Nothing Special   »   [go: up one dir, main page]

Torque 1.6 THP 2010-14

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Notes Specified value Measured value

Vehicle identification
No. of cylinders Type 4/DOHC
Capacity (Fiscal) cc 1598
Compression ratio :1 11,5
Suitable for unleaded petrol Yes
Minimum octane rating RON 95
Ignition system Make Bosch
Ignition system Type Motronic MED17.4
Ignition system Description Map-DI
Trigger location Cam / Crankshaft
Fuel system Make Bosch
Fuel system Type Motornic MED17.4
Fuel system Description MFI-s
Air metering Type MAP
Combined ignition and fuel ECM Yes
Diagnostic socket Yes
Tightening torques
00000125 Cylinder head instructions
Cylinder head
Renew bolts Yes
Other engine tightening torques
Main bearings Renew bolts/nuts Yes
Main bearings Stage 1 30 Nm
Main bearings Stage 2 150°±5°
Big end bearings Renew bolts/nuts Yes
Big end bearings Stage 1 1)5 Nm 2)10 Nm
Big end bearings Stage 2 130°±5°
Oil pump to cylinder block 1)10 Nm 2)25 Nm
Sump bolts 12 Nm
Sump drain bolt 30 Nm
00000124 Flywheel/driveplate
Clutch pressure plate 20 Nm
00000096 Crankshaft pulley/damper centre bolt 50 Nm+180°
Crankshaft pulley/damper bolts 28 Nm
00000146 Camshaft sprocket/gear
Camshaft/rocker cover 9 Nm
Inlet manifold to cylinder head 20 Nm
00000119 Exhaust manifold to cylinder head 20 Nm
00000119 Exhaust downpipe to manifold 25 Nm
Water pump 9 Nm
Spark plugs 23 Nm
Lambda sensor (Oxygen) 47 Nm
Knock sensor (KS) 20 Nm
Chassis tightening torques
00000119 Front hub 325 Nm
00000119 Rear hub 300±30 Nm

Manufacturer: Peugeot Model: 308 (07-14) 1,6 THP 156


Engine code: EP6CDT (5FV) Output: 115 (156) 5800
Tuned for: R-Cat Year: 2010-14
Steering wheel 33 Nm
00000119 Steering rack/box mounting 100 Nm
00000119 Steering track rod end 45 Nm
Brake disc to hub Front 10 Nm
00000119 Brake caliper to carrier Front 27 Nm
00000150 Brake caliper/carrier to hub Front
Brake disc to hub Rear 10 Nm
00000119 Brake caliper to carrier Rear 34 Nm
00000119 Brake caliper/carrier to hub Rear 30 Nm+35°
ABS sensor Front 8 Nm
ABS sensor Rear 8 Nm
00000185 Road wheels 100 Nm

Autodata Note 96

Use new bolts.

Autodata Note 119

Use new nuts.

Autodata Note 124

Flywheel/driveplate

Use new bolts.


1) 8 Nm
2) 30 Nm
3) 90°

Autodata Note 125

Cylinder head bolts

Tighten bolts in the following stages:


1) 1-10 = 30 Nm + 90° + 90°
2) 11-12 = 15 Nm + 90° + 90°
3) 13 = 25 Nm + 30°
Coat bolts with Molykote G Rapid Plus E3 or equivalent.

Autodata Note 146

Camshaft sprocket/gear

Use new bolts.


Inlet = 20 Nm + 180±5°
Exhaust = 20 Nm + 90±5°

Autodata Note 150

Brake caliper carrier to hub

Use new bolts.


Bolt without washer = 33 Nm + 45°
Bolt with washer = 90 Nm + 45°

Autodata Note 185

Manufacturer: Peugeot Model: 308 (07-14) 1,6 THP 156


Engine code: EP6CDT (5FV) Output: 115 (156) 5800
Tuned for: R-Cat Year: 2010-14
Road wheels

Steel wheels:
After tightening slacken off 360°.
Retighten to specified torque.

Tightening sequence

Manufacturer: Peugeot Model: 308 (07-14) 1,6 THP 156


Engine code: EP6CDT (5FV) Output: 115 (156) 5800
Tuned for: R-Cat Year: 2010-14

You might also like