Int. Optico
Int. Optico
Int. Optico
Features:
Wide slot width: 0.375 (9.5 mm) Deep slot depth: 0.430 (10.9 mm) Selectable wire lengths from 6 (152mm) to 24 (610 mm) Seven popular connector options
L Package
Description:
The OPB815 consists of an infrared Light Emitting Diode (LED) and an NPN silicon phototransistor mounted in a low-cost plastic housing. The device is designed to switch electrical states when an opaque object is passed through the slot. The slot is wider and deeper than many slotted switches and will accommodate a variety of different materials. This device can be ordered with PCBoard solderable leads or with 26 AWG stranded, UL rated wire lengths from 6 (152 mm) to 24 (610 mm) and terminated with a variety of industry standard connectors. The result is an off-the-shelf sensor assembly tailored to the specific applications mechanical and electrical requirements. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information.
Applications:
Non-contact object sensing Assembly line automation Machine automation Equipment security Machine safety
Part Number OPB815L OPB815WZ LED Peak Wavelength 890 nm 890 nm
1
Ordering Information
Slot Width / Depth 0.375" / 0.430 0.375"/ 0.430 Aperture Emitter / Sensor None None Lead Length / Spacing 0.10" / 0.53" 24" / 26 AWG
OPB815WZ OPB815L
Pin #
1
DIMENSIONS ARE IN: [ MILLIMETERS] INCHES
Color
Red Black White Green
Description
Anode Cathode Collector Emitter
2 3 4
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 02/07 Page 1 of 3
OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
50 mA 2V 100 mW
30 V 5V 100 mW
Input Infrared LED (see OP240 for additional information) VF IR Forward Voltage Reverse Current 1.7 100 V A IF = 20 mA VR = 2 V
Output Phototransistor (see OP550 for additional information) V(BR)CEO V(BR)ECO ICEO Coupled VCE(SAT) IC(ON) Collector-Emitter Saturation Voltage On-State Collector Voltage 3.5 0.4 16 V mA IC = 500 A, IF = 20 mA VCE = 10 V, IF = 20 mA Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector-Emitter Dark Current 30 5 100 V v nA IC = 1 mA IE = 100 A VCE = 10 V, IF = 0, EE = 0
Notes: (1) All wires are 26 AWG stranded, UL rated. (2) Derate linearly 1.67mW/C above 25 C. (3) Methanol or isopropanol are recommended as cleaning agents. The plastic housing is soluble in chlorinated hydrocarbons and keytones. Top to Bottom (4) All parameters tested using pulse techniques. 0
Sensor 0 Width
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 02/07 Page 2 of 3 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
1.00
1.00
0.80
Left to Right Right to Left
0.80
Left to Right Right to Left
0.60
0.60
Top to Bottom
0.40
0.40
Top to Bottom
0.20
0.20
0.00 0.00
0.05
0.10
0.15
0.20
0.25
0.00 0.00
0.05
0.10
0.15
0.20
0.25
1.0
0.8
Left to Right
Right to Left
0.6
0.4
Top to Bottom
0.2
-40 C -20 C 0 C 20 C 40 C 60 C 80 C
0.0 0.00
0.05
0.10
0.15
0.20
0.25
10
15
20
25
30
35
40
45
50
Forward Current - mA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 02/07 Page 3 of 3