PG - 0307 - Int - Unitronic Bus PB FD P
PG - 0307 - Int - Unitronic Bus PB FD P
PG - 0307 - Int - Unitronic Bus PB FD P
LFLEX
307
Cables for bus systems PROFIBUS-DP/FMS/FIP Characteristic impedance: 135 - 165 ohm
UNITRONIC BUS PB FD P
Benefits For use where the combination of a halogen Based on the bit rates listed, in accordance
65mm
Test voltage
Approvals
Core/core: 1500 V
Temperature range
and EN 50170, e.g. for SIEMENS SIMATIC NET, also suitable for FIP - Factory Instrumentation Protocol).
Design Foam Skin - core isolation (O2YS) Overall screening with copper braid and
Article number Article designation Number of pairs and conductor diameter (mm) Outer diameter (mm) For highly flexible applications (e.g. power chains) - conventional cable assembly 2170222 UNITRONIC BUS PB FD P 1x2x0,64 1 x 2 x 0.64 8.0 Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon request. Copper price basis: EUR 150/100kg. Refer to Appendix T17 for the definition and calculation of copper-related surcharges. Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths Packaging size: coil 30 kg or 250 m, otherwise drum Please specify the preferred type of packaging (e.g. 1 x 500 m drum or 5 x 100 m coils). SIMATIC is a registered trademark of SIEMENS AG. FIP is a registered trademark of World FIP Lapp Kabel is a member of the PROFIBUS user organisation (PNO) Photographs are not to scale and do not represent detailed images of the respective products.
Info
A for Advanced
Technical data
Mutual capacitance
Temperature range
Approvals
and EN 50170, e.g. for SIEMENS SIMATIC NET, also suitable for FIP - Factory Instrumentation Protocol).
Characteristic impedance
150 15 Ohm
Screening: wrapped with braided tinned Outer sheath: PUR compound Suitable connectors EPIC Data connectors 312
Copper index (kg/km) 30.1
Design Stranded bare copper wire Foam Skin - core isolation (O2YS) Overall screening with copper braid and plastic-laminated aluminium foil
Outer diameter (mm) 8.0
Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon request. Copper price basis: EUR 150/100kg. Refer to Appendix T17 for the definition and calculation of copper-related surcharges. Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths Packaging size: coil 30 kg or 250 m, otherwise drum Please specify the preferred type of packaging (e.g. 1 x 500 m drum or 5 x 100 m coils). SIMATIC is a registered trademark of SIEMENS AG. FIP is a registered trademark of World FIP Lapp Kabel is a member of the PROFIBUS user organisation (PNO) Photographs are not to scale and do not represent detailed images of the respective products.
APPENDIX
ACCESSORIES
copper wires
FLEXIMARK
free outer sheath with properties similar to PUR and enhanced flame-retardance is required Cables can be used for PROFIBUS-DP as well as PROFIBUS-FMS and FIP For highly flexible applications (power chains, moving machine parts)
with PNO specifications the following maximum cable lengths for a bus segment apply (cable type A, PROFIBUS-DP): 93.75 kbit/s = 1200 m 187.5 kbit/s = 1000 m 500 kbit/s = 400 m 1.5 Mbit/s = 200 m 12.0 Mbit/s = 100 m
65mm
Test voltage
Core/core: 1500 V
SILVYN
SKINTOP
UNITRONIC BUS PB FD P A
EPIC
HITRONIC
150 15 Ohm
ETHERLINE
free outer sheath with properties similar to PUR and enhanced flame-retardance is required For highly flexible applications (power chains, moving machine parts) Cables can be used for PROFIBUS-DP as well as PROFIBUS-FMS and FIP
with PNO specifications the following maximum cable lengths for a bus segment apply (cable type A, PROFIBUS-DP): 93.75 kbit/s = 1200 m 187.5 kbit/s = 1000 m 500 kbit/s = 400 m 1.5 Mbit/s = 200 m 12.0 Mbit/s = 100 m
Technical data
Mutual capacitance