4N37 Opto Salida Transistor
4N37 Opto Salida Transistor
4N37 Opto Salida Transistor
www.vishay.com
Vishay Semiconductors
Input-output coupling capacitance < 0.5 pF Industry standard dual-in-line 6 pin package Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC
APPLICATIONS
AC mains detection
i179004-14
Reed relay driving Switch mode power supply feedback Telephone ring detection Logic ground isolation Logic coupling with high frequency noise rejection
DESCRIPTION
This datasheet presents five families of Vishay industry standard single channel phototransistor couplers. These families include the 4N35, 4N36, 4N37, 4N38 couplers. Each optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. These couplers are Underwriters Laboratories (UL) listed to comply with a 5000 VRMS isolation test voltage. This isolation performance is accomplished through Vishay double molding isolation manufacturing process. Comliance to DIN EN 60747-5-5 partial discharge isolation specification is available for these families by ordering option 1. These isolation processes and the Vishay ISO9001 quality program results in the highest isolation performance available for a commecial plastic phototransistor optocoupler. The devices are available in lead formed configuration suitable for surface mounting and are available either on tape and reel, or in standard tube shipping containers.
Note For additional design information see application note 45 normalized curves
AGENCY APPROVALS
UL file no. E52744 (pending) cUL tested to CSA 22.2 bulletin 5A DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 (pending), available with option 1 BSI: EN 60065, EN 60950-1 FIMKO CQC
ORDERING INFORMATION
DIP-6
Option 6
PART NUMBER
PACKAGE OPTION
> 8 mm
8 mm typ.
AGENCY CERTIFIED/PACKAGE UL, cUL, BSI, FIMKO DIP-6 4N35-X000 DIP-6, 400 mil, option 6 4N35-X006 SMD-6, option 7 4N35-X007T (1) SMD-6, option 9 4N35-X009T (1) VDE, UL, cUL, BSI, FIMKO DIP-6 4N35-X001 DIP-6, 400 mil, option 6 4N35-X016 SMD-6, option 7 4N35-X017T (1) SMD-6, option 9 4N35-X019T Notes Additional options may be possible, please contact sales office. (1) Also available in tubes; do not put T on end. Rev. 1.8, 16-Jan-12
CTR (%)
Document Number: 83717 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Vishay Semiconductors
TEST CONDITION SYMBOL VR IF t 10 s IFSM Pdiss VCEO VEBO IC tp/T = 0.5, tp 10 ms ICM Pdiss t=1s VISO VALUE 6 60 2.5 70 70 7 50 100 150 5000 7 7 0.4 DIN IEC 112/VDE 0303, part 1 VIO = 500 V, Tamb = 25 C VIO = 500 V, Tamb = 100 C RIO RIO Tstg Tamb 2 mm from case, 10 s Tsld 175 1012 1011 - 55 to + 150 - 55 to + 100 260 C C C UNIT V mA A mW V V mA mA mW VRMS mm mm mm
Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering condditions for through hole devices (DIP).
Document Number: 83717 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Vishay Semiconductors
TEST CONDITION VCE = 10 V, IF = 0 VCE = 10 V, IF = 0 VCE = 60 V, IF = 0 PART 4N35 4N36 4N37 4N38 4N35 VCE = 30 V, IF = 0, Tamb = 100 C VCE = 60 V, IF = 0, Tamb = 100 C 4N36 4N37 4N38 SYMBOL ICEO ICEO ICEO ICEO ICEO ICEO ICEO ICEO CCE RIO CIO 1011 0.5 6 6 MIN. TYP. 5 5 5 MAX. 50 50 50 50 500 500 500 UNIT nA nA nA nA A A A A pF pF
Collector emitter capacitance coupler Resistance, input output (1) Capacitance, input output
Notes Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. (1) Indicates JEDEC registered value.
MIN.
TYP. 10 10
MAX.
UNIT s s
IF
+5V
IF
Oscilloscope R L = 1 M C L = 20 pF
10 % 0 tr td t on tp td tr t on (= td + tr) Pulse duration Delay time Rise time Turn-on time ts tf t off t
RL
ts tf t off (= ts + tf)
Document Number: 83717 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Vishay Semiconductors
1.8 1.7 Tamb = 0 C 1.6 Tamb = - 25 C 1.5 1.4 Tamb = - 40 C 1.3 T = - 55 C amb 1.2 1.1 Tamb = 25 C 1.0 Tamb = 50 C 0.9 Tamb = 75 C 0.8 0.7 Tamb = 100 C 0.6 0.1 1 10 100 IF - Forward Current (mA)
10 000
IF = 0 mA
1000
VCE = 40 V
20
40
60
80 100
30
IF = 15 mA
20 10 0 0 1 2 3 4 5
IF = 10 mA IF = 5 mA
20
40
60
80 100
1.2
IF = 10 mA VCE = 0.4 V
20 15
IF = 10 mA
10
IF = 5 mA
0.4 0.2 0 - 60 - 40 - 20
5
IF = 1 mA IF = 2 mA
0 0 0.1 0.2 0.3 0.4 VCE - Collector Emitter Voltage (sat) (V)
20
40
60
80 100
Document Number: 83717 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Vishay Semiconductors
1000
VCC = 5 V Tamb = 25 C Tamb = 0 C Tamb = - 40 C Tamb = - 55 C
100
10
0 0.1
10
100
1 0.1
10
100
1000
VCE = 5 V, IF = 10 mA Tamb = 25 C Tamb = 0 C Tamb = - 40 C Tamb = - 55 C
toff
100
10
ton
10
100
0.1 0.1
10
100
0
VCE = 5 V
- 20 - 40 Phase (deg) - 60 - 80 - 100 - 120 - 140 - 160 1 10 100 1000 f - Frequency (kHz)
Document Number: 83717 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Vishay Semiconductors
6.5 0.5
7.3 0.5
7.62 0.3
1.1 0.1 3.5 0.3 0.5 typ. 2.8 0.5 3.3 0.5
Option 6
7.62 typ.
Option 7
7.62 typ.
Option 9
7.62 typ. 3.5 0.3 0.1 0.1 3.5 0.3
0.6 min.
8 min. 11.05
1.52
PACKAGE MARKING
4N36 V YWW 25
Notes VDE logo is only marked on option 1 parts. Option information is not marked on the part. Tape and reel suffix (T) is not part of the package marking.
Document Number: 83717 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishays knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customers responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customers technical experts. Product specifications do not expand or otherwise modify Vishays terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 02-Oct-12