PDF Created With Pdffactory Pro Trial Version

1 2
Open the battery cover, put in two new AAbatteries (not attached)
according to the +/-symbol inside the battery pack as shown in the
figure.
1.Do not use old and new batteries or batteries of different
models at the same time.
2.n the event of battery leakage, take out the batteries, wipe
the battery compartment clean, and exchange new batteries.
3.f this remote control is intended to be not in use for a long
time, please remove the batteries.
A. Entering manuaI codes

Turn on the power switch of the household appliance to be
controlled (e.g. TV, VCR etc) manually, find the brand of the
equipment from the code table, set from the first code of the
brand by turns, repeat step 2-5 till find the applicable code. f
all codes are not applicable (or the brand is not listed in the
code table), please set according to method B.
Two methods (Method A/B) are provided to set this remote control,
any one of which can be used in operation.
-
Hold SET key, then press the
Type of Appliance Selection
Key, for example, for the first
TV, please press SET key +
TV1 key.
After indicator lights on,
release two keys
simultaneously.
nput the 4-digit code by turns:
Note: indicator shall flash once
after inputting one digit.
After inputting code,
indicator goes out.
Check if other keys are normal, if
it doesn't operate successfully,
please repeat step 2-6.
Turn on the power switch of
the home appliance to be
controlled (e.g. TV, video
recorder) manually, aim the
remote control at the receiving
window of the appliance.
Hold "SET" key, then press
the "Type of Appliance
Selection Key", for example,
for the first TV, please press
"SET" key + "TV1" key.
After indicator lights on,
release two keys
simultaneously.
Press "SET" key again and
then release it, indicator
flashes.
Then every two seconds press
the button of power (each press
will bring about different codes.)
When you can turn off the
controlled appliance, press the
button of type selection in 2
second to end the searching.
Turn on the home appliance,
check if other keys on the
remote control work normally,
if yes, the setting is successful,
if not, please repeat step 2-5 till
find the applicable code for
your home appliance.
B. ManuaI Auto Search Codes:
Find the first code for your
appliance from the code table,
for example: the first TV is AWA,
and the first code shall be 0026.
Light goes
out
AWA
Baihua
Baird
Axxion
0026,0027,0033,
0159,0160,0168,
0175,0189,0220,
0706,0708,0709,
0714,0730.......
0026,0033,0262
0031,0162,0737
0039
PDF created with pdfFactory Pro trial version www.pdffactory.com

Code Search Mode
After successfully search the code, please operate according to following
steps to get the code for controlling your home appliance.
Note: t means it is zero if the indicator doesn't flash.
Remote Control Distance:
During the usage of the remote controller, in case any problem
occurs or remote controller fails, please contact us promptly and we'll
do our utmost to serve you. However, random dismantling or repair of
the remote controller is not allowed and we'll not bear responsibility for
the remote controller that has been subject to random dismantling.
After Service
TechnicaI Parameters
About 8m (varies with electrical
appliance models)
DC 3V (AA dry battery, 2 units) Power Supply:
1.Press the "Type of Appliance selection Key" of the home appliance
(Such as TV1and VCR1),indicator flashes once
2.Press and hold the key"SET",then press the digit key"4" on the remote
control,and loose the two keys at the same time, please notice how
many times the indicators flashes, which indicates what the digit in the
unit's place of the four-digit code is
ten's place of the four-digit code is
hundred's place of the four-digit code is
thousand's place of the four-digit code is
Light goes
out
AWA
Baihua
Baird
Axxion
0026,0027,0033,
0159,0160,0168,
0175,0189,0220,
0706,0708,0709,
0714,0730.......
0026,0033,0262
0031,0162,0737
0039

1. SeIectati tipuI aparatuIui, LED-uI va paIpai o singura data
2 Apasati si mentineti apasat butonuI SET, apoi apasati butonuI
4 . EIiberati-Ie simuItan si numarati de cate ori paIpaie
LED-uI indicator.a cest numar reprezinta cifra unitatiIor din
coduI aparatuIui (a patra cifra).
3 . EIiberati-Ie simuItan si numarati de cate ori paIpaie LED-uI
indicator.acest numar reprezinta cifra zeciIor din coduI aparatuIui
(a treia cifra).
indicator.acest numar reprezinta cifra suteIor din coduI aparatuIui
(a doua cifra).
indicator.acest numar reprezinta cifra miiIor din coduI aparatuIui
(prima cifra).
Nota:in cazuI in care LED-uI indicator nu paIpaie, cifra cautata este 0

PDF Created With Pdffactory Pro Trial Version

Uploaded by

Copyright:

Available Formats

PDF Created With Pdffactory Pro Trial Version

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PDF Created With Pdffactory Pro Trial Version

Uploaded by

Copyright:

Available Formats

1 2

PDF created with pdfFactory Pro trial version www.pdffactory.com

PDF created with pdfFactory Pro trial version www.pdffactory.com

You might also like