FRA Track Safety Standards-Ch 1 - Introduction-General Guidance-TCMChp1
FRA Track Safety Standards-Ch 1 - Introduction-General Guidance-TCMChp1
FRA Track Safety Standards-Ch 1 - Introduction-General Guidance-TCMChp1
Federal Railroad Administration Track Safety Standards Compliance Manual Chapter 1 Introduction/General Guidance
CHAPTER 1 .................................................................................................................................. 1 INTRODUCTION/GENERAL GUIDANCE............................................................................................ 1 Introduction to Track Inspection ............................................................................................. 1 Safety ..................................................................................................................................... 1 Track Inspections ................................................................................................................... 1 Opening Conference .............................................................................................................. 2 Closing Conference ................................................................................................................ 3
Safety
The first priority of the Federal Railroad Administration (FRA) is safety. Therefore, all activities are to be conducted with personal safety and the safety of accompanying personnel in mind. Inspectors shall conduct activities in accordance with the safety instructions contained in the General Manual. Roadway Worker Protection, Bridge Worker Safety, and Roadway Maintenance Machine Safety guidance is in the Railroad Workplace Safety Compliance Manual online at: http://www.fra.dot.gov/us/content/1719
Track Inspections
An Inspectors primary duty is to conduct inspections to determine whether the railroads are complying with the TSS and Railroad Workplace Safety (Bridge Worker Safety, Roadway Worker Protection, and Roadway Maintenance Machine Safety). Effective inspection requires identification, evaluation, and reporting of conditions and practices that fail to meet minimum Federal compliance requirements. Since the purpose of regular inspection activity is to evaluate the performance of the carrier and the carriers representatives in conducting thorough inspections and complying with the TSS, an inspection of track inspection records maintained by the carrier as required by 49 CFR 213.241 and 213.369 is necessary. Determine the adequacy of the carriers inspections by evaluating what is recorded on the carriers inspection reports, and determine if these reports reflect the actual conditions of the track structure. To conduct a thorough inspection, the following preparations are suggested: Obtain the names and locations of the supervisors territory to be inspected. Advise the supervisor of the territory to be inspected and invite them to have a railroad representative accompany you. Set a date, time, and location for the inspection.
1.1
If you must change the date, time, or location, make every effort to contact the carrier as soon as possible to advise them. Determine what, if any, transportation will be furnished by the carrier. Always have a copy of the TSS and the Compliance Manual as reference. Carry properly calibrated track measuring equipment (tape measure, level board, string line). If possible, have the following information before the inspection: o o o o o o o Timetables and Special Instruction for speeds and restrictions. Current slow orders. Recent carrier track inspection reports. Train, tonnage and hazardous material information. Current and recent program work. Current carrier RWP program. Current CWR program (if required).
For information on general FRA policy, refer to the General Manual Part IV Chapter 2 for issues such as property entry, refusal to permit inspections, forcible interference with official duties, and release for entry and strike or labor disputes.
Opening Conference
Before starting an inspection, Inspectors should introduce themselves to all present and obtain a list of individuals participating in the inspection. An inspector may then explain the reason for the inspection as: Regular to ensure the carriers inspection process is adequate in finding, reporting, and remedying non-TSS-compliant conditions. Follow-up or re-inspection of a regular inspection to ensure proper remedial action. Complaint of unsafe conditions by an individual, group or entity. Caution must be used to not to identify the complainant. It is not mandatory to divulge that you are on a complaint investigation, as it may compromise the investigation. Inspectors should consult with the Regional Track Safety Specialist. Accident investigations caused by derailments or accidents, etc. Waiver investigation for relief from TSS. ATIP FRA geometry car inspections (Chapter 3). Special Inspections such as focused inspections or program enforcement.
During the Workplace Safety Briefing prior to the inspection, all parties involved should understand that FRAs goal is to help the carrier improve safety, and we welcome suggestions and ideas.
1.2
Closing Conference
Upon completion of an inspection, the inspector shall provide the carrier representative a report with all conditions that do not meet minimum safety requirements. Field reporting is discussed in Chapter 2. The reporting of exceptions to the standards is discussed in Chapter 4.
1.3