Schneider - TeSys Motor
Schneider - TeSys Motor
Schneider - TeSys Motor
Save space
45 and 55 mm widths Compact DC contactor S-shape and multiple tap-off busbar systems
Smaller
With a width of 45 mm up to 38 A and 55 mm up to 65 A, TeSys motor starters fit more easily into electrical enclosures.
Special busbar systems allow fast pre-wiring of power connections. Assemble a motor starter on a single rail with the S shape busbar system.
Increase automation
Direct Control Quickfit pre-wired control technology
The TeSys Quickfit pre-wired solution allows communication with PLCs via Advantys STB interface or a splitter box.
Save time
Spring terminals and Reverser kit Common accessories range
Simple manual unclipping of a terminal block allows you to combine the circuit-breaker with the contactor. Assembling a reverser becomes childs play. Using standard contactors, you can build your reversing starter in less than 2 minutes on the clock, without any risk of wiring errors. Flexibility using add-on blocks and accessories, that are common throughout the 9 to 65A motor starters range.
Increase safety
Mechanically linked auxiliary and mirror contacts ensure reliable return of information and allow you to include TeSys contactors in your safety applications.
Increase reliability
Spring terminals and Schneider Electrics new, patented terminal block technology ensure permanent tightening quality by compensating for cable creep.
Guarantee performance
Continuity of service is guaranteed by using tested combinations with high breaking capacity. Type 2 coordination allows operation to be resumed more quickly after a short-circuit fault.
Connection : GV2P, GV2ME, LC1D up to 32 A : by screw clamp terminal (for power and control spring terminal, add 3 at the end of
0.06
0.09
0.12...0.18
0.25
0.37...0.55
0.75
1.1...1.5
Connection : GV2L, GV2LE, LC1D & LRD up to 32 A : by screw clamp terminal (for power and control spring terminal, add 3 at the end of the reference
50/60 HZ B7 E7 F7 G7 M7 P7 U7 Q7 V7 N7 R7
* Only for LC1D40 to D65, please order LAD4DBL accessory for direct control from a PLC.
the reference selected). GV3P, LC1D40 to D65 : by EverLink terminal (for control spring terminal, add 3 at the end of the reference selected). Connection by lugs add the digit 6 at the end of the reference selected
2.2
5.5
7.5
11
15
18.5
22
30
selected). GV3L, LC1D & LRD3 : by EverLink terminal (for control spring terminal, add 3 at the end of the reference selected). Connection by lugs add the digit 6 at the end of the reference selected
(1) For spring terminal version, add 3 to the end of the reference, example: GVAN11 becomes GVAN113
Fault contact + instantaneous auxiliary contact Mounting position Left-hand side Front GV3 only
(2) For spring terminal version, add 3 to the end of the reference, example: GVAED011 becomes GVAED0113 (GV3 only)
(1) Protective end cover for unused busbar outlets, reference: GV1G10
LC1D
1F + 30 LADN13 3F + 10 LADN31 -
SIDE-BY-SIDE MOUNTING S-SHAPE BUSBAR SYSTEM < 38 A (with GV2 range) < 65 A (with GV3 range) GV3S (2)
(2) Can be associated with a combination reverser assembly
from 40 to 65 A LAD9R3
SEPARATE RELAY MOUNTING TERMINAL BLOCK < 38 A (for LRD) LAD7B106 < 65 A (for LRD3) LAD96560
2 4
1 3
MOUNTING WITH PRE-WIRED CONTROL TECHNOLOGY TESYS QUICKFIT MOUNTING KIT (for LC1D..3 contactor with spring terminals) Motor connection module - Direct Without relay LAD9AP3D1 Motor connection module - Reverser Without relay LAD9AP3D2 Parallel wiring module Advantys STB 4xRJ45 STBEPI2145
3 2 1
Electronic relay (for DC coil control) LAD9AP31 Electronic relay (for DC coil control) LAD9AP32 Splitter block LU9G02
4
2xHE10 / 8xRJ45
www.schneider-electric.com
ART. 831641