Nothing Special   »   [go: up one dir, main page]

Sunflo Solar Pumping Systems

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Solar Pumping Systems

Control Box (if provided)

Water Tank

DC
Isolator Battery (if fitted)

Solar Panel

Pump

Solar pumping is now firmly established as the technology for water supply in remote off-grid applications and also as the costs reduce increasingly for
general pumping duties. Dayliff have been leaders in the technology since the birth of the industry and today offer a wide range of options for every solar
pumping requirement imaginable. Particularly a range of competitive, high specification solar pumping systems have been developed for smaller scale
applications which are based on robust submersible solar pumps specially designed for PV powered water supply from wells and boreholes.
Together with the pump all systems include:-
• The appropriate specifications and number of Grade 1 PV modules with connectors for simplified installation
• Submersible drop cable and joint together with 10m module connection cable
• DC solar isolator with MCB control provided for module isolation
• Safety rope and HDPE pipe connectors
Module supports and piping are not included. The various systems offered give a wide range of duties, indicative performance being given. Full details of
pump performance and specification is given in the Dayliff Product Manual and should be referred to when selecting equipment.
SUNFLO-S SUNFLO-A SUNFLO-B
Positive displacement type of three All models are of helical Higher specification pumps of both helical rotor
chamber diaphragm design. They rotary screw stainless and centrifugal type that are provided with
are manufactured from high quality steel design for high separate controllers that feature MPPT
engineering plastics with stainless efficiency and feature an technology to maximise p u m p i n g
s t e e l c a s i n g . Pu m p s c a n b e inbuilt controller that output as well as providing
connected directly to a 24V PV power gives operating electrical protection and indicator lights
supply for daytime only pumping or protection for direct giving operating status. B a t t e r y
through a charge controller connection to the PV connection is also available for
connected to batteries for extended modules. All models are extended daily pumping.
daily operation. of narrow 3” diameter
specifically designed for
boreholes.

System Options
Input Motor Peak Open Cable
Pump Model Indicative Circuit PV Outlet
Voltage (V) Rating Voltage length,
Performance Voltage (VoC) Modules Size
Watts (V) 2.5mm2
SUNFLO-S 300 3m3/day at 60m 24 300 24 2x200W 60m
<50
SUNFLO-A 150H 2m3/day at 30m 24 150 ≥30 1x200W 30m
SUNFLO-A 270H 3m3/day at 50m 36 270 ≥45 <100 2x200W 50m ¾”
SUNFLO-A 600H 4m3/day at 70m 48 600 ≥60 <100 4x200W 70m
SUNFLO-B 120H 3m3/day at 30m 24 120 ≥30 <50 1x200W 30m
SUNFLO-B 500C 6m3/day at 40m 48 500 ≥60 <100 4x200W 40m 1”
SUNFLO-B 1000C 12m3/day at 70m 110 1000 ≥112 <200 8x200W 70m 1¼”
Note1: Greater water outputs will be available at lower heads
Note2: Actual performance will be determined by site conditions and irradiation levels.

You might also like