Nothing Special   »   [go: up one dir, main page]
Scribd Logo
Upload

Welcome to Scribd!

  • 53 views

    Syllabus For Civil Engineering (Ce) : Mechanics

    Uploaded by

    Haja Peer Mohamed H
    The syllabus covers the key topics in civil engineering including structural engineering mechanics, structural analysis, concrete and steel structures, geotechnical engineering, water resources engineering, environmental engineering, transportation engineering, and surveying. Some of the main topics addressed are bending moment and shear force in beams, stress and strain, structural analysis of trusses and frames, concrete mix design and limit state design of concrete structures, design of steel tension and compression members, soil mechanics, shallow and deep foundations, fluid mechanics and hydraulics, water treatment processes, wastewater treatment, air pollution, solid waste management, and highway planning and traffic engineering.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Syllabus For Civil Engineering (Ce) : Mechanics

    Uploaded by

    Haja Peer Mohamed H
    53 views4 pages
    The syllabus covers the key topics in civil engineering including structural engineering mechanics, structural analysis, concrete and steel structures, geotechnical engineering, water resources engineering, environmental engineering, transportation engineering, and surveying. Some of the main topics addressed are bending moment and shear force in beams, stress and strain, structural analysis of trusses and frames, concrete mix design and limit state design of concrete structures, design of steel tension and compression members, soil mechanics, shallow and deep foundations, fluid mechanics and hydraulics, water treatment processes, wastewater treatment, air pollution, solid waste management, and highway planning and traffic engineering.

    Original Title

    ce

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The syllabus covers the key topics in civil engineering including structural engineering mechanics, structural analysis, concrete and steel structures, geotechnical engineering, water resources engineering, environmental engineering, transportation engineering, and surveying. Some of the main topics addressed are bending moment and shear force in beams, stress and strain, structural analysis of trusses and frames, concrete mix design and limit state design of concrete structures, design of steel tension and compression members, soil mechanics, shallow and deep foundations, fluid mechanics and hydraulics, water treatment processes, wastewater treatment, air pollution, solid waste management, and highway planning and traffic engineering.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    53 views4 pages

    Syllabus For Civil Engineering (Ce) : Mechanics

    Uploaded by

    Haja Peer Mohamed H
    The syllabus covers the key topics in civil engineering including structural engineering mechanics, structural analysis, concrete and steel structures, geotechnical engineering, water resources engineering, environmental engineering, transportation engineering, and surveying. Some of the main topics addressed are bending moment and shear force in beams, stress and strain, structural analysis of trusses and frames, concrete mix design and limit state design of concrete structures, design of steel tension and compression members, soil mechanics, shallow and deep foundations, fluid mechanics and hydraulics, water treatment processes, wastewater treatment, air pollution, solid waste management, and highway planning and traffic engineering.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    SYLLABUS FOR CIVIL ENGINEERING (CE)

    Structural Engineering Mechanics:

    Bending moment and shear force in statically determinate beams. Simple stress and strain relationship: Stress and strain in two dimensions, principal stresses, stress transformation, Mohr's circle. Simple bending theory, flexural and shear stresses, unsymmetrical bending, shear centre. Thin walled pressure vessels, uniform torsion, buckling of column, combined and direct bending stresses.

    Structural Analysis:
    Analysis of statically determinate trusses, arches, beams, cables and frames, displacements in statically determinate structures and analysis of statically indeterminate structures by force/ energy methods, analysis by displacement methods (slope deflection and moment distribution methods), influence lines for determinate and indeterminate structures. Basic concepts of matrix methods of structural analysis.

    Concrete Structures:
    Concrete Technology- properties of concrete, basics of mix design. Concrete designbasic working stress and limit state design concepts, analysis of ultimate load capacity and design of members subjected to flexure, shear, compression and torsion by limit state methods. Basic elements of prestressed concrete, analysis of beam sections at transfer and service loads.

    Steel Structures:
    Analysis and design of tension and compression members, beams and beam- columns, column bases. Connections- simple and eccentric, beam'column connections, plate girders and trusses. Plastic analysis of beams and frames.

    Geotechnical Engineering Soil Mechanics:


    Origin of soils, soil classification, three-phase system, fundamental definitions, relationship and interrelationships, permeability & seepage, effective stress principle, consolidation, compaction, shear strength.

    Foundation Engineering:
    Sub-surface investigations- scope, drilling bore holes, sampling, penetration tests, plate load test. Earth pressure theories, effect of water table, layered soils. Stability of slopesinfinite slopes, finite slopes. Foundation types-foundation design requirements. Shallow foundations-bearing capacity, effect of shape, water table and other factors, stress distribution, settlement analysis in sands & clays. Deep foundations pile types, dynamic & static formulae, load capacity of piles in sands & clays, negative skin friction.

    Water Resources Engineering Fluid Mechanics and Hydraulics:


    Properties of fluids, principle of conservation of mass, momentum, energy and corresponding equations, potential flow, applications of momentum and Bernoulli's equation, laminar and turbulent flow, flow in pipes, pipe networks. Concept of boundary layer and its growth. Uniform flow, critical flow and gradually varied flow in channels, specific energy concept, hydraulic jump. Forces on immersed bodies, flow measurements in channels, tanks and pipes. Dimensional analysis and hydraulic modeling. Kinematics of flow, velocity triangles and specific speed of pumps and turbines.

    Hydrology:
    Hydrologic cycle, rainfall, evaporation, infiltration, stage discharge relationships, unit hydrographs, flood estimation, reservoir capacity, reservoir and channel routing. Well hydraulics.

    Irrigation:
    Duty, delta, estimation of evapo-transpiration. Crop water requirements. Design of: lined and unlined canals, waterways, head works, gravity dams and spillways. Design of weirs on permeable foundation. Types of irrigation system, irrigation methods. Water logging and drainage, sodic soils.

    Environmental Engineering Water requirements:


    Quality standards, basic unit processes and operations for water treatment. Drinking water standards, water requirements, basic unit operations and unit processes for surface water treatment, distribution of water. Sewage and sewerage treatment, quantity and characteristics of wastewater. Primary, secondary and tertiary treatment of wastewater, sludge disposal, effluent discharge standards. Domestic wastewater treatment, quantity of characteristics of domestic wastewater, primary and secondary treatment Unit operations and unit processes of domestic wastewater, sludge disposal.

    Air Pollution:
    Types of pollutants, their sources and impacts, air pollution meteorology, air pollution control, air quality standards and limits.

    Municipal Solid Wastes:

    Characteristics, generation, collection and transportation of solid wastes, engineered systems for solid waste management (reuse/ recycle, energy recovery, treatment and disposal).

    Noise Pollution:
    Impacts of noise, permissible limits of noise pollution, measurement of noise and control of noise pollution.

    Transportation Engineering Highway Planning:


    Geometric design of highways, testing and specifications of paving materials, design of flexible and rigid pavements.

    Traffic Engineering:
    Traffic characteristics, theory of traffic flow, intersection design, traffic signs and signal design, highway capacity.

    Surveying
    Importance of surveying, principles and classifications, mapping concepts, coordinate system, map projections, measurements of distance and directions, leveling, theodolite traversing, plane table surveying, errors and adjustments, curves.

    You might also like