B C D E F G H J K L M N O P Q R S S1 T U V W X Y Z AA BB CC DD EE FF GG HH JJ KK Ship Wt DL430 2.375 4.000 16.125 2.094 7.750 1.340 5/8 0.120 1.115 3.090 1.235 0.547 0.687 2.500 3/8-16 0.375 1.688 5/16-18 N/A 5.000 3.937 3.750 0.813 0.625 0.6299 7/16 1.500 3.000 0.781 3.625 5/16 3.000 4.547 6.637 8.184 0.400 45 DL800 3.750 8.060 30.000 4.000 15.000 4.250 7/8 0.190 1.965 6.000 2.200 1.075 1.220 4.750 5/8-11 0.750 2.375 1/2-13 5/8-11 7.000 N/A 8.000 3.625 0.750 N/A N/A 2.500 5.000 1.000 7.500 1/2 6.000 8.925 13.075 16.000 N/A 250

5-157

DOUBLELOCK VISES

HYDRAULIC DLH430 DLH640 DLH800

The DLH430, DLH640 and DLH800 hydraulic DoubleLock vises from Kurt offer two clamping stations with a part capacity of 3" x 4" (DLH430), 4" x 6" (DLH640), and 6" x 8" (DLH800). The hydraulic DoubleLock vise provides repeatable clamping for high accuracy machining and handles a higher horsepower cut than the manual version. The compact design features a wide range of clamping forces up to 12,600 lbs. 1/4 stroke 1/8 per side Productivity multiple part workholding for better spindle utilization, reduced tool change time, and reduced machine travel from part to part. Durability 80,000-PSI ductile iron body and steel components provide strength, rigidity and long term accuracy while absorbing machining vibration. 10 year limited warranty. Intensifier, APD50-112, available in either hand (APD50-112-Hand) or foot (APD50-112-Foot) option. Purchase separately for the DLH430 and DLH640 models only. Consult factory for the DLH 800 model.

5-158

DOUBLELOCK VISES
VISE CLAMPING FORCE - LBS.
Hydraulic PSI DLH430 DLH640

Hydraulic
DLH800

400 800 1200 1600 2000 2400 2800 3200

1,310 2,600 3,900 5,200 6,550 7,850 9,150 10,500

1,575 3,150 4,725 6,300 7,875 9,450 11,025 12,600

1,575 3,150 4,725 6,300 7,875 9,450 11,025 12,600

DIMENSIONAL DATA
A B C D E F G H J K L M N O P Q R S S1 T U V W X Y AA BB CC DD EE FF GG HH JJ KK LL Ship Wt DLH430 2.375 4.000 15.812 2.094 7.750 N/A N/A 0.160 1.115 3.090 1.235 0.547 0.687 2.500 3/8-16 0.375 1.688 5/16-18 N/A 3.000 3.937 3.750 0.813 0.625 0.6299 1.500 3.000 0.781 3.625 5/16 3.000 4.547 6.637 8.184 5.150 2.938 50 DLH640 3.125 6.000 21.000 2.690 10.192 N/A N/A 0.093 1.485 4.060 1.735 0.725 0.940 3.875 1/2-13 0.438 2.125 3/8-16 N/A 5.000 3.937 5.500 1.188 0.625 0.6299 2.000 4.000 1.000 4.750 3/8 4.000 5.710 8.780 10.500 5.250 3.325 115 DLH800 3.750 8.060 30.000 4.000 15.000 N/A N/A 0.190 1.965 6.000 2.200 1.075 1.220 4.750 5/8-11 0.750 2.375 1/2-13 5/8-11 7.000 N/A 8.000 3.625 0.750 N/A 2.500 5.000 1.000 7.500 1/2 6.000 8.925 13.075 16.000 6.240 3.375 260

5-159

Self-Centering Vise
Accessories see pages 5-130 through 5-132

SCD430 SCD640

Kurt has two Self-Centering vises, a four inch jaw width (SCD430) and a six inch jaw width (SCD640). Jaw opening on the four inch model is 6.25", and 8" on the six inch. Centering accuracy from minimum to maximum opening is .0006" with .0002" repeatability. Both movable jaws are Anglock design with zero lift. With optional V-Jaws, the SCD640 can clamp a 6" diameter and the SCD430 can clamp a 4" diameter. A unique feature is an adjustment that allows the centerline of the jaws to be set. This is especially important when mounting several vises on one machine and all centerlines must match. Features: Lip seals on main screw. Chip guards. Hardened jaws. Hardened bed ways. 80,000-PSI ductile iron construction. 10 year limited warranty.

5-160

Self-Centering Vises
VISE CLAMPING FORCE-LBS.
Torque SCD430 SCD640

10 20 30 40 50 60

912 1,757 2,410 2,935 3,549 4,902 DIMENSIONAL DATA

SCD430

985 1,760 2,576 3,770 4,382 5,764

SCD640

A B C D E F G H J K L M N O P Q R S T U V W X Y Z AA BB CC DD EE FF GG HH JJ KK LL MM NN OO PP QQ RR Ship Wt Lbs

2.375 4.000 15.000 7.750 0.5005 2.440 9/16 1.115 4.000 3.000 0.250 0.188 0.312 3.000 3.312 5/16-18 1.235 0.547 0.687 2.500 3/8-16 0.871 0.690 0.700 0.250 0.550 1.000 0.813 3.750 5.000 3.937 0.625 0.630 5/16 3/8 1.000 6.250 5.540 10.790 10.090 15.340 3.000 40

3.125 6.000 20.500 10.250 0.6880 3.000 3/4 1.485 5.500 4.000 0.375 0.250 0.500 4.000 5.000 1/2-13 1.735 0.725 0.940 3.875 1/2-13 1.156 0.880 0.850 0.360 0.690 1.470 1.188 5.500 5.000 3.937 0.625 0.630 3/8 3/8 1.000 8.000 7.240 14.240 13.470 20.470 5.000 100

5-161

INNERLOCK & STANDARD VISE JAW PLATES

With the InnerLock jaw plates, it takes only 40 seconds to change. By minimizing down-time, the unique reversible feature saves you money on the jaw plates. Each jaw plate can be mounted in two directions, giving you two jaw plates for the price of one. For instance, the plain jaw plate when in the inverted position has a step for holding small parts closer to the spindle. Our small through-hole design allows for greater gripping surface.
Individual Jaws Jaw Type 4" Vise Part # Ship Wt. 6" Vise Part # Ship Wt. 8" Vise Part # Ship Wt.

Vise Accessories

INNERLOCK Jaw Plates

SINGLE STEP DOUBLE STEP ALUMINUM SERRATED DISPLAY BOARD BOLTS-D (4) PIECES

AJ400-32 AJ400-326 AJ400-234 AJ400-47

1 LB. 1 LB. 1 LB. 1 LB. 1 LB. 2 LBS.

AJ600-32 AJ600-234 AJ600-47

2 LBS. 1 LB. 2 LBS.

AK800-32

6 LBS.

AJ600-326 2 LBS. AK800-326 5 LBS. AK800-234 2 LBS. AK800-47 6 LBS. AJ600-235 3 LBS. AK800-235 7 LBS. AJ600-237 5 LBS. AK800-237 10 LBS. 00-3417 00-3417 00-3417 00-3481 00-3481

SEMI HARD STEEL AJ400-235 V JAW HARDENED & GROUND AJ400-237

AJ400-238 11 LBS. AJ600-238 11 LBS. AK800-238 11 LBS. 00-3353

BOLTS-PT (4) PIECES 00-3353 BOLTS-DL (4) PIECES 00-3348 BOLTS-DL (4) PIECES 00-3353 .

00-3417

INNERLOCK JAW PLATE DIMENSIONS Aluminum W L H W Soft Steel L H W Plain & Step L H STEP W L Double Step H ST 1 ST 2 W Serrated L H W L V-Jaw H SM LG

AJ400 0.730 3.969 1.374 0.730 3.969 1.374 0.547 3.969 1.374 0.125 0.547 3.969 1.374 0.250 0.500 0.547 3.969 1.374 1.125 AJ600 0.980 5.969 1.880 1.125 5.969 1.880 0.725 5.969 1.880 0.188 0.735 5.969 1.880 0.375 0.750 0.725 5.969 1.880 1.880 AJ800 1.230 7.969 2.440 1.230 7.969 2.440 1.075 7.969 2.440 0.250 1.075 7.969 2.440 0.500 1.000 1.075 7.969 2.440 2.375

3.969 1.374 0.100 1.500 5.969 1.880 0.125 3.000 7.969 2.440 0.150 4.500

Standard Individual Vise Jaw Plates

Jaw Type 3" Vise Part # Wt. 4" Vise Part # Wt. 5" Vise Part # Wt. 6" Vise Part # Wt. 8" Vise Part # Wt. 10" Vise Part # Wt.

HARDENED SOFT STEPPED SERRATED

D30-7 D30-32 D30-47

1 LB. 1 LB. 1 LB.

D40-7

1 LB.

D50-7 D50-32 D50-47

Part#

2 LBS. 2 LBS. 2 LBS.

Dim "A"

D60-7

2 LBS.

D80-7

5 LBS.

D100-7 D100-7

6 LBS. 6 LBS.

D30-7 SOFT 1 LB. D40-7-SOFT 1 LB. D50-7-SOFT 2 LBS. D60-7-SOFT 2 LBS. D80-7-SOFT 5 LBS. D100-7-SOFT 6 LBS. See InnerLock See InnerLock See InnerLock See InnerLock
Dim "B"

See InnerLock See InnerLock

Dim "C" Dim "D"

D100-47 6 LBS.
Description

60-32-1 60-236-1 60-236-2

1.693 1.505 1.130

.725 .725 .725 .980 1.125 1.875 .725 .725 .725

1.880 1.880 1.880 1.880 1.880 1.635 1.635 1.735 1.880

.610 .610 .610 .980 1.125 1.875 .610 .725 .725

STEPPED JAW STEPPED JAW STEPPED JAW ALUMINUM STEEL V JAW STEPPED JAW SERRATED JAW SERRATED JAW

*60-234-1 NONE

*60-234-1 is a carve your own pocket jaw plate. *60-235-1 is a carve your own pocket jaw plate. *60-47-1 Serrations are aggressive, cut to points will mark part *60-47-2 Serrations in both directions to .050 flats

*60-235-1 NONE 60-237-1 NONE LP60-32 *60-47-1 *60-47-2 1.469 NONE NONE

5-162

Vise Accessories
WORKSTOPS
D60-315 WSRL46 WSRLE46

GROOVE LOCK

Features: Simple, functional, integral workstop system Workstop does not interfere with part or spindle. Single bolt design for tightening workstop. Multiple parts can be located on the same jaw plate. GROOVE LOCK WORKSTOP
WSRL46 1 2 WRSLE46 3 4 5 D60-315 D40-315 WSRL46-86-SA Workstop assembly, suitable to use with 2" thru 6" jaw plates Extended length workstop assembly, suitable to use with 4" thru 6" jaw on outside. Can be used on right or left end of jaw. Note: To use in center of jaw length, locating ear must be shortened to clear the top of the stationary jaw area. 6" Groove Lock jaw plate (Not Reversible) 4" Groove Lock jaw plate (Not Reversible) Replacement clamp assembly

GROOVE LOCK Reversible Style Step Jaw Plates

REVERSIBLE STYLE STEP JAW PLATES

Vise Size Part # Dim "A" Dim B" Dim "C" Dim "D" Dim "E
2" 4" 6" CL2-316 .740 .615 .647 .672 .735 .547 .547 .547 1.950 3.969 5.969 D40-316 1.374 1.250 D60-316 1.880 1.700

Versatile, quick mounting workstops will work above jaws when gang mounting vises and space for a workstop does not exist. These Kurt workstops permit fast, accurate positioning and repetitive work. They team up with your AngLock precision vise for accurate parts production.

ANGLOCK VISE WORK STOPS

Part # D30-45 360PWS D80WS D100-45 Vise Size 4" Vises 6" Vises 8" Vises 10" Vises

360PWS

ANGLOCK Workstop
5-163

Vise Accessories
VISE KEYS
Hardened vise keys are used to align your Kurt vise to your milling machine table. Step keys are used when the keyway in the vise is different than that of the machine T-slot. Standard keys are used when they are the same width. HARDENED STEP KEYS (PAIR)
Vise Model Key Size Part #

HARDENED STANDARD KEYS (PAIR)

Vise Model Key Size Part #

4" Vises

1/2 x 5/8 1/2 x 7/16 1/2 x 3/8 11/16 x 5/8 11/16 x 13/16 11/16 x 3/4 11/16 x 9/16 11/16 x 1/2 13/16 x 7/8 13/16 x 11/16 13/16 x 3/4 13/16 x 5/8

D30-33A D30-33B D30-33C D50-33A D50-33B D50-33C D50-33D D50-33E D80-33A D80-33B D80-33C D80-33D

4" Vises 6" Vises

1/2 x 1/2 11/16 x 11/16 13/16 x 13/16

D30-50 D50-50 D80-50

6" Vises 8" - 10" Vises

8" - 10" Vises

HARDENED METRIC KEYS (PAIR)

Vise Model Key Size Part #

4" Vises 4" Vises 6" Vises

1/2 X 14 MM 1/2 X 18 MM 11/16 X 18 MM 13/16 X 18 MM

D30-33M14 D30-33M18 D50-33M18 D80-33M18

8" - 10" Vises

5-164

POWERLOCK Drawbar

Automatic and Mechanical Drawbar

PowerLock Drawbar is available for these popular mills:

Atrump, Acer, Acramill, Alliant, Anilam, Bridgeport, Chevalier, Clausing/Kondia, Comet, DoAll, Enco, Euro Source, Exa, Ex-Cell-O, Fortune, Fryer, Hurco, Jet, Kent, Klim, Dondia, Lagun, Lilian, Mega, Mighty, Millport, Milltronic, MSC, Robo Tool, Royal rutland, Seiki, Sharp, Shizouka, Siber-Hegner, South Bend, Southwestern, Supermax, Topwell, Tri-Onics, Webb, Wells-Index, Willis

Automatic and Mechanical PowerLock Drawbars Available for most manual & CNC mills with standard R-8 collets or 30 or 40 taper tool holders. Automate your present "Knee-Type" milling machines by installing a Kurt PowerLock Drawbar. PowerLock Drawbars reduce tool change time and allow more cutting time in the cycle. This eliminates waste. The whole process using the Kurt automatic or mechanical PowerLock Drawbar cuts the tool change time to one-fourth the time required to change tools manually with wrenches. An added benefit is consistent torque on the drawbar rod. When you multiply the time savings for every tool change on all of your mills, it can really add up. Feature: Easy installation - operator can install with no special tools (instructions provided). Reduces operator fatigue - improves productivity and safety. Eliminates drawbar tapping to free tool in collet - reduces operator abuse. Convenient control - eliminates operator stretching to reach the drawbar. Assures uniform collet tightening - prevents under tightening and tool slip or over tightening and drawbar breakage. Operates on shop air supply - filter/lubricator, regulator and gauge included with most units. Provides clean oiled air to ensure long life. Safety interlock on automatic models prevents accidental engagement. Used with present tooling - operates R-8, #30 & #40 taper tool holders. Additional special tool holders not needed. Machine your own Drawbar Kits. Available for R-8 collets, #30 or #40 taper tool holders. 1 year limited warranty.*
Note: All machines that have Erickson Quick Change Spindle, and are converted to a Power Drawbar will have sharp threads and drive keys exposed near the spindle nose. We recommend the installation of a 194-00 SA Erickson Spindle Nose Guard.

195-050 Drive Key Safety Collar

For 40 taper machines, eliminates pinching between tool holder and face of spindle. Use with V-flange tool holders (not LT-Flange) Requires slot thru tool holder flange.

5-165