Specification&Installation: - . MODEL: QVL - RCD510-V0 - . P/N: AD-0909-001
Specification&Installation: - . MODEL: QVL - RCD510-V0 - . P/N: AD-0909-001
Specification&Installation: - . MODEL: QVL - RCD510-V0 - . P/N: AD-0909-001
RCD 510
INDEX
Feature....3 Precaution..4 Main Spec...5 System Composition......6 Outline Dimension...7 External Appearance...8 Connector Pin Assignment..10 DIP Switch Setting..12 How to use remote.....13 OSD(On Screen Display)......14 How to use parking guide line .......18 Product Composition ..............20 Installation Structure ...............21 Installation guide.22 FAQ..26
-2-
-3-
-Precaution
- You must keep the car key taken off from the car while you work this and finally, connect power of the interface. - When to connect the interface cable, you must keep the power cable taken off. - You must work this at the environment without any static electricity or damages. - All of process on this installation should be done by professionals. - You must not break the labels attached on the board, if its broken, no warranty. - When you receive this package you have to check whether theres any parts not included and you have to contact us right away. - Our repair service do not accept any problems caused by users any fault or carelessness.
-4-
-Main Spec.
1. Input Spec. (MULTI VIDEO INTERFACE) -. 3 x A/V Input (External video source). -. 1 x CVBS(REAR CAMERA) Input. (Rear camera source) -. 1 x Analog RGB Input (Navigation System output) -. 1 x LCD Input (Car system Input) -. 1 x OEM Input
2. Output Spec. -. 1 x OEM Output -. 4 x Audio Select (12V power comes out from 4wires of cable by video, Navi mode) 3. Power Spec. - Input Power : 8VDC ~ 24VDC - Consumption Power : 12WATT, Max 4. Switch Input mode - Input Video MUTE Function : Possible to make each input mute by operating Dip S/W. - Possible to switch Input mode with Keypad(or Remote control) - Possible to switch Input mode with switch for source toggle
-5-
-System Composition
IR Switch for source toggle
MCU
DISPLAY
POWER CIRCUIT
A/V OUT
HEADREST MONITOR
Dip S/W
-6-
-Outline Dimension
125mm * 105mm * 22mm 125mm
105mm
22mm
-7-
-External Appearance
LED DIP S/W Remote LCD-OUT
From Interface
NAVI Touch From OEM BD (Touch OUT) To Touch Screen (Touch IN)
FPC
POWER
AV(IN/OUT)
RGB(IN) MODE
-8-
-External Appearance
POWER
AV(IN/OUT)
RGB(IN)
MODE
LCD-OUT
Remote
DIP S/W
LED
-9-
*Power Connect
*RGB-IN Connect
ACC (Red) GND (Black) CAN-H (N.C) CAN-L (N.C) MMI (N.C) SAFE (Violet) REAR-C (Grey)
R DATA (Red) G DATA (Green) B DATA (Blue) SYNC (White) GND (Black) N.C N.C
*NAVI Touch
Y+ X+ Y X-
-10-
ACC : 12v~24V GND CAN H (N.C) CAN L (N.C) MMI (N.C) SAFE REAR-C
1m
-11-
-DIP SW Setting
ON : DOWN, OFF : UP ; Default : all OFF
#PI N 1 2 3 4 5 FUNCTION RGB INPUT MUTE A/V 1 MUTE A/V 2 MUTE A/V 3 MUTE DIP S/W Selection ON : Skipping RGB Mode OFF : RGB Display ON : Skipping A/V 1 OFF : A/V1 Display ON : Skipping A/V 2 OFF : A/V2 Display ON : Skipping A/V 3 OFF : A/V3 Display N.C
N.C
7 8
-12-
POWER , PIP : N.C MENU : OSD Menu OK : Select : Up : Down : Left : Right *FACTORY MODE (Interface setting) : To press button for 2 sec, or MENU in sequence
-13-
IMAGE Menu
- BRIGHTNESS:It is used to adjust brightness of the screen. - CONTRAST: It is used to adjust distinction (Image noise clearness). - SATURATION: Adjust the saturation the picture. - HUE: It is used to adjust the display hue adjustment of the screen. - SHARPNESS: Adjust the sharpen or soften the picture. - USER IMAGE :select color of screen (only four type)
-14-
OSD Menu
- LANGUAGE - TRANSPARENT - H_POSITION : Move the position of AV sources to Left, Right - V_POSITION : Move the position of AV sources to Up, Down
-15-
UTIL Menu
- FACTORY RESET : Initializing of all values of OSD setting
(Impossible to reset of screen position, only possible for functions in OSD)
-16-
-Factory Mode
Factory Mode - Operated by pressing MENU of remote or
keypad in order.
Factory Mode
- IMAGE H-POSITION : Move to Left, Right - V-POSITION : Move to Up, Down - PARK - PARK ENABLE : Setting to use Parking guide line - H-POSITION : Move the lines to Left, Right - V-POSITION : Move the lines to Up, Down
-17-
* If you would like to remove this line, just select ON on the above process. After setting, once you put the gear to rear, the screen displays the parking guide line like the left picture no. 2.
-18-
-19-
Product Composition
- Navi Cable 1 EA - Power Cable 1 EA - IR cable 1 EA - FPC Cable 1 EA - Touch Cable 3 EA ( 8P , 4P , FFC )
Installation Structure
To MAIN LE D
NAVI TOUCH
DIP S/W
IR
LCD OUT
TOUCH(OUT)
TOUCH(IN)
FPC
POWER
A/V(IN/OUT)
RGB(IN)
MODE
Head Unit
Original FFC
Original Connector
AUDIO R AUDIO L
Monitor
VIDEO
Y e l
Y e l
R E D
W h i
-21-
-Installation Guide
1. Original FPC cable connection
After separating LCD and Head unit board, take apart the original FPC cable.
Connect the separated FPC cable to provided Interface FPC cable (TO LCD), connect the Interface FPC cable (To CTRL BD) to the original connector.
-Installation Guide
2. Touch Cable connection
After taking apart the original touch cable from LCD side, connect the provided interface touch cable. (Refer to the below how to connect)
Insert the provided Touch Out Cable to the original connector like the above picture.
Connect the original touch cable (FPC) to the provided Touch IN cable.
-Installation Guide
3. Daughter Connection
Interface
Connect daughter board with the other cables like the above picture
Fix the both edge points on the backside of LCD by supporter panel.
-Precaution in Installation
Recommended installation method
Like the left pictures, for safety, connect the original cable which was connected with Touch IN cable, after taking out to head unit side. Otherwise, LCD might be able to be damaged by contact error of LCD connector.
Connect Touch cable taken out to head unit side to out side like the left picture.
-FAQ
1. When can not change mode. -. Check if the IR Cable (Remote) is connected or not. -. Check if LED is turned on or not. If it is not turned on, Check if power cable is connected or not. 2. When the screen is displaying only black color. -. Check if 2nd LED is turned on or not. If it is not turned on, please check all video sources that you will connect with the interface is operating well or not. -. Check if interface is connected well -. Check if the touch cable interferes the connection between LCD and Head unit board
3. When displayed color of screen is not proper. (If its too dark or the color is not proper) -. Try to do Initializing in Factory, If the color of screen keeps on displaying wrong color, you have to ask manufacturer for the problem. -. Check if LCD is connected well with FPC cable of sub-board. 4. When Back-up camera is not displayed on the screen. -. Turn Dip S/W no.7 on. 5. When the mode you set is not skip. -. Check if Dip S/W is set in proper way. 6. When Main screen on the car is not displayed. -. Check if In/Out cables are connected well. If it keeps showing the same problem, you have to ask manufacturer for the problem. 7. When the screen is displaying only white color. -. Check if out cable is connected well. If it keeps showing the same problem, you have to ask manufacturer for the problem.
-26-