Nothing Special   »   [go: up one dir, main page]

Sidewall Belt Brochure

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Conveyor Solutions

Sidewall belts
Sidewall belts
When you need to transport material at steeper
angles than is possible with conventional conveyor
belts, Metso Sidewall belts are the way to go. Their
cross-stiff base belt and high-strength corrugated
rubber sidewalls combine with a variety of different
sized cleats to ensure your material stays in place.
Eliminating the need for material transfers, Metso
Sidewall belts offer you a space and energy efficient
way to transport material at up to 90° angles.
NEW!
Material properties
The base belt and cross-reinforcements can be made of either
textile fabrics* or steel cords, depending on the level of belt cross-
rigidity and strength your application demands. The sidewalls are
made of a high-strength rubber compound, so the belt is tough
enough to handle all kinds of materials. The cleats are made of
abrasion-resistant rubber compounds and come in a large range of Special features
shapes and sizes to match the conveying capacity of your applica- Several features make Metso Sidewall belts an economical and
tion. For extra strength, all sidewalls over 120 mm and cleats over environmentally-friendly choice. They prevent spillage at steep angles,
140 mm high are reinforced with fabric. thereby reducing material waste. They are also very hardwearing, which
Our Sidewall belts are assembled by hot-vulcanization, ensuring reduces maintenance work and lengthens the time between replace-
that all parts of the belt are bonded in the same process. Should the ments. Enabling conveying at steep angles, they save space on your
assembly process demand greater flexibility, cold-bonding with a site. And crucially, since conveying distances can be shortened, our
high-strength bond is also an option. In both cases, the cleats are Sidewall belts reduce energy consumption.
bolted to the sidewalls. * Note that textile fabric is not an option for high-strength belts

2 Conveyor Solutions
Cross-rigid base belts
Tensile Cover
Number Weight Min. pulley
Type Cross-section strength Cover type thicknesses
of plies [kg/m3] dia. [mm]
[N/mm] [mm]

Antiabrasive
XE 200 Heat resistant 2 2:2 9,8 200

315 2+1 4:2 11,3 315


500 Antiabrasive 3+1 4:2 13,2 400
XOE 630 Oil resistant 4+1 4:2 14,9 500
800 Flame resistant 5+1 4:2 17,8 630
1000 6+1 5:3 22,0 800
1250 6:6 25,3 630
1600 Antiabrasive 7:7 29,0 800
XST 2000 Heat resistant – 8:8 33,8 1000
2500 Flame resistant 8:8 36,2 1000
3150 8:8 39,8 1250
Antiabrasive
315 2+2 4:3 13,7 315
Oil resistant
XDE 500 3+2 4:3 15,5 400
Flame resistant
630 4+2 4:3 17,3 500
Heat resistant

Sidewalls

Sidewall Height Width Base width Pitch Weight Min. pulley


type [mm] [mm] [mm] [mm] [kg/m] dia. [mm]
80 44 50 42 1,6 200
N
100 44 50 42 1,8 250
120 66 75 63 3,1 315
160 66 75 63 4,1 400
200 66 75 63 5,1 500
S
240 66 75 63 6,1 630
280 66 75 63 7,9 700
300 66 75 63 8,3 800
300 88 100 84 12,0 800
ES
400 88 100 84 16,0 1000

Sidewalls

Type T75 T110 Type TCS280 TC360


Height [mm] 75 110 Height [mm] 280 360

Weight [kg/m] 1,65 2,20 Weight [kg/m] 18,5 22,0

Min. pulley dia. [mm] 200 300 Min. pulley dia. [mm] 700 700

Type TC10 TC140 TC180 TC220 TC260


Height [mm] 110 140 180 220 260

Weight [kg/m] 2,6 5,5 7,0 8,0 10,2

Min. pulley dia. [mm] 350 370 450 500 600

Conveyor Solutions 3
© Metso Corporation, 4184-04-20-EN-MSE

For contact or information about


your nearest sales office please visit:
www.metso.com

You might also like